Health App not showing correct steps

Hi,
I have two health apps installed on my 5S, Argus and Myfitnesspal. Both of them and the Health app have been counting steps successfully and all agreed with each other.
For the last week the Health app has been showing far less steps (and Walking + Running Distance) than the other two and less than I have really walked. For instance today I have walked 2.9 km to work, walked at lunchtime and on my home yet the Health app is showing only 1,760 steps (1.27km) while the other apps are showing over 10,400 steps, which I believe to be accurate.
As far as I'm aware I haven't changed any settings, has anyone any suggestions please?
John

I take it you have already gone into the Health app and set up your Medical ID card, correct?
The Medical ID card will show up on the Lock Screen password entry screen when Emergency option on the bottom left-hand side of the screen is clicked.
It does not show up anywhere if you do not have a passcode lock on the screen.
Cheers,
GB

Similar Messages

Health app not showing steps and calories

It's about 5 days that the health app is not showing steps, calories and other data which was showing before. I have added two data source to provide data for health App and both them are provideding data.

I take it you have already gone into the Health app and set up your Medical ID card, correct?
The Medical ID card will show up on the Lock Screen password entry screen when Emergency option on the bottom left-hand side of the screen is clicked.
It does not show up anywhere if you do not have a passcode lock on the screen.
Cheers,
GB

HT203037 Health app not retaining Add Steps data

I'm looking forward to using the Apple Watch to track my activity when I get it. In the meantime, I've been manually entering my step activity in the Health app manually. Unfortunately, more often than not, even if it seems to initially accept the Add Data entry, after a few hours it usually stops including the manual entry in the total displayed for the day, even though pouring back through the data shows the manual entry is still there.
I've tried deleting the manual entry and re-entering it with a different time to see if that matters, but it generally doesn't help. It's unreliable enough for me to forego manually adding data entries for my elliptical step data, for now. Unless someone can explain/sleuth out the logic necessary for the data to be accepted as legitimate and incorporated into the daily step total.
Any ideas?

Thanks for the feedback. I'll give the decimal thingy a try, although I'm not sure why that might work (a fraction of a step???). I'm just trying to find out if others are experiencing this weird issue with the Steps data set. The manual entries continue to remain in the data set after entry, they just stop being incorporated into the displayed totals/graph.
I also note that it takes a full minute, or so, for all the data in the set to be displayed when you want to edit it. I discovered this when I saw that my manual entry wasn't being included in the totals graph and wanted to check if my entry was still there. It was. So, I then deleted it and re-entered the amount with a different entry time. That sometime worked and sometime not. I just didn't want to leave the old non-included entry in the data set, once I got a new entry that worked.
It's nice to know the issue isn't only affecting me. Maybe Apple will now take a look and see what's the matter.

Health app not showing the curve on graph

hello , my health app stopped the curve progression suddenly i tried to reset my phone and force the app to stop but still the same knowing the the day view show that the data is regIstered.... Any help please...

I take it you have already gone into the Health app and set up your Medical ID card, correct?
The Medical ID card will show up on the Lock Screen password entry screen when Emergency option on the bottom left-hand side of the screen is clicked.
It does not show up anywhere if you do not have a passcode lock on the screen.
Cheers,
GB

Health app not showing heart rate data?

The built-in Health app is not showing data from my heart rate monitor (HRM).
I'm using a bluetooth 4.0 HRM (Wahoo Blue HR) on my iPhone 5S (iOS 8.3) The HRM shows as "Connected" in my Bluetooth settings and shows my heart rate within the Digifit and Wahoo Utility apps, so I know the HRM is working correctly. I've enabled Heart Rate Read/Write data for the Digifit and Nike+ Running apps within the Health app.
The heart rate data never shows up in the Health app's Dashboard (or anywhere else in the Health app). Since it doesn't show up in the Dashboard, the data doesn't flow over to the Nike+ Running app, so my heart rate is blank there too. The Digifit app is set to write the heart rate data in the Health app, but that is not happening.
How can I get the Health app to receive my HRM data?

I take it you have already gone into the Health app and set up your Medical ID card, correct?
The Medical ID card will show up on the Lock Screen password entry screen when Emergency option on the bottom left-hand side of the screen is clicked.
It does not show up anywhere if you do not have a passcode lock on the screen.
Cheers,
GB

Why do the categories in the health app not show up in the dashboard when it is told too.

Lately every time I attempt to put an item from HealthKit on My dashboard it will not show up. I go back to the selection list and click on it again and it is unmarked. It won't even allow Me to add a data point. Is anyone else having this or similar issues

Hi dcbollinger3450,
It sounds like you are trying to add your Medical ID card to your lock screen. You can find the information about how to achieve this in the following article:
Use Health on your iPhone or iPod touch with iOS 8
http://support.apple.com/kb/HT6357
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

Exercise Details added via Windows 8.1 App not showing correctly in the HealthVault

Hi,
I Add my Exercise details in the Windows 8.1 HealthVault App, but when I display the exercise details in the HealthVault most of the details are missing, but If I select the activity the details are displayed:
However If I select an activity I see the detail the Distance Duration and calories burned is displayed

Ah. The Windows 8.1 app you're using is the Bing Health & Fitness app, not the HealthVault for Windows app. That clears things up.
Unfortunately the unsatisfying answer I have for you is that there is a known issue that Bing's app stores exercises in a way that HealthVault can't properly display. The Bing app team is aware of the bug and working on a fix.
I wish I had a better answer for you.
-Kathy-
Hi Kathy,
After a bit of digging, I found your reply here and wanted to check if you had a more recent update about it. I'm having a similar issue with Bing Health & Fitness and the HealthVault integration (see my comments on this thread: http://answers.microsoft.com/en-us/bing/forum/bing_apps-bing_appfeat/bing-health-and-fitness-windows-phone-app-and-tcx/c8cde5cd-676c-460b-b4de-453a3cdd681c)
Do you know if Bing team has fixed the way they store data in HealthVault so that I can actually export my workouts as GPX files?
Apologies if this is a cross-post, please reply on whichever thread you think is appropriate.
-AshWinOne

CC desktop app not showing correct install status for Photoshop

I have Photoshop CC, Bridge CC and Lightroom installed but the desktop app shows Photoshop is not installed.
Photoshop runs without problems via a shortcut on the desktop.
The Home tab shows Photoshop CC was installed.
The Apps tab doesn't show it - but implies that I can install it ...
If I click on install, then I get an error ... probably because it is already installed.

log out of your cc app and then log back in.

Apps not showing correct version

hello masters,
i would like to know how to check exact version of oracle applications R12. i have applied patch delta6 and RUP6 but don't know it is applied or not......how can i check that patch is applied successfully???
when i query
SQL> select product_version,patch_level
2 from fnd_product_installations
3 where patch_level like '%AD%';
PRODUCT_VERSION PATCH_LEVEL
12.0.0 R12.AD.A.6it shows me same version as it was showing before applying RUP 6,as i applied DELTA 6 (which prerequisite for applying RUP 6) so how can i confirm that RUP 6 has been applied successfully????
any suggestion will be highly appreciated
thanks and regards
VD
Edited by: vikrant dixit on May 18, 2009 12:22 AM

Hi,
i would like to know how to check exact version of oracle applications R12.Use this query:
SQL> select release_name
from fnd_product_groups;
i have applied patch delta6 and RUP6 but don't know it is applied or not......how can i check that patch is applied successfully???Query AD_BUGS table to find out whether you have the patch applied or not.
To know the patchset level for each module, please refer to:
Note: 139684.1 - Oracle Applications Current Patchset Comparison Utility - patchsets.sh
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=139684.1
Regards,
Hussein

Apps not showing correct icon.

I am having a problem with some apps that I download. When I download them to my iphone, I am getting the wrong icon for the app I downloaded. Does anyone know a fix for this? I have tried erasing all of the apps, I've tried restoring my iphone through itunes, and I am still having the same problem.

I just started having this problem last night but only for the last three apps I purchased. Have you found a solution? It's very annoying. Oh, and the incorrect icons are slightly grayer than the others. This was my first clue...

Fonts not showing correctly only when on my account page on app store

fonts not showing correctly only when on my account page on app store

Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
Secondly, try all the other ports on your computer, even a number of times.
Thirdly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs
And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://www.apple.com/support/ipad/assistant/itunes/

The web site of Adobe does not show correctly in FireFox

I have a bizarre problem. The site of Adobe (including where I can download the flash player) does not show correctly in FireFox and I only see it as a text HTML page, but without most images (typically, for instance, I do not see the image "Download now" but see a text line "Dowload now", and so on...
This seems to specifically affect the Adobe web site as I have no problme for other web sites (so far).
It is something specific to FireFox as I do have the problem with Internet Explorer.
The problem persis even if I restart FireFox without any add-on (safe mode).
Any suggestion ?

Does this only happen in Firefox? What do you see with Internet Explorer or Chrome? If it is only Firefox, I'd try these steps in this order:
1. Clear your cookies and cache
2. Reset your Firefox settings
3. Make a new profile
Chris

MiniDV Video in Affert Effects not showing correct ratio.

I'd like to know how to edit minidv video in its aspect ratio in After Effects. Video is 720 by 480 and 16 by 9 (non-square pixels). When I import the video, it's stretched too tall (set to square pixels I believe). No mater how many times I change the composition ration to widescreen, it still does not show correctly.
I seem to do fine in Premiere. It automatically sets the aspect ratio for minidv video. But I can't get After Effects to do it. I don't want to spend time creating something only for it to be squished in Premiere later.
So how to do create a composition that's 16 x 9 using non-square pixels 720 by 480 that can be edited into miniDV video in adobe premiere?

If you properly interpret your footage as widescreen (AE may guess incorrectly here) and put it in any square pixel comp it will not look distorted but it may or may not fill the frame. It will only fill the frame if the frame size is the square pixel equivalent size of your widescreen footage. This applies to all non square pixel aspect ratio footage.
If you interpret your footage as widescreen and put it in the same format (NTSC, PAL HDV) widescreen comp it will also fill the frame. There may be some black pixels on the left and right side because almost all cameras don't put live pixels in every column or even every row of the frame, but the footage will fill the frame. The caveat is that this footage will look distorted unless you activate pixel aspect correction preview in the Comp window because computer displays are always square pixels. You have to fool the display by selecting this option.
When you render your widescreen comp, if you're using any of the standard DV codecs or a codec like Quicktime Animation or JPG, there is no place in this codec for an aspect ratio tag that will tell apps like Premiere or FCP or Avid that this footage is supposed to be widescreen. Once you import the footage to another app you'll have to check and make sure that the footage is interpreted as widescreen there too.
I hope this helps. What ever you do, do not use the Fit to Frame option to force footage into a comp frame. If you insist on using Fit to Frame then check the X and Y scale values after you do and make sure they are identical. If they are not, you've distorted your footage at that point and it will be difficult or impossible to fix it later.

I am using firefox 24.0 and my facebook page is not showing correctly

in my pc facebook webpage is not showing correctly but i have tried in another pc at there my fb page is showing correctly

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

Health app not counting calories - "No Data"

Recently purchased an iPhone 6 and have updated to iOS 8.2. The Health app is counting steps and walking & running distance, but Active Calories and Resting Calories display "No Data". I have entered my weight, height, age and sex. Am I missing something here? Is the Health app not supposed to automatically calculate and record calories burned?

As far as I know, automatic step tracking is only available for iPhone 5S or higher due to M7/M8 motion co-processor.
Edit: Confirmed by an article on 9to5mac.
''Users will find that the M7 is able to pre-populate the Health app with a full week of data.
Adding on-device tracking support to the Health app is a significant addition from Apple as iPhone 5s (and future iPhone) customers will no longer even need to integrate any App Store apps or hardware devices to begin using the software.'
Taken from this article on 9to5mac.

Health App not showing correct steps

Similar Messages

Maybe you are looking for