Health Check condition

Hi All,
I'm having difficulty establishing a VPN when I specify a health check condition in a network policy.
The vpn establishes ok without the policy however the client presents an error 812 (authentication error) when the health check condition is specified.
The only other condition is a windows group. the VPN is a PPTP tunnel for testing purposes. the client is a win 7 machine.
any help appreciated

Hi,
VPN error 812: The connection was prevented because of a policy configured on your RAS/VPN server. Specifically, the authentication method used by the server to verify your username and password may not match the authentication method configured in your
connection profile. Please contact the Administrator of the RAS server and notify them of this error.
You may try to specify the authentication protocol on the server – which matches the settings on the client side. Detailed information about VPN error 812 you may reference the link below:
Troubleshooting common VPN related errors
http://blogs.technet.com/b/rrasblog/archive/2009/08/12/troubleshooting-common-vpn-related-errors.aspx
If the problem still exits, according to your description, my understanding is that VPN(PPTP) prompts error 812 once a health check condition policy is specified. There might be a problem about the health check condition policy, check the setting of the
policy, delete/renew another one.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

HT3782 What does it mean "Battery Health" Check battery in the battery menu bar?

What does it mean "Battery Health" Check battery in the battery menu bar?

Check the full status by going to the apple in the left side of the menu bar, About This Mac, More Info, System Report, Hardware, Power and see what it says about the Cycle count, Battery Condition, Battery Capacisty, charge remaining.
Condition should be Normal or there is a problem
Ratio of charge remaining to cpacity should be close, round off, to the reported battery charge percentage.
Cycle count tells how many charge cycles the battery has been through, typical lifetime cycle count for a current generation battery is 1,000 cycles.

Battery Health: Check Battery

Mid-2010 Macbook Pro. I use the app Watts to alert me as to when I need to condition the internal battery, which is done on a monthly basis. Just yesterday, right before the regularly scheduled monthly conditioning reminder was seen, I happened to click on the battery icon in the menu bar. In the drop down window was a yellow triangle with an exclamation point in it along with the words "Battery Health: Check Battery". At first I didn't think much about it, as soon afterwards the Watts app kicked in to remind me of the upcoming conditioning.
The conditioning has been done as per Watts' suggestion but the yellow triangle is still there.
Clicking on it brought me to an Apple support page (HT3782) for the battery menu extra bar, where the exact wording of the alert on my Macbook is not seen nor mentioned. Just as a precaution I've followed the steps suggested *prior* to resetting the SMC (sleep, restart, shutdown). The yellow triangle remains.
What's a Macbook Pro owner to do at this point?

Current Battery Cycle count is 538. Full charge capacity (mAh): 4273.
The laptop was purchased in October 2010 with Apple Care. What puzzled me was not being able to verify the meaning of the particular message in the battery extra menu bar.
If in fact this installed battery is at its expected life's end and a replacement is warranted, it's a blessing in disguise, as it has never performed anywhere near its nominal estimated life: despite efforts on my part to monitor screen brightness, turn BlueTooth off, quit unused applications and turn WiFi off when connected to Ethernet I've never been able to get more than 5 hours' use out of a fully-charged battery.
Thanks, leroydouglas and mende1 for the prompt replies and suggestions!

Cin health check..

hi friends,
           can anyone tell me about cin health check,
                            i have ran the transaction cin health check, it is showing red for many conditions type..
             what might be the reason...

Hi
This program is to check the correctness of the customizing settings after completing
the customizing and before starting the testing
Red icon indicates wrong or no g/l assigned to these transaction types. check under log generaltax on goods movemntindiaaccount determination-Specify G/L Accounts per Excise Transaction
for ex:
Tax Condition - JMO2 / JAO2 / JS02 / JIP1 / JIP2
Account Key          = 'NVV'      - Non Deductable
G/L Accounts    is not blanks     - Attached to the account key
Tax not Deductable Flag = 'X'     - Settings in Account Key
Tax Type             = 2          - Input Tax - Settings in Account Key
Posting without Tax = *          - Settings in G/L Account Master
Tax Category         = '*' or '<' - Settings in G/L Account Master
Also just click on the info button in J1I0 to know more details.
Reg
Raja

BADI/User Exit for Checking Conditions in TRM Transactions

Hi All,
I have to check some conditions before saving the transaction FTR_CREATE. So that based on that condition it will be known that whether that transaction will save or not. I found some BADIs, but those are particularly working for Money market and derivatives. For my Req, I need a BADI which will check conditions for both Money market and Securities.
Exact req is, Based on Portfolio and PaymentAmount i have to restrict the transaction. Those will found in 2 tables VTBFHA and VTBFHAPO. But many BADIs doesnt contain VTBFHAPO.
If any one working on TRM can u help me out ?

>
priya tavanam wrote:
> Hi Frds,
>
> I am using the FTR_TR_GENERIC Badi. In that one method is : EVT_TRANSACTION_SAVE_CHECK. In that one parameter is PI_PROXY_TRANSACTION. I want to get the attributes of Method A_TAB_CASHFLOW . That is : A_TAB_CASHFLOW~BZBETR.
-->whats ur code to read those values , it should be
lt_cashflow[] = PI_PROXY_TRANSACTION->a_A_TAB_CASHFLOW [ ] ' .
But i am unable to access this value in BADI. how access this. Can any one help me on this.

How can I support a health check, from a load balancer?

My company has load balancers which use health checks to determine if the end point is available for client traffic. The basic health check is a tcp ping, and will tell you if the device is on the network. The next level of health check is an http request. This request, and the response are static, you can’t create your own version of the request and response. The standard request is this:
     http://host:port/healthcheck/hc.html
The standard response is this:
     “The server is available”
I want to use the load balancer as part of my total deployment. The problem is that I am not seeing how to support this health check request and response in the MDEX engine. What I see is this request
     http://host:port/admin?op=ping
Will return this response
     dgraph <host>: <port> responding at <day month year time>
It is nice that there is a built in ping, but I am not able to make use of it. I am new to Endeca and still poking around. The dgraph process listens on a port set up in <…>/config/script/AppContext.xml
<dgraph id="Dgraph1" host-id="MDEXHost" port="3281">
<properties>
<property name="restartGroup" value="A" />
<property name="updateGroup" value="a" />
</properties>
<log-dir>./logs/dgraphs/Dgraph1</log-dir>
<input-dir>./data/dgraphs/Dgraph1/dgraph_input</input-dir>
<update-dir>./data/dgraphs/Dgraph1/dgraph_input/updates</update-dir>
</dgraph>
(I am not using the default port, as I only have an instance on a shared server and have to worry about port clashing. But that is a different thread.)
In a standard tc Server install I can support this health check by doing this:
* Create a directory named “healthcheck”, in the “webapps” directory.
* Place a file name “hc.html” in that directory, which contains “The server is available”
The one hack which comes to mind is to write a servlet which would be able to be a smart proxy for the load balancer health check. It would pass along any regular traffic to the MDEX engine. But if the request was a health check it would send “admin?op=ping” to the MDEX engine, and for a good response from the engine, create and pass back the correct response to the load balancer.
Ideas, comments, flames, …
Thanks

Hi, we are using following String to test the MDEX ping response but we get the invalid version formation on dgraph.log -
following is on F5
GET /admin?op=ping HTTP/1.1/r/nHost:myhost.endeca.com:19000/r/nConnection:close/r/n/r/n
Following gets logged on Dgraph.log
WARN 09/05/12 05:30:03.799 UTC (1346823003799) DGRAPH {dgraph} Invalid version format in 'HTTP/1.1/r/nHost:myhost.endeca.com:19000/r/nConnection:close/r/n/r/n'
Please let me know - if you have any suggestions to solve this issue.
I know that it works from browser and wget from unix with following commands.
wget http://myhost.endeca.com:19000/admin?op=ping - from unix command line
from browser:
http://myhost.endeca.com:19000/admin?op=ping
Thanks,
Ram

Health Check in Exchange 2007 Scripting

Hi All,
I have been looking around for scripts which would help me perform regularised health checks in my enviornment. After lot of googling i was able to get a script which would meet my requirements. However i have a few challenges involved in extracting some
more information:
1. Mailbox Store Size, Free Diskspace percentage for mailbox servers
2. Remote Mail flow Tests & Mailflow test to every exchange 2007 mailbox servers in org.
3. Automating Email of collected data (in HTML) to Administrator.
4. Executing the script Automatically without triggering it from Exchange Management Shell.
Script Below
param( [string] $auditlist)
Function Get-CustomHTML ($Header){
$Report = @"
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Frameset//EN" "http://www.w3.org/TR/html4/frameset.dtd">
<html><head><title>$($Header)</title>
<META http-equiv=Content-Type content='text/html; charset=windows-1252'>
<meta name="save" content="history">
<style type="text/css">
DIV .expando {DISPLAY: block; FONT-WEIGHT: normal; FONT-SIZE: 8pt; RIGHT: 8px; COLOR: #ffffff; FONT-FAMILY: Arial; POSITION: absolute; TEXT-DECORATION: underline}
TABLE {TABLE-LAYOUT: fixed; FONT-SIZE: 100%; WIDTH: 100%}
*{margin:0}
.dspcont { display:none; BORDER-RIGHT: #B1BABF 1px solid; BORDER-TOP: #B1BABF 1px solid; PADDING-LEFT: 16px; FONT-SIZE: 8pt;MARGIN-BOTTOM: -1px; PADDING-BOTTOM: 5px; MARGIN-LEFT: 0px; BORDER-LEFT: #B1BABF 1px solid; WIDTH: 95%; COLOR: #000000; MARGIN-RIGHT:
0px; PADDING-TOP: 4px; BORDER-BOTTOM: #B1BABF 1px solid; FONT-FAMILY: Tahoma; POSITION: relative; BACKGROUND-COLOR: #f9f9f9}
.filler {BORDER-RIGHT: medium none; BORDER-TOP: medium none; DISPLAY: block; BACKGROUND: none transparent scroll repeat 0% 0%; MARGIN-BOTTOM: -1px; FONT: 100%/8px Tahoma; MARGIN-LEFT: 43px; BORDER-LEFT: medium none; COLOR: #ffffff; MARGIN-RIGHT: 0px; PADDING-TOP:
4px; BORDER-BOTTOM: medium none; POSITION: relative}
.save{behavior:url(#default#savehistory);}
.dspcont1{ display:none}
a.dsphead0 {BORDER-RIGHT: #B1BABF 1px solid; PADDING-RIGHT: 5em; BORDER-TOP: #B1BABF 1px solid; DISPLAY: block; PADDING-LEFT: 5px; FONT-WEIGHT: bold; FONT-SIZE: 8pt; MARGIN-BOTTOM: -1px; MARGIN-LEFT: 0px; BORDER-LEFT: #B1BABF 1px solid; CURSOR: hand; COLOR:
#FFFFFF; MARGIN-RIGHT: 0px; PADDING-TOP: 4px; BORDER-BOTTOM: #B1BABF 1px solid; FONT-FAMILY: Tahoma; POSITION: relative; HEIGHT: 2.25em; WIDTH: 95%; BACKGROUND-COLOR: #CC0000}
a.dsphead1 {BORDER-RIGHT: #B1BABF 1px solid; PADDING-RIGHT: 5em; BORDER-TOP: #B1BABF 1px solid; DISPLAY: block; PADDING-LEFT: 5px; FONT-WEIGHT: bold; FONT-SIZE: 8pt; MARGIN-BOTTOM: -1px; MARGIN-LEFT: 0px; BORDER-LEFT: #B1BABF 1px solid; CURSOR: hand; COLOR:
#ffffff; MARGIN-RIGHT: 0px; PADDING-TOP: 4px; BORDER-BOTTOM: #B1BABF 1px solid; FONT-FAMILY: Tahoma; POSITION: relative; HEIGHT: 2.25em; WIDTH: 95%; BACKGROUND-COLOR: #7BA7C7}
a.dsphead2 {BORDER-RIGHT: #B1BABF 1px solid; PADDING-RIGHT: 5em; BORDER-TOP: #B1BABF 1px solid; DISPLAY: block; PADDING-LEFT: 5px; FONT-WEIGHT: bold; FONT-SIZE: 8pt; MARGIN-BOTTOM: -1px; MARGIN-LEFT: 0px; BORDER-LEFT: #B1BABF 1px solid; CURSOR: hand; COLOR:
#ffffff; MARGIN-RIGHT: 0px; PADDING-TOP: 4px; BORDER-BOTTOM: #B1BABF 1px solid; FONT-FAMILY: Tahoma; POSITION: relative; HEIGHT: 2.25em; WIDTH: 95%; BACKGROUND-COLOR: #7BA7C7}
a.dsphead1 span.dspchar{font-family:monospace;font-weight:normal;}
td {VERTICAL-ALIGN: TOP; FONT-FAMILY: Tahoma}
th {VERTICAL-ALIGN: TOP; COLOR: #CC0000; TEXT-ALIGN: left}
BODY {margin-left: 4pt}
BODY {margin-right: 4pt}
BODY {margin-top: 6pt}
</style>
<script type="text/javascript">
function dsp(loc){
   if(document.getElementById){
      var foc=loc.firstChild;
      foc=loc.firstChild.innerHTML?
         loc.firstChild:
         loc.firstChild.nextSibling;
      foc.innerHTML=foc.innerHTML=='hide'?'show':'hide';
      foc=loc.parentNode.nextSibling.style?
         loc.parentNode.nextSibling:
         loc.parentNode.nextSibling.nextSibling;
      foc.style.display=foc.style.display=='block'?'none':'block';}}
if(!document.getElementById)
   document.write('<style type="text/css">\n'+'.dspcont{display:block;}\n'+ '</style>');
</script>
</head>
<body>
<b><font face="Arial" size="5">$($Header)</font></b><hr size="8" color="#CC0000">
<font face="Arial" size="1"><b>Version 1 |M & C | <A HREF='http://mail.exchange.com'>mail.exchange.com</A></b></font><br>
<font face="Arial" size="1">Report created on $(Get-Date)</font>
<div class="filler"></div>
<div class="filler"></div>
<div class="filler"></div>
<div class="save">
Return $Report
Function Get-CustomHeader0 ($Title){
$Report = @"
<div class="dspcont0">
<h1><a href="javascript:void(0)" class="dsphead0" onclick="dsp(this)">
<span class="expando">show</span>$($Title)</a></h1>
<div class="dspcont0">
Return $Report
Function Get-CustomHeader ($Num, $Title){
$Report = @"
<h2><a href="javascript:void(0)" class="dsphead$($Num)" onclick="dsp(this)">
<span class="expando">show</span>$($Title)</a></h2>
<div class="dspcont">
Return $Report
Function Get-CustomHeaderClose{
$Report = @"
  </DIV>
  <div class="filler"></div>
Return $Report
Function Get-CustomHeader0Close{
$Report = @"
  </DIV>
  <div class="filler"></div>
Return $Report
Function Get-CustomHTMLClose{
$Report = @"
</div>
</body>
</html>
Return $Report
Function Get-HTMLTable{
param([array]$Content)
$HTMLTable = $Content | ConvertTo-Html
$HTMLTable = $HTMLTable -replace '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">', ""
$HTMLTable = $HTMLTable -replace '<html xmlns="http://www.w3.org/1999/xhtml">', ""
$HTMLTable = $HTMLTable -replace '<head>', ""
$HTMLTable = $HTMLTable -replace '<title>HTML TABLE</title>', ""
$HTMLTable = $HTMLTable -replace '<', "<"
$HTMLTable = $HTMLTable -replace '>', ">"
$HTMLTable = $HTMLTable -replace '</head><body>', ""
$HTMLTable = $HTMLTable -replace '</body></html>', ""
Return $HTMLTable
Function Get-HTMLLink ($activeURL){
$Report = @"
<a href=$activeURL>$activeURL</a>
Return $Report
Function Get-Ink ([String]$inData){
[String]$inclPercentage = @(35..100)
$positive = ($inclPercentage, 'Success', 'Ready', 'Running', 'OK', 'True', 'Information')
If ($positive -match $inData)
$Report = @"
<font color='#009900'>$inData</font>
Else
$Report = @"
<font color='#FF0000'>$inData</font>
Return $Report
Function Get-HTMLBasic ($Detail){
$Report = @"
<TABLE>
<tr>
  <td width='75%'>$($Detail)</td>
</tr>
</TABLE>
Return $Report
Function Get-HTMLDetail ($Heading, $Detail){
$Report = @"
<TABLE>
<tr>
<th width='25%'><b>$Heading</b></font></th>
<td width='75%'>$($Detail)</td>
</tr>
</TABLE>
Return $Report
$input | foreach {$targets += @($_)}
If ((Test-Path variable:\targets) -eq $True){
   Write-Host "Server list input detected on pipeline" -ForegroundColor Yellow
Else{
if ($auditlist -eq ""){
   Write-Host "No server list specified, getting all Exchange 2007 servers" -ForegroundColor Yellow
   $targets = Get-ExchangeServer | Where-Object {$_.IsExchange2007OrLater -eq $True}
  else
   if ((Test-Path $auditlist) -eq $false)
    Write-Host "Invalid server list specified: $auditlist" -ForegroundColor DarkRed
    exit
   else
    Write-Host "Using Audit list: $auditlist" -ForegroundColor Cyan
    $Targets = Get-Content $auditlist
$now = Get-Date
#Custom Expressions
$latencyMS = @{Name="Latency(MS)";expression={[Math]::Round(([TimeSpan] $_.Latency).TotalMilliSeconds)}}
$MessageLatencyTime = @{Name="MessageLatencyTime";expression={[Math]::Round(([TimeSpan] $_.Latency).TotalMilliSeconds)}}
$hotLink = @{Name="URL";expression={Get-HTMLLink ($_.URL)}}
$colourResult = @{Name="Result";expression={Get-Ink ($_.Result)}}
$colourStatus = @{Name="Status";expression={Get-Ink ($_.Status)}}
$colourType = @{Name="Status";expression={Get-Ink ($_.Type)}}
$newResult = @{Name="Result";expression={If ($_.Result.ToString() -ne 'Success'){Get-Ink ('Failure')} Else {Get-Ink ('Success') }}}
$fullReport = Get-CustomHTML "Exchange 2007 "
$fullReport += Get-CustomHTMLClose
Foreach ($Target in $Targets){
Write-Host "Collating Detail for $Target" -ForegroundColor Yellow
Write-Host "..getting basic computer configuration"
$ComputerSystem = Get-WmiObject -computername $Target Win32_ComputerSystem
switch ($ComputerSystem.DomainRole){
  0 { $ComputerRole = "Standalone Workstation" }
  1 { $ComputerRole = "Member Workstation" }
  2 { $ComputerRole = "Standalone Server" }
  3 { $ComputerRole = "Member Server" }
  4 { $ComputerRole = "Domain Controller" }
  5 { $ComputerRole = "Domain Controller" }
  default { $ComputerRole = "Information not available" }
$OperatingSystems = Get-WmiObject -computername $Target Win32_OperatingSystem
$TimeZone = Get-WmiObject -computername $Target Win32_Timezone
$Keyboards = Get-WmiObject -computername $Target Win32_Keyboard
$SchedTasks = Get-WmiObject -computername $Target Win32_ScheduledJob
$BootINI = $OperatingSystems.SystemDrive + "boot.ini"
$RecoveryOptions = Get-WmiObject -computername $Target Win32_OSRecoveryConfiguration
$exServer = Get-ExchangeServer | where {$_.Name -eq "$Target"}
$exVersion = "Version " + $exServer.AdminDisplayVersion.Major + "." + $exServer.AdminDisplayVersion.Minor + " (Build " + $exServer.AdminDisplayVersion.Build + "." + $exServer.AdminDisplayVersion.Revision + ")"
switch ($ComputerRole){
  "Member Workstation" { $CompType = "Computer Domain"; break }
  "Domain Controller" { $CompType = "Computer Domain"; break }
  "Member Server" { $CompType = "Computer Domain"; break }
  default { $CompType = "Computer Workgroup"; break }
$LBTime=$OperatingSystems.ConvertToDateTime($OperatingSystems.Lastbootuptime)
$MyReport += Get-CustomHeader0 "$Target - Role(s): $($exServer.ServerRole)"
$MyReport += Get-CustomHeader "2" "Basic Server Information"
  $MyReport += Get-HTMLDetail "Computer Name" ($ComputerSystem.Name)
  $MyReport += Get-HTMLDetail "Computer Role" ($ComputerRole)
  $MyReport += Get-HTMLDetail "Exchange Role(s)" ($exServer.ServerRole)
  $MyReport += Get-HTMLDetail "Last System Boot" ($LBTime)
  $MyReport += Get-CustomHeaderClose
  Write-Host "..getting logical disk configuration"
  $Disks = Get-WmiObject -ComputerName $Target Win32_LogicalDisk
  $MyReport += Get-CustomHeader "2" "Logical Disk Configuration"
   $LogicalDrives = @()
   Foreach ($LDrive in ($Disks | Where {$_.DriveType -eq 3})){
    $Details = "" | Select "Drive Letter", Label, "File System", "Disk Size (GB)", "Disk Free Space", "% Free Space"
    $Details."Drive Letter" = $LDrive.DeviceID
    $Details.Label = $LDrive.VolumeName
    $Details."File System" = $LDrive.FileSystem
    $Details."Disk Size (GB)" = [math]::round(($LDrive.size / 1GB))
    $Details."Disk Free Space" = [math]::round(($LDrive.FreeSpace / 1GB))
    $Details."% Free Space" = Get-Ink ([Math]::Round(($LDrive.FreeSpace /1GB) / ($LDrive.Size / 1GB) * 100))
    $LogicalDrives += $Details
   $MyReport += Get-HTMLTable ($LogicalDrives)
  $MyReport += Get-CustomHeaderClose
  if ($exServer.ServerRole -like "*ClientAccess*")
  {$MyReport += Get-CustomHeader "2" "OWA Connectivity"
   Write-Host "..performing OWA connectivity test"
   $colOWAResults = Test-OwaConnectivity -ClientAccessServer $Target
   $MyReport += Get-HTMLTable ($colOWAResults | select MailboxServer, $hotLink, Scenario, $colourResult, $latencyMS, Error)
   $MyReport += Get-CustomHeaderClose
Write-Host "..getting queue details"
  if ($exServer.ServerRole -like "*HubTransport*")
  $MyReport += Get-CustomHeader "2" "Queue Information"
  $colQs = Get-Queue -server $Target
  $MyReport += Get-HTMLTable ($colQs | Select-Object NextHopDomain, $colourStatus, MessageCount, NextRetryTime)
  $MyReport += Get-CustomHeaderClose
  Write-Host "..getting mailbox database information"
  $spaceLog=[System.Diagnostics.EventLog]::GetEventLogs($target) | where {($_.LogDisplayName -eq "Application")}
  $db = @{Name="database";Expression={$_.ReplacementStrings[1]}}
  $freeMB = @{Name="MB";Expression={[int]$_.ReplacementStrings[0]}}
  $whiteSpace = $spaceLog.entries | where {($_.TimeWritten -ge $now.AddDays(-1))} | where {($_.EventID -eq "1221")} | select $db,$freeMB
  $ws = @{Name="White Space";expression={}}
  if ($exServer.ServerRole -like "*Mailbox*")
   $MyReport += Get-CustomHeader "2" "Mailbox Stores"
   $colMailboxStores = Get-MailboxDatabase -Server $Target -Status | Sort-Object Name
   $storeTable = @()
   Foreach ($objMailboxStore in $colMailboxStores)
    [string]$totalUsers = (get-mailbox -database $objMailboxStore).count
    [string]$empty = $totalUsers.Length -eq 0
    if ($empty -eq 'True')
     [string]$totalUsers = "0"
    $storeDetails = "" | Select Name, Mounted, "Total Users", "White Space", LastFullBackup
    $storeDetails.Name = $objMailboxStore.Name
    $storeDetails.Mounted = Get-Ink ($objMailboxStore.Mounted)
    $storeDetails."Total Users" = $totalUsers
    $storeDetails."White Space" = (($whitespace | where {$_.database -match $objMailboxStore.Name} | select -last 1).mb)
    $storeDetails.LastFullBackup = $objMailboxStore.LastFullBackup
    $storeTable += $storeDetails
    $MyReport += Get-HTMLTable ($storeTable)
   $MyReport += Get-CustomHeaderClose
   $MyReport += Get-CustomHeader "2" "MAPI Connectivity"
   Write-Host "..performing MAPI connectivity test"
   $colMAPIResults = Test-MAPIConnectivity -Server $Target
    $MyReport += Get-HTMLTable ($colMAPIResults | select Database, $newResult, $latencyMS, Error)
   $MyReport += Get-CustomHeaderClose
   $MyReport += Get-CustomHeader "2" "Mailflow Test"
   Write-Host "..performing Mailflow test"
   $colMailflowResults = Test-Mailflow -Server $Target
    $MyReport += Get-HTMLTable ($colMailflowResults | select TestMailflowResult, $MessageLatencyTime)
   $MyReport += Get-CustomHeaderClose
  Write-Host "..getting Exchange services"
  $ListOfServices = (gwmi -computer $Target -query "select * from win32_service where Name like 'MSExchange%' or Name like 'IIS%' or Name like 'SMTP%' or Name like 'POP%' or Name like 'W3SVC%'")
  $MyReport += Get-CustomHeader "2" "Exchange Services"
   $Services = @()
   Foreach ($Service in $ListOfServices){
    $Details = "" | Select Name,Account,"Start Mode",State,"Expected State"
    $Details.Name = $Service.Caption
    $Details.Account = $Service.Startname
    $Details."Start Mode" = $Service.StartMode
    If ($Service.StartMode -eq "Auto")
      if ($Service.State -eq "Stopped")
       $Details.State = $Service.State
       $Details."Expected State" = Get-Ink ("Unexpected")
     If ($Service.StartMode -eq "Auto")
      if ($Service.State -eq "Running")
       $Details.State = $Service.State
       $Details."Expected State" = Get-Ink ("OK")
     If ($Service.StartMode -eq "Disabled")
      If ($Service.State -eq "Running")
       $Details.State = $Service.State
       $Details."Expected State" = Get-Ink ("Unexpected")
     If ($Service.StartMode -eq "Disabled")
      if ($Service.State -eq "Stopped")
       $Details.State = $Service.State
       $Details."Expected State" = Get-Ink ("OK")
     If ($Service.StartMode -eq "Manual")
      $Details.State = $Service.State
      $Details."Expected State" = Get-Ink ("OK")
     If ($Service.State -eq "Paused")
      $Details.State = $Service.State
      $Details."Expected State" = Get-Ink ("OK")
    $Services += $Details
    $MyReport += Get-HTMLTable ($Services)
   $MyReport += Get-CustomHeaderClose
    $eventLogs=[System.Diagnostics.EventLog]::GetEventLogs($Target) | where {($_.LogDisplayName -eq "Application") -OR ($_.LogDisplayName -eq "System")}
    $warningEvents = @()
    $errorEvents = @()
    $LogSettings = @()
$MyReport += Get-CustomHTMLClose
$fullReport += $MyReport
$MyReport = $null
$Date = Get-Date
$Filename = ".\" + "Exchange_Health" + "_" + $date.Hour + $date.Minute + "_" + $Date.Day + "-" + $Date.Month + "-" + $Date.Year + ".htm"
$fullReport | out-file -encoding ASCII -filepath $Filename
Write "Audit saved as $Filename"
Invoke-Item $Filename

please refer to my scripts below, it should get you started.
http://www.myexchangeworld.com/2010/03/powershell-disk-space-html-email-report/
http://www.myexchangeworld.com/2010/07/powershell-script-to-monitor-exchange-server-2010-services-email-report/
you can customsise this to your needs and add relevant information.
cheers
thiyagu
Thiyagu | MCTS/MCITP - Exchange 2007 | MCSE 2003[Messaging] | http://www.myExchangeWorld.com. This posting is provided "AS IS" with no warranties, and confers no rights.

1:N Replication Health Check

Hello,
When we run the check of 1:N Replication Health Check We are getting the following:
We cant replicate the tables mentioned in this report.
How should we proceed to fix this issue?
Thanks,
Amir

Hi Roy,
look at this note. it describes how to setup 1:n once you already created the config without "multiple usage" flagged.
Best,
Tobias
SAP Note 1898479:
SLT replication: Redefinition of existing DB triggers

Check condition on sub total line of ALV list

Hi All ,
Is it possible to check condition on the value of subtotal line in ALV list ,
I,e If the value of subtotal line is say greator than 100 I need to change the color of that line or change the text on the subtotal line .
I know how to change the subtotal text but i want to change with respect to value of the subtotal ,
Any input if this can be achieved will be great .
Thanks in adv .
Vinay
Edited by: vinay kolla on Jul 29, 2009 4:43 AM

Hi,
I donu2019t think there is any direct way to check the subtotal value in LIST display, try the following logic.
1. Use the event BEFORE_LINE_OUTPUT to check the subtotal value and accordingly change the text or colour of the line.
2. To use events in ALV, first get the events into a table through the FM REUSE_ALV_EVENTS_GET as shown
     CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
      EXPORTING
      i_list_type = 0
     IMPORTING
      et_events   = z_i_events.
SORT z_i_events BY name.
CLEAR z_wa_events.
READ TABLE z_i_events WITH KEY name = slis_ev_before_line_output
                        INTO z_wa_events BINARY SEARCH.
IF sy-subrc = 0.
    MOVE 'BEFORE_LINE_OUTPUTu2019 TO z_wa_events-form.
    MODIFY z_i_events FROM z_wa_events INDEX sy-tabix.
ENDIF.
3. Create a form with the name BEFORE_LINE_OUTPUT and do the coding to check the subtotals there.
Form BEFORE_LINE_OUTPUT USING RS_LINEINFO TYPE SLIS_LINEINFO.
*The structure RS_LINEINFO will have u2018Xu2019 in the field rs_lineinfo-subtot for subtotals.
If RS_LINEINFO-SUBTOT = u2018Xu2019.
*Here try to find the totals by looping at your final internal table till rs_lineinfo-tabindex.
*Then based on this u can give the colour to the line.
*I think there is no other way to check the subtotal value.
Endif.
Endform.
Edited by: venkatesh PH on Jul 29, 2009 5:31 AM

Check condition in J1IIN Transaction

Dear All,
I am creating Excise Invoice through J1IIN transaction against a Billing Document. Sometimes user unknowingly change the Posting Date in J1IIN. So I want that Posting Date in J1IIN must be equal to the Billing Date of Reference Billing Document.
So please tell if something is possible at Customization Level or not. If it is not possible then tell can it be done with ABAP (Some Userexit or like that) or not.
Please reply asap.
Regards,
Vishal

Hi Ankur,
Can you please confirm whether I need to write this Check condition in FM 'J_1I7_USEREXIT_EXCISE_BEF_SAVE'?
As it is most important transaction, so I need to take great care in this matter.
Regards,
Vishal

How to update Ztable from Excel file and how to check conditions ,

HI this uday,
pls help me how can i update Ztable from Excel file and how to check conditions .
regards
uday
Moderator message: please (re)search yourself before asking.
Edited by: Thomas Zloch on Jul 13, 2010 12:00 PM

Hi
Use Fm : ALSM_EXCEL_TO_INTERNAL_TABLE.
L_INTERN : internal table with your fields .
make sure that the fields in the Excel should be formatted (as numeric , characher ) depending upon the data types .
LOOP AT L_INTERN INTO WA_LINTERN .
        MOVE WA_LINTERN-COL TO L_INDEX.
        ASSIGN COMPONENT L_INDEX OF STRUCTURE WA_INREC TO <FS> .
        IF SY-SUBRC = 0.
          MOVE WA_LINTERN-VALUE TO <FS>.
        ENDIF.
        AT END OF ROW .                                    "#EC *
          APPEND WA_INREC TO IT_DATA. "
          CLEAR WA_INREC.
        ENDAT.
     ENDLOOP.
Regards
Swapnil

In TOAD, Need to Enable DB Health check option

Hi,
I am using TOAD 10.1.1.8 DBA Suite.
As my TOAD DBA Suite, DB Health check option should be there under
Database -> Diagnose -> DB Health Check.
But its not showing this option.
Kindly guide me as How to enable DB Health check.
Expecting your valuable reply.
Thanks in advance,
Orahar.
Edited by: Orahar on Feb 10, 2010 3:06 PM

Sure.
As I didn't get any valuable response from TOAD Forum, I have posted here.
I hope, I will get the solution here at OTN.
Thanks.

How to health check time capsule disk

how to health check time capsule disk?
when doing time machine backuping and copying files into time capsule, it would take ages and very long time.. is the disk going to die soon?
is there anyway i can check the disk?
my time capsule is 2TB current model.
please help.
thank you.

Time Machine automatically checks the backups on the disk. It does a quick check (a few seconds) before every backup, and periodically (every month, I think) does a much more thorough check.
You can do that yourself, by holding the Alt/Option key while selecting the TM icon in your menubar, and selecting Verify Backups. That may take quite a while, if you have a lot of data. I'd recommend connecting via Ethernet, as it will still be slow, but 2-3 times faster than WIFI.

Turning Off The Alert - Notebook PC Battery Replacement Program Alert in Health Check.

I want to turn off the Notebook PC Battery Replacement Program Alert in Health Check. It continues to alert me for months now. This is driving me batty since I have checked it 3 times and it is not included in the recall! I have a HP Pavillion dv6000 running Windows Vista Home Premium Edition. Any help to turn this darn alert off permanently would be very helpful. Thanks.

Thank you to all who have read this post so far. Please continue to contact HP directly using the above information.
Matthew|Community Advocate | Best Buy® Corporate
Visit our Channel on
Private Message

Health Check on 11.5.9

Hi Friends,
I want to do Health check on my E-Business suite 11.5.9(both Database and Application) please suggest how to do?
Regards,
Arun

Hi,
Hi Arun,
You can refer the following ML doc,
[Oracle Application Object Library Best Practices: E-Business Suite Diagnostic Tests Health Check Test|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=471667.1]
Thanks,
Anchorage :)Do NOT use this document and install the script since it is for R12 (you are on 11.5.9).
Regards,
Hussein

Health Check condition

Similar Messages

Maybe you are looking for