Healing brush/Clone stamp tool and others very slow processing

Healing brush/Clone stamp tool and others very slow processing. System resources monitor shows only 700MB (of 5GB allocated to Photoshop) RAM and 30% CPU is used to perform such tasks as healing brush. Process bar comes up and is painfully slow to complete the task. I don’t understand why does Photoshop not use all the resources available/allocated? No other programs are running at the time, I have tried all the suggestions on this forum and all over the Google. My brand new system is: Intel I7 4770K overclocked to 4.3GHz, 8GB 1600 RAM, Samsung PRO 120GB SSD system drive, 100GB scratch disk. The photos I usually work on don’t exceed 20MB in size. Any suggestion would be appreciated.  Thanks

Thanks for the answer.
I have not mentioned the GPU because the processes I described (as far as I know) are not supposed to be using GPU resources. So far I have not been able to afford the GPU i want which is GTX770, so I use Intel 4600 built in graphics instead. To be honest I find, that 4600 graphics is quite powerful. I am able to play Mass Effect 3 on Full spec on max res without game slowing down. And Windows 7 64bit index score is 7.8 for the 4600 graphics. Overall index score is 7.8 on my PC righ now.
I'll try to get the Photoshop system info as soon as possible.
Thanks again.
Zee

Similar Messages

  • Clone Stamp Tool and Healing Brush not working - why?

    As pointed out in the thread subject line, both the clone stamp tool and healing brush are not working for me in Photo Elements 7.
    When I am attempting to use it, I get the message: "Could not use clone stamp tool because the area to clone has not been defined".   Well, this is not the case since I did define it with command Alt + left mouse click.
    Background:
    Photo Elements 7 is installed in Windows XP Professional SP3. The latter runs as a virtual O/S with Sun VirtualBox on host SuSE Linux 11.1 (Gnome).
    I have run out of ideas as to what the problem could be, so I am requesting assistance from the forum community. Thank you very kindly in advance for replies.

    Do you mean photoshop elements 7 and not premiere elements?
    The fix posted above only applies to linux os systems, which is
    different from mac and windows.
    On windows vista Alt+left click is to set the clone source.
    Try the following steps one at a time.
    1. reset the clone stamp tool by clicking triangle on the far left of the
       tool options bar and select reset tool.
    2. Go to Edit>Preset Manager and click Done in the dialog that appears.
    3. Reset the elements 7 preferences by holding down the Shift+Alt+Ctrl keys
        at the same time you start elements 7. In the dialog that appears, click yes.
    Hope this helps.
    MTSTUNER

  • Adobe photoshop elements 9 . i cannot get the circle to appear on clone stamp tool and spot healing

    adobe photoshop elements 9 , i cannot get the circle  to appear using clone stamp tool and the spot healing brush . i`ve tried restating my computer and unloading and loading the adobe disc . but still no good .

    I had this same problem and was searching for answers. I also prefer using a circle instead of crosshairs. I hope you've figured it out by now, but, if you haven't, here is the answer (I am using Elements 9, but, it should work for other versions I think):
    1. Open up Elements Editor, Click on Edit, Click on Preferences, Click on Display & Cursors.
    2. Under Painting Cursors, select Full Size Brush Tip
    3. (optional) - if you want crosshairs within your circle, then also select Show Crosshair in Brush Tip.
    4. Click ok.
    Now use the brush, and it should have a circle to use.
    P.S. Sometimes if you have your Caps Lock key on, that removes the circle as well.

  • Photos fail to print after editing with clone stamp tool and layers

    After editing using the clone stamp tool and using layers the photos fail to print.  I even tried a simple crop edit and the photo failed to print.
    Photos print without editing.

    Im working on a Mac OX 10.9.4 and Photoshop Elements 12 for Mac
    I tried printing from Organizer and editor and I have the image saved on my desktop
    I don't receive an error when I try to print. The message usually reads: Printing, 2% complete or 13% complete.
    I have left it sit overnight but it never produced a photo.
    The printer is new: HP Envy 5400 and I have no problem printing photos from I Photo.

  • When using the clone stamp tool and press the alt key layer just moves

    when using the clone stamp tool and press the alt key to set a point it seem to create a new layer and just moves the layer arround. I can not get the clone to now work. what did I do?

    Open the Clone Source panel. I think you'll find the Clipped option is disabled. If so, enable it.

  • Clone Stamp Tool and smudge tool issue

    iMac 21.5";   new on 12/14/2011;   OS Version 10.7.3;  2.7GHz Intel Core i5;  AMD Radeon HD 6770M 512 MB.
    Two and Three Layer, all layers are copies of background layer, plus two adjustment layers, 8 Bit file:
    Clone Stamping directly on image layer with Background layer directly below and with copy of Background layer directly below.
    Intuos 4 tablet and pen.
    Clone Stamp tool Setup:
    Layer Adjustment parameter set to either This Layer and Below or All Layers.
    All other parameters at default.
    Using simple soft brush.
    =====================================
    The bug: Clone Stamp too will only affect the layer selected to do the actual cloning.
    Tried it in every configuation possible without adjust the tool defaults, and no layers below will get the cloning corrections or stamping.

    Welcome back gang.
    Made a couple new discoveries while double checking.
    Again, the same four layer setup: Background-Background copy-HSB Adj layer-Levels Adj layer.
    The problem replicates with the Adj layers clipped or not.
    The key is any tweak in the Adj layers will cause the issue.
    Any Adj layer tweak seems to get exaggerated when smudging on a layer.
    For example, increasing the gamma or center slider in the Levels box will cause all bright pixels to go white and darker pixels to go black.
    I do not know the threshold luminance pixel value but I would guess it is at 128/128.
    Modest tweaks to the Adj layer, for example raising the gamma slider to 1.20 will cause the smudge to posterize or turn white.
    Tweaking the HSB Saturation slider to +12 will cause color posterization.
    Counter to what I had stated upstream, any setting of the Smudge tool will cause this to happen.
    Also, as said upstream, the performance goes down such that the spinning balls appear frequently.
    In other words, it does not appear to be a 1-to-1 relationship of tweaks made in the Adj layer to the effect of the Smudge tool.
    My guess is that the Sample All Layers option is multiplying the color and luminance values fo the layers together.
    Plus, it was probably designed to do so but I do not think it was to be so pronounced.
    Still amazes me that the situation never occurred or did I notice it until now, and the issue exists in CS5 too.
    When did PS add the Sample All Layers option to the Smudge tool?
    Anybody else?
    ================================
    Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
    Operating System: Mac OS 10.7.3
    System architecture: Intel CPU Family:6, Model:42, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
    Physical processor count: 4
    Processor speed: 2700 MHz
    Built-in memory: 4096 MB
    Free memory: 1738 MB
    Memory available to Photoshop: 3384 MB
    Memory used by Photoshop: 75 %
    Image tile size: 1024K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    OpenGL Version: 2.1 ATI-7.18.11
    OpenCL Version: 1.1 (Dec  4 2011 16:53:18)
    Video Card Vendor: ATI Technologies Inc.
    Video Card Renderer: ATI Radeon HD 6770M OpenGL Engine
    Display: 1
    Main Display
    Display Depth:= 32
    Display Bounds:=  top: 0, left: 0, bottom: 1080, right: 1920
    Video Renderer ID: 16915206
    Video Card Memory: 500 MB
    Video Rect Texture Size: 16384
    Serial number: Tryout Version
    Application folder: Macintosh HD:Applications:Adobe Photoshop CS6:
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      Macintosh HD, 930.7G, 700.7G free
    Required Plug-ins folder: Macintosh HD:Applications:Adobe Photoshop CS6:Adobe Photoshop CS6.app:Contents:Required:
    Primary Plug-ins folder: Macintosh HD:Applications:Adobe Photoshop CS6:Plug-ins:
    Additional Plug-ins folder: not set
    Installed components:
       adbeape.framework   adbeape   3.3.8.19346   66.1025012
       AdbeScriptUIFlex.framework   AdbeScriptUIFlex   6.2.29.18602   66.490082
       adobe_caps.framework   adobe_caps   5.0.11.0   1.256674
       AdobeACE.framework   AdobeACE   2.19.18.19243   66.492997
       AdobeAGM.framework   AdobeAGM   4.26.17.19243   66.492997
       AdobeAXE8SharedExpat.framework   AdobeAXE8SharedExpat   3.7.101.18636   66.26830
       AdobeAXEDOMCore.framework   AdobeAXEDOMCore   3.7.101.18636   66.26830
       AdobeBIB.framework   AdobeBIB   1.2.02.19243   66.492997
       AdobeBIBUtils.framework   AdobeBIBUtils   1.1.01   66.492997
       AdobeCoolType.framework   AdobeCoolType   5.10.31.19243   66.492997
       AdobeCrashReporter.framework   AdobeCrashReporter   6.0.20120201  
       AdobeExtendScript.framework   AdobeExtendScript   4.2.12.18602   66.490082
       AdobeJP2K.framework   AdobeJP2K   2.0.0.18562   66.236923
       AdobeLinguistic.framework      17206  
       AdobeMPS.framework   AdobeMPS   5.8.0.19463   66.495174
       AdobeOwl.framework   AdobeOwl   4.0.93   66.496052
       AdobePDFL.framework   AdobePDFL   10.0.1.18562   66.419471
       AdobePDFSettings.framework   AdobePDFSettings   1.4  
       AdobePIP.framework   AdobePIP   6.0.0.1642  
       AdobeScCore.framework   AdobeScCore   4.2.12.18602   66.490082
       AdobeUpdater.framework   AdobeUpdater   6.0.0.1452   "52.338651"
       AdobeXMP.framework   AdobeXMPCore   66.145661   66.145661
       AdobeXMPFiles.framework   AdobeXMPFiles   66.145661   66.145661
       AdobeXMPScript.framework   AdobeXMPScript   66.145661   66.145661
       ahclient.framework   ahclient   1.7.0.56  
       aif_core.framework   AdobeAIF   3.0.00   62.490293
       aif_ocl.framework   AdobeAIF   3.0.00   62.490293
       aif_ogl.framework   AdobeAIF   3.0.00   62.490293
       AlignmentLib.framework   xcode   1.0.0.1  
       amtlib.framework   amtlib   6.0.0.75  
       boost_date_time.framework   boost_date_time   6.0.0.0  
       boost_signals.framework   boost_signals   6.0.0.0  
       boost_system.framework   boost_system   6.0.0.0  
       boost_threads.framework   boost_threads   6.0.0.0  
       Cg.framework   NVIDIA Cg     
       CIT.framework   CIT   2.0.5.19287   145486
       data_flow.framework   AdobeAIF   3.0.00   62.490293
       dvaaudiodevice.framework   dvaaudiodevice   6.0.0.0  
       dvacore.framework   dvacore   6.0.0.0  
       dvamarshal.framework   dvamarshal   6.0.0.0  
       dvamediatypes.framework   dvamediatypes   6.0.0.0  
       dvaplayer.framework   dvaplayer   6.0.0.0  
       dvatransport.framework   dvatransport   6.0.0.0  
       dvaunittesting.framework   dvaunittesting   6.0.0.0  
       dynamiclink.framework   dynamiclink   6.0.0.0  
       FileInfo.framework   FileInfo   66.145433   66.145433
       filter_graph.framework   AdobeAIF   3.0.00   62.490293
       hydra_filters.framework   AdobeAIF   3.0.00   62.490293
       ICUConverter.framework   ICUConverter   3.61   "gtlib_3.0" "." "16615"
       ICUData.framework   ICUData   3.61   "gtlib_3.0" "." "16615"
       image_compiler.framework   AdobeAIF   3.0.00   62.490293
       image_flow.framework   AdobeAIF   3.0.00   62.490293
       image_runtime.framework   AdobeAIF   3.0.00   62.490293
       LogSession.framework   LogSession   2.1.2.1640  
       mediacoreif.framework   mediacoreif   6.0.0.0  
       PlugPlug.framework   PlugPlug   3.0.0.383  
       UpdaterNotifications.framework   UpdaterNotifications   6.0.0.24   "6.0.0.24"
       wrservices.framework        
    Required plug-ins:
    (removed)
    Optional and third party plug-ins:
       Perfect Effects Free 3.0.2, Copyright © 2012 onOne Software.  All rights reserved. - from the file “Perfect Effects Free.plugin”
       Perfect Effects Free Filter 3.0.2, Copyright © 2012 onOne Software.  All rights reserved. - from the file “Perfect Effects Free.plugin”
       Perfect Effects Free Smart Filter 3.0.2, Copyright © 2012 onOne Software.  All rights reserved. - from the file “Perfect Effects Free.plugin”
    Plug-ins that failed to load: NONE
    Flash:
       onOne
       Mini Bridge
       Kuler
    Installed TWAIN devices: NONE

  • In Photoshop 2014 how do you use the clone stamp tool and keep the image panel from moving

    I don't quite know how to use the clone stamp tool in the Photoshop 2014 version.  When I click on the clone stamp it creates a duplicate of the image and it moves around and I can not apply the clone stamp to the area I want to correct.  How do you lock it down to keep it from moving?

    Hi Smoothery4501,
    The Photoshop clone stamp tool allows you to copy one area of an image and copy it onto another area.
    Click on the clone stamp tool then press the alt key on the keyboard and click on the image to define a source point.
    Please refer to below blog for further info
    Clone Stamp Tool « Julieanne Kost's Blog
    Thanks

  • Clone stamp tool and keyframing

    How do I animate with the clone stamp tool? For example I have some footage and I want to use the clone stamp tool frame by frame. I know how to use the tool right now but whatever I paint out is staying on for every frame.

    From this page:
    Common paint tool settings in the Paint panel
    Duration
    The duration of the paint stroke. Constant applies the stroke from the current frame to the end of the duration of the layer. Single Frame applies the stroke to the current frame only. Custom applies the stroke to the specified number of frames, beginning with the current frame. Write On applies the stroke from the current frame to the end of the duration of the layer and animates the End property of the stroke to match the motion with which the stroke was drawn.
    I would suggest reading more on that page. Also, you'll probably find this page helpful as well.

  • Clone stamp tool and image processing

    Hello, I am not able for some reason to apply clone stamp tool to multiple pictures at a time using image processing, I just get the first picture saved with the effect and the rest as they were. Could someone help me out with this? I have around 200 pictures and I need to remove damage from all of them quickly. Or is it not possible? Thank you!

    After that time ten years Adobe added a new feature that enable you to record tools use. However the feature was not well designed recorded various amount of data depending on machine.  Has some restrictions also.  The feature is not compatible with everything as I wrote Adobe Disable this feature when its Plug-in Scriptlistener is installed.  I never found a good use for the feature. Note: my option is grayed out because I install Scriprlistener.

  • Healing brush/clone stamp cursor is dark.

    I hope I've overlooked something very simple.  In CS3 on my PC, the circular cursor for healing brush and clone stamp (probably others, too) is always a contrasting color to the underlying image so the circle is always very visible.  With the same preferences set, CS4 always has a very dark, perhaps black circular cursor, so that in dark areas, it completely disappears, making it difficult to select the correct area.
    Just me, my PC or CS4?
    Thanks!

    Thanks for the answer.
    I have not mentioned the GPU because the processes I described (as far as I know) are not supposed to be using GPU resources. So far I have not been able to afford the GPU i want which is GTX770, so I use Intel 4600 built in graphics instead. To be honest I find, that 4600 graphics is quite powerful. I am able to play Mass Effect 3 on Full spec on max res without game slowing down. And Windows 7 64bit index score is 7.8 for the 4600 graphics. Overall index score is 7.8 on my PC righ now.
    I'll try to get the Photoshop system info as soon as possible.
    Thanks again.
    Zee

  • CS5 64-bit Content Aware Fill kills Healing brush, clone stamp

    Here's the deal:
    1)  Open image for retouching-background layer only
    2)  Make copy of background layer 'cause I never retouch there and CAF won't work on the blank layer I use for all other retouching
    3)  Add blank layer above the previous two layers for clone stamp/healing work--can't use it for content-aware fill
    4)  Find something that will retouch better with CAF than cloning or healing and fix it with CAF on layer 2
    5)  The healing brush and clone stamp now do not work.  I can see them, and the clone stamp continues to preview in the brush correctly, but when clicked nothing happens.
    The only solution I've found is to save the image and restart CS5.
    CS5 64-bit, Win7 Pro 64 bit, Core2duo e8400, 8gigs RAM
    Consistent and reproducibly annoying...
    Steve

    Okay, I duplicated your setup exactly with CS5 64 bit on Win 7 x64.  Background layer, copy of background layer, and transparent touch-up layer.
    You are unclear about exactly how you're invoking the Content Aware Fill.
    I went through exactly the steps you suggested, as evidenced by the following Photoshop Edit log excerpt.  I saw NO difficulties using the Clone tool in the last step.
    Are you aware you can use the SPOT Healing Brush, in Content Aware mode, to do what you're doing on the transparent top layer (thereby avoiding the need to work on the background copy layer)?  It is able to deal with the image being on the lower layers.
    Photoshop Edit Log:
    2010-06-17 10:58:24 File Blake_and_Mom.psd opened
      Open
       C:\MMEDIA\Retouched Photos\Blake_and_Mom.psd
    Duplicate Layer
      Duplicate current layer
       5
    New Layer
      Make layer
      Select clone stamp
      Set Source Sampling Point of current application
       To: Document Location
       Source: layer “Layer 1”
       Location: 1420 pixels, 743 pixels
    Clone Stamp
    Clone Stamp
    Clone Stamp
      Select layer “Background copy”
       Without Make Visible
      Select spot healing brush
    Spot Healing Brush
      Select layer “Layer 1”
       Without Make Visible
      Select clone stamp
      Set Source Sampling Point of current application
       To: Document Location
       Source: layer “Layer 1”
       Location: 1299 pixels, 879 pixels
    Clone Stamp

  • Healing Brush = Clone Stamp when used on separate layer?

    I can't find corroboration on the web so I want to konw if anyone here has seen this - when using the Healing Brush tool in Normal mode, the opacity of the cloned pixels when painted onto the same layer as the source pixels will usually be decreased to blend better, BUT if the cloned pixels are painted onto a separate layer (to work non-destructively) the tool will NOT decrease opacity and the Healing Brush will work more like (if not exactly like) the Clone Stamp - true??

    Hmm, It seems to be working differently for me now. Probably me being tired . I guess I'm just learning how it works. Here are some tests I just did. The top left is a cloned section using the Healing Brush with the "Current Layer" setting - looks identical to the original (even when not sitting on top of the original bg layer), and also looks just like the Clone Stamp (using either setting). The  bottom left is a cloned section using the Healing Brush with the "All Layers" setting – NOTICE THE BLENDED OPACITY (as one would expect it to work).
    I guess this is the normal difference of the two different Healing Brush settings...?
    I'm working in both CS5.1 and  CC (trial version). Thanks.

  • MM standard reports MB51 and MB52 very slow processing

    We are using standard reports of MM MB51 and MB52, they are taking too much time to execute and display the results. can any please let us know what precautionary measures we can take to make these reports to execute fast.
    Thanks in advance.

    Yes Agreed ,this might be SAP note issue , please find latest sap note ,you can refer above said repots also
    921164 -     MB51: Improving the runtime using database hints
    902675-     MB51: Database hints to improve runtime / 4.70
    1283280-     MB51: Enhancements to multiple account assignment display
    1233616-     MB51: Bad performance by selection material numbers
    555893-     MB51: Preventing runtime error DBIF_RSQL_INVALID_RSQL
    1159120-     MB51: Selection of material numbers not quite correctly
    531604-     MB52: Performance improvement
    540257-     MB52: Performance improvement (only for Release 4.5B)
    129599-     MB52: Performance, incorrect display
    Regards,
    Sandesh Sawant

  • Clone stamp tool - can't turn 'aligned sample' option off

    HI, I am experiencing a problem with the clone stamp tool and healing brush tool where I uncheck the 'aligned sample' optiom, 'alt' click where I want the sampling to come from, then brush over the area I want to be affected.  I have noticed that the results are the same as when the 'algned sample' option is on; the sampling is clearly following the brush just as when 'aligned sample' is checked.  I have reset the tool with no effect.  Anyone have a solution?
    Thanks

    Just to clarify, the Aligned option will cause multiple brush strokes to copy from the sampled area as though you had duplicated the sampled layer, hidden it with a mask, and now revealing it. With Aligned off, each brush stroke returns to the sampled area. For example, if you have cloned from a layer with the image of a face, sampling in one of the eyes, multiple brush strokes with Aligned on will result in the face filling in stroke by stroke. With Aligned off, a new eye will be cloned with each brush stroke. And by brush stroke I mean clicking and releasing mouse button.
    If this is the behavior you are expecting by not getting and resetting the tool did not fix things, then it is time to reset the application preferences:
    http://tv.adobe.com/watch/the-complete-picture-with-julieanne-kost/how-to-reset-photoshop- cs6s-preferences-file/

  • CS5 Healing brush & Clone tool Strange Problems

    When I option click a sample point to heal or clone, then release the mouse or pen, the sampled area remains in the brush diameter even though I haven't healed or cloned anything yet.  Just moving the mouse or pen around includes the image of the sampled area all over the image.  What gives?
    Wasn't always like this, just last few days.  For example if I select and area with lips on a face, then move the brush to the cheek, the image of the lips remains in the brush area.  Very frustrating.  Any help would be much appreciated.  This is with both the healing brush and clone stamp tools.
    Mac OS 10.6.3, MacPro 2 X 3 GHz Quad-Core Intel 16GB ram NVIDIA GE-Force 8800 GT graphics card running CS5 in 32 bit mode.

    That is a preference that was added in Photoshop CS4 to preview the cloned area (makes it easier to align).
    Go to the Clone Source palette, and turn off "Show Overlay" if you don't want to see the preview.
    You might want to take some time to read up on the Clone Source palette, and the options it offers -- it can really speed up a lot of common cloning tasks.

Maybe you are looking for