Heating Issue in BlackBerry 9220

Hey, I took my BlackBerry 9220 few days back and configured my enterprise mail. Post activation of enterprise mails my handset start heating some time due to which my battery got down. Kindly suggest some way if I can use enterprise mails without heating. Thanks.

Hi,
I really don't think that the heating is anyway related to the activation of ur enterprise email...it might feel so cz the heating started after the activation only...actually, the issue is with the battery and the issue started at the same time when u activated ur email...had u not activated the mails at that time,then also the issue wud hve appeared.
I would suggest to replace the battery if thats still in guarantee(normally, BB batteries hve 6 month of warrenty)...that should solve the prob...
with regards
simply abhik...
Please click "Accept as Solution" if your issue has been solved and to give thanks/appreciation, click thumbs up...
For BB OS update: http://us.blackberry.com/software/smartphones/update.html
BB Simulators: http://us.blackberry.com/sites/developers/resources/simulators.html

Similar Messages

IQ826t Restart and Heating Issue

One thing I definitely do not like the HP's support especially when they will not allow us to buy a 7 Upgrade from Vista nor will they support something (even when I find their glitches and they admit after telling me it was just the OS).. On Repair work, I had to ship it out and this will be my 2-3 time to do repair on this PC in the past 3 years (and I have to wait a week for the repair to be done...)
Besides that, IQ826t, Win 7 Ultimate SP1
All Drivers are up to date with HP website (utilizing Win 7 64 bit drivers and Firmware is up to date). AVG update/scan (no issue - confirmed even rootkit).. Malwarebyte - Scan and no issue
Disk Cleanup, Disk Defragmentation done on a monthly and quarterly schedule
Biggest Issue:
I am getting a crash with Win 7 0x124 Stop Error Message (happens periodically and even after a reboot)
Never had this issue until May and the upgrade to Win 7 was done last year with SP1 update done on March (so it is not an issue with the OS as HP support personnel seems to think... I proved them the issue with Windows Update History, The Bluescreen error code on my error code reader).. This machine under warranty and I had issues with it constant (even in Vista)
They state that it is the OS.. Again, if that was the case, I would think it would happen right away like my Toshiba on SP1 upgrade... That was not the case in the matter. I have a firmware reset (default settings) and the issue persist..
The Error Code relates always HAL.dll or ntoskrnl.exe
One if hardware compatiblity and the other is an OS kernel exe file.. And this usually checking knowledge base relates to hardware failing due to 1) Compatibility (which HP website confirms is not the case) 2) OS corruption (which is not the case checking on safe mode and this happening STILL 3) Heat Issue (which I believe is the issue and was been documented on the Internet
What I am noticing is the unit is extremely HOT (vent is almost burning when it has been off and just turned on).. I wonder if the hardware pieces are literally melting to destruction since I can't just open it up (they state it will void my warranty)
The Symptoms before the Crash (happens any time.. Even right after a power up)
If you are playing audio or video, you will start to hear jitters and sound seems to echo itself .. Video would start to lag and become choppy.. Systems start to slow down and things seem to run very slow.. I have seen the power light on the PC start on but the touchscreen just go black (will not restart sometimes)..
Minor Issues (but could be related)
1) When running PC Hardware Diagnostic, they will come up with an error code in the past and that was warranted for a motherboard replacement (of course, they ship the box to the wrong location and I was in the middle of my wedding so I get to it now).. It was pertaining to PCI Express Status ICH9 PCI Express Root Port where it will generate an error code... Now, running the diagnostic... I will not get any error but PCI Express Root Port 3 & 5 do not show up on the diagnostic... Wouldn't that obvious show something that is a problem when there are 6 ports (which on the previous diagnostic that I can't grab past logs shows that). That is not warranted for a warranty work? Just a note, I got the fail test code (which was intermittent but keep happening and the tech support would not look at previous case.. Port 4 failed and a fatal device code)
2) Blu-Ray player will not run and their answer is that it is your Blu-Ray until they realize that I ran it on 3 different Blu-Ray player standalone, different Blu-Ray, and confirm DVD will work.. They still think it is a software issue until they can't deny my point when it will not read the Blu-Ray no matter what (they took control and confirmed it).. They believe the HP SmartDVD software was failing because of Win 7 and not Vista (even when I downgrade and confirm it works, I stated the software is the issue... Lone and behold, 2 months later they had an update that they refuse to admit I was RIGHT on the matter and done 15 hours of troubleshooting that they were wrong about)
3) Wireless Keyboard and Mouse lost connectivity even if the battery is not low... Just stop typing or omit letters.. This is considering the keyboard is literally in front of the touchscreen
4) Touchscreen is sensitive when it wants to be but won't in other... Constant issues there
This is why I have so much issue with support.. They seem to show that they will do anything to deny the issue.. Heck, I am a computer technian calling on the issue.. It ain't like I didn't troubleshoot on the matter... But they think we are all morons and when I prove them wrong, they will use any excuse to honor warranty... That is why it is amazing..

Look in your Settings > App Manager.
Tap Device Monitor.
Tap the Battery tab.
At the upper right, tap "Since Last Charge" to change to "Last 48 Hours".
What apps or processes are consuming the most battery power?
ALSO, in setting up your new Z30, are you syncing many contacts or calendar data from a connected email account?
Social accounts such as Facebook or Twitter?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Blackberry 9220

Dear sir,
My name is Sandeep Arora and i am using blackberry 9220.I complaint this phone in blackberry service centre three times but they doesn't solve this. I update my software from service centre. service centre employee said that this model is not available in company and company not provide this model. my IMEI no is **Removed**.I want to swipe my phone please do the needful.
Edit: IMEI removed. At no time should you provide any personal information to any other community member. Please review the Community Guidelines and Terms and Conditions of Use. for further information
Thanks.
sandeep

sandeep1769 wrote:
service centre employee said company is not provinding us this phone so you must complaint on this link.
I'm sorry, but you were given bad information. Refer:
http://supportforums.blackberry.com/t5/Social-Lounge/How-This-Site-and-Formal-Support-Work/td-p/2540...
As I said before, no one here has any standing in the matter.
sandeep1769 wrote:
.now i don't now who is lying.
Sadly, I cannot resolve that for you...no one here can resolve that for you. Except to tell you, as I did above, that them telling you to come here to this forum to seek formal help was not correct...whether it was a lie or something else, I cannot know. But that information was definitely not correct.
Cheers, and Good Luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BlackBerry 9220 all the keys are not working & camera working Automatically

Guys Please Help,
My BlackBerry 9220 all the keys are not working (except end button)& camera working Automatically, i tried to update from desktop manager but the update reaches to 100 % & stucks. I tried 5 time but still it is not updataing. I m fedup from this phone, please help
Regards,
Taj

Hi Taj151286
Welcome to BlackBerry Support Forums
Please run a Self Test on your Device to see if its an hardware issue , follow this Knowledge base :
KB16037 : Using the Self Test application on the BlackBerry smartphone.
If your device fails then you might have to look for warranty or repair options.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Blackberry 9220 won't start after os update

My blackberry 9220 was perfectly working for the past 8months, after finding out that there's a new update for os, i tried updating mine. I fell asleep while updating my os thy i didnt notice if the os was successfully updated bt wen i woke up at the middle of the night, my phobe won't start. When i tried charging it, the red led light lights up then the initial screen where you see the blackberry word and load bar below it starts bt only flashes and turns off. It keeps repeating. I tried going to a phone technician but they said they cannot reformat my phone because it doesn't turn on or completely turn on in the first place.. What should i do? Please help me.

Hi and Welcome to the Community!
You may need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Updating blackberry 9220 software fails now unable to open my device. HELP!

Hi! iIm trying to update my blackberry 9220 software however, while its updating, my computer doesnt recognize the device. i remove the usb cord then try to open my phone but just having an "App Eroor: 200" and an option to reset.. i click reset. then it just goes back to the app error.. what should i do?
Solved!
Go to Solution.

Hello yhayen03
Welcome to BlackBerry Support Forums
Please try this Knowledge Base to resolve your issue with this Error :
KB11320 : How to perform a clean reload of the BlackBerry Device software using BlackBerry desktop software for windows
I hope you already have a backup of your device , Or if you device allow first do a backup .
Additional Information can be found here :
KB30100 : "JVM 200" appears on the BlackBerry smartphone.
Try it and let us know if you feel any issue.
VIA | prince2012
http://supportforums.blackberry.com/t5/BlackBerry-Curve/error-app-200/m-p/2484385#M200531
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

My blackberry 9220 curve is getting auto reboot every time

My blackberry 9220 curve is getting auto reboot every time. I have updated software, delete third party application, but still facing the auto reboot issue.

Well, I don't agree with your conclusions, but I won't battle you. So, what would you like to try?
Given your decided diagnosis, the only thing I can think of is the "Bare Bones OS Reload Procedure" to attempt to narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
pkjha wrote:
I don't know why blackberry are not able to handle auto reboot issue. As i am seeing lots of people are facing auto reboot issue and did not get exact reason for this.
I don't either, but just in case, refer:
http://supportforums.blackberry.com/t5/Social-Lounge/How-This-Site-and-Formal-Support-Work/td-p/2540...
Hopefully, this information will be of use to you.
Cheers, and Good Luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

After several repairs, still having heating issue with MacBook Pro (mid '09)

EDIT: this post got removed the first time for not being constructive enough. I've now edited the post.
This is going to be a lengthy post, so bear with me.
2 months ago, I suddenly noticed my MacBook Pro (medio 2009, 15", 4GB RAM, GeForce 9400M) heating up a lot harder than usual. I'm familiar with the heating issues these laptops have, but this wasn't normal. Looking at iStat Pro, I saw my fans almost taking off like an airplane at 5700 rpm, while watching only a livestream on my browser. I know Shockwave Flash takes up quite a chunk of your CPU, but I had never encountered this problem beforehand.
The biggest problem wasn't just the heat or the fans, but the fact that my computer also started reacting rather slowly. Sometimes I'd even get beachballed, or the whole browser stopped responding for half a minute...
So I tried to see if gaming was still an option. Of course not. I had been playing League of Legends for several months without any issues. Whilst playing, I'd kick up my fans manually to about 4000 rpm, and they'd stay there throughout the whole game. Now, when I start up the game, it plays smoothly for the first 2 minutes. After the temperatures rise to a critical level, the fans start spinning up to 5700 rpm, and the whole game plays like a powerpoint presentation.
On a sidenote: it sort of 'lags' every 1-2 seconds, and sometimes, after a long period, the game acts somewhat normal again (20 mins). This game uses wine to run, which isn't the most optimal way. So I tried playing Team Fortress 2, too. Probably even worse results! (but again noticeable 1-2 second interval lags)
Before anyone starts screaming: "Don't use your Mac for gaming!" etc., I wish to point out that these two games had been running perfectly for the past few months/years. Something's definitely wrong.
After looking for some solutions myself, I decided to go to an authorized Apple Service in my city. A few days later, they told me my logic board was broken, and I had to pay almost 700 euros ($ 900-1000) to replace it. So I did. I got it back, but it wasn't fixed. Brought it back in. Got it back a week later: "Your new logic board we got from Apple was already broken, but we hadn't noticed. We put a new one in it. It's fixed." Again, same problem.
We're almost 2 months later and 700 euros poorer, still no result. I've brought it in about 6-7 times now, here's a list of what they've tried so far:
- In total 3 new logic boards
- New MagSafe (because they discovered it was giving too much power too my laptop)
- Fresh re-install
- Replaced RAM
- Checked fans etc. (they do this by default)
- A few tests which proved that it was repaired (but I have my doubts with these tests...)
They told me now that it's fixed, and they basically won't look into it anymore. I must contact Apple myself, if I wasn't satisfied. The tests they performed showed no signs of heating issues. (One of the tests was playing 4 1080p movies at the same time. When I watch a 1080p movie on Youtube, my laptop is taking off like a plane) They ran a stress test all night long, showing no temperatures above 98°C. I got it up to 105°C in a few minutes according to iStat Pro.
They advised me to install Mountain Lion, which would make the issues with "high-performance sites" go away. I haven't seen much improvement, though.
This whole experience has been quite frustrating, especially now that I'm gonna need my laptop for University again. Isn't there anything I can do? I've paid almost 700 euros and missed my laptop for 2 months, without any results.
I've got more information regarding the issues if needed, ask away. I'm getting desperate.
I've been browsing around the support communites, and found that a lot of people are having issues since they upgraded to OS X Lion. Could this be the case? Should I try downgrading to Snow Leopard?
I've also found a few topics on refreshing the cooling pasta on the heatsink. Would they have noticed any problems with this after replacing the Logic Board several times? Or should I check it myself? I'm not too keen on opening up my laptop myself...
Nick.

Thought of buying Parallels? Fusion?
Might want to see if this gets moved to the MacBook Pro forum.
I'd think Windows 8.1 is smart enough (what I use 90% time since the Dev Preview came out couple yrs ago it seems like) to find the driver.

Macbook Pro 13-inch, mid 2009. Heat Issues

Hi!
What can i do?
I have a macbook pro 13" from 2009.
The fans are always on 1999 RPM, they never go faster, not even when the computer reaches a temperature of 80° Celcius.
As soon as I go to youtube to watch a video, the temperature goes up alot, but the fans stays at 1999 RPM and they refuse to go up. So the computer just gets warmer and warmer.
So I downloaded a program called smcFanControl, and when i watch usually any video on youtube, the temperature goes up to around 64° Celcius with the fans running at around 3500 RPM.
I can forget about watching ANY HD 720p video on youtube, because then the computers temperature reaches at least 70° Celcius even with the fans running at 4000RPM.
I am SO sick of this heat issue.
What can i do?
The room I am in, isnt even warm. My sisters Sony Vaio is at 40° Celcius when watching the same HD 720p video.
And this problem doesnt only occur when I watch HD videos, i get it no matter what video I watch on youtube. Highly annoying.
Why cant my macbook pro control the fans automaticly? Is there any program that i can use so it controls the fans automaticly? Because I am SO tired of controlling the fans all the time, i need to control them when I go to youtube, when i go to expressen.se (Swedish news online), I need to control them when using videocall via skype, yeah almost all the time!
Does anyone have the same problem? Or any idea what to do? It doesnt even matter if I'm downstairs in the livingroom where its really cold, I cant watch videos on youtube without the temperature reaching sickingly 80°celcius, or 64°Celcius with the fan running faster, which I have to do manually by the way.
I would just love for my macbook to control them automaticly, I hate that i have to do it.
Please help.
I run Mac Os X 10.6.3 (Snow leopard), I have a 2,26 Ghz Macbook Pro 13 inch from mid 2009.
SMC-version 1.47f2
Please help,
Kind regards

Hi again PatrikK,
The temperature that SMCFanControl reports itself is the CPU A temperature diode one from what I can see. As a test I ran SMCFanControl alongside Marcel Bresink's excellent shareware program "Hardware Monitor" , which provides much more detailed information about temperatures , speeds, power demand, etc etc, than SMC is able to do, to test this and the CPU A temp diode was certainly the closest to the Hardware Monitor readings. On the video pages of the Swedish newspaper site it was generally about 10ºC hotter than the CPU core temperatures, which were generally in the 60'sC, while the CPU A diode was in the 70'sC.
So, with your CPU Diode temp at 80ºC the CPU core temps were probably only at about 70C, which, as I said, is about where the fan speeds actually usually start to increase under normal MacOSX control. (The algorithms used to determine fan speed in Macs aren't actually based on CPU temperature alone, but depend on the readings from various temperature sensors, together with measurement of electrical current draw etc, so no single CPU temperature is responsible)
All in all, when I look back at your earlier post as well, I think your MBP is probably simply operating normally in the situations you mention. It certainly won't be doing it any harm (the maximum CPU core temperatures allowable for the 13" model are either 90ºC or 100ºC, depending on the actual procesor fitted, and this equates to a CPU A temperature diode - the one your software is measuring - of over 100ºC.) At 80º CPU A temperature the fans should only just be starting to increase, and you will find that they cut in quite aggressively from then on in, making sure that the core temperatures are not exceeded.
So I don't think you need to worry about this situation in terms of the computer itself, though you should certainly be able to reduce the temperatures somewhat if you follow the approaches I mentioned with respect to Flash etc in my earlier post.
If your concern is mainly comfort when using the computer, all I can suggest is that you follow Apple's own instructions about these computers being "notebooks", not "laptops", and when using it in a comparatively "high demand" situation such as watching flash videos use it on a desk, or do what I do and simply stick it on a thin plastic or wooden board when it is resting on my knees. There are all sorts of fancy "laptop cooler" devices out there that you can spend money on if you wish, with everything from powered fans to chemically based cooling processes, but I've always found that a light weight $2 plastic chopping board from Ikea does the job perfectly well in such situations!
Cheers
Rod

Gaming issues and heat issues, running windows 8.1 pro via bootcamp

I have a few problems, and I don't know what else to do, then to write for help here..
I really hope someone out there can help me, because I have had this problem since I bought my laptop mid 2012, and I got smarter since then, so now I know that I actually shouldn't have these problems, it's not because my very expensive laptop is bad, or that it is a laptop or because it's a mac, regardless of what people say, I'm positively certain that it's a problem which shouldn't be there.
I have pretty great specs, (trust me i checked them out, not the best in the world, but pretty good) yet I can't enjoy 1 single mmorpg game like, Tera, or the new Archeage (currently in open beta), or any other game, (swordsman online)... Even though people say Tera has bad coding, I have tried adjusting things for weeks if not months, NOTHING helps, i get a frame rate that is from 0-25 very unstable, usually around 7-12, and sure if I go the lowest settings in the games I can get very unstable framerates but i guess they can get up to around 35-72 but drops to like 7 or 3 sometimes as well, so even on the LOWEST settings in the games I can't enjoy the games fully... It lags and such because of the low fps ofc...
Other than that it also have a heat issue, mostly when running windows 8.1 in bootcamp.
It get's quite hot, just by opening a browser window, and yes i have tried reseting smc, and p-rams, many times.. nothing seems to help.
And even if it helped the heat problem, the gaming problem is still there.
Now to my specs: (I have the macbook pro retina, mid 2012, 15 inch)
- Prosseser: 2.6GHz quad-core Intel Core i7 processor (Turbo Boost up to 3.6GHz) with 6MB shared L3 cache. "Core i7" processor (3720QM)
- Memory: 16GB 1600MHz DDR3L onboard memory
- Storage: 256GB ssd flash storage. (Seperated into os x = 130GB, windows 8.1 pro = 120GB) Running games and such from my 1TB external harddisk.
- Graphics and video support:
Intel HD Graphics 4000
NVIDIA GeForce GT 650M with 1GB of GDDR5 memory and automatic graphics switching
Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on up to two external displays, at millions of colors.
And here's a link to see what is inside it for yourself: http://http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core- i7-2.6-15-mid-2012-retina-display-specs.html
When that is said, apple's warranty has run out, and I didn't buy apple care, but I still have warranty from the store (humac) I bought it in, because in my country the law is warranty 2 years, no matter what, but if i can avoid it, I REALLY would like to avoid switching it out with a new one, since there could be problems all over again, and I would lose what I have on it right now, plus it's a hassle to get a new one, they will always try and fix it for a long long time before they give a new one, and probably can't find the problem...
But if that's the only thing i can do about it, I will ofc, but just don't advise me to do that, unless there's no other solution to the problems.
Please help me.
ps: sorry if I posted it the wrong place, I wasn't allowed to post it the right place by apple...

If the underlying hardware was exposed correctly by the CSM-BIOS when Windows was installed, your Device Manager should look like this.
If the Windows installer did not see any devices as your screen indicates, Windows will use generic software-based drivers which will be very slow and painful.
Rudegar ... I think the Windows installer did not see any hardware, otherwise there should be HW with yellow triangles with exclamation marks.

Satellite P200 (PSPB6A) - Heating Issue

I have recently setup my Toshiba Satellite P200 notebook as a Win-XP(SP 2) & Win-Vista Home Premium dual boot. I have also installed the SpeedFan utility to monitor component temperature on the system.
When booting with Win-Vista Home Premium, the CPU temperature is generally in the 50-55(degree Celsius) range. However, on booting with XP, the temperature shoots up to the 65-70(degree Celsius) range and a loud noise from the fan is heard.
Would someone be able to help me figure out as to what could be the problem with the installation?
Thanks
Arun

You are speaking about heating issue if then temperature increased to 65-70 degree celsius?
Hey buddy, such temperature is nothing unusual
The CPU temperature can increase up to 100 degree Celsius and this depends on the notebook usage
Furthermore you said that you have installed Win XP on this notebook
In this case you should check the Power Saver settings
In Basic Setup you could change CPU control method, CPU processing speed and cooling method these settings would affect the temperature and the cooling

Do latest macbook pro's still have the heat issue? (7/10/06)

wondering if the latest revisions of macbook pro still have the heat issue.. i heard the issue of the fan going off/on causing that 'whine' is gone and now the last thing holding me back from making the 'switch' is this heat dealy.

My week 12 MBP has never had heat issues. It's fast, stable and comfortable to use.
The case bottom of my 5+ year old TiBook gets hotter than the MBP. I've used a tilt stand for PowerBooks for years, both to reduce heat and because I prefer the typing angle.
People are not getting burned. Really. If I were to charge a battery at the same time I'm running processes that load up both CPUs, the metal strip behind the function keys would get quite warm. It might be uncomfortable to touch (but doesn't have to be touched to use the computer). But it will not result in a physical burn, unless one loves discomfort enough to keep touching it for a protracted period. Even then, not a serious burn. A cup of coffee or tea is far more dangerous than a MacBook Pro.
I've encountered several hot-running MBPs owned by people that I know in my local area. In each case, the problem was caused by software that was loading up the processors at full blast. One case was a runaway process that was initiated by software that was incompatible with the Intel processors. Another was caused by a stalled startup item -- again, software incompatible with the Intel CPU. In both cases, Migration Assistant had been used and the applications had not been updated for Intel compatibility.
And still another case was a large collection of Widgets, some of which are badly written and load up the processors. Deactivating all but 3 or 4 Widgets made that computer run cool and quickly.
Complaints about heat on this forum dropped dramatically after the last firmware update.
If you want the most powerful notebook computer Apple has ever designed, get a MacBook Pro. I'm delighted with mine. No fix necessary, thank you.

Blackberry 9220 not starting

I had kept my blackberry 9220 in my hand bag while i was in a lecture. After an hour I wanted to check time but it wasnt working. i removed battery then tried to turn it on but it didn't. I connected it to wall charger but it still isnt starting, even LED isnt flashing.

The scenario goes like this sir. My BB has been automatically switched off because my battery has totally been drained for a long day of use. After almost 30mins, I charged it and stay it for about 2hrs of charging. Ive noticed after two hours that there is no led light existing, even the screen of my bb indicating that my unit is charging. So I pull my charger and I attempt to turn my phone on by simply pull-out my battery and returning it back to the unit but I wait for couple of minutes but it doesnt turned on. The next day i borrowed my friends bb9220 full-charged battery which is the same unit i have right now and insert it in my phone but unfortunately it doesnt turned on...So I also checked my battery by inserting it in my friends unit, it was fully drained but when i charge it the led light turns on as well as the screen of her phone indicating that the battery is charging which it doesnt happen in my phone. So when i read this forum, i followed the 4h15m trick but nothing happens. That was the scenario which I think my bb9220 encounter some problems. Hope you can help me for this.Thank you and God BLess...

A7000 heating issue

After recent update, phone ll heat up while using 3g.
Also please consider increasing volumel level, it's low at full volume also compated to other phones.

Lot of issues.
1. Heating issues while charging, while talking, while browsing. Got a 9 mb update 2 day. Let's see what all does get resolved.
2. Still no update to resolve the issue regarding how to transfer apps to external sd card
3. Some times mobile data doesn't get turned on when switching between networks even though the network signal is good. Have to switch off and switch on the phone.
4. Unable to install other apps after installing asphalt 8 even though space is 600 mb under phone memory.
Will keep updating abt issues.
Have been using this phone for the last 20 days.

Heating issue lenovo a6000 plus

What is the normal temperature of A6000 Plus ??

Hi,i have observed the same issue with my Lenovo A6000 Plus.I inserted memory card (7GB was full out of 8GB) loaded with images, songs, videos etc.Phone started heating up badly just like heater when i launch gallery app to check images & videos. but it failed to load images.Then i checked music app to play some sound tracks. i faced the same i.e. songs did not get fetch from SD card.I went in battery settings to check what application is consuming battery. i found that "Mediaserver" application is consuming battery above 70%. Same SD card i inserted in other phones like Motorola. there it works smoothly without any heating issue.I guess lenovo team should fix this problem because eventhough we insert formated SD card, one day it will get full and will face this problem in future too.

Heating Issue in BlackBerry 9220

Similar Messages

Maybe you are looking for