Health App sleep analysis

I'Be tried a few different sleep monitoring apps - Fitbit, Jawbone, Sleep Cycle and the Withings Aura - and get a lot of good data from them but when I connect. To the Health App all I get is a vertical bar on the week data chart to show how long I was in bed and a horizontal bar on the daily view.
is this really all it pulls through and shows in the health app?  The areas around steps etc seem quite detailed but the sleep data is pretty useless unless I'm missing something.
Also, is there any way to log other health related stats such as cholesterol which I know can't be done from any app but I have a full medical every year and would like to be able to manually input some of the outputs I get from that.
IS there any forum for feeding suggestions/requests to Apple or would it just rely on them monitoring these posts?
thx
David

The Health App really serves as a conduit between a variety of other apps that wouldn't ordinarily be able to talk to each other. The App Store has a section for apps that work with Health to be able to sync data.
You can submit feedback to Apple here:
http://www.apple.com/feedback
Don't stress to much if you can't find a section dedicated to Health. Pick something under "iPhone" and just make sure you explain it well.

Similar Messages

  • Health app: bug in daily average for sleep in year view?

    I've manually entered sleep time for everyday since August 2014 in the Health app (on iOS 8, on an iPhone 6).
    In Day, Week, and Month view, the daily average seems correct (resp. 7h49, 7h09, 7h09).
    But it is obviously wrong in the Year view (12h36mn).
    Also the graph in the Year view is wrong. (The bar for August is twice as high as the one for October for instance.)
    (I've check -3 times- that these manually entered data were correct.)
    Does anybody experience the same problem?
    Or as any idea what the bars, in the Year Graph, are supposed to represent? (daily average for each month? or total sum of sleep time for the month?)
    Thanks in advance!
    Antoine

    The Health App really serves as a conduit between a variety of other apps that wouldn't ordinarily be able to talk to each other. The App Store has a section for apps that work with Health to be able to sync data.
    You can submit feedback to Apple here:
    http://www.apple.com/feedback
    Don't stress to much if you can't find a section dedicated to Health. Pick something under "iPhone" and just make sure you explain it well.

  • Sleep Analysis Not Recording

    I seem to be having a similar problem to the one described at If your Health data doesn't update, but instead with the Sleep Analysis data in Health.
    I'm using the Sleep Cycle app to track sleep and it's set to share data with Health.  The data in Health always shows how much sleep I got last night, but only showed data including previous days for about three days.  From that point since, the charts do not appear.
    Further, when I wake up (presumable when the app writes the data to Health) my phone gets incredibly hot for a few minutes, then cools down.  If I happen to look at the Health app during this time, the app always hangs up until I go to the home screen, double-press the home button, and swipe up on the Health app to quit.
    I reached out to Sleep Cycle first and they said no one else has reported this kind of error and to contact Apple, either the discussion forum or their support directly, to work on a resolution.  I have also attempted restarts, hard restarts, and the "If your Health data doesn't update" steps above with no success.
    Has anyone else seen this behavior?

    You have to elaborate a bit mor about your problem starting what version of GB you are using.
    When you record "a song", do you hear and see (the meters on the Track) that signal?
    How do you record your signal (hardware connection)?
    When you record on an Audio Track (in GarageBand X), the Audio Region should be blue or purple and not orange.

  • I phone health app!

    I'm using iphone 5s, my health app dashboard is not good working. specially fiber, sleep analysis and some others option is really not working. Only steps and walking option is working. I don't know how can i set the more option. Help me please, thanks...

    KawsarBD wrote:
    "Health app" There are have many more option i mean Running Distance, Sleep Analysis, Fiber, Steps, Weight like that. and there only Steps and Running Distance option is correctly working. So now i want to know how can i work done more option? 
    That's because distance and steps are the only thing the iPhone can measure on its own. It has to get the other data from somewhere. That somewhere is generally other apps. I have a Withings scale. It connects to the Withings app by WiFi and that app sends my weight data to Health. I use My Fitness Pal to track food intake. That data gets sent to the Health app. My Fitness Pal can also use the weight data from Health that I sent there from my Withings app.
    Search the App Store for apps that work with Health.

  • Fitbit Activity to Health App Successfully Working

    I was able to get my Fitbit activity (total steps, total floors climbed, total distance walked, total calories burned, sleep, and weight). You will need to install the Jawbone Up app (purple icon) and the IFTTT app. Create accounts in both apps. Log into the Up app and have the app send info to the Health app. Log into the IFTTT app and add the Fitbit and Up Channels. Add the Log Fitbit Activities to Jawbone Up, Fitbit Sleep to Jawbone Up, and Log Fitbit Weight to Jawbone Up recipes (the will be under the Fitbit Channel and the icon with have the Fitbit logo on the left and the Up icon on the right). You will get a notification on your phone from the IFTTT app when the recipe runs.
    Hope this helps everyone.

    HI, I'll see. There is also other app called SYnc solver for Fitbit. but I'd like something free because if Fitbit deny the access to data by third party app these app stop working.

  • Health app, is it possible to display weight and distance in imperial rather than metric ?

    health app, is it possible to display weight and distance in imperial rather than metric ?

    Hao,
    first of all, you are using a chart which has three options for updates if the chart is "full":
    Strip chart (default)
    Scope chart
    Sweep chart
    These are called "update mode". Test the modes yourself.
    Also you have to know that you will not likely have an integer number of periods of your signal in the display of the chart. Therefore, a continuous signal will "move" the graph from update to update.
    You can implement some algorithm to discard data to maintain a static "trigger" level for display, but as stated, it will leave gaps in the signal. These gaps are not a concern unless you use the displayed signal for analysis (e.g. FFT).
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • Apple Health App-Bug

    I find Apple's Health app only reports and exports the first sleep session of a day. For instance, today it reports me sleeping 3 hours rather than my six (two 3-hour sessions).
    Does anyone else see this?

    Hi Ralph,
    I had this same exact issue as well as my iTunes library.I was able to resolve it by doing the following:
    1. Open Settings
    2. Tap on iTunes & App Store
    3. Tap your Apple ID
    4. Tap View Apple ID
    5. Sign into the store
    6. Tap done
    7. Launch iTunes Radio and try again!
    I hope the above resolves it for you.

  • Ios8 Health App Work with FItbit

    WIll the FItbit App and IOS8 Health App

    I asked Fitbit and this is the response I got. 
    "We are glad to help with your inquiry about integrating Fitbit with the iOS health app.
    Currently, this app is not listed in the authorized apps to have the availability to interact with Fitbit.com. However, we are taken your suggestion into consideration and hope that we can implement something like this in the future. Meanwhile, we suggest to contact the app provider.
    For a list of the available apps, please see here: https://www.fitbit.com/apps
    Let us know if you have any additional questions."
    So How do we make that request of Apple to authorize and draw over data from fitbit.  I store calories, sleep and activity through their app and don't want to have a bunch of new apps to do what this on app does, although I want to use HEALTH...
    Feeling a little like I'm getting the run around. 

  • Apple Health app for iPad (and Personal Health Record)

    Is the Apple Health App only for exercising and doing physical activities ... or ... will it be for keeping one's "Personal Health Record" on your iOS device?
    I would hope that Apple would have their Health app for keeping records like doctors' visits, health records, lab results, hospital stays, doctor lists, reminders for appointments, keeping weight data over the long term, BMI, blood pressure and so on. All this kind of stuff is very well suited to be done on the iPad and I was looking for the Apple Health app (for the iPad) to see if Apple incorporated this "full functionality" for "health" for people to use. I just can't find the Health app to use on the iPad.
    I've already downloaded several apps separate from Apple which are supposed to keep records and doctors visits and lab results and blood pressure ... etc, and etc ... but I haven't found them to be completely adequate. No one is able to provide a fully functional and complete health record and all its functionality (including x-rays and lab results and analysis) for iOS devices.
    I suppose that the field is "too new" for the iOS devices to be fully functional yet ... but I would hope that Apple would "get there" first, with its "Health app".

    kenpenn wrote:
    My iphones, that get tossed every 24-36 months, have 16GB of memory,
    Which is no reason you can't still store your Health data on it. The Health data can be transferred from one phone to the next if you use an encrypted back up.
    Apple appears to have been looking at the iPhone as a collector of data and Health as the front end to that as well as a repository of information collected from other sources. As an iPad currently can't collect the data the way an iPhone does, the function of the Health app would be slightly different than on an iPhone. I'm not suggesting there is anything "wrong" with how you would like to use Health, only that it appears to be a bit different than how Apple thinks Health should be used. Submit feedback to Apple letting them know what you'd like to see.
    Personally, I really find the Health app only useful as a transfer conduit at this time. I find myself rarely looking at the dashboard. Perhaps my opinion will change with the release of the Apple Watch.

  • Health app not graphing data points.

    I have been playing around with the new Health app recently. I do not use any third party apps for Health, but I am running iOS 8.0.2 anyway. So far, I have plotted 4 points on the sleep monitor, for example. I can press Show All Data to see the individual sleep and wake times I inputted, but they are not showing up graphically as the data "Points" that I wanted to add. Instead, the graph (which I added to Dashboard) just says No Data.

    I have the identical problem with the Walking/Running Distance App in Health.  If I manually enter that I walked 1.75 miles it is 50/50 whether that shows up on the graph.  This makes the walking distance data useless if one doesn't want to wear the iPhone while walking.

  • Health app not importing data

    I have the Health app connected to UP (for steps and sleep), Withings (for weight, BMI, heart rate) and Lose It! (for calories and other nutritional data). It is importing the steps from UP just fine, but it will not import anything else. It used to import sleep from UP, but that stopped on Oct. 8; it used to import weight, but that stopped on Oct. 22. It never imported anything from Lose It.
    I am running the newest iOS and the newest versions of all of these apps (including the new UP 4.0, released today, and others on UP's message boards report their issues have resolved with the update - not mine). All of them appear to be connected to Health - that is, under Sources they are all there and 'turned on,' and each of the individual apps' settings shows them as exporting to Health.
    Anyone have any fixes? Ideas?

    EdHDC,
    I'm sorry that I don't have a fix for your issue, but I did want to mention that if you end up in a scenario where you get things working and find that you have data prior to your fix that doesn't automatically get imported in, we have released an app specifically for importing data into HealthKit / Health App.  It requires data in a CSV (comma separated value) format currently, but that is the format that most apps provide for their exported files.
    The app is called Health Importer and more information is available on the App Store at:  https://itunes.apple.com/us/app/health-importer/id930943780?ls=1&mt=8
    Hope it's a helpful tool for you or others who come across the post!

  • Problem with steps in health app!!

    Hello guys, i have problem with my health app, i enable steps in the app but it doesnt count even a single step, it says "No Data". I searched in the Internet the way i can enable steps and did exactly what it says but nothing. Can someone help?

    you can use 3rd party apps to monitor your activity, but this will drain you iPhone Battery significantly more than if using the integrated Motion coprocessor.

  • How can I download the new Apple health app on my ipad mini?

    I Don't know how to download the new Apple health app on my iPad mini. its the one that you get when you do the new update on iphone. With the white backround and red heart. Thanks

    You might give Apple some "feedback" on wanting to have it ...
    https://www.apple.com/feedback/

  • How to delete duplicate datasets in iOS health app?

    I synchronize my POLAR activity tracker with my iPhone to collect and visualize the number of steps in the Health app. In most cases it works perfect, but sometimes the data are completely to high. So I have days with more than 600.000 steps, but the list of data points shows thousends of duplicate entries.
    Is there an easy way to remove the duplicate data?

    Hi Tidbits,
    I ended up going to Best Buy, where I got my LG G3 Verizon phone. The Tech tried everything to correct the duplication, but could not find how to do it. He deleted everything, and went back to factory settings. Darn if the duplicates didn't come back.
    He went to my Verizon account, and went to the Verizon Cloud. Clicked on Contacts, and there were all the duplicate contacts. He deleted the duplications, leaving the original for each contact. BINGO the problem was solved.
    I am using the Standard Messaging instead of Verizon messaging Plus. The Tech said that if I had been using Using Verizon Messaging Plus this may not of happened. I just down want the added cost of Messaging Plus.
    Thanks for the response.

  • "medical id" is missing from my health app on my iPod touch 5th gen running iOS 8

    Along the bottom of the health app on my iPod touch 5th gen running iOS 8 I am missing the "medical id" that should be the 4th icon on the lower right of the screen

    You can't seriously believe users would be *that* idiotic, even on a sue-happy country like the US… And while Apple could get sued, it's not like Apple Legal would lose a case like that; for someone to die in the first place *because of the iPod Touch*, first-responders (be them regular bystanders or medical professionals) would have to be stupid enough to believe they could use it to make calls and not try doing that using instead, duh, a regular phone that they would likely be carrying with them anyway, and for Apple to be in the least bit accountable, the interface would have to misdirect them and make them believe they could in the first place.
    Except it doesn't. It never did. The iOS interface, on the iPod Touch, has no references whatsoever to calling functions, be they regular or emergency-related. If you tap a phone number detected by smart filters, you can't dial it (I believe you're offered the option to save it on the Address Book, though), and on the lock screen, there is no “Emergency Call” function (nor would there be such a function on the Health ID page, either). So… I fail to see your point.
    And you can't seriously believe Apple would risk, on purpose, a lawsuit by the family of someone who, having both an iPhone *and* an iPod Touch (not very likely, I know, but please bear with me) dies because s/he is carrying only the iPod Touch and unwittingly (but understandably) expects *all* Health and the potentially *life-saving* Health ID info to sync across devices via iCloud.
    Nope, this is an oversight by Apple devs, and a massive one at that.
    P.S.: A massive legal/functional disclaimer, such as “Warning: This device cannot connect to the cellular network. For emergency calls please use an appropriate device” or something along those lines would pretty much exempt them from any legal responsibility, while still enabling a life-saving feature.

Maybe you are looking for

  • Glibc-2.9.2-i686 breaks apache and causes problems with samba?

    I could not start the apache daemon.  The output from /usr/sbin/apachectl start is httpd: ../sysdeps/posix/getaddrinfo.c:1465: rfc3484_sort: Assertion `src->results[i].native == -1 || src->results[i].native == a2_native' failed. /usr/sbin/apachectl:

  • Upgraded to larger HD cannot retrieve from earlier backups on Time Capsule... help!

    Hi I Took out my small, original HD and upgraded to larger HD. Cloned my computer and reistalled it onto the new HD. Now, I cannot retrieve from earlier backups from older HD. I can see the data in pink on right, but it refuses to go past  the day of

  • How to Access v$ views from inside PL/SQL?

    I cannot grant select on these v$'s for users. Could someone recommned a solution for something like: function conn_cnt(v_name in varchar2, v_stat varchar2) return number is p_val number := 0; begin EXECUTE IMMEDIATE 'SELECT COUNT(*) FROM V$SESSION W

  • Need a little help?

    I left for work today after using my mac book pro and when I came home it will not start. I turned it off with no problem before I left but now all it does is power up for a few seconds and then off. All that lights up is the light next to the screen

  • DV2000 has a bad hdd that won't power up

    This DV2000 i'm working on has a bad hdd that won't power up & used a usb device to clarify the issue. Shouldn't the system bootup to bio's even though the hdd is gone? Worked on alot of desktops & I know they should boot to bio's so you can set the