Headset & Video Volume Problem

Phone operates like the ear buds are plugged in when it isn't. Texts & email notifications vibrate instead of sound notifications. Video volume slider only appears when the headset is actually plugged in. How do we fix this?

Hi RetiringSoon, (I'm jealous!)
The troubleshooting steps in this article may help you with this:
iPhone: Can't hear through the receiver or speakers
Resolution
Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
Make sure the Ring/Silent switch is not switched to silent.
While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
Restart the iPhone.
If restarting the iPhone doesn't resolve the issue, try restoring the device.
If the issue persists, go to the Service Answer Center - iPhone for information on service.
Hope this helps!
Judy

Similar Messages

Video volume problem

i am trying to convert video songs for my ipod in itune.
but when the conversion is done and i play my song .there is sound.but when i play the original copy in the itune i can hear the song . can anybidy help.

Hi there karandhanu
Welcome to the iMovie forum. You find many halpful and knowlegable people in the variuos forums, but you need to post to the right forum to get an answer to your particular issue. This forum for example is related to iMovie and its related applications to produce a movie. your question is about music and iPod. You should post in the iPod forum for better results.
Try this link and repost your topic
http://discussions.apple.com/category.jspa?categoryID=146
Some things you may want to add to your post would be how you are converting the audio, what is the source codec of the video you are trying to get the music from.
Good luck
Carl

Nokia Stereo Headset WH-205 Problem

Hi,
I have some problems using the headset come with my nokia E72 white:
1. When I listen to radio using the headset, the volume is really low, I have to keep pressing the answer button to make it loud. It goes back to low volume when I let it go.
2. When I am listening to music or watching video with the headset, I hear weird noise from the headset and again I have to keep pressing the answer button to make the sound clear. The same happens when I plug the headset into my computer.
Can someone help me with this? Is this a defect?
Thanks

Hello everybody. I bought a new nokia set e72 with my hard earned money and i only used it for two days and its giving me some problems, Im so down.
The problem is when i insert the WH205 HEADSET ,its bit loose ,i tried to insert it deep but i guess it doesnt go and when i move it ,it gives me voice sometimes at left ear side and sometimes at right ear side.
Also during this it restarts as well. I did a soft reset and hard reset as well. and i also saw some other discussions here to put it deep ,i tried but i think it doesnt go more into it.or may be thers some hardware fault.
I also checked my firmware update,,its not yet available at it. Can some body please tell me how to insert it or show me some pictures or some video,so tht i get some courage to apply more pressue,though i did but it feels like i might break soemthing inside.I tried to use the mic of the headset but it doesnt work also. I received a call. I was hearing the voice form other side but the other person wasnt hearing my voice.
Kindly help!!
Regards

MacBook Pro 15" video card problems (i think)

Can anyone tell me if this is indeed a video card problem?
MBP 15" info (Dec. 2011)
Processor 2.4 GHz Intel Core i7
Memory 4GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
OS X Lion 10.7.5
This is what happened:
I use my mbp heavily because I edit a lot of videos with Premiere. I also use lightroom / photoshop alot + games. I also installed Parallels desktop late 2013. I don't know if that is relevant but anyway. Everything started late 2013 (a little after installing parallels actually) when there are moments when the audio wouldn't work and I couldn't adjust the volume. It would come back anyway so i didn't mind it. Then the fans were on high speed for little activity. After that the keyboard backlight couldn't be adjusted and wouldnt work. I ignored all of these cuz i wasn't troubling me at the time. In January i left for france to study - I use bike all the time and once stupidly placed my laptop on the basket going to school (rough roads). I had a class with html so I had to open Parallels, my teacher pointed out the fans and how loud they were. That day, parallels desktop said i must upgrade to windows 9 or it will restart every 2hours. I didn't of course. I didn't have time to.
After that (a few days later i think) my laptop would randomly turn into a black screen but it's still on (the power LED is on) I tried turning it off by pressing down the power button and then turning it back on. It worked the first time. During the first week, the frequency of it happening grew. It would do it almost 3 times a day. during that same week I tried to do an SMC reset. It fixed the keyboard light, fans and audio but not the black screen thing. It just keeps on happening around 1-3 times a day. It only happens when I'm using it btw, never when I just leave it. ALSO, after a few days, it would take longer hours to open my mbp again. I mean, the screen would turn black. i would turn it off, then on again. I will ONLY hear the hard drive moving but no startup sound and no grey screen and apple logo. nothing.
The following weeks after that, I asked a friend to help me out. He suggested that I install gfxCardStatus because he said it might be my video card. He instructed that I keep it on intergrated only. So I installed that and did what he said I thought it worked for a while because the black screens stopped happening (even when gfx keeps on going back to dynamic) BUT NOW, MY LAPTOP WOULD FREEZE (not turn black). I'd shut it down using the power button but it still takes me hours to open it again. Sometimes, I'd wait for the battery to drain because it would startup when i charge it (sometimes)
I tried doing AHT as well to confirm the video card problem, but the results are no problems found. I really don't want to replace my logicboard here in france. everything is more expensive here. ;__;
Today I uninstalled parallels to see if that might have had anything to do with my problem now but i think that's just wishful thinking.
Can somebody tell me if this is really about the video card? Thank you

Your appointment at the genius Bar in an Apple Store (anywhere in the world) for an evaluation is FREE, in warranty or out. Those guys put their hands on these Macs all day every day, and they are especially good at Physical and Power problems.
Ask them.

Video Fullscreen problem

I have done a Video chat application. I have added full screen options to all videos.My problem is on clicking the Fullscreen button, the Application will be in Fullscreen Mode not the video. How to solve this. Code is shown below
In my Videopod component i have given like this
private function fullScreen() :void
                try {
                    switch ( Application. application. stage.displaySta te ) {
                        case StageDisplayState. FULL_SCREEN:
                            // switch to displayState = normal
                            Application. application. stage.displaySta te = StageDisplayState. NORMAL;
                            break;
                        default:
                            // switch to displayState = full
                            Application. application. stage.displaySta te = StageDisplayState. FULL_SCREEN;
                            break;
                } catch ( e:SecurityError ) {
                    // ignore
                    Alert.show( "cannot go to fullscreen mode. try setting: 'allowfullscreen = true' in HTML container", "security error" );
                //setCorners( );
                 VideoChatEventsDisp atcher.getInstan ce().dispatchEve nt( new VideoChatEvent( VideoChatEvent. ON_FULLSCREEN_ CLICK, this ) );
        ]]>
    </mx:Script>
<mx:Fade id="fadeIn" alphaFrom="0. 0" alphaTo="1.0" />
<mx:Fade id="fadeOut" alphaFrom="1. 0" alphaTo="0.0" />
    <mx:Canvas rollOver="showContr ols()" rollOut="hideContro ls()">
         <view:VideoContainer id="videoDisplay" width="200" height="170" />
        <mx:HBox x="0" y="0" width="100%">
            <mx:Label id="broadcastUserNa me" color="#E8F4F6" fontSize="15" fontWeight=" bold" visible="false" />
        </mx:HBox>
        <mx:HBox id="controls" horizontalAlign= "right" styleName="controll erStyle" width="100%" alpha="0.0" y="144" paddingRight= "5">
            <mx:HSlider id="volumeSlider" x="59" y="142" width="103"
                snapInterval= "1" value="50" maximum="100"
                 thumbDrag="updateVo lume(event) ;" dataTipFormatFuncti on="formatVolume ToolTip"
                liveDragging= "true" toolTip="Volume" />
            <mx:Button id="muteButton" toolTip="Mute" height="20" width="20" styleName="mute" toggle="true" click="toggleSound( )" x="170" y="142"/>
            <mx:Button id="fScreenBut" click="fullScreen( )" styleName="fullscre en" toggle="true" height="30" width="35" toolTip="Fullscreen "/>
        </mx:HBox>
    </mx:Canvas>
And in the main file i gave like this,
private function fullScreen() :void
             Application. application. stage.addEventLi stener( FullScreenEvent. FULL_SCREEN, fullScreenHandler );
             //screenMode = Application. application. stage.displaySta te;
         private function fullScreenHandler( e:FullScreenEvent ):void
                //screenMode = Application. application. stage.displaySta te + " ( fullScreen=" + e.fullScreen. toString( ) + ")";
                if (e.fullScreen) {
                    // do stuff for full screen mode
                } else {
                    // do stuff for normal screen mode

Had the same issue and found sth that worked for me on chrome.
It seems like google has developed its own flash player (pepper flash) rather then using the original adobe one. Disabling the pepper flash player and installing/enabling the adobe one seems to fix the issue.
Since the issue occured to me on all browsers except opera before there might be a similar fix for Safari.
heres where i found this and how to fix it:
http://newtriks.com/2012/12/01/how-to-disable-the-chrome-pepper-flash-player/

Continuing Speakerphone Volume Problem

After anxiously waiting three months for a firmware/software update that would fix the speakerphone volume problem I updated my two iPhones to v. 1.1.1. Unfortunately, neither of my iphones showed any increase in speakerphone volume.
We spoke to an Apple employee at our nearest Apple store (also the biggest and busiest Apple store in our area), and found out that if we wanted a speakerphone that we could use we should bring the phones in and have the Genius verify the low volume and give us a "part substitution" (which meant an opened iphone).
Instead (for various reasons) we decided to buy another IPhone, figuring "what are the chances that we would get three iPhones with very low speakerphones?" Also figuring that this very busy Apple store would have the latest IPhones available, with the speakerphone volume fixed. Apparently three is not the charm. Our new iPhone's speakerphone volume was just as low as our other two iPhones.
And our newest iPhone had the 1.1.1 update on it from the start. So I guess we will now try option (1).
For those of you who have had problems with the speakerphone volume and brought the IPhone back to the Apple store, were you able to find one with good speakerphone volume? I sure hope so!
Thanks!
Ashley

When people started complaining initially about the speakerphone issue. I brought my phone to my local Apple Store and the guy at the Genius Bar and I compared the speakerphone volume with the display phones. We did notice that mine was quieter than the rest. Because my phone was past the 14 day return period, my phone was sent out.
In all honesty, if there was an improvement, I would say it's very minimal. Long story short, I was able to swap out my phone for a brand new one and the speaker volume is relatively the same. Did the firmware 1.1.1 make it any louder? Not really. What I do notice is that the alert volumes have improved and that volume went up. But the speakerphone volume remained unchanged.
Personally this phone wasn't built for speakerphone use and you'll do better buying a bluetooth headset or a speakerphone instead. It's acceptable in a quiet environment but trying to use the speakerphone in public is out of the question.

MSI K7N2 Delta-ILSR, Mouse problem & Video off problem solved!!!

I find the following information that I collected very interesting at the very least...
Here goes...
The video off problem that I was having was directly linked to the mouse. Here, let me explain the video off problem. In the BIOS Have the Standby mode set to S3. The problem occurred when I started windows, then went into standby, then started back up, then restarted the computer, the monitor would act as if it were in sleep mode, or rather there was no signal being sent to the monitor. Well the odd way I fixed that is by plugging in a standard 2 button PS/2 mouse. Also this fixed the issue with the mouse sometimes not working in windows.
Here is how I tested.
Logitech MX700 Cordless Optical Mouse, PS/2 & USB= failed.
Logitech iFeel Optical Mouse, USB= failed.
Microsoft Cordless Ball Mouse, PS/2= failed.
Standard Artec (Cheapy brand) Ball Mouse (With no wheel), PS/2= All issues fixed, and passed.
When I said failed I do not mean they didn't work, I mean they sometimes didn't work and also caused the Video off problem after restarting the computer.
Obviously it isn't the ports (PS/2 or USB) that are the problem, it is more like the mouse itself, and the amount of buttons in particular. As you can see above the only mouse that works correctly is the one that only has 2 buttons, the rest has 3 or more buttons along with a Wheel. The MX700 has 8 buttons + wheel, WOW!
Anyways I figure out it was the mouse, and not the memory.
Obviously MSI needs to make a patch for this mouse problem.
I'm still having a hard time believing that the mouse caused the video not to work, but it is true! I spend well over 5 hours testing this crap. Every time with the mice with more then 3 buttons it messed up, and every time with the 2 button old fashion mouse it worked flawlessly!
MSI, get to work on a new BIOS to fix this mess!!! :]
BioHaz

Quote
Originally posted by Raven_
hi
its possible to use an ps/2 mouse AND a usb mouse at the same time.
i used the ps/2 mouse in windows and the usb mouse when playing games.
you can get some trouble if you do it the way i did it.
i was in windows surfing and the pointer just jumped all over the screen.
when i looked on the other side under a table a friends little kid played with the usn mouse. )
bye
LOL, that isn't what I'm talking about.
There seems to be a problem with my motherboard accepting mice with more then 2 buttons. It works the first time, but if you restart the computer, the video goes off. If you have both installed, it still messed up.
BioHaz

Anyone know when Apple will bring out a patch to fix the volume problem you get on mac mini after downloading OS 10.8.5

Anyone know when Apple will bring out a patch to fix the volume problem you get on mac mini after downloading OS 10.8.5?

Only Apple knows the answer to whether or not there is a verified problem and if so when will a fix be released. As is their custom, Apple does not talk about these things and the rules of these communities prohibit speculation about future udates or upgrades. It is probably safe to say if a fix is deemed necessary it will be called OS X 10.8.6.

'Source play' and 'audio-video sync' problems with PE8 on fast WIN7 64 bit computer

I am transferring Hi8 videos, about 2 hours long, to my WIN7 64 bit computer with PE8. [Dell Mobile Precision M4400 Computer Workstation (Intel Core 2 Duo T9900 500GB/4GB); NVIDIA Quadro FX 770M, 512MB] I seem to have several problems:
First, after importing the file (.avi), I get a message about ‘dropped frames.’
Secondly, when I try to play the video in the source monitor, the audio plays but the video doesn’t; it only shows the first frame [this is after waiting until the video is ?recognized? ] I can use the shift-arrow key and see that the video is there.
Thirdly, I can play the .avi file in other players, e.g., avidemux or PE pro CS5 on another computer. There, I see that the audio and video are not in sync; the audio can be up to 300 ms ahead of the video (as determined using avidemux).
Questions:
1. Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

"I think you're telling me you're using a backwards compatible Digital8 camcorder to capture your video as DV-AVIs. Is that right?" YES
"Are you using Premiere Elements to do this capturing?" YES, AS ABOVE PE8
"Go to the File menu and select Properties. It should show a standard DV codec being used for your video and audio."
WMP v12 is dumb. Under properties, media, it says 'video.' However, avidemux gave me the information state above: video -- Codec 4CC: dvsd, frame rate: 29.971 fps; audio -- codec: PCM, channels: Stereo, frequency: 48 kHz.
So, back to the Questions:
1. Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

Video signaling problem caused by 1.9, 2.0 BIOS (pointing out a BIOS problem)

Hi, i have a problem with the video signal. At random times when i boot up my computer, the computer would power up but there is no signal to the monitor. there is no hdd activity (via the hdd led) and nothing seems to be happening just that the fans are whirring. i have to unplug the computer then plug it again then turn it up again which sometimes repeats the problem. This is very irritating! So i did a little bit of troubleshooting:
1. I changed video cards. I used a SAPPHIRE ati radeon 9600XT fireblade and a LEADTEK GF4 ti4200. Both cards were causing the same problem and when i used both cards to another computer, there is no problem. = NOT A video card problem
2. used differnt kinds of drivers Cat 3.10, 4.10, 4.20 (omega and official) does not seem to do anything (which also i believe the drivers are OS dependent and its the bios of the vid card that starts up the vid card)
3. upgraded from 1.9 to 2.0 BIOS. still the same problem
4. reverted from 2.0 to 1.7 BIOS. the problem ended.
BTW, the board is 865PE-Neo2 - S. on a Intel 2.6Ghz C, 512MB TwinMos ram with m-tec chips, 80gb hdd, enermax 300w psu
so ive' solved the problem, and i just wanted to point out that there is a problem with 1.9, 2.0 BIOS. (havnt tried the 1.8 tho)

Wish I had seen this thread 2 weeks ago, but you did save me from buying a new graphics card. That was the last step (before chucking this mobo completely) in my attempts to fix the same problem. It didn't bother me too much, except I also couldn't get any DVD player (tried 3) to work. Would boot sometimes and at others gave a blue screen video error.
Flashing to bios 1.7 was the only thing that fixed it. Tried different memory, updating software, various combinations of drives, etc. For the record I tried bios 1.8, 1.9, 2.0, and 2.1. Not sure what about those updates causes problems but there definitely is something wrong.
Thanks.

The Video Out Problem...Fixed?

I know Wikipedia can be edited by virtually anyone with membership and an opinion, but I had to know.
It said that an itunes update 1.0.2 fixed the video out problem...does that mean that videos can now be connected to a TV and play on the TV? They fixed that?
I am still ever in the market for the nano, just waiting until the right ammount of money to purchase one. Thanks

I think it is currently working according to this knowledgebase article: http://docs.info.apple.com/article.html?artnum=300233
That is, for the new Nano, you can use the older iPod Universal Dock (ie the normal one that has been available for a couple of years) together with an iPod composite video cable or an SVideo cable (ie all currently-available stuff you may have already bought for a previous-series video iPod), OR you can use the brand new "Apple Universal Dock" with the brand new Apple Composite AV Cable or with the (new) Apple Component AV Cable, OR you can use one of those brand new Apple AV Cables directly with the Nano (without the new Apple Universal Dock).
What you cannot do is connect an old video cable or accessory, which was expecting to get composite video from the RCA/audio jack on the Nano, because it looks like (on the new Nano and the Classic) the audio out jack is now just for audio out and video is only available via the dock connector on the iPod.
ted.h.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive but many are not showing up in Aperture.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive with import date not created date, but many of these same files are not showing up in Aperture. Sometimes the clips actually show up with the current import but take on the video information from a previously imported file.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

Video import problem from iphone5 to PC giving error

Hi evereyone,
I have iphone 5. I try to import my videos but am not able to import all, its giving error. I tried also using windows live photo still same prob. the imported videos have problem in playing. I tried with vlc, quick time, the frames are broken and audio video lag. Please help me how i can import all and rum smoothly.

Ilan_B wrote:
Every time I plug my iphone 5 into the laptop (using windows 7) the easiest way is to right click on the portable device (iphone icon) and import to my pictures, BUT every time I do this it wants to import ALL photos and videos.
And when you do this, it should ask if you want to import the pictures that have already been imported. Select No.
Then, after you import, the photos should be deleted from the Camera Roll.
After the photos are imported and deleted from the Camera Roll, you can import using iTunes, only the photos you want on the iPhone.

Hello to all: My iMac has developed a video display problem. It displays everything in cartoon like colors - purple, green, blue. Can this be repaired? Is there a way to output to a different monitor? Thanks in advance! isplays

Hello -
My iMac has developed a video display problem. Everything now appears in a strange, cartoonish way. Purples, greens, blues. Can this be fixed, and if so, any idea how much it might cost? Also, could I output to a seperate monitor? I plan to replace the unit , but cannot right now. Thanks!

Go to System Preferences > Universal Access > Seeing.
In the Display area, reset it to "Black on white" by clicking that checkbox.
You can also reset it by pressing Command-Option-Control-8

Trying to backup despite Volume problems

I appear to have some volume problems with my internal HDD.
When I try to diagnose and fix it with Disk Utility the error is:
"Incorrect number of thread records" & "Invalid volume directory count"
Though the volume needs repairing, disk utility can't do it (nor can TechTool Pro http://www.micromat.com/index.php?option=com_simpleboard&Itemid=42&func=view&id= 525&catid=6)
Since I can't fix it I think I understand that it would be best to back things up, reformat the drive.
My question is esssentially academic. Would backing things up copy the volume problem I'm experiencing? or would it even allow me to copy things correctly? And how does one know what file was damaged or corrupted?

Good questions. Repairing the HD problem is something Disk Warrior could possibly correct. It's the best app. for resolving directory problems.
Did Disk Utility specifically tell you that it couldn't fix the drive, or did it simply report the error. If it's the latter, I would rerun Disk Utility as many times as necessary to get a clean run (no problems). This may not be possible given what was reported in your Micromat referenced link, however, it's worth a try.
Given the current state of the directory, you would not be able to create a clean clone backup of the drive. I suspect you would see an error during the copying. You could though drag/drop specific folders/files to the drive to the extent your HD cooperates. IMO, a "must" for any maintenance strategy.
Do you have a current cloned backup of your system. If you do, you could always copy it over the existing drive. If it is "somewhat current", you could drag/drop important data files on your computer's HD to either external media or another parition on the external, then recopy the clone to the HD. Afterward, move the data files back to their original locations.

Headset & Video Volume Problem

Similar Messages

Maybe you are looking for