Heating problem from camera side

as i remember i used to play games for at least 2hours continuously and there was no heating problem with my Lumia 720.but now i am getting some issues with that. Only after 5min of normal usage it is starting radiating heat which i can feel . What is causing it to get hot only after few min of usage.

hmm. any device gets warm when you are playing games as it is stressing the processor and requiring more power usage. the amount of heat and power needed and created I have found to differentiate based on if GPS/data/camera are used a lot, where as others that are just resident on the device without connection don't seem to get as hot.

Similar Messages

Only half of the body just below the camera and steel side of camera side is getting heated up just after 10 , 15 mins of usage i my iphone 4 is it normal...as earlier the body was not heating up even after 2 hours....the problem started after updating t

only half of the body just below the camera and steel side of camera side is getting heated up just after 10 , 15 mins of usage i my iphone 4 is it normal...as earlier the body was not heating up even after 2 hours....the problem started after updating to 6.1.2
iPhone 4, iOS 6.1.2

Hi, did you ever solve this problem?
My 1 year old -- ha! one month out of warranty -- iPhone 4 has been having a nearly identical problem over the past few days.
It started by dying completely so I had the battery replaced, thinking it was simply battery issue.
It then worked again for a moment but started doing exactly what you describe, going through a reset cycle (longer than 30 seconds but who's counting). And it felt quite warm.
Did hard reset, plugged into wall charger and MBP USB but the new battery wouldn't even get a full charge (a whopping 92% after nearly two days). It would even lose battery when plugged in if I opened an app. And all the while plugged in, if I left the phone on, it would cycle through these resets. So I turned it off to try to charge it.
Now suddenly, it's dead again. Totally black, and hard reset does nothing. Up until two days ago there was nothing wrong whatsoever with this phone! And I hadn't even installed a new app that could be the root of the issue. No idea whatsoever what caused this.
Any help would be much appreciated!!

Hp slate 6 heating problem, network connectivity problem and now camera problem

Hello, I have using this tablet since last 4 month and after upgrading to kitkat there is phone heating problem and network connectivity problem getting started some time it will show network but during that we can not receiving or calling through it and even after put in flite mode it will not resume so have to restart several time. Now about 4 days ago kernal updating automaticaly in my phone so i happy that may shortout the all problems but rather than it will added one more problem which related to camera while goes in setting of camera it will automatically closed. Have you tested this tablet or not ???? and why from your site any actions has been taken ???Why there is no Solutions are given from your site????

Hello Rohit,Can you check if you updated to the latest version?Here is the link: (you can choose the latest version to download and update it by SD card)- base on your regionhttp://support.hp.com/us-en/drivers/selfservice/HP-Slate-6-VoiceTab/6818329/model/7386537

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

PSE 10 from Apple Store problem with camera raw 6.7 upgrade

PSE 9 was not opening Nikon d4 raw files so I've purchased PSE 10 at the Apple Store and installed on my Mac. PSE 10 is still not opening d4 raw files (camera raw 6.5). I tried to update to 6.7 taken from Adobe but did not succeed to install it. Could you please advice what to do?

Thanks for your help. It works !!!
Bartek A
Wiadomość napisana przez Barbara B. w dniu 17 maj 2012, o godz. 00:34:
Re: PSE 10 from Apple Store problem with camera raw 6.7 upgrade
created by Barbara B. in Photoshop Elements - View the full discussion
You will have to do the update manually for the app store version. Instructions are here:
http://forums.adobe.com/message/4106477
(that's for 6.6 but the steps/file paths are the same for 6.7)
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4414265#4414265
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4414265#4414265. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

When photo stream is supposed to be fixed?my photos is not going to photo stream from camera roll, so when this problem will be fixed by apple?

when photo stream is supposed to be fixed?my photos is not going to photo stream from camera roll, so when this problem will be fixed by apple?

There is nothing wrong with Photostream. The "problem" is likely in the way you are using it.
In order for photos to be moved into Photostream, two things must happen. (1) you have to be connected to Wifi, and (2) you have to exit the Camera app. Unless both of those things happen, the photos will not be transferred to Photostream.
So, shut down your camera app, and connect to Wifi. Wait a while, and the photos you took with your iPhone should be transferred.

I am unable to import pictures from camera to iphoto 9 or 11 without getting message saying "the file is an unrecognizable format" They are JPG files like always but now i can only import from a CD. What is the fix to this problem?

I have always been able to import pictures from camera to iphoto without a problem. Now, for some unknown reason our iMac and Mac Laptop will not import pictures from camera to iphoto 9 or 11...what is the fix to this problem? It will only accept import from a CD.

I have always been able to import pictures from camera to iphoto without a problem. Now, for some unknown reason our iMac and Mac Laptop will not import pictures from camera to iphoto 9 or 11...what is the fix to this problem? It will only accept import from a CD.

I am not able to change photo to video from Camera mode. The same problem is occurred now with iPhone. What is a problem?

I am not able to change photo to video from Camera mode. The same problem is occurred now with iPhone. What is a problem?

Ahhhh... didn't know this with iOS 7. Thank you so much.

Problem with importing RAW files from camera

LR 1.3 refuses to import raw files from my camera. Only JPEG's are imported. Got a Canon 350D/Rebel XT. Once I copied the raw files to disk (using Camera Window) Import from disk works fine and converts the CR2 to DNG without a problem. The preference "Treat JPEG files next to..." makes no difference. Anybody a clue what's wrong?
Thanks, Edwin

Yeah this is a known bug with Canon cameras in general (not just using Lightroom!). If you use the camera to download your images anyway, I believe the trick is to set the camera to mass storage mode and you'll also get the RAWs. Lightroom's import from camera is very buggy though, hence it is a better idea to use a reader, or to manually copy the files to your harddisk first and import from there.

Details: i can not buy any thing from the app store and any thing from in side any games pls fix my problem urgent and as soon

Details:
Hi i can not buy any thing from the app store and any thing from in side any games pls fix my problem urgent and as soon
Note this is second email pls answer and fix my problem
<Email Edited by Host>

These are public forums, you are not talking to iTunes Support here (most of the people here, including myself, are fellow users) - I've asked the hosts to remove your email address from your post
If you are getting a message to contact iTunes support then you can do so via this page and ask them why the message is appearing (we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If it's a different problem ... ?

Import From Camera problem

I thought I'd try out the "Import From Camera" script as the first part of my workflow. I had a card with about 30 images on it taken with my Canon 1DMkII. I typically rename my files "YYMMDD_hhmmss", and although there is no explicit way to do this (EXIF Capture Date) with IFC it appeared that using the "modified date" option gave the same results.
I ran the script and immediately encountered several errors - the script said that "One or more of the downloaded image filenames match filenames in the specified destination folder ..." I knew this wasn't the case since all images were taken at different times.
Is there another way to use the EXIF date within IFC? Is this a script I can modify myself in some way?
It does almost everything I want, but the renaming part is the deal-killer.
Any thoughts would be appreciated.
Thanks,
Jeff

Try using a card reader. That way you can open the memory card as it were an external volume, select and drag the files in small groups to a folder on the Desktop. That way you can isolate those files that are causing the problem.
If there are only a few files that won't cooperate you may have to sacrifice them so you can reformat the memory card using the camera and then test it with some test photos and videos.
Is it just videos that won't copy? See if you can determine which files are causing the problem.
OT

Im having a problem uploading pics to my FB profile page from camera app. they are going into an IOS album instead. this just started feb 12th and i have had my phone since dec of 2012

im having a problem uploading pics to FB profile page from camera app. they are going into an IOS album instead. this just started feb 12th and i have had my phone since dec of 2012

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

Loss of internet connection from windows side of imac duo core

I have cable modem as internet hookup. When I am in Mac I have no problems, but every time I either change to the Windows side, or the computer is turned off or goes off, when Windows comes up, I can't access the internet.
I have gone into control panel and it states that the cable modem is unplugged or not connected. I then have to literally unplug the cable from the computer, wait a few seconds and then plug it back in.
This has been going on several months and started after I had a cable issue at the house and the cable guys came out and fixed it. they changed some things on my computer.
I think something on the MAC side was actually changed and that is impacting the windows side.
Prior to that I could access the internet from either side w/no problem.
Now, even if I unplug the cable and then plug it in, the computer is not recognizing that the cable is plugged in. As you can see, I am still having NO problem w/the MAC side.
Any ideas what command or default setting might have been changed to impact the Windows side in this fashion. thanks

what is the firmware version on the router?? try reducing MTU to 1452...let me know if you have any issues will get back to you.
thanks

Cannot copy photos from camera roll to a synch folder

I cannot copy any photo stored in Camera Roll to folder that synch's with my PC. > "PC Synch Folder"<    I am using iphone 4s and iPad 3.   Happens to both iDevices.
On the iDevice the "PC Synch Folder" is greyed out when trying to do a copy.   In fact, I cannot even delete that folder from either iDevices.
For what it's worth, I can create a new folder on either iDevice and copy from Camera Roll to it. Fine. But that folder will not talk to the folder that I want to synch with my PC. Strange?
The folder "PC Synch Folder" will indeed sych any picture I put in there from the PC side.   However, what is in there, does not show up in Camera Roll. What I have in Camera roll cannot be transferred into the "PC Synch Folder"   It's like there is a wall between the folders.
Hence the problem is ... pictures taken on either iDevices cannot be transferred back to my PC!   I don't want this !
This seems most odd. Have I done something dumb and simple?
/tom

I use Picasa. You don't have to use iTunes at all. Connect the phone with the USB cable and launch the app of your choice, such as Picasa. Click the "Import" button at the upper left. Your iPhone should appear in the dropdown of choices to import from. You can then import all or some of the photos in the Camera Roll. You should be able to do the same thing with Microsoft Picture Manager or any other photo management program.
The reason that Elements is the only choice is that's the only one that iPhoto on the phone recognizes albums in.
You cannot move photos INTO the Camera Roll from your computer; it's a one-way transfer. But you can sync photos to the Photos app on the iPhone. You either use Elements, or just create a folder on your computer for photos to sync, then create a sub-folder for each album you want on your computer. Copy the photos to each album, then go to the Photos tab in iTunes and select the top-level folder. When you sync each sub-folder will become an album on the iPhone.
However, I consider the photo app on the iPhone rather limited and klunky. Instead I use the app MyPics from the app store. It syncs photos from my Picasa Web albums directly to the phone over the air. I can also create albums in Picasa Web from the phone, and upload images from the Camera Roll directly to Picasa Web.
Another way to get photos (and other files) to and from the phone is Dropbox and similar cloud-based storage solutions.

Found an error related to "can't get video from Camera"

So, I am back with the same issue: it is now 3-4 months I can't Video chat because iChat AV tells me "can't get video from camera". I disable the firewall (for the test), I forwarded nearly ALL the TCP and UDP packets from my router to the mac, I stopped any application such as PostgreSQL or others which might interfeer. I checked I didn't have any strange firewall rules still on even when switched of from UserPreferences (sudo ipfw list)...
Well, I can see myself with the camera but it won't get the image of the party I am connecting to. So... I looked in the console and:
2006-03-04 19:09:14.926 iChat[9245] WARNING: Freeze-frame failed: couldn't get local buffer for layer Local!
Each time, this is the message.
I did the downgrade Quicktime test I also reinstalled the combined update... nothing worked.
It seems CRAZY that nobody at Apple can at least tell me WHERE to have a look. After all the message is not very clear. Where is the problem? My mac, my router, iChat?
I filed a bug BTW... because it DID work in the past and now stoped working, so my netgear router can't be in fault (I also checked the logs of the router and of the firewall... nothing seemed to be stoped)
Alex

Hi Alexander,
Defcom aslo has a Netgear And I will let him come back on that side.
On the error front iChat has about 4 standard messages.
1) User did not Respond.
2) Insufficient Bandwidth.
3) Can not get Video from Camera
4) Did not get data for 10 secs
Unfortunately the causes can overlap, hence the lack of Ahaa !!
The most common feature of all of them is something to do with the way the routing devices are set up.
This leads us to start with the LAN set up,
The ports that are open,
the method used to open them,
Whether DHCP is being used with Port Forwarding as the IP can change to your computer and the Port Forwarding point to the "wrong" IP
How many devices are in the link to the Internet ?
IF you are doing NAT (Port Forwarding or Port Triggering) ?
Whether your ISP has started dong NAT to your service
Whether they offer a SIP based Service like VoIP phones.
11:29 PM Monday; March 6, 2006

Heating problem from camera side

Similar Messages

Maybe you are looking for