Health Report for existing role in support and upgrade documentation

Hi Experts,
I am looking for create a report or using existing report/FM (if any) which will show new objects been thrown for a role with there SAP suggested values when we use PFCG expert mode merge option. I think this will be very helpful for support person to health check for roles and during upgrade in step 2C documentation people can save a hell lot of time. I do not have ABAP knowledge. Can anyone help me on this?
Regards,
Arpan Paik

Hi Julius,
I have been to that wiki before and one by you as well (regarding upgrade steps). For current upgrade I have also noticed that SU25 step2B is not only left with customer related changes only. Where USOBT_C/USOBX_C has same values as of USOBT/USOBX there update to customer table automatically happened in step2A. So 2B left with very less changes where customer prefer the standard way!!!
What I am looking for is actual authorization change delta. Step2C gives us only list of roles get affected. I am lookimg for what change actually can happen to a single piece of role due to upgrade.
I have followed below method.
1. Join table USOBT_CD and USOBT_C to see actual proposal for changed transaction and corresponding auth object. Here I had to perform few excel work to remove data repetation
2. Then take old data for roles from AGR_1251
3. Put together above 2 data and after proper sorting by object manually remove the data which SAP does by expert mode merge function.
Can this step be automated by some ABAP code? or function module?
Otto wrote :
If I start/ when I start and still remember this thread, I will update it
Please do so and thanks for sharing thoughts.
Regards,
Arpan Paik

Similar Messages

  • How to add Reports to existing Role (Urgent).

    Hi Experts,
    I am working in BI7.0 and there are no workbooks in our project.
    There is a Role with two reports. The Role has some users assigned to it.
    One of the Users wants to access two additional reports.
    How should I add those extra two reports to this Role on BW side? Do I have to do something like Publish to Role on the Query side in BEx Analyzer (Query Design Mode)...???
    Thanks in Advance.
    Best Regards,
    Chandu.

    One of the Users wants to access two additional reports?
    if this two reports are new workbooks,  then run the query and save the workbooks directly in the role.  if you dont have access to this role then save it in developer role and ask security team to add them in the user role.
    if this report /workbooks exist in the system and you dont have access to this roles,   then you need to ask secuirty team directly to add them in the user role.  ( give them the role in which this workbooks exist  and the target role where he need to add ,  and give them the transport number ) they will add the role and workbooks in the transpot and give it to you.
    Thanks

  • HT2589 On new Ipod touch 5 In billing info we put in card info and it comes back saying for assistance contact itunes support and won't let us continue.  What do we do so we can continue?

    On new Ipod touch 5th, in billing info we put in card info and it comes back saying "For assistance contact itunes support" and it wont let us continue. what do we do so we can continue?

    Do what it told you to do.
    Contact itunes support

  • "Support and upgrade utility" of Multicap/Ultiboard 9 not compatible with windows installer

    Yesterday I installed Multicap 9 and Ultiboard 9 on the new computer of my collegue. We haven't got a maintenance contract. It's possible to update Multicap 9 and Ultiboard 9 once after installing it on a new computer withou a maintenance contract. First the "Support and Upgrade Utility" wants to download and install a new version (1.0.36) of itself. When this update wants to start, I got a message of the Windows Installer that the msi is incompatible with the Windows Installer. The upgrade is cancelled after this message.
    I tried to solve the problem to update Windows XP Pro SP2 to SP3, but that doesn't make sense.
    How can I solve this problem?
    Is it possible to download the update of Multicap 9 and Ultiboad 9 without the "Support and Upgrade Utility"?
    With kind regards,
    Marco.

    Hello Marco,
    thank you for your post on our webforum. I noticed some problems with the Support and Upgrade utility in the past (only on some computers). I think it is best to provide you with a new installer; it is possible to place this on a FTP server, can you contact me for this?
    Best regards,
    Martijn S
    Applications Engineer
    NI Netherlands

  • RoboHelp Support and Upgrades Continued

    I work for a large gov't agency whose IT group has informed
    us that Robohelp will not be providing continued support and
    upgrades for the product RoboHelp...is this correct????? p.s. as a
    result I am being informed that staff should discontinue use of
    product..........if this is not true you may want to provide
    clarification.

    easirider,
    According to this thread from early July:
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=447&threadid=1167119&en terthread=y
    RoboHelp is apparently alive and well. Check it out and tell
    your bosses not to jump ship just yet. Also, I called Adobe Support
    after being told by a third party software vendor that maintenance
    contracts were NOT available. They were wrong too - the Adobe rep
    was more than happy to renew my contract (or set up a new one) with
    a credit card or a P.O.
    Jim

  • OIM Reports for BIP Role Membership

    The OIM BP04 Reports for BIP, the Role Membership report description states:
    "This report will display membership details of all the roles. The report will not show indirect memberships. Security model is not implemented in this report."
    Looks like the data model deliberately excluded indirect roles (or child tabled roles) from the Lookup.DBUM.Oracle.Roles (same for the Privileges Reports).
    Can anyone guide me through editing the Role Membership data model to INCLUDE the roles from the lookup table?
    I believe the Lookup.DBUM.Oracle.Roles have to get associated to the users recon'd from the DBUM Trusted Recon from the DBA_Users table first.
    Thanks for looking.

    The BP04 OIM roles reports targets OIM roles, not oracle or ad roles.
    To achieve those views, custom BIP reports that query the respective OIM tables where the AD and Oracle data exist are required.
    Thanks for looking.

  • XL Reporter Report for comparison of last month and current month sales

    Hi,
    Our management requires an MIS report for comparison of sales in revenue and in terms of units for the last and the current month todate.
    Is there a way to view this data for both the months together, without any user input?
    Best Regards
    Jyoti

    Jyoti,
    I'll try and explain the XLR Report you'd need for this.  This is isn't the best way to explain something like this, but I'll give it a shot.
    -  Put an expansion on Row 8 and choose all Items (*), click Apply
    -  In A8, put ItemCode
    -  In B8, put Item Name
    -  In C8, put Sales - A/R Row Total
    -  In D8,put Sales - A/R Row Total again
    -  Setup a Parameter
        -  Call it Period
        -  Dimension
        -  Financial Period
    -  In Column D, put a column Summary and click into Financial Period
        -  click the button to open the selection window
        -  click to the parameter tab
        -  select your parameter and click OK and click Apply
    -  In Column C, put a column Summary and click into Financial Period
        -  click the button to open the selection window
        -  click to the parameter tab
        -  in the bottom right corner, add a "-1"   it should look like this @Period-1
        -  click OK and click Apply
    -  In C7 and D7 - choose Financial Period Code from formula builder
                 (so you can see the period code at the column header)
    This will show sales by item in the current Period (column D) and previous Period (column C)
    Hope that helps and at least gets you going.  I can't guarantee those are perfect instructions from memory.
    Brad Windecker
    [Omega Business Solutions|http://www.omegagroup.com]

  • Report for POs pending Release (approval) and POs overdue (past deliv date)

    Hi All,
    In ME2N - std report for POs. How do I set the selection critieria in order to get the following information
    1. POs pending Approval (subject to Release Strategy)
    2. POs pending delivery from Vendor where the delivery date requested in the POs is past. (How does Selection parameter WE101 help in this report.? How to show how many days past requested delivery date in the PO?)
    Thanks in advance

    Dear,
    1. POs pending Approval (subject to Release Strategy) : -
    Enter ME2N, select Dynamic Selection.
    Here click on Purchasing Document Header,
    Double click on Release Indicator field and assign "X" ,
    Then souble click on Subject to release and also give "Yes" indicator then click on execute you get list of purchase order which is unrelease.
    2) POs pending delivery from Vendor: -
    Enter ME2N, Select selection parameter WE101,
    Here you can find list of pending purchase order, You can see document date or delivery date from change layout to find out how it is past.
    Regards,
    Mahesh Wagh

  • Report for date variances between delivery and goods receipt date

    dear guru ,
    i search a standard report for date variances between delivery date in the purchase order and the goods receipt date.
    Do you help me ?
    Thanks

    Hi,
    Use Report ME80FN and here check the delivery schedule option in output screen.

  • How can I have a collective AWR report for RAC database in 10gR2 and 11gR1?

    Plz correct me here
    awrrpt.sql takes the snapshot at the instance level and incase we have 5 instances we have to take 5 awr reports for a particular period.correct???
    If above is true ,any wayout to collect a single collective AWR report for RAC database which includes information on all the instances in Oracle 10g R2 or 11gR1 ?
    Thanks in advance
    Gagan

    I have never come across a way for this. though I can n't say it is not there.
    But I guess it may not be feasible too becuase as we know the current AWR report contains data which is specific for one instance.
    Various hit ratios, top events, instance effeciency reports.... what not ..
    It would be really nice to see something is a new format where it lists values from each instance in a single report.. I guess such a thing Does not exiist as of now.

  • SQVI Report for SAP CRM Product Hierarchy and its Product

    Hi
    How to create a SQVI report for generating a list for SAP CRM Product Hierarchy which should show the outputs->Level 1, level 2, level 3 and level 4 categories and its products?
    I tried COMM_Hierarchy table and Comm_product but not able to achieve this requirement.
    or Is there any chance of getting related tables so that I could try more for this requirement.
    In which table both product id and its category Id can be found?
    Pravin

    Thanks DJ
    Is there any possibility to get a report for product hierarchy in SQVI ?
    say in SAP CRM system, the product category is maintained in COMM_HIERARCHY as
    Parent category Id->
                                    Level2 Category Id->
                                                                     Level 3 Category Id->                                                                               
    Level 4 category Id ->                                                                               
    Product Id's
    (I understood the link between Level 4 category id and product id with your info.) but not able to achieve the requirement fully.
    Is there any possiblity to achive for generateing a report?

  • Table or report for customer, g/l account and chart of account together

    Hi All.
    I am looking for any table or report where one can see the followings;
    Chart of account and customer together
    or
    chart of account, g/l account and customer together
    or
    cutomer and g/l account
    I am aware of the all the FI table like KNB1, SKA1, SKAT ..and many others. But I failed to get if any of those tables helps to give all above informations together.
    Unless I am missing something.
    Thanks in advance.

    Hi,
    There many FI Reports available to check Customer & G/L Account combination
    1. FBL3N - G/L ACCOUNT LINE ITEM
    2. FBL5N - CUSTOMER LINE ITEM
    3. FBL1N - VENDOR LINE ITEM
    For Chart of Account / Customer and Chart of account /GL account combination you have to develop the Z Report
    For this you can pre pare by using logic of Revenue Account determination
    The table Name Revenue Account determination: C001
    Techincal information: C001-SAKN1
    Sit with your ABAP Programmer and explain your exact requirement he will prepare the table for you as for your requirement
    Best Regards,
    MH

  • Standard SAP report for variance analysis of SD and MM

    Dear All,
    I want the standard SAP report for the vendors and customer varaiance analysis for the posting done in MM and SD with the GL balance in FI .It should be same as the report we get from the transaction code MB5L.
    Thanks in advance
    Meruta

    HI,
    The 1AB library contains reports for variance analyses. This is an important report for Cost Center Accounting (CO-OM-CCA) supplied in the SAP R/3 System. Additional information for  report can be found in the documentation for the reports. Choose Extras->Documentation from the report itself.
    Hope I had been able to help you out. Please assign points.
    Rgds
    Manish

  • Standard report for LSO containing infotypes 1021 and 1036

    Hello,
    Is there a standard report which contains infotypes 1021 (Prices) and 1036 (Costs)?
    We have used 1036 to record group proces and; e.g. LSO_RHXKBRO2 doesn't contain 1036.
    ERP2005, standard version.
    Help is highly appreciated.
    BR,
    Pia

    Hi,
    As far as I know, there is no standard report in SAP for master data load using excel sheet. You have write a custom z-program with the help of BDC for basic actions or for individual infotypes upload you can use 'Fast Entry' for quickly uploading data for any perticular infoype using Tcode PA30.
    Hope this helps.
    Thanks,
    Sarika.

  • PFCG, derived roles, create inheritance relation for existing roles

    Dear reader,
    We have many roles that differ only in the organisational levels, but were not created using the Transaction Inheritance functionality.
    Because of the sheer number of these similar roles, making a change in a non-organisational field in these roles is quite laborious.
    Such a change is much easier when there is an inheritance relation between a template and all dependent roles.
    Is there a way to set up the inheritance relation between a template and it's dependent roles after their creation ?
    Kind Regards,
    John Hermans

    My own thinking what will happen if we combine so and so roles....
    I have a other basic question regarding the field values of a A.object.As we know the one particular A.object is related to so many T.codes.Eg:assigning just 1 tcode to a role which contains 5 A.objects(those 5.A.objects are related to so many different T.codes).If we generate the profile for the role it will bring up all the mandatory field values for that specific T.code which is added.Suppose if we assign some values in the fields which are blank(maintain) or even changing the standard values(01,02 standard but deleting those values and assigning 03,04).Will the user gets accesss for the maintained/changed field values ? The reason for asking is ,as we are deleting the mandatory field values of the tcode and assigning some other values which are standard values for some other Tcodes (which are not added in the menu)
    Pls excuse me if it confuses ....

Maybe you are looking for