Heating problems / sound is gone / not connected to pc

Hi guys, I am writing with extremely big problems. I made three times factory reset and nothing is working. First of all, the sound from my phone is gone, so whenever someone is calling me, I have no sound. Second of all, phone after lollipop update is overheating - tempreture is extremely hot. Third problem, that its not recognising PC anymore through usb cable. Moreover, apps crushing very very often. I wrote to official sony twitter account and they advised me how to fix these problems, but it never helped me... I have no warrenty anymore, as it was purchased in September 2013. It is really dissapointing from Sony, as I was huge fan of it and this exprerience is making me sad. Can anyone advise me on it please? Thank you in advance,

 Contact Sony directly, not through social media (twitter, facebook) or even email, call them or live chat http://support.sonymobile.com/global-en/contactUs/

Similar Messages

  • I had a problem with my WRT54GS not connecting to my inte...

    I had a problem with my WRT54GS not connecting to my internet until I cloned my old routers mac address. I was using a BEFW11S4 which was bullet proof and worked for several years until I changed to Wireless G. Upon purchasing the WRT54GS and setting up all parameters exactly like I had before I could not make any connections, wireless or otherwise until I cloned my mac address to the same address as my previous router. Apparently my ISP had that mac address registered and would not properly perform DHCP even though all other paremeters were correct. I read lots of messages here on line with issues with the WRT54GS connecting and this fixed my problem outright. If you upgrade from a previous generation router (Linksys or otherwise apparently) copy your old routers mac address and clone it to your new router and you should be able to connect. This fixed my problem after several hours and days of troubleshooting. Good Luck Karnage

    As an alternative to using MAC address cloning, you can phone your ISP, tell them you have a new router, and tell them to reset their system to accept the MAC address of your new router.   This way, you won't have to remember the old MAC address, in the event that you need to reset your router to factory defaults.

  • Suddenly, I cannot sync my Boselink with iPhone. Iphone 4s says Bose sound...not connected. I JUST updated software to iOS 6.1.3. Why isn't this working? I can not play pandora on my Bose.

    Suddenly, I cannot sync my Boselink with iPhone. Iphone 4s says Bose sound...not connected. I JUST updated software to iOS 6.1.3. Why isn't this working? I can not play pandora on my Bose.

    They are absolutely now paired after doing all you said, as I reset both the Bose Link and the Iphone.  Now we have a pair, but no sound on the speaker or the iphone when they are connected. I know they are connected b/c the iphone says they are in the blue tooth setting AND the Bose has a solid blue tooth light on. 
    Now what?  This is beyond frustrating and only happened when I UPDATED ios!
    Thank you!

  • Is there a problem with FaceTime, can not connect. When dial it connects and drops. When friends are calling me they have calling message and I have connecting but it does not connect. Need help, face time is my life line.

    Face time not working. When dialled it says connecting and drops immediately. When my friends calling it show connecting but it does not.
    Is there a problem with face time. I am in south Africa, it was working perfectly up to Easter. Please help this is my life line.

    There is a barely acknowledged issue. For Mac users Apple has released an update to the app, but for iOS users the recommendation is for users to update their ipad to the most recent operating system.
    There may be a fix coming for iOS6 users (which seem to be many of those having problems) or there may not be. If your ipad isn't up to date then you can update it and see if that helps, or if you don't want to update then you may want to wait and see if there is either a fix or if it fixes itself.

  • MacBook Pro to Samsung sound bar Bluetooth not connecting

    Hello all,
    I recently purchased a Samsung sound bar with bluetooth connectivity. I can connect my iPhone 5s to it and stream music with no problem. But when I try to connect my MacBook Pro, it simply connects and promptly disconnects. I have tried shut down, restart, and even unplugging the battery on the MacBook with no luck.
    I am running OSX 10.9.3 with all available updates.
    Has anyone else had this problem?
    Thanks,
    Jerry

    Same here I'm using a Samsung HW-H550 Sound Bar - Connect's with iPhone/iPad on IOS 7.1.1 on my Mac Book Pro Retina OS X 10.9.3. Having no joy even went down the root of deleting the Bluetooth Pref file  didn't work either.
    Looking forward to any workable solution

  • My Apple tv has connection problems. I receive not connected to internet or home sharing not on even though it is

    Apple TV is allways asking me to turn on home sharing, home sharing is allready on so I have turn it off and then turn it back on. Also it is telling me that it is not connected to the internet even though I entered my network key correctly and all my other Apple wireless devices are working perfectly. Any ideas please ?

    Having reread your post, i note you say you connected the thernet cable to a wifi extender, are you by any chance using the wifi extender when trying wifi and by extender do you mean a WDS extended network. I have seen quite a few reports that networks extended using WDS have problems.
    Although it may be a weak signal, are you able to temporarily disable WDS to see if this resolves the connection issue.

  • Custom Hardware Fan Control - problem if speed pin not connected?

    Hi There,
    I am planing to install a hardware fan control (poti) to my MacPro 1.1 rear fan. (because I have a defective northbridge temperature sensor and the fan is running at maximum speed... so i thought of slowing it down with a fan control for the pci slots)
    I read that the pinning of the Fan is: Gnd, 12V, Speed, Control Pin (analog Voltage)
    So when i would attach a fan control (just a poti) between some +5v and the Control Pin I think I should be able to control the fan manualy - am i right?
    But then the speed signal is not the speed the mac pro fan control software think of... so would it be a problem e.g. if i disconnect the speed pin from the mainboard fan connector?
    what would happen then? is the mac pro powering up the other fans for some kind of failsafe?
    Or have you other suggestions how I can lower the speed of the rear fan manually?
    thanks in advance,
    Stefan

    2010 2.8 Special $2119 - and throw in 6-core 3.3GHz yourself for $590
    Take a look at the project some have undertaken to go with water block.
    Send the motherboard in to have a 'skilled' electrician? repair the board perhaps.
    4 fans, 3 under the control of SMCFAnControl utility. Maybe disable the one fan and make up for it with your own fan and running the others efficiently.
    There are also VGA copper coolers.
    FBDIMMs bleed heat: maybe the RAM fan cooler kit in there to deal with large source of heat. New higher density DIMMs are better made and few DIMMs = less heat even if 4GB.
    Use ice packs, dry ice and liquid nitrogen to super cool :-)

  • Internet Server Problems - Many Sites Will Not Connect

    I just set up a new iMac, and I cannot connect to many web sites. I also cannot connect to iChat at all. OS X Mail seems to work fine, but that is the only component that works on the Internet without issue.
    The symptoms are like this: I can use Safari to connect to some web sites without problem, but others will result in a "Failed to open page" error message: "Safari can't find the server." To complicate maters, some pages will download plain text but no images or page formatting. For example, Yahoo! downloads all the table structure and text, but it will not download any of the images from the page. When I look at the activity report, it says "can't find host" for all the components that did not download. Examples of sites that I cannot browse to at all include:
    apple.acuweather.com
    www.aim.com (This is probably why I cannot se iChat at all)
    www.aol.com
    www.monster.com
    Examples of pages that download plain text only:
    www.amazon.com (for all .gif files I get "can't find host" error message in the Activity Status.
    www.yahoo.com (same problem, "can't find host")
    www.cnn.com ("can't find host")
    I am using a local wireless Internet Service Provider. My AirPort status tells me I am connected just fine, and there are some web pages that download without problem (e.g., most Apple web sites, but not all).
    I have three Dell Laptops in the house that I've been running for years, and they have never had any trouble with web or network issues. There is a laptop right next to me on the same desk that I have the new iMac, and it can reach every web site that the iMac cannot.
    Please give me your thoughts. It seems that the networking software within this machine (the iMac) cannot resolve certain web aliases, but I don't know what setting to adjust to fix that.
    Thanks in advance!
    Doug

    HI,
    Try using OpenDNS / Free - Basic
    Since the problem exists in all your browsers, it could be your ISP.
    Question... you have Netscape and IE installed? Do you have a Windows partition?
    Carolyn

  • Problems with magnetic charger not connecting

    I bought my MacBook Pro back in August, and haven't had any problems until now.
    When I plug in my charger, the little green light will come on, switch to orange, and after about two minutes or so, turn off. It turns off when I move, and I have to unplug it from the computer and try a couple times (both facing forwards and backwards) to get it to connect again, and then keep repeating the process. I have AppleCare, does anyone know if this would be covered under my warranty?

    I am having a very similar problem. I also purchased my MacBook Pro in June. Like you, my charger will not work for more than a few minutes or at all when plugged into the outlets at work or in my home. I have taken my charger in an AppleCare provider twice now and both times it worked properly there so they could not give me a replacement. I was wondering if you have taken yours in and was able to have it replaced or if you have had any luck identifying the problem. I'm very frustrated and I don't really want to spend $80 for a new charger when my computer is still under warranty.

  • 2.5 Problems - SOUND and FAILURE to Connect to Email and Weather

    Hello, The upgrade didn't make a difference - the Sound on my iPhone is WAY too low. I cannot use it in a city, period. (must use a headset - I've never had a cellphone that required a headset in moderate noise atmospheres). The Speakerphone is profoundly weak - it may as well not exist. Literally it sounds like a regular cell phone NOT on speaker but turned up 3/4 volume. I had several cell phones that were naturally loud like that. I sure miss that feature.
    What is the DEFINITIVE solution for this? I've been away and reckon there MUST be a Famous Apple Solution by now?
    MAIL CONNECT FAILURE - most often at Home (NO Cell signal; Wireless signal from Linksys access point) but very often wherever I am, when I click the mail button, NOTHING happens except the status says 'connecting' for a while then stops and the notes read 'last updated [3 hours ago]' That is, last updated 'time' from my LAST successful email update several hours ago, but NOT from any current download. I shut down, try again - nothing seems to work and the Mail will act this way in what seems an arbitrary amount of time/failures (sometimes overnight) then it will behave as designed - connect and download when I click on Mail button.
    The SAME THING (periodic, arbitrary Failure to Connect) happens with the Weather, except with the Weather the status reads 'updating...' for a bit, then states 'update failed'. Remember, this happens at home (WiFi) AND when I'm in Public (EDGE AND WiFi) and is seemingly arbitrary. (I'm pretty sure it happens with Stocks as well, but I'm not trying as often...)

    Jaymzwafu wrote:
    was there an update today?? why mine showed check update 11/02/07... whats the update version?? and how come nobody post a shout that there was an update today??
    There was no update on 10/26 nor has there been any update for a number of weeks.
    My check update currently says 11/1/07 but that merely means that iTunes will automatically check on that date. It does not indicate that there will be an update.
    You can always check by manually depressing the 'Check for Update' button on the iTunes info page. That will tell you whether your current firmware is the most recent version and what the version number is.

  • "The Problem" is IPOD will not connect to windows

    I guess for those people that have not spent the last few days reading these posts I will add that "The Problem" that I am referring to in my previous post is the same one that everyone seems to be having. One of my IPODs was rendered absolutely useless by the new updater. (only one was updated) I believe that the com port on the IPOD is being "jammed" by the software update. I had never updated before and my two IPODS have worked flawlessly up to now. I believe that this fix will be the best for me because it basically cleans it back to factory state. I have read some old posts and feel that some of the older updaters have killed some IPODS in the past. I would suggest that if you decide to follow my previous post and restore. That you go back to the oldest updater that will provide all the functionality that you actually use. "If you do not feel comfortable taking the IPOD apart I am sure there are places that will do this for you.
    win 2000   Windows 2000  

    Because an iPod wil not sync with Windows Media Player. It will only sync with iTunes.

  • Software update problem - says I'm not connected.

    I have a Macbook that I got about five years ago with the 10.5.8 software on it. I have never been able to update the software on it because when I search, I get the error message cannot find update, please connect to the internet. But I am connected. I've done the 'ping' test where I have pinged www.apple.com and it comes back and confirms I am connected. If someone could help I'd really appreciate it, as I can't transfer anything to or from my iPhone because the software is so new.
    Thanks!

    You have to understand the difference between an Update and an Upgrade.
    An Update is a free change to add to the base code or as a bug fix within an existing Operating System. Such as the .8 added to 10.5.
    An Upgrade is a complete new Operating System that must be purchased. Such as 10.5 Leopard to 10.6 Snow Leopard.
    10.5 Leopard was written for Power PC Macs with code added to force it to run on Intel processors.
    10.6 Snow Leopard has completely rewritten code and only runs on Intel Macs.
    10.7 Lion ($19.99) used some 32 bit which allows it to run on Late 2006 through Early 2008 MacBooks and a lot of 64 bit code.
    10.8 Mountain Lion ($19.99) is pure 64 bit, which excludes more systems than Lion did. It can only run on the Late 2008 through Mid 2010 MacBooks. It's not something you can add memory to, for example, as it involves the base architecture.
    10.9 Mavericks is pure 64 bit and is a free download from the App store.
    The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard After you’ve installed that then download the 10.6.8 combo updater to finish it off. http://support.apple.com/kb/DL1399 You will need to be running 10.6.8 to access the App Store to order Lion, Mountain Lion or Mavericks which are downloads only.
    System Requirements for 10.6:
    Mac computer with an Intel processor
    1GB of memory
    5GB of available disk space
    DVD drive for installation
    Some features require a compatible internet service provider: fees may apply.

  • Iphone 4s, problem when in 3g (not connected to wifi)

    i have an iphone 4s and have had a problem with 3g since i upgraded to the IOS 6.1.  Over the weekend, I upgraded to the IOS 6.1.1 and im still having problems getting service for internet. I can pull up the internet, but it is SLOW!!!!.  And, I cant open video or anything like that.  any solutions? Because 6.1.1 didnt solve it.
    Thanks for any help you can give me.

    I have the same problem! Before the upgrade, if I wasn't connected to the internet, any messages sent to me from an iphone would convert automatically to a text message. I have payg tarriff, so I turn cell data off, as it costs too much to use it. I have wifi at home and work, but if I'm out and about, I don't receive texts from iphone users until I'm on wifi. I get them ok from non iphone users. There was never any problem until ios7

  • Problem using mail, communities not connect to int...

    Opera mini browser I'm using properly. But I'm not using mail &communities

    Hello, Shri123.
    Thank you for posting and welcome to the Nokia Support Discussions.
    We'd love to help you. You're not able to access the Mail and the Communities app, right? Can you tell us your phone model? Are you getting any error message? If yes, please provide. What are the fixes that you have tried so far to resolve the issue? Is your phone's software updated? Have you tried to reboot the phone?
    We look forward to your response.

  • DV6000 Vista Audio Problems (SOUND WORKS just not right)

    So audio through speakers, headphones work fine.
    But I have a Z-5500 from Logitech and want to use the direct line function, and turn the three inputs in the front into the three audio channels for hd audio.
    In XP there was a switcher for this and it was easy, but vista ...
    can anyone help me out here if you know what I mean, ive been googling the last hour to no luck.

    The best advice I can give is to fully remove ALL Creative software.We've compiled a list of entries that will cause problems here. It's very important before installing newer files.http://nomoregoatsoup.wordpress.com/...tall-problems/Then install some better drivers and see if that cures your issues. The 2.2.0002 drivers are really, really awful, 99% of people I've spoken to had problems with them. I personally like 2.5.0002 Hope this helps.

Maybe you are looking for