Heap corruption only when compiling with VS 2013

My co-worker can compile and run our program using MFC fine in VS 2010 on his computer, but when we run my version of the program compiled in VS 2013 on my computer, there is heap corruption.
Does anyone have an idea of what could cause this or an effective way to debug this error in VS 2013? I have looked into the memory tools, but the heap corruption does not appear to occur at the same address all the time. I've also tried to locate the build
tools for 2010, but I have not been able to get the MFC components to compile our program in 2013 with 2010 build tools.
Thank you sincerely!

Hi,
Here is a blog about Debugging Heap corruption with Application Verifier and Debugdiag.
http://blogs.msdn.com/b/lagdas/archive/2008/06/24/debugging-heap-corruption-with-application-verifier-and-debugdiag.aspx
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Data not visible in table o/p when compiled with webdynpro compiler

Hi,
I am using a Z BAPI to retrieve data from backend ECC6 server and show it using a VC application.
When I compile this VC application using FLASH(FLEX2), the data is shown in the table, whilst if the VC application is compiled using Webdynpro compiler, the data is not shown in the table.
The No. Of Rows parameter has been updated with 10.
Please suggest what can be done so that data is shown when compiled with Webdynpro compiler.
Regards,
Ranu

Hi Ranu,
WebDynpro Compiler only supports Webservices.
You can look at the below link to get into full details -
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/limitationsofWeb+Dynpro
Regards,
Vipin Vijayan.

Pragma error when compiling with SDK X

Hi,
I am trying to compile my plugin application (which compiled fine with the previous sdk) using the SDK X, but receive errors in CAVAlert.h on the exception handler construct DURING, HANDLER, END_HANDLER.
The errors are listed here:
Headers/API/CAVAlert.h:156:3: error: 'suppress' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: 'warning' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: '__pragma' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: expected ';' before 'jmp_buf'
Headers/API/CAVAlert.h:156:3: error: 'ASException' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: expected ')' before ':' token
Headers/API/CAVAlert.h:156:3: error: expected ';' before 'struct'
Headers/API/CAVAlert.h:162:3: error: request for member 'E_RETURNOutsideDURINGBlock' in 'gBadReturnCatcher', which is of non-class type 'int'
Headers/API/CAVAlert.h:162:3: error: expected ')' before ':' token
Headers/API/CAVAlert.h:162:3: error: expected ';' before 'int'
Headers/API/CAVAlert.h:165:3: error: 'ENDHANDLEROutsideHANDLER' was not declared in this scope
To compile against to SDK X all I did was:
1) Used PIMain.c from the SDK X API directory.
2) Changed ACRO_SDK_LEVEL=0x00090000 => ACRO_SDK_LEVEL=0x000A0000
3) Changed the include directories to point to the new SDK X directories
Is there another directive I must add to get the plugin to compile with SDK X?
My preprocessor list is as follows:
ACRO_SDK_LEVEL=0x000A0000
HAVE_W32API_H
PDMETADATA_HFT=1
PLUGIN=1
WIN32
WIN_ENV
WIN_PLATFORM
WXUSINGDLL
_CRT_SECURE_NO_DEPRECATE
_DEBUG
_WINDOWS
__GNUWIN32__
__WIN32__
__WXMSW__
Thank you,
Magda

Without seeing your code, I can't really help.
If you want help with your code, open a formal support ticket.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Tue, 6 Dec 2011 04:09:25 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Pragma error when compiling with SDK X
Pragma error when compiling with SDK X
created by magdakuit<http://forums.adobe.com/people/magdakuit> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4066378#4066378

Codepage problem when compiling with fastjavac

Hi,
I'm getting the following warnings when compiling with fastjavac:
fastjavac: warning: Can't find codepage for "Cp1250" encoding.
fastjavac: warning: Use default ANSI codepage.
2 warnings
How could I suppress these warnings?
Thanks in advance

I think you are posting it on the wrong Forum. This is for Forte 4GL not Forte for Java.

Why does iPad 3 4G constantly restart after 8.3 update only when docked with iMac?

Why does iPad 3 4G constantly restart after 8.3 update only when docked with iMac?

That question is impossible to answer without more information. What troubleshooting steps have you performed? Did you try using another cable? Did you try using another USB port on the Mac? Did you reboot the Mac and reset the iPad? Have you tired restoring the iPad?
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Use iTunes to restore your iPhone, iPad, or iPod to factory settings - Apple Support

-Xlint warning when compiling with command prompt.

1 of the method i write in the program has a compilation warning when compiling with command prompt. When i compile the codes with the application i used to write the program has no error at all. Below is my code:
private static ArrayList readNum(String NumFile)
ArrayList key = new ArrayList();
String keyAttributes = readInput(NumFile);
StringTokenizer stk = new StringTokenizer(keyAttributes);
while(stk.hasMoreTokens())
key.add(stk.nextToken());
return key;
When i javac the program with -X;int, this errror occured:
warning: [unchecked] unchecked call to add(E) as a member of the raw type java.util.ArrayList
key.add(stk.nextToken());
^
1 warning
Anyidea how to solve this problem? Thanks for the help.

A quick google for that message would have told you that you're not using generics and the compiler complains about that.
Google for "Java Generics" to find out what all the fuss is about.

Internal outlook client connectivity in exchange 2010 when coexist with exchange 2013

Hi all ,
on my side i would like to clarify few queries.
Say for instance i am coexisting exchange 2010 with exchange 2013 .Unfortunately if all of my exchange 2013 servers goes down .
Q1 .On that time will the internal outlook users having their mailboxes on exchange 2010 can be able to connect mailboxes without any issues ? In case if they face any issues what kind of issues will they be? Because why i am asking is we should have pointed
the autodiscover service to exchange 2013 during coexistence.
When an user closes and reopens the outlook after whole exchange 2013 environment failure ,outlook will first query the autodiscover service for the profile changes to get it updated on users outlook profile.In such case autodiscover service will not be
reachable and i wanted to know will that affects the internal client connectivity for outlook users having their mailboxes on exchange 2010.
Q2. Apart from outlook internal users connectivity ,what kind of exchange services(i.e owa,active sync,pop,external OA and imap) will get affected when whole exchange 2013 environment goes down during coexistence ?
I have read the below mentioned statement on this awesome blog but still i wanted to clarify with you all on my scenario.
http://blogs.technet.com/b/exchange/archive/2014/03/12/client-connectivity-in-an-exchange-2013-coexistence-environment.aspx<o:p></o:p>
Internal Outlook Connectivity
For internal Outlook clients using RPC/TCP connectivity whose mailboxes exist on Exchange 2010, they will still connect to the Exchange 2010 RPC Client Access array endpoint.
For internal Outlook clients using RPC/TCP connectivity whose mailboxes exist on Exchange 2007, they will still connect directly to the Exchange 2007 Mailbox server instance hosting the mailbox.
Please share me your suggestions and that would help me a lot .
Regards
S.Nithyanandham

Hi Winnie Liang ,
Thanks a lot for your reply.
Scenario 1 : for internal outlook connectivity
We have below settings for exchange 2010 autodiscover.
mail.domain.com - will be the namespace for internal autodiscover URI for all the exchange 2010 cas serves
We are going to have below settings for exchange 2013 autodiscover.
mail.domain.com - will be the namespace for internal autodiscover URI for all the exchange 2013 cas serves
During coexistence mail.domain.com will be pointed to exchange 2013 cas servers . I mean to say if we try to resolve the mail.domain.com it will get resolved in to the exchange 2013 cas servers.
So on such case if anything happened wrong to the new environment or else if entire environment goes down .Do we face any issues while outlook users connect to existing mailboxes in exchange 2010 ?
Because why i am asking is ,on the below mentioned article i have read all the autodiscover request will go via exchange 2013 cas servers during coexistence.That means all the existing mailboxes in exchange 2010 will also have to query exchange 2013 cas
servers for autodiscover request.During the whole exchange 2013 environemnt failure whenever the user tries to close and open outlook .Outlook will first queries the autodiscover service for any changes happened on that particular mailbox and it will try to
get it updated on user profile.
http://blogs.technet.com/b/exchange/archive/2014/03/12/client-connectivity-in-an-exchange-2013-coexistence-environment.aspx
Would it be possible to make the exchange 2010 mailbox users to query only the scp points which belongs to the exchange 2010 cas servers for autodiscover request ?
Scenario 2: For exchange services
mail.domain.com - will be the namespace for all the exchange 2010 services (i.e owa,activesync,external outlook anywhere,pop,imap)
mail.domain.com - will be the namespace for all the exchange 2013 services (i.e owa,activesync,external outlook anywhere,pop,imap)
What about the above services will it get affected during whole exchange 2013 environment failure ?
Note : We are not facing this issue , i hope everything goes well in my environment while doing coexistence i am just asking this question on my own interest?
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Kaffeine embedded crash fixed when compiled with libxcb support?

From kaffeine website:
Embedded Kaffeine crash fixed.
This long standing bug is now fixed in current svn ...
In order to make it possible, we have ported Kaffeine and xine to xcb (a thread-safe replacement for xlib).
You can give it a try right now:
1) install libxcb=>1.0
2) install current xine-lib cvs (it contains xcb based video output plugins: xshm and xv)
2) install current Kaffeine svn
Notes
a) Both xine-lib and Kaffeine have to be compiled with xcb support (autodetected, check configure results).
b) Kaffeine will still work with xlib based video out plugins if compiled without xcb (but then, no fix!)
From 0.8.4 changelog:
* xine-part: support for xcb. Requires libxcb 1.0 and xine-lib 1.1.5. Fixes several issues.
Any reason not to incorporate this? If it lives up to it's promises It could mean kde users only need ONE media player :-) (I have 2 installed just to get DVD menus and embedding in konqueror without crashing)
Any thoughts?
Cheers,
Steve.

I felt that the laptop was possibly overheating and that is why I started down the road to call "customer support", thinking that a fan went out or there was damage to hardware due to it over heating. And that road got me no where in a fast manner, and two "techs" telling me it was a software related issue and that I needed to reformat the laptop (twice) and re-install to factory settings. Even when I did this, it still had the issue and they again told me that it was software related when there was no software on the computer except for Windows 7. The only thing that customer support helped me with is the knowledge of next time I buy a laptop, but Dell or any other laptop besides a Toshiba. That is too bad.
Anyway, I tried to continue on with my thinking of a possible over heating issue, so I blew air into the vents and fins of the laptop. A lot of dust came out. I kept blowing air into the vents until no more dust came.
My wife had to re-install everything again to her laptop after I got the major items re-installed. She has been running it for the last day or so with no issues. We hope that this was the issue. I know she enjoys the laptop when it was running well.
I guess we will see how it goes.

Can't find library when compiled with debugging

Hi all,
Compiling this code segment cannot find a library when using -g
bash-3.2$ cat tester.cc
#include <iostream>
#include <string>
using namespace std ;
static void
myRoutine()
string str= "this is in routine" ;
string str3 ;
str3 = str.substr(11,7) ;
if(str.substr(0,4) == "this") cout << "Have a hit" << endl ;
cout << "this is str3 - " << str3 << endl ;
int main(int argc, char **argv)
string str = "this is a test" ;
string str1, str2 ;
str1 = str.substr(0,4) ;
str2 = str.substr(10,4) ;
cout << "this is str1 - " << str1 << endl ;
cout << "this is str2 - " << str2 << endl ;
myRoutine() ;
return 0 ;
bash-3.2$ CC -g -o tester tester.cc
bash-3.2$ ldd tester
     libCstd.so.1 =>     /usr/lib/libCstd.so.1
     libCstd.so.1 (SUNW_1.4.2) =>     (version not found)
     libCrun.so.1 =>     /usr/lib/libCrun.so.1
     libm.so.2 =>     /usr/lib/libm.so.2
     libc.so.1 =>     /usr/lib/libc.so.1
If I comment out:
if(str.substr(0,4) == "this") cout << "Have a hit" << endl ;
bash-3.2$ cat tester.cc
#include <iostream>
#include <string>
using namespace std ;
static void
myRoutine()
string str= "this is in routine" ;
string str3 ;
str3 = str.substr(11,7) ;
// if(str.substr(0,4) == "this") cout << "Have a hit" << endl ;
cout << "this is str3 - " << str3 << endl ;
int main(int argc, char **argv)
string str = "this is a test" ;
string str1, str2 ;
str1 = str.substr(0,4) ;
str2 = str.substr(10,4) ;
cout << "this is str1 - " << str1 << endl ;
cout << "this is str2 - " << str2 << endl ;
myRoutine() ;
return 0 ;
bash-3.2$ CC -g -o tester tester.cc
bash-3.2$ ldd tester
     libCstd.so.1 =>     /usr/lib/libCstd.so.1
     libCrun.so.1 =>     /usr/lib/libCrun.so.1
     libm.so.2 =>     /usr/lib/libm.so.2
     libc.so.1 =>     /usr/lib/libc.so.1
Or if I remove -g:
bash-3.2$ cat tester.cc
#include <iostream>
#include <string>
using namespace std ;
static void
myRoutine()
string str= "this is in routine" ;
string str3 ;
str3 = str.substr(11,7) ;
if(str.substr(0,4) == "this") cout << "Have a hit" << endl ;
cout << "this is str3 - " << str3 << endl ;
int main(int argc, char **argv)
string str = "this is a test" ;
string str1, str2 ;
str1 = str.substr(0,4) ;
str2 = str.substr(10,4) ;
cout << "this is str1 - " << str1 << endl ;
cout << "this is str2 - " << str2 << endl ;
myRoutine() ;
return 0 ;
bash-3.2$ CC -o tester tester.cc
bash-3.2$ ldd tester
     libCstd.so.1 =>     /usr/lib/libCstd.so.1
     libCrun.so.1 =>     /usr/lib/libCrun.so.1
     libm.so.2 =>     /usr/lib/libm.so.2
     libc.so.1 =>     /usr/lib/libc.so.1
then I can run successfully
Any thoughts or hints?
bash-3.2$ CC -V
CC: Sun Ceres C++ 5.10 SunOS_i386 2008/07/10
Usage: CC [ options ] files. Use 'CC -flags' for details
bash-3.2$ uname -a
SunOS alpha 5.11 snv_86 i86pc i386 i86pc
Thanks,
Jim

Ack! Please ignore my earlier posting. I did not play close enough attention to details in your post. I apologize for the confusion. Let me start over:
The Studio Express release you have contains a newer version of the C++ runtime library libCstd.so.1 than is available yet in Solaris patches. We bump the internal version number when we add new interfaces. The internal version number of the Studio Express library is SUNW_1.3.2. The version of the latest release Solaris patch is SUNW_1.3.1.
Some new string class operator functions are in version SUNW_1.3.2. I think these are also defined as inline functions in the compiler headers. When you compile with -g, inlining is disabled, and you create a dependency on library version SUNW_1.3.2. (Compiling with -g0 allows function inlining, and might resolve your problem, but read on.)
We have not released a libCstd.so.1 with internal version SUNW_1.4.2, so I don't understand how that version number could appear in an error message. Did you really see that version, or is it a transcription error? For now, let's assume it is a transcription error.
When you compile and link with CC, the program gets a runpath pointing into the compiler installation area. At program run time, the loader looks for libraries in directories listed in the runpath, with /lib and /usr/lib as last resort. The "ldd" command reports what the runtime loader will do regarding dependent libraries.
If the compiler is installed in /opt, a 32-bit program gets a runpath that includes /opt/SUNWspro/lib. In that directory in Sun Studio Express is a symbolic link that points to ../prod/usr/lib/libCstd.so.1, the library with version SUNW_1.3.2.
If you try this:
% /opt/SUNWspro/bin/CC hello.cc
% ldd a.out
you should see, among other things,
libCrun.so.1 => /opt/SUNWspro/lib/libCstd.so.1
(Depending on the OS version, you might see
libCrun.so.1 => /opt/SUNWspro/prod/usr/lib/libCstd.so.1 instead.)
But if ldd can't resolve the library, you probably have a corrupted Sun Studio Express installation. In that case, uninstall it, and reinstall from a fresh download.
If you run the program on a different computer where Sun Studio Express is not installed, the loader won't be able to find the right library version, and you will get "not found" results. I addressed this issue in another thread:
http://forums.sun.com/thread.jspa?threadID=5340163

Bug report: ube_ipa: internal error when compiling with -xO5

When compiling imlib2-1.1.2, one source file causes compilation to fail with the following error message:
ube_ipa: internal error
cc: ube_ipa failed for loader_tiff.c
The command which fails is (probably wrapped):
cc -DHAVE_CONFIG_H -I. -I. -I.. -I. -I.. -I../src -I../loaders -I../libltdl -I/usr/X11R6/include -I/usr/openwin/include -I/opt/csw/include -I/opt/csw/include -I/opt/csw/include -g -fast -xarch=386 -xstrconst -v -xildoff -xO5 -c loader_tiff.c -KPIC -DPIC -o .libs/loader_tiff.o
Changing -xO5 to -xO4 works around the problem. The source file in question is imlib2-1.1.2/loaders/loader_tiff.c
Patch 112756-10 has been applied, and doesn't correct the problem. GCC doesn't have any problem compiling the file.
A quick note to any Sun employees reading this: it took me 45 minutes to find somewhere to submit this bug report. Searching sun.com for "submit bug report" turned up many forum postings where people asked "Where do I submit bug reports?", a bug report form for Sun One Java Studio, and not much else. It might be in your interest to make submitting bugs easier.

Internal errors, such as the one you encountered, are generally considered compiler bugs. They indicate that the compiler reached an unexpected state and therefore bailed out. I opened bug 20703141: internal error: pic_relocs(): hh reltype? to investigate. I see the same error message emitted by the current Studio development release; I will update this thread if I find a work-around.
Thanks,
Mark

Printer driver hangs when printing with Office 2013/Windows 8 64 bit

Printer: HP Color LaserJet CM1312nfi
Printer Driver: V5.1 (up to date, downloaded from HP support website) or Generic V5.6
OS: Windows 8 Professional 64bit
When I try to print a certain Excel document with Excel 2013 and printer driver V5.1, the program hangs and needs to be terminated via task manager. This happens always with the same document, but not with all documents. The program hangs also when opening the print preview for the same document.
The same document prints fine with the generic printer driver V5.6 and with the driver that comes with Windows 8.
The same document prints fine with driver V5.1 under Windows 7 and Office 2010. The combination Windows 7/Office 2013 was not tested. The combination Windows 8/Office 2010 was also not tested.
When I try to print an empty document with Word 2013 and generic printer driver V5.6, the program hangs and needs to be terminated via task manager.
My conclusion is that the HP printer drivers have a problem with either Windows 8 or Office 2013 or a combination of both.
The printer driver that comes with Windows 8 and is automatically installed is useful as a temporary workaround, but it lacks certain options, e.g. manual duplex.
On request, I am ready to send the Excel document by e-mail for verification of the problem.
Any help or suggestions will be very much appreciated.
Thanks in advance,
Uli
This question was solved.
View Solution.

From what you describe you are having issues printing from MS Office. Have you had trouble printing from other resources on your computer (e.g. from the internet or another program)? The first thing I am going to suggest is that we start by uninstalling and reinstalling the printer from the resources available online.
First if you use a USB cord, make sure to remove it (this is important). Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3562006&lang=en&cc=us...
Install that and let me know the result!
Have a great day!

Error LNK2019 occurred when compiling with CS6 on Win

When i try to use GetMousePosition() in my code, i got bellowing link error when compiling in VS2010.
Is there any library i can include to resolve it?
error LNK2019: unresolved external symbol __imp__GetCursorPos@4 referenced in function "struct tagPOINT __cdecl GetMousePosition(void)" (?GetMousePosition@@YA?AUtagPOINT@@XZ)
Thanks,
Aidy

Steps to reproduce the problem:
1. New an empty project with name "test" using DollyXs on Windows;
2. In testActionComponent.cpp, modify DoAbout() to be
void testActionComponent::DoAbout()
GetMousePosition();
3. Build the project.
Then, we will get bellowing link error
1> Creating library ..\..\..\build\win\objD\test/test.lib and object ..\..\..\build\win\objD\test/test.exp
1>testActionComponent.obj : error LNK2019: unresolved external symbol __imp__GetCursorPos@4 referenced in function "private: void __thiscall testActionComponent::DoAbout(void)" (?DoAbout@testActionComponent@@AAEXXZ)
1>..\debug_cs6\test.sdk.pln : fatal error LNK1120: 1 unresolved externals
There is no such link error in the sdk sample BasicDragDrop.sdk.vcxproj, but i cannot find any special setting in its project property.
Any suggestion will be appreciated.
Thanks,
Aidy

Bad performance of PARI when compiling with GCC for SPARC 4.2.0

Hi,
I've compiled pari (2.3.3) with gcc 4.2.0 and with an old gcc 3.3.2 on a Sun Fire V240 and Solaris 10.
The performance of pari compiled with gcc 4.2.0 is terrible. I've tried it with '-O3 -fast' and without this flags with the same result.
First compiled with gcc 3.3.2 without any special CFLAGS and run make bench:
* Testing objets for gp-sta..TIME=4 for gp-dyn..TIME=4
* Testing analyz for gp-sta..TIME=82 for gp-dyn..TIME=80
* Testing number for gp-sta..TIME=63 for gp-dyn..TIME=62
* Testing polyser for gp-sta..TIME=19 for gp-dyn..TIME=19
* Testing linear for gp-sta..TIME=30 for gp-dyn..TIME=29
* Testing elliptic for gp-sta..TIME=50 for gp-dyn..TIME=51
* Testing sumiter for gp-sta..TIME=45 for gp-dyn..TIME=47
* Testing graph for gp-sta..TIME=25 for gp-dyn..TIME=25
* Testing program for gp-sta..TIME=94 for gp-dyn..TIME=94
* Testing trans for gp-sta..TIME=228 for gp-dyn..TIME=225
* Testing nfields for gp-sta..TIME=434 for gp-dyn..TIME=433
+++ Total bench for gp-sta is 726
+++ Total bench for gp-dyn is 722
Then compiled with gcc 4.2.0 again without any special flags and run make bench:
* Testing objets for gp-sta..TIME=4 for gp-dyn..TIME=4
* Testing analyz for gp-sta..TIME=82 for gp-dyn..TIME=83
* Testing number for gp-sta..TIME=62 for gp-dyn..TIME=65
* Testing polyser for gp-sta..TIME=19 for gp-dyn..TIME=19
* Testing linear for gp-sta..BUG [1686975] for gp-dyn..BUG [1608146]
* Testing elliptic for gp-sta..TIME=50 for gp-dyn..TIME=52
* Testing sumiter for gp-sta..TIME=51 for gp-dyn..TIME=50
* Testing graph for gp-sta..TIME=28 for gp-dyn..TIME=28
* Testing program for gp-sta..TIME=98 for gp-dyn..TIME=97
* Testing trans for gp-sta..BUG [613000] for gp-dyn..BUG [606558]
* Testing nfields for gp-sta..BUG [3648091] for gp-dyn..BUG [3716170]
+++ [BUG] Total bench for gp-sta is 3029987
+++ [BUG] Total bench for gp-dyn is 2958336
Do anybody know this problem or can tell me what the problem could be?
Thanks!!
Rainer W.

Here are the compiler options I used to compile it with gcc4.
C compiler is /usr/local/gcc4/gcc/bin/gcc -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer
Executable linker is /usr/local/gcc4/gcc/bin/gcc -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer
Dynamic Lib linker is /usr/local/gcc4/gcc/bin/gcc -shared -mimpure-text $(CFLAGS) $(DLCFLAGS) -Wl,-G,-h,$(LIBPARI_SONAME)
If I use the -fast option I get the same result may be a little bit worse.
Here are some compilation lines:
Making gp in Osolaris-sparcv9
make[2]: Entering directory `/no_backup/pari/pari-2.3.3/Osolaris-sparcv9'
File ../src/funclist not changed.
../config/genkernel ../src/kernel/sparcv8_micro/asm0-common.h ../src/kernel/sparcv8_micro/asm0.h > parilvl0.h
cat ../src/kernel/none/tune.h ../src/kernel/none/int.h ../src/kernel/none/level1.h > parilvl1.h
cat parilvl0.h parilvl1.h > pariinl.h
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -I../src/language -I/usr/local/include -o gp.o ../src/gp/gp.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -I../src/graph -o gp_init.o ../src/gp/gp_init.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -I../src/language -I/usr/local/include -o gp_rl.o ../src/gp/gp_rl.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -DDL_DFLT_NAME=NULL -o highlvl.o ../src/gp/highlvl.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o whatnow.o ../src/gp/whatnow.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -I/usr/openwin/include -o plotX.o ../src/graph/plotX.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o anal.o ../src/language/anal.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o compat.o ../src/language/compat.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o default.o ../src/language/default.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o errmsg.o ../src/language/errmsg.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o es.o ../src/language/es.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o init.o ../src/language/init.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o intnum.o ../src/language/intnum.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o members.o ../src/language/members.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o sumiter.o ../src/language/sumiter.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o aprcl.o ../src/modules/aprcl.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o elldata.o ../src/modules/elldata.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o elliptic.o ../src/modules/elliptic.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o galois.o ../src/modules/galois.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o groupid.o ../src/modules/groupid.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o kummer.o ../src/modules/kummer.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o mpqs.o ../src/modules/mpqs.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o nffactor.o ../src/modules/nffactor.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o part.o ../src/modules/part.c

Runtime exception with ADG when compiled with ANT

Hi,
We are using Advanced Data Grid in our project and it compiles and produces a correct SWF file when compiled using the licensed FlexBuilder. This work fine for the development environment, but for the testing and staging environments we use ANT to automate the build process of both Flex and Java components.
When the swf is built using ANT, we get a runtime exception when the page containing the ADG is accessed in web browser. The exception is
TypeError: Error #1007: Instantiation attempted on a non-constructor.
at mx.controls::AdvancedDataGridBaseEx/getSeparator()
at mx.controls::AdvancedDataGridBaseEx/createHeaderSeparators()
at mx.controls::AdvancedDataGrid/createHeaderSeparators()
at mx.controls::AdvancedDataGridBaseEx/drawSeparators()
at mx.controls::AdvancedDataGridBaseEx/updateDisplayList()
at mx.controls::AdvancedDataGrid/updateDisplayList()
at mx.controls.listClasses::AdvancedListBase/validateDisplayList()
at mx.managers::LayoutManager/validateDisplayList()
at mx.managers::LayoutManager/doPhasedInstantiation()
at Function/http://adobe.com/AS3/2006/builtin::apply()
at mx.core::UIComponent/callLaterDispatcher2()
at mx.core::UIComponent/callLaterDispatcher()
Can you please suggest me how to fix this error?
Thanks in advance.

On forums of slackware there was a reference towards the program "free" which is being executed from /usr/bin/free whereas the program on slcakware resides in /bin/free or vice versa. Creating a ymlink should solve the problem. Dunnow (yet) if that works
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Heather Connery ([email protected]):
I have installed Oracle 8.1.7 on Red Hat 6.2.
When I attempt to create a database using dbassist i get an exception during event dispatching:
java.lang.NumberFormatException 41%
at java.lang.RuntimeException.<init>(Compiled Code)
etc.......
Does anyone know if this is a JRE bug? Any ideas what could be wrong here?<HR></BLOCKQUOTE>
null

Bitmap pattern has seam ONLY when created with "Object → Pattern → Make"

I think I've encountered a bug with Adobe Illustrator CC 2014.
I'm trying to make a repeatable pattern out of a bitmap, which I downloaded from http://subtlepatterns.com
Most of the patterns I try, work correctly, but one in particular behaves strangely.
(This is the png in question: https://dl.dropboxusercontent.com/u/473648/pw_maze_black.png, Here is an example AI file that shows the problem: https://dl.dropboxusercontent.com/u/473648/Pattern%20Seam%20Example.ai)
When I create a pattern with the "Object → Pattern → Make" menu item and then apply it to a shape, I get hairline seams that appear in the pattern at various zoom levels. If I export the file with "Save for Web" to a PNG then the seam disappears, though if I use the plain "Export" feature to create a PNG the seams appear in the output file.
The strange thing is when I create a pattern from the above PNG by dragging it to the Pattern palette and use that pattern, the seams do not appear in any export files, or in the design window of AI.
Other patterns I've tried from subtlepatterns.com work correctly when created with the "Object → Pattern → Make" menu item.
Obviously I have a solution to this problem, but is there an explanation for the difference between creating the patterns with the two methods, or is it a bug?
Thanks,
Caleb Land

When dragging the pattern to the swatches panel works, just do it. You don't need the pattern editing mode for this one.

Heap corruption only when compiling with VS 2013

Similar Messages

Maybe you are looking for