Hearing audio for my Apple TV so it plays through my receiver?

I have installed and configured my ATV. However, I am new to (apple) ATV, but I would like to learn how to hook up my ATV so when I play through it would play through my surround sound system?
Thanks

Restart the Apple TV, computer and router.

Similar Messages

  • Can't hear audio for movies on 1st generation ATV

    Anybody know how to fix the audio while watching movies on first generation apple tv? On my apple tv, I can hear audio for music, music videos, youtube, internet radio and even movie previews! But..... when I pay for the rental download of a movie there is no audio - just visuals. I am connecting with hdmi. When I connect an apple tv 2nd generation to the same amp and tv, using same hdmi and even same power lead and same settings then there is no problem! Anybody know how I can get audio to work for movies for this?

    I would suspect that it have to do with surround 5.1 settings
    if you don't have such a speaker setup but have turned it on in appletv settings
    the audio would likely be playing in the speakers you don't have
    rather then the tv's speakers
    your own material is likely not 5.1 surround but stereo
    so there you dont get the problem

  • I want to update iCloud account with new apple id but don't know password for old apple id.  Plus can no longer receive email at old apple id.  How can I delete the current iCloud account on my iPhone if the previously stated conditions exist?

    I want to update iCloud account with new apple id but don't know password for old apple id.  Plus can no longer receive email at old apple id.  How can I delete the current iCloud account on my iPhone if the previously stated conditions exist?

    If the old ID is yours, and if it is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • I recently changed my password for my Apple ID and now I can't receive calls on my iPad or Mac.  All devices are signed on with the same iCloud account.  Anyone have the same issue?

    I recently changed my password for my Apple ID and now I can't receive calls on my iPad or Mac.  All devices are signed on with the same iCloud account.  Anyone have the same issue?

    Hello!
    On all of these devices, go to: Settings > iCloud and make sure they're updated with the new password. If you're talking about Macs, go to: "System Preferences > iCloud" too.

  • HT1454 Can't see ipod videos from 60GB ipod classic.  I have Apple USB/video cable running through Onkyo receiver into Samsung TV. Video & TV out settings seem correct-I can see album cover, but no video. Is it possible to get itunes music videos to play

    Can't see ipod videos from 60GB ipod classic.  I have Apple USB/video cable running through Onkyo receiver into Samsung TV. Video & TV out settings seem correct-I can see album cover, but no video. Is it possible to get itunes music videos to play or do I need to get new ipod.   It works on my iPad and iPhone, but not through iPod Classic.

    Are these music videos located under Videos on your iPod?  Do it play other regular movies (if you have any on the device)?
    B-rock

  • Why is music purchased on my iPod Touch and automatically downloaded on my pc asking for my apple id and not playing?

    I purchased music on my ipod touch.  The songs automatically downloaded on my pc.  Now when I click to play them on my pc, it asks for my apple id.  After I enter my id, it says my computer is already authorized, but still won't play the song?

    Does the iPod connect to other networks?
    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>GeneralReset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Apple TV won't play thru my receiver

    I recently purchased a Pioneer VSX-522-K AV receiver and I can't get my AppleTV (latest version) to play through it. The HDMI inputs on the receiver are: DVD, Satellite, Game and Blu-Ray.
    The satellite works fine, my DVD player works fine fhrough the video and audio inputs. I don't have a game console or a Blu-Ray player. My DVD player with doesn't have HDMI out so I have three open HDMI slots. Sadly I can't seem to get the HDMI output from the AppleTV to work with any of the open HDMI inputs on the amp.
    I've plugged the Apple TV into each one, switched this amp to that device and no luck. It seems bizarre to me that the HDMI form the AppleTV will only work directly into a tv.
    Any suggestions?
    Many thanks,
    David

    Optical Audio may be your answer.  I use HDMI to the TV which plays video and audio and optical audio to the sound bar.  I can use the sound bar independent of the TV being on.
    Regards
    Jules

  • I can play movies and hear audio for them from my library. My music however can't be played or even locate?

    Howdy all. Have got most recent iTunes for Windows.
    Have just started adding movies to my library. These play back with great audio just fine.
    My music however, keeps coming up with an error saying the songs can't be located, and do i want to browse my pc to find the location.
    Can anyone assist? I thought the same library caters for both music/video etc.?
    Thanks,
    JNovo

    Paragraphs were invented for a reason.
    Flinging a giant wall of text up is not conducive to receiving help.
    Posting email addresses is not smart.
    User to user forum-Apple is nit here.

  • Cannot hear audio for subclips playback in source monitor

    Hi,
    My editor has merged a bunch of video and multichannel audio on his computer and created merged clips and sub clips for me to look at. Now it's my turn to make selects from the merged subclips, but when I open the project on my computer the subclips don't play back with sound (however, the regular full merged clips play just fine). There clearly is audio attached to the subclips (i can see the waveforms) and the correct audio channels are turned on, but the no sound is played. However, when I drag these subclips into the timeline, the audio channels are all turned off -- I can turn the relevant channels on and then the audio plays in program monitor from the timeline!
    Since my editor didn't have this problem on his computer, I assume it has something to do with the settings on my premiere pro.
    Does anyone have any ideas?
    thanks

    I'm not sure if it would account for the exact problem you're encountering, but there is a known issue with subclips saved from merged clips. It involves the Media Start and End timecodes being improperly calculated. Even if this bug does not account for the particular issue you're reporting, I recommend not using subclips from merged clips for the time being. Two workarounds:
    Rather than saving subclips from your merged clips, insert each segment into a sequence for review.
    If you really want separated clips in the Project panel, make duplicates of the original merged clip and then set in/out points in each
    If the bug records are correct, this issue was introduced in CC7.2, so another option is to roll back to 7.1. In that light, I'm curious whether you and your editor are on the same version.

  • Can not hear audio for tv episode

    I have iTunes 8.0 and it was working fine, but I bought a tv episode today and when I go to play it i can't hear any sound. I can hear my other tv shows but this one episode does not work.
    any ideas on to what could be the problem

    Hi Brittany,
    With iTunes open, select the TV episode you purchased, then on your keyboard press Command + I. That will prompt the Get Info window. Click the Options tab and use the Volume slider to adjust the audio/equalizer. Click OK to close the window. See if that helps...
    Also, if you are viewing the TV episode directly in the iTunes window, make sure you have the volume slider located top left in that window to the right.
    Make sure the volume is set correctly on your MacBook or iMac... controls on your keyboard... typically the F1 and F2 keys.
    Carolyn

  • Help! cant hear audio for .mpg's all of a sudden??!?!

    the video plays, but no audio. ive tried multiple files, wmv's and avi's work fine. but the audio isnt playing for .mpg files in qt?!?!? HELP!

    Try the following:
    Repair permissions & restart................
    KB article - No sound from some applications, but system alert sounds play (Mac OS X 10.3, 10.4)
    Another trick: If you have GarageBand installed, open it and then quit.

  • Why does laptop stop the audio for a few seconds when I play a video then resume for the video?

    Hi I have a HP Pavilion G6 2288-ca with amd a10 vision processor. So I was playing some videos from youtube and the audio stoped and resumed a few seconds after.

    Flash is required for YouTube content.
    Open System Preferences > Flash Player then select the Advanced tab.
    Click Delete All under Browsing Data and Settings
    Not empty the Safari cache.
    From your Safari menu bar click Safari > Preferences then select the Advanced tab.
    Select:  Show Develop menu in menu bar
    Now click Develop from the menu bar. From the drop down menu click Empty Caches.
    Now try a video.

  • HI,,,,, i HAVE USED THE SITE CALLED OUTPERSONALS FOR SOMETIME BUT CANNOT CONNECT ANYMORE EVEN THROUGH EMAILS RECEIVED FROM THE SITE ,,, ANYBODY THERE HAVE SUGGESTIONS PLEASE ,,, THANK YOU ,,,

    used the site lots in the past but it now says its insecure site
    and wont connect me

    Hi Ken,
    Wow, I've logged into adobe and never seen your response until now.
    I need to make the forums more of a daily stop I guess.
    Thank you for your response, When I go to the Archives, it states I have none. In addition, previously when I'd tried to move items to the archive, they just disappeared  
    Currently my desktop is not connecting at all, Everytime I connect, it's states "We have now logged you out" and requests I login again.
    I have of course rebooted,
    Gone into taskmanager, killed all the relevant threads,  tried again to login through the desktop, no luck, I'll have to uninstall it, make sure the threads are killed, then reboot it and then reinstall it, but I've not had the time to do that.
    On another note, and just as a point of reference, myself, personally, I hate these "cloud" file repositories (not to be confused with adobe cloud services which I love) but the file repositories themselves imho, are a blackhole of resource usage when one doesn't/isn't using them,
    Is there a way we can use it more of a "ftp" sort of thing, when I want to I can  put files there?  There is no way to "Download" the repository, no way to download the folders.. only individual files and then it takes I think three different steps before the download starts.. I find this very inhibiting.  Just an fyi. for what it's worth.
    Please, feel free to contact me,
    I'm on g+ chat [email protected]

  • Can't hear audio in mac PE 9

    I can't hear audio in my sceneline or timeline when playing clips. Makes it really hard to edit!
    i capture video/audio from my mini-dv sony cam or from vhs through firewire gadget...
    i added an m4v file to the project, couldn't hear audio either
    the audio is there, because if i just trim off the ends and create a dvd it has audio....
    The problem is on my mac mini... i installed it on my i7 laptop and audio works just fine.
    i've checked all the audio settings on both machines and they are the same.
    both have vlc and perian installed
    just installed the 9.01 patch... no change
    does anyone know what might be causing this?
    thanks

    I've tried changing those to all possible combinations.... System Default, Built-in Output, etc. nothing helps.
    on the mini, if you have speakers plugged in, it shows "headphones" as the only output option
    i notice in the "audio output mapping" it shows headphones 1 and headphones 2
    that seems strange as there is only one set of headphones
    i checked my laptop settings ...there was nothing selected on my laptop in audio output mapping
    "nothing selected" was not an option on the mini... so i renamed my prefs file and started PE again
    then i had nothing selected in the audio output mapping... but it still didn't work
    i forgot to mention something.... if i click on the slider/trim thing, and just hold down the arrows on the keyboard to advance the video, it advances at super slow motion and i DO get audio... so i think i have preferences set right.
    any other ideas?

  • FLV file won't play vid and audio for more than 3 secs

    I tried to convert this FLV file to MOV using ffmpeg, and here the error i get
    /usr/bin/ffmpeg -i internetmarketing.co.at/be87.flv internetmarketing.co.at/be87.mov
    FFmpeg version SVN-rUNKNOWN, Copyright (c) 2000-2007 Fabrice Bellard, et al.
    configuration: --prefix=/usr --libdir=${prefix}/lib --shlibdir=${prefix}/lib --incdir=${prefix}/include/ffmpeg --enable-shared --enable-libmp3lame --enable-gpl --enable-libfaad --mandir=${prefix}/share/man --enable-libvorbis --enable-pthreads --enable-libfaac --enable-xvid --enable-libdts --enable-amr_nb --enable-amr_wb --enable-pp --enable-libogg --enable-libgsm --enable-x264 --enable-liba52 --enable-libtheora --extra-cflags=-Wall -g -fPIC -DPIC --cc=ccache cc --enable-swscaler
    libavutil version: 49.4.0
    libavcodec version: 51.40.2
    libavformat version: 51.11.0
    built on Feb 4 2008 14:49:27, gcc: 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)
    [flv @ 0x7fc0b4b41160]Unsupported audio codec (6)
    [flv @ 0x7fc0b4b41160]Unsupported audio codec (6)
    Seems stream 0 codec frame rate differs from container frame rate: 1000.00 (1000/1) -> 55.92 (671/12)
    Input #0, flv, from 'internetmarketing.co.at/be87.flv':
    Duration: 01:45:56.4, start: 0.000000, bitrate: N/A
    Stream #0.0: Video: flashsv, bgr24, 640x480, 55.92 fps(r)
    Stream #0.1: Audio: 0x0006, 22050 Hz, mono
    File 'internetmarketing.co.at/be87.mov' already exists. Overwrite ? [y/N] y
    Output #0, mov, to 'internetmarketing.co.at/be87.mov':
    Stream #0.0: Video: mpeg4, yuv420p, 640x480, q=2-31, 200 kb/s, 55.92 fps(c)
    Stream #0.1: Audio: aac, 22050 Hz, mono, 64 kb/s
    Stream mapping:
    Stream #0.0 -> #0.0
    Stream #0.1 -> #0.1
    Unsupported codec (id=0) for input stream #0.1
    [ps23240]$
    that's the error i get, and supposedly ffmpeg should be able to handle this conversion
    http://ubuntuforums.org/archive/index.php/t-431941.html
    ...so i have QT Pro, and it plays the vid and audio for 3 secs and then only plays video. I'd like to be able to use the vid and import it into iMovie. That's what I'm going for...
    ...suggestions

    It seems that I can't login to the developer forums. I'm in the university program and when I try to login to apples developer forums I'll always be redirected to the login screen.

Maybe you are looking for

  • How to return a message in a boolean method?

    I am looking to return a message other than true or false using a boolean method. Is that possible to do without displaying the true, or false? private boolean search(Node node, int id){           if (node == null)                return false;       

  • Drop Indexes from Data Object in DOE

    Hi,           I have created the index for data object by using Mobile Appli Attrib tab in DOE workbench. But now I need to remove it. Everytime I remove checkbox and index name and save it. Now I open the data object again index will be there,it wil

  • Why is the size of 1400 imported CD songs 10 GBS?

    We imported over 1400 songs from CDs through iTunes and the file size is over 10GBs and its slowing down my windows PC.  We didn't change any import settings and the reading I've done on-line is confusing.  How can we make the imported music smaller

  • Change Display In "Open" Dialog??

    Hi ... Brand new here. Hope you guys can point me in the right direction. I'm using Adobe 9. When I open a file, all the files in the directory are displayed in "List" mode. Is there a way to make the box display them in "Details" mode?? I understand

  • Video issues...

    Hello! I've exhausted my resources trying to work around a bug between HTML5 player and Firefox, and I was hoping you could help. My embedded videos, which primarily uses HTML5 player plays back extremely choppy with Firefox (when in full screen). I