Hear HDV Audio while logging?

I am not hearing the audio while loging from my GY-HD100U in final cut 5.03
How might one go about that?
I have a 24 channel firewire i/o that works fine while editing for playback but no sound while loging even though it captures sound just fine.
?????

Well, there is such a delay between when the picture is being displayed on my computer monitor and when the tape is playing that the audio monitored from the deck option is virtually useless.
I am also getting FCP chopping up long shots into little bits and leaving out important parts.
I understand that FCP has to make a new file with every start stop with the JVC short GOP MPEG-2 stream but why would it be chopping up continious video with continious time code?
I have tried giving the camera it's own firewire port (on a seperate pci card)
Capturing to a different disc and all to no avail.
So no audio monitoring while logging
No logging anyway as FCP is chopping the video up into unusable pieces.

Similar Messages

No audio while logging

I'm using the latest version of FCP. When I am in the log and capture mode I can't hear the audio. The meters are moving so I know the signal is coming through. After I capture the clip and put it in the time line the audio palys fine. I have tried this in different sequence and other projects with the same results. Any ideas on how to fix this?

Hi:
The Audio preview is off by default in the log & capture settings. You can turn it on if you want. Search for the Monitoring Video and Audio While Logging topic in the FCP User Manual.
When you say latest version of FCP you mean FCP6?
Hope that helps !
Alberto

Can't hear my audio while scrubbing the timeline any more.

Forum,
I used to be able to scrub the timeline as fast as I wanted and still be able to both hear and watch my audio meter in FCP. Not anymore though. I'm not sure what happened, but I can no longer do either of the two.
Any tips?
Thank you,
Trey Vollmer

No, sir.
I mean zooming into the whole monitor. Every single pixel gets bigger - that kind of zooming.
You know what I'm saying? Well I'm trying it now as I speak and it's working, so never mind. It seems to me my mouse just needed to be cleaned.
Thank again,
Trey

URGENT No audio when logging

I know there is a setting somewhere so I can hear audio when logging from my camera, but I can't find it! I have spent hours in the manual, online, searching help files and nothing!! Please help. I really need this info by tomorrow morning. I know there is some setting to click to allow me to hear my audio while logging.

I found the answer in another forum. Here is a link to the answer: http://www.geniusdv.com/weblog/archives/finalcut_pro_audio_videosettings.php
If you are using Final Cut Pro 4.5, there is a switch you need to turn on in order to hear audio in Final Cut Pro within the Capture Preset Editor. (This has since been fixed in Final Cut Pro 5.0 or higher).
Click on the link and follow the tutorial. Look for the the heading 'Turning on External Speaker while Capturing' It will show you how to adjust the capture preset editor.

No Audio during Log and Capture

Hello, I have FCP 6.0 and am unable to hear my audio during log and capture. I have this problem on all 5 G5 Macs that I have, and have tried different editing docks and cables. I have used FCP for more than 5 years and have never had this problem. iMovie has audio during capture, so I am convinced that there is a pre-set in FCP that I don't have checked properly, but I've been over them many times and still have no answer. I searched past forums and didn't really find anything helpful to me.
My pre-sets are set to DV NTSC 48kHz and the playback pre-sets are set to default. I can hear audio of my clips after I log and capture, but I still need to hear audio during importing. I'm more confused than anything. If anybody has had this problem before or any suggestions for me, I'm all ears.
Thanks.
John

... as Bogie says.
However... this is a non-feature that dates back to slower CPU days... yet, still with all the different formats and such I (ME!!) I believe it's still good practice to leave it off.
Devoting as much CPU work to the capture process lessens the chance for something to go wrong. You can easily monitor the audio directly out of the deck as needed.
Sure -- octo cores need 30 apps open just to get your money's worth and I'm sure you won't have any issues using an 8th of one to send audio thru itself while the other 7 and 7/8ths are used for capture... but who wants to risk it?
Not me... I'm to old to change my ways.
Blast you FCP v1.2.5 on a beige G3 with 7gig and 15gig hard drive -- you taught me well.
CaptM

Problem with audio while making a call

I have a model 9810,
I can hear no audio while making a call at all, however, while making the call if I press the speaker tab I can hear (as like a hands free made)
I do not use a head set or in car kit, I just use it as a handset.
All other audio is OK, I can hear the alerts as a call or text comes in, but as soon as I answer the call and place it near my ear I hear nothing
Can someone please help
Thank you

Hello,
Questionz wrote:
I am having the exact same problem, I am not sure why, but my ear speaker is not working. I tried resetting, removing the battery, but nothing seems to be working.. Putting the call on speaker works, bluetooth works, only my ear speaker is not working.
I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Questionz wrote:
I bought this from Blackberry store, is there any way I can give this in as warranty?
When you purchased, you should have received information as to how to seek support, warranty or otherwise.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Lost audio while shuttling ...

Hello All,
For some reason FCP seems to have a mind of its own and has disabled audio monitoring while I shuttle through footage.
At the moment I am only able to hear audio when I press the 'space bar' ie: while the video is running at normal speed. I don't seem to be able to manually shuttle/job (as known in tape language) and monitor the audio at the same time.
I need to hear the audio while I creep along the clip in order to make a god audio edit but I simply can't find the right box to check in User Prefs etc.
Any clues?
Thanks for your help and expertise.
sp

Highlight timeline and hit Shift + S,
you may have inadvertently turned off audio scrubbing.
G.

SETTING to hear AUDIO while CAPTURING?

Hi...
(another) silly settings question.
How can I hear audio while capturing from my HDV deck?
When capturing from a DV device (a camera), the 'preview' box enabled me to monitor the audio from the tape while either screening it or when capturing it.
I don't see that 'preview' box as an option in the HDV log and caputure window.
Although I'm capturing audio from the HDV source, I can't hear it while it's loading. It's a little annoying as I'd like to be able to hear the tape as a way to decide if it's even worth capturing.
Any ideas?
Thanks,
Mark

We're here all week, try the liver.
I've always been a believer in monitoring in the signal chain. Granted I don't work much with HDV-- but monitoring what is going into and out of the computer, rather than relying on the computer's built in audio seems to be the way to go. Then you know what's coming off the tape, and what's going back down to the tape.

Hearing audio while ingesting into FCP

Hello,
Question - did some reorganizing and now I can't hear audio while I'm ingesting but audio is being ingested. Also the VU meter quits moving during the ingest. Is there is a setting that I'm missing? I can hear the audio fine when it plays in the browser or on the timeline. Thanks for your help.

Search is your friend:
In the Log and Capture window the Clip Settings tab
right hand side, lower "Audio" pane. There should be a checkbox called "Preview" , make sure it is checked.
But why put a drag on your system? Also read your manual for some setups.
And search this forum.

I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

Hi, I have this exact same problem. I haven't been using an iRig, just a cheap USB-jack cable. I managed to do this with the first cable I bought, but since it broke I've been unable to find a replacement that allows me to hear the drums while recording. DId you manage to get over this issue? If so I would really like to know how. Thanks and best wishes.

Cant hear audio while capturing

Hi
When I capture video & audio, i cant hear the audio from my source. However, the audio is captured and embedded in the clip when i look at it after the capture.
Do i have to turn on some monitoring function of some sort maybe?
Im capturing with an Black Magic card via SDI Embedded Audio.
Maybe someone have a clue.
//Lukasz

We're here all week, try the liver.
I've always been a believer in monitoring in the signal chain. Granted I don't work much with HDV-- but monitoring what is going into and out of the computer, rather than relying on the computer's built in audio seems to be the way to go. Then you know what's coming off the tape, and what's going back down to the tape.

Hey ppl,my macbook is not booting and by that i mean u can hear the audio wave when its starting up,the screen goes white and then after a while there's a folder with a question mark in the middle of the screen...anyone,any ideea?!?

Hey ppl,my macbook is not booting and by that i mean u can hear the audio wave when its starting up,the screen goes white and then after a while there's a folder with a question mark in the middle of the screen...anyone,any ideea?!?Regards.

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the hard drive data is somehow corrupted.
Put your install DVD into the drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the optical drive.
Once it has finished booting and you are at the Install screen launch Disk Utility from the Utilities menu. Is your Hard Drive in the list on the left?
If it is then select the First Aid Tab run Repair Disk and if that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

How to hear audio while scrubbing for cue points?

There don't appear to be any video control functions in AME in the Export Options dialog. How can I play and pause the video? How can I insert cue points if I can't hear any audio?

You do all this while still in PP.

Hearing Audio While Scrolling W/ Keys (or rather, Not Hearing)

OK so I am not an audio engineer or audio anything. I have a very simple project I told someone I'd help them with because ... how different could STP and FCP controls be?
All I want to do is hear the audio on the track as I push the forward and/or backward keys. In my old radio class that was called "rocking the reels" thereby hearing the audio/speech at the rate you can mentally process where a splice should go. Does STP really not offer this simple feature? I've looked everywhere and it seems like this is the case! This is madness!
Forward arrow key lets you leisurely go forward at your own pace, and back arrow key goes back? You can hear the audio this way? Seriously it's not available?
I take full responsibility for this dumb question but as I said - I don't "do audio." I am a videographer.
Also probably doesn't help that I'm on some old STP 1.1 version does it? But seriously, who doesn't offer a reel rocker? I mean heck, even FCP has that!
Talk to me.
null
Message was edited by: macadamea

I don't think it's available exactly as you describe, but you can use the scrub tool, so that when you click/drag it scrubs the audio.
Arrow keys make sense in FCP, where you can only step at the frame level, but less so in STP, where you can edit at sample level, if you need to.

Hi. I use Adobe Acrobat XI pro to make a PDF ebook embedded with audio. It works really well on my computer-I can read the book and hear the auto play mp3. The problem is, when I send it to my customers, they have difficulty hearing the audio. A few of th

Hi. I use Adobe Acrobat XI pro to make a PDF ebook embedded with audio. It works really well on my computer-I can read the book and hear the auto play mp3. The problem is, when I send it to my customers, they have difficulty hearing the audio. A few of them say they have Flash player on their PC and somehow they still can't hear, some say their Google Chrome browser tells them they've already got one flash player while they try to download one. For me, I had to download two versions of Flash player to be able to access to the audio. I don't know what the problem is, is it because it's the latest version of Adobe Acrobat XI pro that people with older version of Adobe reader or flash player can't open it properly? Or is it something else? How can I make sure every customer with different system can access to my books? Hope to hear from you ASAP! Thank you very much.

And how are the customers accessing the PDFs?
What devices are they using?
What program or apps with versions are they using?
I this age of other then PDF eBooks formats and reader program and apss for computers and mobile devices for these formats I would look at creating the books in one or more of the eBook formats.
Google Chrome and FireFox both have their own version of a PDF reader plug-in and they are well known to be less capable than Adobe Reader. It is possible to configure these products to use Adobe Reader.

Hear HDV Audio while logging?

Similar Messages

Maybe you are looking for