Heats up and shuts down

Found my I book with the fan on and very hot. I left it in the sleep mode as always witht the power cord on. I had to reboot after trying to turn the power on with the switch, tried several times before it would respond. Time to send it back for service?? This has happened twice now in the past 4 days

You may want to determine if you are doing many processor intensive tasks with your iBook. If you are, you may want to not do them all at the same time, this would put quite a burden on your G4 Processor and ultimately the fan. Furthermore, make sure your fan/ventilation system is running smoothly. Ensure that there is not an extremely large accumulation of dust on the side and back fan grilles. (The side one is located to the right of the ports just beside the left palmrest and the back one is tucked away under the screen hinge.) If there is a lot of dust, try vacuuming it out but PLEASE follow safety instructions as to not damage your computer electrostatically. I can not be held responsible for you damaging your iBook G4 with a vacuum cleaner as an attempt to remove dust collection. All I can say is to remove your battery and unplug all mice, keyboards, iPods, power cords, digital cameras, etc. and MAKE SURE THE SYSTEM IS COMPLETELY SHUT DOWN AND NOT JUST SLEEPING then put the end of a vacuum cleaner up to the grilles and vacuum out the dust.
Hope this clears up your issue and your ventilation system which may be responsible for excessive fan usage. I'm not sure whether you should take your iBook to an apple store or reseller for service. You may want to see if the problem persists after these treatments. Good Luck as always and thank you for choosing Apple.

Similar Messages

  • My laptop heats up and shuts down

    I bought my laptop in US and am using the same adapter. Maybe this is the reason, but I'm seriosly worried as my laptop after an hour of use becomes very hot and shuts down. I don't know what the problem really is, but lately, it seems to shut down even quickly.
    I thought the fans might not be working, but they were when I looked at them. It's happened from the brand new, and I've used it like that for six months now. But since the problem's become worst, I thought of asking for help here. Is there anything I can do?
    Thank you.

    HI Shalav,
    Your notebook will most likely be using a 'universal' mains adapter so it will work perfectly well in the UK as well as the US.
    Your problem is most likely to be a build up of dust in the CPU heat-sink which will reduce its effectiveness to the point where the build up of heat causes the thermal protection circuitry to opertae and shut off power.
    Clean out any accumulation of dust and also make sure that there is sufficient air able to circulate through the cooling system. Leave plenty of spoace around and under your notebook.
    regards,

  • NC6230 heats up and shuts down quickly

    If anyone can please help so I dont spend anymore money on this.LOL  I have a NC6230 that would overheat and shut down after half a minute of so.  I went on EBAY and purchased two other boards and I have the same issue.  Thinking I couldn't have 2 bad boards with the save issue I purchased a curcuit board.  Same issue.  I tried another known good processor with the same results.  I tried swapping memory with no success.  All of these tests were done with the power supply for power and no hard drive or OS.  I then powered it on with the battery only and it stayed running.  I powered it off and restarted with a external keyboard to check the BIOS and it overheated and shut off in 30 seconds.  No clue what else to try.  Is there a defect in the board which provides too much power to the board causing the shutdown?  Is this a defect in this board over time?
    Thanks for any help
    Kevin
    This question was solved.
    View Solution.

    Could be that the coolant is not working correctly.
    A typical heat pipe consists of a sealed pipe or tube made of a material with high thermal conductivity such as copper or aluminium at both hot and cold ends. A vacuum pump is used to remove all air from the empty heat pipe, and then the pipe is filled with a fraction of a percent by volume of working fluid (or coolant) chosen to match the operating temperature. Examples of such fluids include water, ethanol, acetone, sodium, or mercury.
    You can read the hole article at http://en.wikipedia.org/wiki/Heat_pipe .
    Not sure the life expectancy of the fluids.
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • My iPhone heat up and shut down after a few second of using then can't turn on for an hour.

    My problem is that, after a year my iphone 4 after a short time of use started to heat up than shut down. So i cant use my iphone for 2 month. Please help !!

    Try a reset ..
    Tap Settings > General > Reset > Reset Network Settings
    You will have to re enter the Wi-Fi password.
    Tips for speeding up iOS 7 > If You Think iOS 7 Feels Slow Here’s How to Speed It Up

  • I have a MacBook Pro that I bought almost a year ago, next day problems with the hard disc that could not be diagnosed by the service, after 3 months they realized it and changed it with a new one, after 3-4 months heated and shut down and dont work anymo

    I have a MacBook Pro that I bought almost a year ago, next day problems with the hard disc that could not be diagnosed by the service, after 3 months they realized it and changed it with a new one, after 3-4 months heated and shut down by itself and dont work anymore. From apple say even a year has not passed it is not under garancy and I should pay to fix it without ans issue.

    I have a MacBook Pro that I bought almost a year ago, next day problems with the hard disc that could not be diagnosed by the service, after 3 months they realized it and changed it with a new one, after 3-4 months heated and shut down by itself and dont work anymore. From apple say even a year has not passed it is not under garancy and I should pay to fix it without ans issue.

  • HP Pavilion dv7-3165dx heats up and shut's down

    My HP Pavilion dv7-3165dx heats up and shut's down/ locks up,  It does seem Hot so I'm assuming it's due to heat, or heat related. The Vent's are not blocked and no dust.. This could happen within the first 5 minutes of powering up. I swapped out the hard drive just to be sure it wasn't  the Hard drive.  any suggestion's or idea's with this brief explanation...

    You can chat online with a HP Specialist about your issue and details if your eligible to replace your laptop.
    http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-006&h_lang=en&h_cc=au&h_product=top&h_page=hpcom&h_c...

  • Has anyone else had any problems with their phone over heating and shutting down?

    I've had my phone for less a month and I've already had issues with my iphone 4. On several occassions it has overheated and shut down. On one occasion I put the phone in the side pocket of my purse where, I also had a charger for my camera. When I removed the phone, it was hot...not warm but hot! On another occasion I was at the movies and put the phone face down on my lap, at one point i touched the phone and again it was hot. When the movie was over, and I looked at the phone it had shut down....this has happened a few  times more since then. I've also had problems with the phone shutting down on it's own. I took it to my local apple store and the representative looked at my phone and ran a diagnostic check for me. He said the everything on my phone looked normal and that my phone probably needs a "breaking in" period...to give it a couple of months...He really didn't tell me much more...I don't use my phone for more than the basics...calling, texting, and some mild app use...I don't understand how I can be having these problems when I've had my phone for less than a month...The rep tried selling my the Apple insurance. He told me that through ATT I only have 30 days, and I would be better off getting this insurance. I feel very dissastisfied with the service I got. I was done with my appointment within 10 mins, I don't think the representative took the time to listen to my concerns.

    Thanks for your reply, but I guess whether this was a silly question is a matter of opinion. That is the whole purpose having these forums...so that people can post their questions, silly or not. Maybe you are an Apple expert or have "techy" knowledge, but I don't. So what may be silly or stupid for you, can be completely different for a novice apple consumer like me. If you must know, I did do my research, and I did do the basic trouble shooting.All to no avail. I took my phone to the apple store, had it diagnosed and was told some very inaccurate information. I ended up going back today, and got a second opinion. This person actually took the time to talk to me and to better explain Applecare and my warranty. She also told me that there is no such thing as a "break in" period, and when there is a shutting down issue, even after a "restore" that it was better to get it replaced. Which is what she did. She replaced my phone. Obviously, the first person, by his own admission, was too tired and ready to go home to actually take the time to explain and offer other options...

  • Satellite Pro A300D gets to warm and shuts down after short time. HELP!!!

    Hallo together,
    i bought the Satellite Pro A300D notebook 3 weeks ago. Since the beginning I have the problem that the notebook gets to warm and shuts down within an hour!
    I dont run any high performance application and I keep the left side of the notebook free so that the warm air can get away! I already cleaned the heatpipe by using a hoover.
    That couldnt be! I need the notebook for work and thats impossible...
    What can I do? Do I have it to send in?
    For help I am thankfull
    Frank
    Message was edited by: DerVogel

    Hi there DerVogel ,
    Sounds like a Heat related issue ????????
    Whenever it shutdown automatically does it turn on right away ? One symptom of a heat related issue is, it takes about several minutes before you can turn it back on again.
    Here is how you can isolate the issue since it could also be a software related problem.
    1) Turn on the system Tap F2 and boot on the system setup screen ( BIOS )
    2) Just stay on the Bios , If it doest shutdown on the bios then you might need to reinstall windows. or check if system is infected with spyware or a virus.
    But if it does the same thing then the best thing to so is to bring it to a Repair Center or Call Tech support for a depot service repair.
    Cheers ! hope this will help.
    Message was edited by: iSkO

  • Iphone overheats and shuts down when charging ?

    hello,
    since i have had my iphone 4s replace in april my iphone overheats and shuts down when charging?
    can anyone help?

    My 4S has recently shut down twice so far due to heat: Once in 100+ deg. in Arizona, when I left the phone in direct sunlight too long (that'll kill anything), and once just today, 96 deg. in Colorado, with the phone in my shirt chest pocket, not in direct sunlight. Each time, the phone was also encased in the hermetically sealed "Lifeproof" case, which probably contributed to heat build-up. If you're using a similar case with yours, either make sure to keep the phone in a cooler, shaded area, or just take it out of the case when the temps are this high. Definitely don't leave it in direct sunlight! In my case, although the 4S seems more heat-sensitive than my previous iPhones, I still find this behavior within acceptable parameters. But I wonder whether the overheating episodes might cause permanent damage...?

  • Need help? My laptop overheats and shuts down when up loading

    I installed Premier Elements 8 on Vista and finished my first video and when I try to upload through the share option to youtube Before 1/2 way my laptop overheats and shuts down. I have tried several times. I tried pluging laptop directly in to network so I was not uploading wireless. No luck. I also tried turning my screen down so it would make less heat. I dont know what else to try.

    What is happening is that the CPU and the HDD's are being stressed more than with most other operations. This is common and can be observed in places like Speedfan and Task Manager. There are a lot of files being written to, and read from. This is especially hard, if one only has a single internal HDD, as it must do so very much, and is being asked to do it all at the same time.
    In general, editing Video is about the toughest task that one can ask of a computer. The Export phase is about as tough as editing gets. If one is editing AVCHD footage, the CPU usage goes up even higher and almost exponentially!
    What you observe is not a fault of the software, but just how all NLE software must work.
    Unfortunately, most laptops are not properly equiped with adequate cooling to begin with. They also usually have a single HDD. That was why I went with an extreme "gaming" laptop to start, and then modified it for NLE work. It works fine, but I had to add the cooling pad, and Speedfan.
    Good luck,
    Hunt

  • My 4s overheats and shuts down

    When taking videos my iphone 4S overheats and shuts down after 6 to 10 minutes.  I took it out of its case so it's a white naked phone but the heats still does not disapate.  Any thoughts?

    Well the iPhone will shut down if it overheats .Since taking videos is processor intensive and screen is on , depending on outdoor temperature it might reach it's temperature limit and shut down .
    http://support.apple.com/kb/HT2101

  • UPS and shutting down servers

    Not sure if this thread should be better posted at the OS X Server forum, but let's try it
    Today I found the time to connect the UPS to our XServe via USB. It worked great, the UPS appears at ServerMonitor and also at the system preference panels energy settings.
    However the UPS has only one USB port, but we have currently two XServes. My intention is to keep the servers running as long as possible till the UPS reaches 25 % left of its energy. Then safely shutting down the servers.
    While it is easy to configure this on the server the UPS is connected, I find no setting for doing so at the other system. Basically the "master" XServe (that connects to the UPS) should shut down its "slaves" (the other XServe specifically).
    I already dealt with a quite old system some time before (Cobalt RaQ) where it was able to set this up (via the MAC addresses if I'm not wrong).
    I would look forward if someone can give me a glue how to realize this on the XServe ?

    >Okay, writing a script... I guess you don't have anything already written
    Nope, sorry.
    >The main problem would be that both servers can communicate with each other only by using their WAN IPs. So we would need to get some security (like authentication with a username and password) additionally.
    If your servers have two NICs, there's nothing preventing you from creating a private network between the two using a simple ethernet cable between them. That way they can communicate privately.
    > When I connect the UPS with an USB hub and on that hub both XServes, could this work ?
    No. USB doesn't support this kind of topology. There can only be one bus master. The other machine won't work.
    >The UPS also has a serial interface, just the XServe lacks of this "old technology"
    On the contrary. The XServe has a 9-pin serial interface on the back. It's normally configured as a console port for out-of-band management but you can configure it as a standard serial port by disabling SerialTerminalSupport (in /System/Library/StartupItems). However, the issue is then how to read the serial port. I'm guessing the software that ships with the UPS is designed to use the USB port and you may be on your own there.
    >By the way, I should mention that the UPS is a Belkin "Universal UPS".
    I don't think it makes a big difference. You'll have the same issues with any UPS vendor.
    The only other option I can think of is a network-aware UPS. Some UPSes (such as those from APC) have a network option where you can query the UPS over the network. It would then be relatively simple to query the UPS via SNMP to gauge its runtime and shut down safely. I don't know if the Belkin has this option.

  • If I have more then a few tabs open such as gmail, facebook, and a zynga game no tabs will load at all. I close and reopen firefox numorous (Im talking 7 or 8 times or many more) and shut down the zynga game and still it wont load

    If I have more then a few tabs open such as gmail, facebook, and a zynga game no tabs will load at all. I close and reopen firefox numorous (Im talking 7 or 8 times or many more) and shut down the zynga game and still it wont load the tabs or if it does and I then try to add the game or any other site at all on a tab it causes firefox to stop working (though not close) and I have to restart opening and closing it many times to get it to work at all.

    1st, you will not be able to activate your PPro1.5 on ANY new computer, see next link for the special version you MUST use
    CS2 (and earlier) Activation Server http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
    2nd, you already mentioned Virtual XP, so if a direct install doesn't work, that would be the way to go... or, to just do what SHOULD work from the start, just do Virtual XP

  • My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help?

    My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help I have tried everything I know to do

    Unfortunately this means that there is a problem in the boot sector of your hard drive. It might be indicative of a fundamental corruption in the coding that allows your computer to boot your operating system from your hard drive. I had this problem twice and it resulted in me having to get a new hard drive and restore my data.
    In other words, your computer can't talk to your operating system so you can't access your data.
    Here is my advice: DON'T CALL APPLE TECH SUPPORT though they are kind and usually helpful it will take you an hour just to explain the situation and they will only tell you to do what I'm gonna say here.
    First: Shut down your computer completely
    Two: boot up while holding down the following keys: command, option, p, and r. The computer will reboot 3 times. This solution will likely fail so if you're frustrated skip to the next step.
    Three: Boot up while holding down the option key. Select recovery drive. Select your default language. Select disk utility, click on Macintosh HD, and select "verify and repair volume." Likely the verification will produce some line like "unused node not erased." Or something like that. If anything using the words "node structure" comes up, you need a new hard drive.
    If after verification and repairs you still can't boot I sincerely hope you have apple care because you will need a new hard drive. Set up an appointment to come in to the apple store, they will tell you to go and get data recovery, just ask them to give you the old hard drive. Unless you have an up to date backup in which case you can just restore from that. If you're lucky the only issue is with the boot sector which means that if you ask them to give you the old hard drive, you can buy an enclosure and you have effectively been given a free external hard drive. It still works to store data just not to load an operating system.
    If you have a back up drive bring it to the apple store and they'll do the whole thing right there, it should take around an hour and a half but may take longer.
    Hope this helps, it's annoying but it's your safest bet.
    All the best.

  • I have forgotten my appleID password and the email it is linked to is deactivated, security questions aren't working. This is on my iPhone and iTunes acs so I can't sync with my new computer. How do I merge AppleID accounts and shut down the old one?

    I have forgotten my appleID password and the email it is linked to is deactivated, security questions aren't working. This is on my iPhone and iTunes acs so I can't sync with my new computer. How do I merge AppleID accounts and shut down the old one (when I have no password and the security questions aren't working?)

    You cannot merge Apple ID accounts, that has never been supported.
    You can contact the Apple ID Security folks per the listing in http://support.apple.com/kb/HT5699 and they can help reset security questions and get the account working.

Maybe you are looking for

  • I need to know about date function in Java

    Hi All, Here is my question - I need to subract 18 months from a particular date. How do I do that using Java coding? eg: 09/30/2003 - 18 months = 03/30/2002 I have to to code this in Java in order to use it in one of my application. I would apprecia

  • Can I make a PDF form and submit to CF?

    Hi. I'm wonder that can I make this. I'd like to design a form like Purchase Order sample from LifeCycle Designer. And want to submit it like a POST method to a ColdFusion backend. Think like a HTML form submission. Could it be possible? Or I've to h

  • Two parents one child table scenario

    We have three source tables like this: Employee emp_id(PK) emp_name Department dep_id(PK) dep_name Emp_Dept emp_dept_id(PK) emp_id dep_id We want to use a database sequence to populate the PKs in target. Problem is after we transfer Employee and Depa

  • PSE 13 Contact List

    PSE 13 is not saving my additions, edits or deletions from the contact list un "Share".

  • Material master extension for a particular material

    hi everyone, i got a requirement to add a customized screen for a particular material, i designed the screen and added that by going into spro. the screen is viewable now but for all materials. so could anyone tell me how to make it visible only for