HealthManagerObserverMonitor monitoring non-existant server.
Hi all,
I have recently removed two Exchange 2013 CU1 servers (running the Client Access role only). I removed them by uninstalling Exchange and then removing the computer object from Active Directory. No errors were reported during the uninstall, and Get-ExchangeServer
no longer shows the servers. After removing the two servers, I rebooted every other Exchange Server (all 2013 CU1) in the domain.
Despite removing these servers, it looks as though the Exchange Health Manager is still looking for them:
RunspaceId : 4dcb42d3-b09b-4bcd-8877-22809f6d53c0
Server : exmbx01
CurrentHealthSetState : NotApplicable
Name : HealthManagerObserverMonitor
TargetResource : EXCAS01.example.com
HealthSetName : RemoteMonitoring
HealthGroupName : ServiceComponents
AlertValue : Unhealthy
FirstAlertObservedTime : 04/02/2014 09:46:18
Description :
IsHaImpacting : False
RecurranceInterval : 0
DefinitionCreatedTime : 04/02/2014 10:18:29
HealthSetDescription :
ServerComponentName : None
LastTransitionTime : 04/02/2014 10:18:29
LastExecutionTime : 04/02/2014 10:40:43
LastExecutionResult : Succeeded
ResultId : 34859481
WorkItemId : 534
IsStale : False
Error :
Exception :
IsNotified : False
LastFailedProbeId : 107
LastFailedProbeResultId : 25184538
Identity : RemoteMonitoring\HealthManagerObserverMonitor\EXCAS01.example.com
IsValid : True
ObjectState : New
Has anybody else experience this?
Thanks,
Gavin
Hi,
Is there any update on this thread?
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support
Similar Messages
-
"Phantom Remnant" - How to remove a non-existing server from Snow Leopard
I have a very strange problem that I am sure has a very simple solution, but I cannot figure it out.
Previously, my network was centered on my Time Capsule, which, due to router settings, was at 192.168.1.1. However, since moving, the address has changed, but my Mac Pro continues to look for it as a server or device.
It presents itself any time there is a network or filesystem request of any sort. So anytime I click on Finder (or PathFinder), click on a folder, file, connect to a server, etc., I get a window that pops up saying:
Connection failed
The server "192.168.1.1" may not exist or it is unavailable at this time.
I cannot figure out where the Mac stores it's list of servers that it has used in the past. I have looked through all of my apps that cause this to happen, in their preferences, and I've searched for hours on Google to no avail. It does not happen when I am using a web browser, so I don't think it's looking for the server as a DNS service, but I am thinking it is looking for the Time Capsule as a disk server or something similar.
Does anyone have any ideas of where else to look? I am comfortable at any level of editing or command line usage. I have set up networking dozens of times on Linux/Windows boxes, but I've not touched the details on my Mac (never had to before ). Is there a way to "flush" the hosts SL thinks exist?
PS: My new network setup is kind of screwy, and my router to the internet is at 192.168.1.1 internally (and in /etc/resolv.conf), but it does not have a disk of any sort inside (that is accessible at least), but I still have the TC on an internal network with 10.0.1.1 as it's new address.
TIA
Message was edited by: ramzy.darwishThis may help go into the Utilities folder and lunch Keychain Access.
Make sure you click on login and make sure the category is All Items. Delete all the references to your previous network that appears on the right hand side. -
Non-existent Server in iFolder Admin
I've got an issue with a server listed in Admin that doesn't exist anymore. I have a Master Server and at one time had a slave oes2 server. The oes2 server was started up from scratch as an oes11 server using a different server name but the same ip address.
Now in iFolder Admin, I have listed my Master, the working oes11 server AND the oes2 server. I would just ignore this but I added a new user and it defaulted to the oes2 server and won't let me reprovision it.
How do I get rid of that server? Is it referenced in a config file on the master server? I don't see anything in iManager that references it. Could it be an LDAP entry? and if so, how do I get rid of it?
Thanks!Originally Posted by mattlong1
I've got an issue with a server listed in Admin that doesn't exist anymore. I have a Master Server and at one time had a slave oes2 server. The oes2 server was started up from scratch as an oes11 server using a different server name but the same ip address.
Now in iFolder Admin, I have listed my Master, the working oes11 server AND the oes2 server. I would just ignore this but I added a new user and it defaulted to the oes2 server and won't let me reprovision it.
How do I get rid of that server? Is it referenced in a config file on the master server? I don't see anything in iManager that references it. Could it be an LDAP entry? and if so, how do I get rid of it?
Thanks!
I did manage to reprovision that new user. I added a DNS entry for the old oes2 server name pointing to the IP address that I had reused and once that started to resolve (checked with ping) I went back into iFolder Admin and was able to move that new user to the Master iFolder Server.
I'm still wondering how I can get rid of that erroneous server though. -
Mac keeps trying to connect to a non-existing server
Title pretty much says it all. Some time ago I accessed a Windows-Share using my MacBookPro (10.6.1).
Since then an error message along the lines of "Connection failed. Can't connect to the server AFOREMENTIONEDWINDOWSSERVER."pops up irregularly. Sometimes every 5 seconds, sometimes once in a hour.
Things I tried:
Repairing permissions
deleting com.apple.finder.plist
loggin in with a different account - no problems then!
emptying the "recent servers" list in GoTo -> Connect to Server...
I'm kind of stumped at the moment, especially as I can't find any log-file entries for this error.
You guys got any additional ideas?Now it's getting screwy, and looks like some sort of corruption. I recently had a issue with one of my iMac's and it's network settings. All browsers were having problems going to some sites. I went through all the motions, including user account testing, reinstalling and updating SL, etc.
Ran Onyx and cleaned every cache setting known to Mac.
Finally determined problem happened when network location set to Static IP, but not when Location set for dynamic IP. Don't know why, but other computers were able to use the same static IP's fine. The problem machine was using a Static IP for many months, but I changed the IP number to another Static, it worked, then changed the IP number back to the original Static, it continued to work...
So, even though I reinstalled the OS, some sort of networking preference must have been reused in the new installation. Changing the setting reset it or caused a new preferences file to be built.
One thing, I cloned my drive and worked over the clone pretty well. You can get pretty drastic if you've got nothing to loose. With a clone you can mess with the system preferences the same way you did with the user prefs, without causing any new problems on your work drive. You could also play with setting up a new user account and importing parts of the old account to see if you can get a good working account without endangering your data. -
When I am out of my office using my laptop, upon launching Firefox, it displays all of the tabs from the previous session on the non-existent extra monitor which is set up as a screen extention for when I am in my office. All of the other programs that I park on the extra monitor (Outlook for example) display on the laptop's screen when the extra monitor is not attached. Is this a bug? Or, must I not save my open tabs when exiting Firefox if I am going to use the laptop w/o the monitor?
Thanks for your suggestion. I sort of came to that conclusion as I was typing the original question. However if there is anyone out there who has a solution that is not dependent on my remembering to do something before I exit Firefox, it will be welcomed.
-
Exchange Server 2013 SP1 - Readiness Check Failing - Detected Non-existent Exchange 2007 Servers
For development purposes, I needed to install Exchange Server 2013 in our environment. Our current environment includes a couple Domain Controllers, a Sharepoint Server, and a SQL Server. So, it's got a very simple topology. The one thing
our environment does NOT have are current Exchange servers.
During the "Prerequisite Analysis" phase of the install it complained that two servers, that I can find nowhere in our active directory domain, are running Exchange 2007. Obviously, this presents some unique problems. Perhaps as a test
many years ago, someone installed Exchange 2007 to "play" with, but we've never run Exchange for any length of time.
So, this is quite the conundrum, given the above does anyone have any suggestions as to a potential solution? Ideally, I'd like to be able to "lift the covers" and cleanup the references to the non-existent servers somehow, but ANY suggestions
for fixes are MUCH appreciated.
Cheers,
NateHere is the thing I would do (Only if I am not going to have any exchange 2007 ever in the environment).
On any of windows server 2008 download
Exchange 2010 SP3
Extract the file and run the below command:
Setup.com /ps
This will make Exchange 2013 install. Also Deleting Exchange Administrator Group wouldn't help as Setup will look for the information about schema into AD.
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
Scom monitoring non domain computers
hello experts
i have scom 2012 and want to monitor non domain computers (servers in dmz)
i have created new template in ca server then create new certificates for dmz server and scom rms server.
now i have connection between two servers but there is an authentication error.
hear are logs.
please help
log from dmz computer
Log Name: Operations Manager
Source: OpsMgr Connector
Date: 29/09/2014 10:54:51
Event ID: 20071
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: SRV-AB-WWW1.somebank.am
Description:
The OpsMgr Connector connected to scom.somebank.am
, but the connection was closed immediately without authentication taking place. The most likely cause of this error is a failure to authenticate either this agent or the server . Check the event log on the server and on the agent for events which
indicate a failure to authenticate.
Event Xml:
<Event xmlns="">
<System>
<Provider Name="OpsMgr Connector" />
<EventID Qualifiers="49152">20071</
EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-09-29T06:54:51.000000000Z" />
<EventRecordID>2163</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>SRV-AB-WWW1.somebank.am</Computer>
<Security />
</System>
<EventData>
<Data>scom.somebank.am</Data>
</EventData>
</Event>
scom rms computer
Log Name: Operations Manager
Source: OpsMgr Connector
Date: 29/09/2014 11:18:57
Event ID: 21010
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: SRV-SCOM1.somebank.local
Description:
The OpsMgr Connector negotiated the use of mutual authentication with 192.168.169.40:53552, but Active Directory is not available and no certificate is installed. A connection cannot be established.
Event Xml:
<Event xmlns="">
<System>
<Provider Name="OpsMgr Connector" />
<EventID Qualifiers="49152">21010</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-09-29T07:18:57.000000000Z" />
<EventRecordID>1269145</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>SRV-SCOM1.somebank.local</Computer>
<Security />
</System>
<EventData>
<Data>192.168.169.40:53552</Data>
</EventData>
</Event>
telnet to 5723 port from dmz server to scom rms server is okPS C:\Users\administrator.AMERIABANK> C:\Users\administrator.AMERIABANK\Desktop\1.ps1
This script will inspect Local Machine certificate
store and registry settings. This will take several seconds...
Script will check certificates to match the following requirements:
Subject equals computer FQDN
Certificate is time valid
Certificate has private key and it supposed for computer certificate
KeySpec is set to 1
Certificate Application Policies (in former EKU) contains both Server and Client Authentication
WARNING: OpsMgr Agent is already configured to work with certificate, but this certificate don't exist in
WARNING: LocalComputer store or not match all certificate requirements.
To resolve this issue, obtain new certificate from trusted Certification Authority
using the following instructions: http://en-us.sysadmins.lv/Lists/Posts/Post.aspx?ID=5
and install it by running the following command: MOMCertImport /Subject SRV-SCOM1.ameriabank.local -
Usage tracking problem : not started due to non-existent Usage Tracking tab
Hello,
I need some help after following the necessary steps to setup 'Usage Tracking'.
My table S_NQ_ACCT stays empty.
The structure in the rpd files looks like
* OBI Usage Tracking
Connection Pool
Usage Tracking Writer Connection Pool
Catalog
dbo
S_NQ_ACCT
My nqsconfig has the following entries related to usage tracking
# Usage Tracking Section
# Collect usage statistics on each logical query submitted to the
# server.
[ USAGE_TRACKING ]
ENABLE = YES;
DIRECT_INSERT = YES;
PHYSICAL_TABLE_NAME = "OBI Usage Tracking"."Catalog"."dbo"."S_NQ_ACCT";
CONNECTION_POOL = "OBI Usage Tracking"."Usage Tracking Writer Connection Pool" ;
BUFFER_SIZE = 10 MB ;
BUFFER_TIME_LIMIT_SECONDS = 5 ;
NUM_INSERT_THREADS = 5 ;
MAX_INSERTS_PER_TRANSACTION = 1 ;
When making queries on the Usage Tracking SA, I still receive the following error in the NQServer.log File
+[59049] Usage Tracking not started due to non-existent Usage Tracking table "<Database>"."<Catalog>"."<Schema>"."<Table>".+
What am I doing wrong??
Txs for your quick help on this!
Kr,
A.Can you post your entire NQSConfig.INI file?
According to the message guide (http://download.oracle.com/docs/cd/E12103_01/books/AnyMsg/AnyMsg_Messages.html#wp1007961) the error you're getting specifies the table that OBIEE is trying to use, so the fact that yours reports literally "<Database>"."<Catalog>"."<Schema>"."<Table>" makes me think maybe the wrong config is being picked up. Also your comment that using a file instead of DB doesn't work either. -
Unregistering a non-existing db
hi,
found two entries for the same database in the catalog
SQL> select dbid, dbinc_key, name from rc_database where name='PROD1';
DBID DBINC_KEY NAME
3817268314 45902 PROD1
3844414535 431892 PROD1
i have tried to unregister the non-existing dbid but only encountered this error:
RMAN> run
2> {
3> SET DBID 3817268314;
4> UNREGISTER DATABASE "PROD1" NOPROMPT;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01005: syntax error: found "identifier": expecting one of: "allocate, alter
, backup, beginline, blockrecover, catalog, change, copy, crosscheck, configure,
duplicate, debug, delete, execute, endinline, host, mount, open, plsql, recover
, release, replicate, report, restore, resync, }, set, setlimit, sql, switch, st
artup, shutdown, send, show, validate"
RMAN-01008: the bad identifier was: UNREGISTER
RMAN-01007: at line 4 column 1 file: standard input
would it be safe to simply delete this entry from the rc_database table?
thank you..1) Identify the database that you want to unregister. Run the following query from the recovery catalog using Server Manager or SQL*Plus (connected as the RMAN user):
SQL> select * from rc_database;
DB_KEY DBINC_KEY DBID NAME RESETLOGS_CHANGE# RESETLOGS
1 2 2498101982 TARGDB 1 15-JAN-04
105 106 2457750772 OIDDB 1 14-DEC-03
128 129 2351019032 OMSDB 1 15-JAN-04
301 302 2498937635 TARGDB 140831 25-JAN-042) Remove the backupsets that belong to the database that you want to unregister.
Find the backupsets of the database that you want to unregister.
list backupset of database;3) if possible, remove the backupsets that belongs only to the database you want to unregister.
RMAN> allocate channel for delete type 'sbt_tape';4) Unregister the database by executing the following procedure from the recovery catalog:
execute dbms_rcvcat.unregisterdatabase(db_key, db_id)
SQL> execute dbms_rcvcat.unregisterdatabase(1, 2498101982)
PL/SQL procedure successfully completed.
SQL> execute dbms_rcvcat.unregisterdatabase(105, 2457750772)
PL/SQL procedure successfully completed.
SQL> execute dbms_rcvcat.unregisterdatabase(128, 2351019032)
PL/SQL procedure successfully completed.
SQL> execute dbms_rcvcat.unregisterdatabase(301, 2498937635)
PL/SQL procedure successfully completed.Hope this will help... -
WLST crashed on getting non-existing attribute in runtime()
After downloading the latest WLST package (April 14th, 2005) from the dev2dev site, I'm experiencing WLST crashs after attempting to get an attribute on a non-existing object instead of seeing a normal syntax error message.
Before updating my jython.jar and wlst.jar for dev2dev:
wls:/dizzyworld/runtime/ServerRuntime/dizzy1/ApplicationRuntimes/dizzy1_mbeanlis
ter/ComponentRuntimes/dizzy1_dizzy1_mbeanlister_mbeanlister> get('SessionsOpenTo
talCount')
Traceback (innermost last):
File "<input>", line 1, in ?
File "<iostream>", line 191, in get
WLSTException: 'Error occured while performing get : AttributeNotFound Exception
while doing a getAttribute for attribute SessionsOpenTotalCount. Use dumpStack(
) to view the error stack trace'
After:
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x8072644
Function=[Unknown.]
Library=D:\bea\jdk142_05\jre\bin\client\jvm.dll
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Current Java thread:
at java.lang.Throwable.getStackTraceDepth(Native Method)
at java.lang.Throwable.getOurStackTrace(Throwable.java:588)
- locked <0x10462cf0> (a java.lang.Throwable)
at java.lang.Throwable.getStackTrace(Throwable.java:582)
at weblogic.utils.StackTraceUtils.getThrowableWithCause(StackTraceUtils.java:180)
at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:137)
at weblogic.management.internal.RemoteMBeanServerImpl_814_WLStub.getAttribute(Unknown Source)
at weblogic.management.scripting.BrowseHandler.handleRuntime(BrowseHandler.java:1596)
at weblogic.management.scripting.BrowseHandler.regularPush(BrowseHandler.java:981)
at weblogic.management.scripting.BrowseHandler.splitPush(BrowseHandler.java:139)
at weblogic.management.scripting.BrowseHandler.cd(BrowseHandler.java:1693)
at weblogic.management.scripting.BrowseHandler.cd(BrowseHandler.java:1683)
at weblogic.management.scripting.BrowseHandler.resetCD(BrowseHandler.java:1664)
at weblogic.management.scripting.BrowseHandler.splitPush(BrowseHandler.java:141)
at weblogic.management.scripting.BrowseHandler.cd(BrowseHandler.java:1693)
at weblogic.management.scripting.BrowseHandler.cd(BrowseHandler.java:1683)
at weblogic.management.scripting.BrowseHandler.resetCD(BrowseHandler.java:1664)
at weblogic.management.scripting.BrowseHandler.splitPush(BrowseHandler.java:141)
at weblogic.management.scripting.BrowseHandler.cd(BrowseHandler.java:1693)
at weblogic.management.scripting.BrowseHandler.cd(BrowseHandler.java:1683)
at weblogic.management.scripting.EditHandler.get(EditHandler.java:66)
at weblogic.management.scripting.EditHandler.get(EditHandler.java:57)
at weblogic.management.scripting.EditHandler.get(EditHandler.java:57)
at weblogic.management.scripting.EditHandler.get(EditHandler.java:57)
at weblogic.management.scripting.EditHandler.get(EditHandler.java:57)
Dynamic libraries:
0x00400000 - 0x0040B000 D:\bea\jdk142_05\bin\java.exe
0x77F80000 - 0x77FFD000 C:\WINNT\system32\ntdll.dll
0x7C2D0000 - 0x7C332000 C:\WINNT\system32\ADVAPI32.dll
0x7C570000 - 0x7C623000 C:\WINNT\system32\KERNEL32.DLL
0x77D30000 - 0x77DA1000 C:\WINNT\system32\RPCRT4.DLL
0x78000000 - 0x78045000 C:\WINNT\system32\MSVCRT.dll
0x08000000 - 0x08139000 D:\bea\jdk142_05\jre\bin\client\jvm.dll
0x77E10000 - 0x77E6F000 C:\WINNT\system32\USER32.dll
0x77F40000 - 0x77F7B000 C:\WINNT\system32\GDI32.dll
0x77570000 - 0x775A0000 C:\WINNT\system32\WINMM.dll
0x6BD00000 - 0x6BD0D000 C:\WINNT\system32\SYNCOR11.DLL
0x10000000 - 0x10007000 D:\bea\jdk142_05\jre\bin\hpi.dll
0x007C0000 - 0x007CE000 D:\bea\jdk142_05\jre\bin\verify.dll
0x007D0000 - 0x007E9000 D:\bea\jdk142_05\jre\bin\java.dll
0x007F0000 - 0x007FD000 D:\bea\jdk142_05\jre\bin\zip.dll
0x18BE0000 - 0x18BEF000 D:\bea\jdk142_05\jre\bin\net.dll
0x75030000 - 0x75044000 C:\WINNT\system32\WS2_32.dll
0x75020000 - 0x75028000 C:\WINNT\system32\WS2HELP.DLL
0x782C0000 - 0x782CC000 C:\WINNT\System32\rnr20.dll
0x77980000 - 0x779A4000 C:\WINNT\system32\DNSAPI.DLL
0x75050000 - 0x75058000 C:\WINNT\system32\WSOCK32.DLL
0x77340000 - 0x77353000 C:\WINNT\system32\iphlpapi.dll
0x77520000 - 0x77525000 C:\WINNT\system32\ICMP.DLL
0x77320000 - 0x77337000 C:\WINNT\system32\MPRAPI.DLL
0x75150000 - 0x7515F000 C:\WINNT\system32\SAMLIB.DLL
0x75170000 - 0x751BF000 C:\WINNT\system32\NETAPI32.DLL
0x7C340000 - 0x7C34F000 C:\WINNT\system32\Secur32.dll
0x77BF0000 - 0x77C01000 C:\WINNT\system32\NTDSAPI.dll
0x77950000 - 0x7797A000 C:\WINNT\system32\WLDAP32.DLL
0x751C0000 - 0x751C6000 C:\WINNT\system32\NETRAP.dll
0x77A50000 - 0x77B3F000 C:\WINNT\system32\OLE32.DLL
0x779B0000 - 0x77A4B000 C:\WINNT\system32\OLEAUT32.DLL
0x773B0000 - 0x773DF000 C:\WINNT\system32\ACTIVEDS.DLL
0x77380000 - 0x773A3000 C:\WINNT\system32\ADSLDPC.DLL
0x77830000 - 0x7783E000 C:\WINNT\system32\RTUTILS.DLL
0x77880000 - 0x7790E000 C:\WINNT\system32\SETUPAPI.DLL
0x7C0F0000 - 0x7C151000 C:\WINNT\system32\USERENV.DLL
0x774E0000 - 0x77513000 C:\WINNT\system32\RASAPI32.DLL
0x774C0000 - 0x774D1000 C:\WINNT\system32\RASMAN.DLL
0x77530000 - 0x77552000 C:\WINNT\system32\TAPI32.DLL
0x71710000 - 0x71794000 C:\WINNT\system32\COMCTL32.DLL
0x70A70000 - 0x70AD6000 C:\WINNT\system32\SHLWAPI.DLL
0x77360000 - 0x77379000 C:\WINNT\system32\DHCPCSVC.DLL
0x777E0000 - 0x777E8000 C:\WINNT\System32\winrnr.dll
0x777F0000 - 0x777F5000 C:\WINNT\system32\rasadhlp.dll
0x19070000 - 0x19075000 D:\bea\weblogic81\server\bin\stackdump.dll
0x74FD0000 - 0x74FEE000 C:\WINNT\system32\msafd.dll
0x75010000 - 0x75017000 C:\WINNT\System32\wshtcpip.dll
0x77920000 - 0x77943000 C:\WINNT\system32\imagehlp.dll
0x72A00000 - 0x72A2D000 C:\WINNT\system32\DBGHELP.dll
0x690A0000 - 0x690AB000 C:\WINNT\system32\PSAPI.DLL
Heap at VM Abort:
Heap
def new generation total 4544K, used 4428K [0x10010000, 0x104f0000, 0x104f0000)
eden space 4096K, 100% used [0x10010000, 0x10410000, 0x10410000)
from space 448K, 74% used [0x10410000, 0x10463190, 0x10480000)
to space 448K, 0% used [0x10480000, 0x10480000, 0x104f0000)
tenured generation total 60544K, used 60543K [0x104f0000, 0x14010000, 0x14010000)
the space 60544K, 99% used [0x104f0000, 0x1400ffc0, 0x14010000, 0x14010000)
compacting perm gen total 8960K, used 8801K [0x14010000, 0x148d0000, 0x18010000)
the space 8960K, 98% used [0x14010000, 0x148a8630, 0x148a8800, 0x148d0000)
Local Time = Tue Aug 09 11:22:51 2005
Elapsed Time = 133
# HotSpot Virtual Machine Error : EXCEPTION_ACCESS_VIOLATION
# Error ID : 4F530E43505002EF
# Please report this error at
# http://java.sun.com/cgi-bin/bugreport.cgi
# Java VM: Java HotSpot(TM) Client VM (1.4.2_05-b04 mixed mode)
Regards,
Zachary Slaybaugh
Sr. Application Administrator
Time Warner Cable, Inc.This has been fixed in the latest version of wlst. You can get it from
https://codesamples.projects.dev2dev.bea.com/servlets/Scarab/id/S13
Thanks,
-satya -
Cfmail "failto" not working with non-existent internal email addresses
We've hard-coded cfmail TO value in many places across many
applications, i.e.
<cfmail to="[email protected];[email protected];[email protected]"
...>
Suppose when one of the users (user1,user2, user3) left
company and his email address was removed from the MS Exchange
server, cfmail would fail saying
A problem occurred when attempting to deliver mail.This
exception was caused by: javax.mail.SendFailedException: Invalid
Addresses; nested exception is: class
javax.mail.SendFailedException:
550 5.1.1 User unknown
in the server exception log and cfmail wouldn't report the
error to the email address of "failto".
So I'm wondering if it's possible to have cfmail ignore the
bad one(s) and continue to send the email? Or is there anything I
should do with the Exchange server?
Advice is much appreciated.Thank you, Dan.
Sorry, what I meant by "non-existent" is not quite
straightforward. Let me explain this way:
I observed the problem only occurred to emails of our
company. For instance: our company's email address ends with
@abc.com.
my email address: [email protected]
my previous colleague's address: [email protected] (he's gone and
the email is invalid / deactivated now)
my client's email: [email protected] (used to be valid)
If I code this way:
<cfmail to="[email protected]" failto="[email protected]"...>
"failto" does work and I got the email.
but if these:
<cfmail to="[email protected]" failto="[email protected]"...>
<cfmail to="[email protected];[email protected]"
failto="[email protected]"...>
I never got emails reporting the failure but error lines in
the mail log and the exceptions log which read:
"Error","scheduler-3","01/28/09","11:55:32",,"Invalid
Addresses"
"Error","scheduler-3","01/28/09","11:55:32",,"Invalid
Addresses"
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 550 5.1.1 User
unknown
at
com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1196)
at
com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:584)
at coldfusion.mail.MailSpooler.deliver(MailSpooler.java:832)
at
coldfusion.mail.MailSpooler.sendMail(MailSpooler.java:731)
at
coldfusion.mail.MailSpooler.deliverStandard(MailSpooler.java:1021)
at coldfusion.mail.MailSpooler.run(MailSpooler.java:986)
at coldfusion.scheduling.ThreadPool.run(ThreadPool.java:201)
at
coldfusion.scheduling.WorkerThread.run(WorkerThread.java:71)
Caused by: com.sun.mail.smtp.SMTPAddressFailedException: 550
5.1.1 User unknown
at
com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1047)
... 7 more -
Non existing local user managed to RDP to windows 2012 target machine
Hi,
It seems the exact same issue as I see it here: http://social.technet.microsoft.com/Forums/en-US/91f09a4b-350f-47f8-814b-53b29d1a6306/windows-2012-rdp-login-credentials-are-not-used-on-remoteapp-connect-dialog-box?forum=winserverTS
But I couldn't see any real/final answer.
Can I get official response from MS about this issue?
When we use the RDWeb, we use a non existing user to connect to some target 2012 machine and it actually works... it connects me to the target.
How cab I eliminate it?
Tx,
shlomHi,
Thank you for posting in Windows Server Forum.
For the user which you don’t want to provide the access of Remote Desktop to target machine, you can apply GPO setting for that user. Need to apply “Deny logon through Remote Desktop Service” GPO policy and add that user under that policy. You can
find the policy under below mention path.
Windows Settings/Security Settings/Local Policies/User Rights Assignments
Hope it helps!
Thanks.
Dharmesh Solanki -
Registering Existing Server on new ODSEE 11.1.1.7 DSCC
The DSCC from 11.1.1.5 allowed you to register existing servers and gave you the option to add a new host and use a different port. I am running DSCC on one machine and would like to register and monitor all my servers from this one DSCC GUI. It makes it really easy to verify that all my servers are up and running by looking at the list of all my local and remote directory servers. I just installed 11.1.1.7 and went to register an existing server. It only defaults to the local host and port 3779 and you cannot change it or add a new remote host. Does this mean with 11.1.1.7, you can only create and register servers on the local host that DSCC is running? If there is a new way to do it, I could not find it in the documentation. Any help would be appreciated.
Multiple DSCC environment is possible.
I did it in this way:
1) Unzip the binaries on both HOST_A and HOST_B
2) Create the DSCC registry on HOST_A
3) Create the DSCC agent on HOST_A and register it on DSCC on HOST_A
4) Create the DSCC agent on HOST_B and register it on DSCC on HOST_A (use the -h option)
5) Start the agent on HOST_A
6) Start the agent on HOST_B
7) Create dscc7.war on HOST_A
8) Deploy DSCC on a WebContainer on HOST_A
9) Create the DSCC registry on HOST_B
10) Create the DSCC agent on HOST_B and register it on DSCC on HOST_B (it will use a different port)
11) Create the DSCC agent on HOST_A and register it on DSCC on HOST_B (use the -h option)
12) Start the new agent on HOST_A
13) Start the new agent on HOST_B
14) Create dscc7.war on HOST_B
15) Deploy DSCC on a WebContainer on HOST_B
My config looks like this:
HOST_A
bash-3.00# /opt/dsee7/bin/dsccreg list-agents
Enter DSCC administrator's password:
Hostname Port Certificate Type Owner Flags iPath Description
opensso-dev1 3997 undefined DSCC_AGENT root - /opt/dsee7/var/dcc/agent -
opensso-dev2 3997 undefined DSCC_AGENT root - /opt/dsee7/var/dcc/agent -
2 agent(s) displayed
bash-3.00#
HOST_B
bash-3.00# /opt/dsee7/bin/dsccreg list-agents
Enter DSCC administrator's password:
Hostname Port Certificate Type Owner Flags iPath Description
opensso-dev1 7995 undefined DSCC_AGENT root - /opt/dsee7/var/dcc/agent2 -
opensso-dev2 7995 undefined DSCC_AGENT root - /opt/dsee7/var/dcc/agent2 -
2 agent(s) displayed
bash-3.00# -
I had a test user that was removed. When it was removed, it was still listed as a delegate on someone's email. Now, whenever a Calendar invite is sent to the existing user, the sender receives an undeliverable message. The existing user does not receive
notification of a calendar event, but the event does show up in the calendar.Hi,
If the delegate user account or mailbox has been removed from domain or Exchange server, please also remove the delegate settings with this account.
If a user is set as a delegate for a manager, the meeting request which is send to the Manager would be forwarded to the delegate automatically and ask for approving in the delegate side.
Please do the following steps in the Manager’s Outlook client to remove the delegate settings for this non-existent delegate:
1. Open the Manager’s Outlook.
2. Click File > Account Settings > Delegate Access.
3. In the Delegate list, click the non-existent delegate, click Remove.
4. Click OK to save the settings.
Then check whether the issue persists.
Regards,
Winnie Liang
TechNet Community Support -
Hi All,
I'm currently using an 3 IPad 64GB WIFI/3G and Having a really annoying Calendar Sync Issue, 2 out of 3 are having the same exact problem, I'm not to even sure how it even happen BUT... perhaps maybe when i delete or make a change into the calender, it doesn't sync back properly
I sync lotus notes calender via the internet to my mail server at work, when I sync my calender, it shows non-existent entries out of no where, I check my current lotus calender, and when i compare it to my Ipad calender, there a few entries in the IPad that doesn't even exist in the Lotus Calender.
I deleted the calender and redid the sync, it doesn't go away, anyone has this sort of problem before?
It really bugs me when I know i need to check for meetings, but that meeting is really arranged since it has been deleted or moved....All calendar entries from my I-Pad, I-Mac, & PowerBook work, just not my I-Phone entries. Where do I set up my sync on the I-Phone
Maybe you are looking for
-
Nokia unlimited music into Lumia 520
I have quite large collection of music lead using nokia music unlimited service. After moving my music into Lumia 520 with windows phone application no of the music plays on the device. If I use nokia music player to move my music it will give error
-
I have an older HP Photosmart Camera ( M627 ) It is around 7 years old and compatable with Windows XP. I have Windows 7 and I am unable to view video taken with camera. I do have audio, but only a black square when trying to view as a video. I am a
-
Window Dreamweaver CS4 - Help (F1) Error
When I press the F1 for help from within Dreamweaver CS4, I'm taken to the following link: http://help.adobe.com/en_US/Dreamweaver/10.0_Using/--POSTPROCESS-INSERT-GOURL-- This link appears to be invalid or broken. How can we fix this? Thanks!
-
1. I want to do following: Select material_no from mara where material_type in (u2018XXXu2019, u2018YYYu2019, u2018ZZZu2019) Where material_no, mateial_type will re replaced by the actual field names. Is it possible to do that in OPEN SQL or do
-
Can no longer search SMS texts
After updating to ios 8, I can no longer search for SMS messages that were sent/received prior to the up date. Same issue with 8.0.2.