Headset with boom and user voice monitoring?

Has anyone come across a headset for the 3G that has a boom mic AND allows the user to hear his/her voice in the headset as they speak? Regular wired phones do this, but I haven't found a cell phone headset yet to do the same thing.

There are several that have booms (of sorts) such as http://www.plantronics.com/northamerica/enUS/products/mobile/bluetooth-headsets/discovery-925-black and also http://www.engadget.com/2008/01/03/joby-introduces-zivio-bluetooth-headset-with- boom-mic/
But voice monitoring is not something generally done with bluetooth headsets. These are low power devices and may not have the power for that, and there is also a feed back loop being created due to the small size of these things.

Similar Messages

Impossible to set up a TC with admin and users privileges

Hi,
Sorry for my english first. I'm not an english speaker...
That's one week I'm playing with my Tc to try to set it up with admin and users privileges and and doesn't succeed to find a good way to do it....
What I want to do: set up my Tc so that I'm an admin and can do whatever I want in the folders of each user. I want the user to have access to one folder with their name. Let's say I would like to user my TC like a usual network drive or NAS.
What I discover: if I enable file sharing with accounts on my TC and define two users user1 and user2 with Read write privileges, user1 can see a folder user1 and put whatever he wants in it and there's a share folder for user1 and user2. BUT I cannot be admin on the TC when account filesharing is on. It means I cannot put anything in user1 folder beacuse I don't see user1 folder. It is just like if you have user accounts on TC you can just change the privileges but not defined an administrator. I'm able to see user1 folder for instance solely changing the filesharing back to secure shared disks "with time capsule password". If i do so I can see all the folders on the TC.
But it's very annoying because it means that each time I want to put a file inside the folder of one of my user, I have to restart my TC "with time capsule password", put the file, set it up back to user account and restart again the TC.... Not really practical!
Anyone got an idea how to use the Tc with user accounts (one admin and others users...)

I forgot to mention that I tried also another method: giving guest access to TC to my two users but there are several problems here: first they can only read (if not they would have the same privileges as me) what means they can put any document in the TC. Second, they see all the folders on the TC and the idea is that they can only see the shared one....

Need headset with volume and mic keys

In Nokia, there is no headset in budget..
The only budget with stylish headset I feel is coloud wh - 510 only.. I like to buy.. But I need volume key also.. Because always a music lovers have earphone everywhere and here music any times and different situation.. We maximum kept mobile in pocket while travel etc etc.. Each time for adjusting volume or play pause ,, we feel tough to take out and change.. If u make a headset with volume and multi function key means then it will be a super budget and very successful headset in India.

arvi2512 wrote:
In Nokia, there is no headset in budget..
The only budget with stylish headset I feel is coloud wh - 510 only.. I like to buy.. But I need volume key also.. Because always a music lovers have earphone everywhere and here music any times and different situation.. We maximum kept mobile in pocket while travel etc etc.. Each time for adjusting volume or play pause ,, we feel tough to take out and change.. If u make a headset with volume and multi function key means then it will be a super budget and very successful headset in India.
Please take a look at the Nokia WH-920 Purity Headset - http://www.nokia.com/global/products/accessory/wh-920
Availability is limited and may vary per region.
Good luck

Flex apps and users activity monitoring

Hi
My question is simple : is there a way to monitor users
activity inside a Flex app ?
Best regards

In that case you have to set up appropriate state variable
representing the things you want to track, then pass them to your
db using any of the available communication services available.
Personally I'M using CF with RemoteObjects and writing the
necessary CFC functions to handle the data updates. I also use the
SharedObject to capture state in case the user happens to hit
'refresh' or 'back' in their browser.

Any Issues with X250 and Using 3 Monitors?

With input from this forum, I went ahead and ordered an X250. ETA first week of April. Thank you... (ask me in May if I am still as grateful )
My plan is to also purchase an Ultra dock and use the screen on the notebook as well as two external displays. I did some research and understand certain video ports take priority over others, but this should no be an issue.
After reading another thread (here) I am concerned this setup may not be as reliable as one would hope. I realize the thread references an X240 (not an X250), but would like to know if others have a 3 display setup with the X250 and if they enountered any issues?
Thanks again. This group has provided a wealth of information that has essentially kept me in the Lenovo camp. I currently use a W520 and was pretty close to moving another manufacturer altogether.
Solved!
Go to Solution.

Hi Technobob,
I'm using a ThinkPad X240 daily on a ThankPad Ultra Dock with two 1920x1080 DisplayPort monitors simultaneously with the X240 LCD. Also have an X250 which occasionally gets plugged in to the same dock and all three monitors work, no issues.
Hope this helps!
I don't work for Lenovo. I'm a crazy volunteer!

Win 7 client with machine and user auth stuck in 802.1x_REQD

Hi everybody
we have a WLC 5508 with 7.2.110.0 and an ACS 5.3 and do the following:
- Win 7 client gets a GPO object with the wlan configuration for "Machine and User authentication" with PEAP
- On ACS 5.3 I configured correctly the authentication and authorization for first machine authentication and then user authentication ("Was machine authenticated = true)
- First when machine authentication happens, the client is configured into a quarantine VLAN, where it is only allowed to communicate with the domain controllers
- When the user authenication happens, the client is moved into the productive client vlan with no restrictions.
Everything works fine, except that after the user loggs in, it takes about 3 minutes until the client answers the EAP Identity Request and loggs in, see attached screenshot or the screenshot below:
In the client status on WLC i can see that the client is stuck in the 802.1x_REQD state for these 3 minutes, until suddenly it authenticates (but then very often, about 5 times - see screenshot).
We tried the following to find the problem spot. but we were not able to locate the problem:
- Configure the machine and user authentication into the same vlan all the time
- ONLY user authentication on the client
- Played with the Win 7 settings (timers, and so on)
- When we manually configured the WLAN profile on the Win 7 client and saved it, the Win 7 client connected to the SSID without any problems and without any delay (about 5 seconds after the save)
Did someone ever had the same issue?
Thanks a lot and best regards
Dominic

Hi Amjad
very good point on this, thanks a lot. In this case, I did not even think about the client firmware side, thought that I should be the WLC or the client settings, but not the driver. We will give a shot on this next week, maybe this will help us to solve the problem.
It is normal to have the clietn in 802.1x_REQD if it is not yet authenticated and that is the expected state to be at in your situation untlil the client fully authenticates.
Absolutely correct that the client is associated and in the 802.1x_REQD state as long as the authenticator did not get the EAP identity Response, but that the client takes such a long time to answer is not normal ;-)
- What is the supplicant that is used on the windows machines? default WLAN supplicant? or you use some commercial supplicants?
WZC.
- what is the result when testing with user auth only?
The same, it takes such a long time.
- what ist he result when testing with machine auth only?
Machine authentication works as expected, fast and as soon as the client is booted, the client gets authenticated.
Regards and have a nice weekend
Dominic

SALRT_CREATE_API with CBMA and/or Central Monitoring using Solman

Hi,
Does anyone know if function SALRT_CREATE_API can be used to raise alerts in Component Based Message Alerting (CBMA) and/or Centralised Monitoring in Solman? I understand SALRT_CREATE_API worked with the classic Alert Framework.
Che

Hi Michal,
Thank you for jumping in on this thread. Great timing with your blog
However the following thread suggests we can still use SALRT_CREATE_API:
XI Alerting and Central Monitoring : some alerts remain on PI
"Try removing the "CentralMonitoringServer-XIAlerts" RFC connection from both systems (proxy and PI). Then, ensure all com.sap.aii.rwb.server.centralmonitoring.* parameters are configured correctly on PI (restart system to apply changes on exchange profile) and try executing the scenarios again.
Check the target CCMS system the RSALERTDISP report and see if the alerts are being received there."
Perhaps the above only applies in the case of a dual stack? I am not quite ready to try some examples but when I do then perhaps options will become clearer to me. I will try to remember to update this thread with what I find.
Thanks
Che

Importing from BO XI R2 to 3.1 problems with Favorites and User Memberships

I am having a problem when using the Import Wizard to import users and groups. I marked it to import favorite folders for selected users and all groups and users. Well, the user favorites folder keeps failing with "The owner of this Favorite Folder was not found" and the groups are not associating the users in the new system under the same alias with the groups.
Old system I am using AD NTLM. New system I am using AD Kerberos.

Tim,
Thanks for the info. However, I think I need to be clearer.
The AD plugin has been configured on the destination system with no groups mapped. It has AD enabled and updated so the initial batch of users were imported in without any further manipulation.
When migrating the users and groups from the source system, all of the groups seem to have migrated over fine. However, all of the users from the source that has AD did not migrate over to the destination system because it says there is a duplicate. That is why the groups did not map these users and the favorites did not go through.. please let me know if this is not clear.
I do not want to change all of the system users to Enterprise and then transfer them over as enterprise and then configure them as AD users... this may end up causing more problems and may not even work

Problem with T61 and DVI External Monitor (via Advanced Mini-Dock)

Ever since I upgraded to Vista SP1 on my ThinkPad T61 (with an Intel integrated 965 series graphics card), I've been having problems when I try to use an external monitor via the DVI port in my Advanced Mini-dock. I'm curious if other people have experienced this problem.
The problems surfaces when I first boot up, or sometimes after my ThinkPad has been running for awhile (particularly when I do something graphics related, such as right-clicking to open display properties). The picture starts to flicker (or disappear and reappear, like the screen does when changing graphics resolutions). I also hear the "ba-bum" sound that you hear when disconnecting a piece of hardware, followed by the "bum-ba" reconnection sound - these two sounds happen repeatedly (sometimes as fast as once per second). If I don't do anything, sometimes I'll get a bluescreen.
Not long ago, I found a fix of sorts: to stop the flickering/reconnecting, I just open Task Manager and stop the process called "igfxpers" (an Intel driver problem). The problem always disappears after I do this, although I have to remember to do it every time I reboot or else the problem comes back. So it's not an ideal fix.
This problem doesn't happen when I connect an external monitor using the analog VGA port, or when I'm just using the notebook LCD. It's limited to just the DVI connection. I've tried two different digital monitors (one LG, the other BenQ) as well as two DVI cables - the problem is still the same. So it seems like a driver problem of some sort - unfortunately, the Intel drivers haven't been updated since last February.
I should also note that I've tried reinstalling my OS two or three times, and the problem always comes back. Has anyone else had this problem, and is a fix on the way?

Error Message:
Input signal out of range. Translation:
You will see this on an otherwise blank screen. Assuming that the data cable is plugged in correctly, the video card is feeding the monitor a signal stream in excess of what the monitor can accommodate. The two main causes for this are that the user has set either the resolution or the vertical frequency rate too high. For example, you might set a new graphics card to display at 1,280 x 1,024, but if the monitor is only capable of 1,024 x 768 resolution, you’ll get a Sync Out of Range error. This is especially common in 14-inch monitors.
Solution:
Because you obviously can’t make settings changes from within regular Windows, you’ll need to reboot into Windows Safe Mode. When you restart the system, there is a point during boot up when the system switches from reporting diagnostics and detected components to loading Windows. This point is usually accompanied by a beep and the screen going black. Just before this point, you want to start repeatedly pressing the F8 key. This should bring up a menu of Windows boot options. The one you want to pick is Safe Mode.
From Safe Mode right-click the Desktop and select Properties. Go to the Settings tab and use the slider to drop your resolution a notch or two. Reboot and let Windows try to go into Normal mode. If this still doesn’t work, go back into Safe Mode and get to the Settings tab of Display Properties. Click the Advanced button, go to the Monitor tab, and check your refresh rate. The lowest advisable rate is usually 60Hz, although this works better for LCDs (liquid-crystal displays) than CRTs (cathode ray tubes). Apply the change and reboot.

Any good headsets with calling and media buttons?

Hey everyone,
My Sony Xperia Z3 didn't come with a corded or cordless headset. I am currently using my older Samsung Galaxy S3 corded headset and for the most part it works great, except the buttons don't work as expected , go figure.
So, I was curious, has anyone tried the following:
http://www.amazon.com/Sony-Waterproof-Headphones-Resistant-Earphones/dp/B00KLTW0ZS/ref=sr_1_9?s=wire...
The above seems to match in style and color scheme. If these work, that'd be my recommended choice.
Or perhaps these:
http://www.sonymobile.com/us/products/accessories/stereo-headset-mh410/#white
I would go with a bluetooth stereo headset, but I can't seem to make myself spend $90+ for a headset.
Thanks y'all,
Johnathan

I never tried those, but I currently use this wireless smart one and I really like it so I'd recommend it:
http://www.sonymobile.com/global-en/products/accessories/smart-bluetooth-handset-sbh52/
A proud Sony User since 2002
If I was helpful to you, thank me by Kudos

[SOLVED] Problem with .htaccess and user dirs.

Hi!..
I write here because i have a problem with .htaccess files and url rewrites.
I deployed a Cakephp[1] app in my /home/~asmerkin/public_html/books directory. This folder contains a .htaccess file with the following directives:
<IfModule mod_rewrite.c>
RewriteEngine on
RewriteRule ^$ app/webroot/ [L]
RewriteRule (.*) app/webroot/$1 [L]
</IfModule>
My server works well in user directories but it fails to rewrite urls. When i go to http://localhost/~asmerkin/books/ apache returns 404 error. If i go to apache log i find this:
[Sat Sep 04 02:02:02 2010] [error] [client 127.0.0.1] File does not exist: /srv/http/home
So the .htaccess is working but the url it rewrites is not correct. My httpd.conf file is this file[2] and my httpd-userdir.conf is this one[3].
So i'd like to know if somebody can help me with this issue. I tried everything without results.
Thank you!
[1]: Cakephp.org
[2]: http://perkin.pastebin.com/g0dbbW2P
[3]: http://perkin.pastebin.com/fprNYCRY
Last edited by Perkin (2010-09-06 11:24:55)

Finally i had to edit my .htaccess file adding a RewriteBase rule to it.

Problem with role and user; user can't see the table

Hello forum,
I've created a role:
CREATE ROLE enr_service;
GRANT CONNECT TO enr_service;
GRANT ALL ON Locataires TO enr_service;
GRANT ALL ON Batiments TO enr_service;
GRANT ALL ON Sportifs TO enr_service;
GRANT SELECT ON Epreuves TO enr_service;
and also a user:
CREATE USER ENR1 IDENTIFIED BY password QUOTA UNLIMITED ON USERS;
GRANT enr_service TO ENR1;
ALTER USER ENR1 DEFAULT ROLE enr_service;
ALTER USER ENR1 DEFAULT TABLESPACE USERS;
I can connect to the database with this user but when I try to query a table he's been granted access to I get an error message:
SELECT * FROM Sportifs;
ORA-00942: table or view does not exists
I can't see what I've done wrong. Any help is appreciated.
Sebastian

user2019788 wrote:
Hello forum,
I've created a role:
CREATE ROLE enr_service;
GRANT CONNECT TO enr_service;
GRANT ALL ON Locataires TO enr_service;
GRANT ALL ON Batiments TO enr_service;
GRANT ALL ON Sportifs TO enr_service;
GRANT SELECT ON Epreuves TO enr_service;
and also a user:
CREATE USER ENR1 IDENTIFIED BY password QUOTA UNLIMITED ON USERS;
GRANT enr_service TO ENR1;
ALTER USER ENR1 DEFAULT ROLE enr_service;
ALTER USER ENR1 DEFAULT TABLESPACE USERS;
I can connect to the database with this user but when I try to query a table he's been granted access to I get an error message:
SELECT * FROM Sportifs;
ORA-00942: table or view does not exists
I can't see what I've done wrong. Any help is appreciated.
SebastianThat's probably because ENR1 doesn't have any table named SPORTIFS and he didn't qualify the table name with the schema name ...

Issues using macbook with bootcamp and external apple monitor

I am having issues using an apple external monitor connected to my macbook with bootcamp - in particular, if i connect the monitor to the computer when the computer is already on, it won't work. Also, when i disconnect the monitor fromt he computer, the computer screen will go black and I'll have to re-start
Anybody experienced the same and can help?
Thx

just make sure that while its standing on its side there aren't any plugs or cables on that side. I'm not familiar with the mb port setup, but having power, two usb, and a display cable could prose a problem for sideward standing if they are on separate sides of the machine.
as the first commenter mentioned the orientation of your computer is irrelevant, but you wouldn't want to have the weight of the laptop sitting ontop of a usb or video plug that's coming out the side.

Trouble with DeployManager and user administrator

i have the following error during the task of deployment of a WD app. The user administrator isn't blocked coz' i unblocked recently. but it continue show me that error. Any idea to solve my problem. Thanx in advance
this is the log:
Settings
SDM host : veccs1011
SDM port : 50218
URL to deploy : file:/C:/DOCUME1/Mariana/LOCALS1/Temp/temp34919MyWDproject.ear
Result
=> deployment aborted : file:/C:/DOCUME1/Mariana/LOCALS1/Temp/temp34919MyWDproject.ear
Aborted: development component 'MyWDproject'/'local'/'LOKAL'/'0.2006.05.09.15.43.06':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [veccs1011] with user name: [Administrator] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Access Denied.]
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment exception : The deployment of at least one item aborted

Hi
WHy dont you try changing the sdm password . have a llok at this forum thread for changing the sdm password
SDM password not working
Hope this helps , please mark points for helpful answers.
regards
rajeshkr

Radius 802.1x authentication with computer AND users.

Hi !
I don't know if what I trying to do is possible so please excuse me if this sounds silly :)
I have a Cisco Wireless lan manager where I've configure 2 differents SSID's : COMPANY and COMPANY_mobiles.
What I want is to create a policy to restrict the access to the COMPANY SSID to only my company laptops with authenticaded users (both groups exists in the AD).
Therefore I created a new policy with the following conditons :
- NAS Port Type : Wireless
- Client IPv4 Address : <my cisco ip>
- Called Station ID : ^AA:BB:CC:DD:EE:FF:COMPANY$
- Users Groups : EUROPE\MY_USER_GROUP
- Machine Groups : EUROPE\Domain Computers
When trying to connect a notebook on windows 7 to that COMPANY ssid, I'm beeing rejected with the following error :
User:
    Security ID:            EUROPE\HOSTNAME$
    Account Name:            host/HOSTNAME.my.server.com
    Account Domain:            EUROPE
    Fully Qualified Account Name:    EUROPE\HOSTNAME$
Authentication Details:
    Connection Request Policy Name:    Secure Wireless Connections
    Network Policy Name:        Connections to other access servers
    Authentication Provider:        Windows
    Authentication Server:       My.radius.server.com
    Authentication Type:        EAP
    EAP Type:            -
    Account Session Identifier:        -
    Logging Results:            Accounting information was written to the local log file.
    Reason Code:            65
    Reason:                The Network Access Permission setting in the dial-in properties of the user account in Active Directory is set to Deny access to the user. To change the Network
Access Permission setting to either Allow access or Control access through NPS Network Policy, obtain the properties of the user account in Active Directory Users and Computers, click the Dial-in tab, and change Network Access Permission.
It therefore seems that it doesn't match my network policy and falls bacj to the default one.
If I remove the user rule, and let the computer rule : Connection OK
If I remove the computer rule, and let the user rule : Connection OK
but if I put both, i can't connect :s
Can someone help me with this issue ?
Thanks a lot !
Geoffrey

Hi Geoffrey,
I would like to know if
EAP-TLS wireless authentication has been used since it uses user and computer certificates to authenticate wireless access clients.
Please try to use NPS wizard to configure 802.1x wireless connection,
and
you will find that it
creates new connection request policy and network policy. Network policy NAS Port type will be "Wireless -Other OR Wireless -IEEE 802.11".If
you
need filter by user and computer account, the log should show both authenticate user and machine account name.
EAP-TLS-based Authenticated Wireless Access Design
http://technet.microsoft.com/en-us/library/dd348478(WS.10).aspx
Regards, Rick Tan

Headset with boom and user voice monitoring?

Similar Messages

Maybe you are looking for