Heavy pixelation when shot changes

Hello,
So I used QT 7 to encode my actor's demo reel. Sorenson 3 codec. It's not bad, but whenever the shot on the video changes, there's a second or so of bad pixelation. What is that? What am I doing wrong?
Appreciate any help. Here's the link:
http://www.kellfilmandvideo.com/500.html
Thanks

I would imagine it is more in the local wiring set up, possibly a loose or dirty connector (coax only)
Check your video signal when the pixelization and audio drops happen - so that you can tell if it's in your local wiring or not.
go to menu > customer support > in home agent > network diagnostic = ok to start.
after it's finished you will get a general message, but if you want technical details you have to hit the info button.
you'll be provided with the following.
Video Signal is OK (snr value:36)      (36 is optimal, it will give you a clean picture with as low as 32)
Video signal is OK (snr level is: GOOD)
local network is Ok ( IP xxx.xxx.xx.x)   <~~not important for broadcast, but important for VOD
External network is OK (IP xx.xxx.xxx.xxx)<~~not important for broadcast, but important for VOD

Similar Messages

I have a brochure I need to print. When viewed on screen it is pixelated, however when I change to presentation view it is fine. I need to print on presentation view. How do I do this?

I have a brochure I need to print. When viewed on screen it is pixelated, however when I change to presentation view it is fine. I need to print on presentation view. How do I do this?

Sounds to me more like you have the Display Performance set on Typical rather than High Quality Display. Unless there is a problem with a missing or out-of-date link, the display in ID has nothing to do with output quality -- all of the image data is used for output.

Heavy Pixelation and No Audio on AMC HD and Fuse HD

I just noticed this tonight when i went to watch my DVR recording of The Walking Dead. I am getting heavy pixelation and no audio on both AMC HD and Fuse HD. I'm not sure when this began, but I watched The Walking Dead last Sunday night just fine, so it didn't start until sometime after that.
Is this something to do with my setup/wiring (somehow, even though nothing has changed since Sunday), or is a problem further up the chain?

I would imagine it is more in the local wiring set up, possibly a loose or dirty connector (coax only)
Check your video signal when the pixelization and audio drops happen - so that you can tell if it's in your local wiring or not.
go to menu > customer support > in home agent > network diagnostic = ok to start.
after it's finished you will get a general message, but if you want technical details you have to hit the info button.
you'll be provided with the following.
Video Signal is OK (snr value:36)      (36 is optimal, it will give you a clean picture with as low as 32)
Video signal is OK (snr level is: GOOD)
local network is Ok ( IP xxx.xxx.xx.x)   <~~not important for broadcast, but important for VOD
External network is OK (IP xx.xxx.xxx.xxx)<~~not important for broadcast, but important for VOD

Display picture in messages totally pixelated when seeing it with yahoo messenger for windows

Hello,
I'm using messages to chat with my yahoo messenger account at work and yahoo messenger for windows at home.
When I log into Yahoo with messages, my yahoo display picture is updated automatically with the one I have choose in messages.
My problem is that this picture is totally pixelated when you see it on yahoo messenger for windows. It seems that Messages is changing its size.
As the size in Yahoo messenger for windows is bigger it appears pixelated!
If I choose no display picture in messages, the one I have choose with yahoo messenger for windows disappear when I'm logging with it.
Is there a way that messages do not update the display picture each time I'm logging to Yahoo?
I suppose that there is no solution to this problem but I wanted to be sure.
Anyway thanks for your help.

HI,
Thanks for the Path.
This does seem to show all the Recents from the Contacts App > My Card, the Login Pic and the Messages Buddy List pic.
I think in Mountain Lion these were either separate items or the .plist that is in the current place listed the app/location the pic was used.
I have looked at the pictures in the folder (.png and thumbnail .tiffs) and the .plist and it does seem to be all the pics I have used in all three places over the last few months.
The Yahoo account is logged in not through IMAgent that FaceTime and Messages use for other Accounts but from the IMServicePluginAgent.
In Mountain Lion this used to list a Buddy Pic server as well as a straightforward login.
Using Little Snitch I am not seeing that in Mavericks.
Seems you may have to change your Pic on a web page for your Yahoo account.
Edit
for the Points
9:22 pm Friday; November 8, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
Message was edited by: Ralph Johns (UK)

Help! INDD PDF file appears pixelated when projected, but not on laptop

Hello, all,
I'm preparing an important presentation and want to ensure that my slides look great when projected at an event next week. I'm concerned because at a practice pitch a couple weeks ago, they appeared pixelated when projected, even though they looked beautiful on my laptop screen. This includes fonts and vector graphics. I had created the slides in InDesign 6 and exported to PDF. I'm posting screen shots of the file settings for each below. Should I have done something differently? Can anyone share best practices for exporting to PDF when the intent is to project the PDF from a laptop? I would really appreciate any advice. Thanks!
Briana
Creative Cloud subcription (InDesign, Illustrator, Photoshop 6 were used)
MacBook Pro, 2.4 GHz Intel Core 2 Duo
OS X 10.7.5
Waiting on technical details of projector

If you're displaying the PDF with Adobe Acrobat or Adobe Reader then any vector content (graphics and text) will scale perfectly; the document setup in InDesign has no bearing other than to set a 4:3 aspect ratio for the pages (PDFs don't measure in pixels). As Rob says there's no getting around the resolution of the projector.
Given how PDFs behave there's no complex 'best practice' guide for on-screen or projected content driven by a desktop computer. You can work in any color space and use any combination of transparency, raster and vector content you wish, then just run Export > Interactive PDF with the default options. If you're displaying via a mobile device it's a good idea to work in RGB, as some PDF-reading apps will mess up CMYK>RGB conversion, and don't bother with any rich media (Flash/video).

Pixelation at bandwidth change while streaming VOD in HLS

Hi,
I have FMS 4.5 installed and I'm doing some tests streaming media via HLS with a STB.
This is my main playlist link: http://lab001.dyndns.org/m3u8/ca-8ms.m3u8
The problem is, when the bandwidth changes during streaming, there's a pixelation.
No matter what I configured in HLSMediaFileDuration (in httpd.conf), and no matter which value I set for KeyFrame Iterval, I always got pixelation at bandwidth change while streaming.
In this article, it is said: "The duration of TS files, in milliseconds. Use a value that is a multiple of the keyframe intervals for the media.". I did try that, but no luck.
For example, when I set HLSMediaFileDuration to 8000 (default), I encodec my media with KeyFrame interval = 4. I also tried different combination but it didn't solve the problem.
I'm using:
Server: FMS 4.5.
Media Encoder: Microsoft Expression Encoder 4 Pro (multiple bit-rates with the same KeyFrame Interval).
Client: AirTies STB and iPad 2.
What am I doing wrong or missing?
I'd appreciate any help.
Thanks,
Wiaam.

I am having this EXACT issue - only I am using an iPhone 6 Plus 64gb. I live in the Chicago metro area, and when I stream using Spotify, iTunes Radio or Pandora, I am having the exact same issue. I can watch the phone go from LTE to 3G to 1x, then to get it back to LTE, I need to put it into Airplane mode and take it out of Airplane mode.

Photoshop CS5 - custom shapes edges pixelated when rotated

After changing my monitor i found that all shapes pixelated when rotated 45 degree, any help?

What do they look like if you view your document at 100% view (actual pixels)?
What operating system?
Do you have Enable Open GL Drawing checked under Prerferences>Performance in photoshop cs5?
Is the monitor the same size and/or the resolution different than the old monitor?

Help! heavy pixelation in idvd

Hi everyone-- I've seen different posts dealing with different aspects of this problem...
Heavy pixelation in my disk -- seen on monitor AND on TV -- the original FCP output does not have this problem.
Here are my project specs:
75 minutes (approx) black and white.
Captured using a Canopus ADVC110
Edited and prepared using FCP 4.5
Burned on iDVD 5.0.1
If choose "performance" (with or without background encoding) then the project size in the media window is 5.0 gigs. If I choose "best quality" it is 2.5 -- Why? -- Note that neither choice affects what the DVD looks like, though it does determine whether I have to create more coasters with either DL or single layer disks. They look the same, however, as I said.
I tried exporting without compression from FCP, and the file is 50 gigs. If I use DV compression it comes out at something like 15. They look the same, largely, on my monitor, and both are highly pixelated on the finished disk.
Obviously, I'm doing something wrong. I really don't like iDVD and will eventually upgrade to something else. But, right now I need to get this project finished.
Any thoughts? Please help -- this is driving me crazy.
g5 Mac OS X (10.4.7)

thanks... this is helpful.
ok, then, so here is a question: is best performance BETTER than best quality? i was assuming that best QUALITY meant better quality image. is that not so?
i noticed that when i choose Performance, it does the encoding in the background. then it seems to encode again. At first, I thought that was why it was so pixelated, that it was a second generation processing.
choosing QUALITY did not allow for background encoding, and i thought fine: i can live with a long wait for a once-compressed version.
please advise.
in the meantime, i will try making a disk image and burning that in disk burning tool.
if the problem can clearly be isolated as iDVD, then i'm happy to bite my lip and go buy more from apple.
as far as disk space, i had this g5 dual shipped with 2gigs of ram and an additional 2 400g drives== so it's not space, though i will make more room on the system drive... i should be able to burn DL disks because it says I can-- and they work as data DVDs okay.
thanks for your help

Time Quotas Updation when EE change from one grp to another group

Hi Experts,
Actually I have Two Quotas "A and B " in my Project will be updated based on EE Subgrp on monthly bases
when EE change EE subgrp in the mid of Month will new quota get generated or not ?
if Yes, how the process of Quota Updation please let me konw.
Thanks
Sreeni

Hi
Please make your Question more clear and Try to generate absence Quota through the Tcode pt_qta00 in Test mode and check the result.
Regards
Suresh.V

LTA is getting Double when EE changes Department /Designation in mid of the

Hi Sapiants,
LTA amount is getting Double when EE changes Department /Designation in mid of the month. what is the reason behind this problem.
Regards
vinmax

Dear Delik,
Now double appearance of LTA amount is gone by assigning the spec . to Pr.Cl. - 06 .Your answer helped buddy in this egard. but a new problem is coming. system is populaating some amount with a wagetype. though it is not part of IT 0008.
Thanx
Vinmax
Edited by: kvin kvin on Jul 25, 2008 12:28 PM
Edited by: kvin kvin on Jul 25, 2008 12:29 PM

Why is it that when I change the contacts on my phone, it changes them on my mom and dad's as well?

My family and I recently got iPhones for Christmas. One for my dad, one for my mom, and one for me. We also have an iPad 2. They are all hooked up to iCloud via one username. When we got the phones, we had trouble transferring our contacts from our old verizon phones to our new apple ones but we eventually got the contacts we needed. At first, my mom's phone was not connected to the iCloud account shared by the rest of us and the iPad. She wanted the calendar from the iPad so I deleted the account on her phone and added the iCloud account that the iPad was using. All was fine until my dad and I realized that our contacts were wiped from our phones and replaced with my mom's. I then started painstakingly deleted my moms contacts and replacing them on my own on my phone. However, contacts were being deleted from my mom and dad's phone at the same time. It's almost like the three phones are constantly synching with each other. It would be ideal if we could get all of our contacts back the way they were before my mom changed her account but we would settle for this constant synching to stop. Please give us some direction here, we are new to this. Thanks in advance!

Why is it that when I change the contacts on my phone, it changes them on my mom and dad's as well?
Because, as you said "They are all hooked up to iCloud via one username. ". That is exactly what iCloud does.
You need independent iCloud accounts for each person to maintain independent contact lists.

TV goes black when i change the channel?

On my Toshiba LCD TV quite frequently (at least once a night) the screen will go black when I change the channel (via cable box) or if I change the input. I then have to turn the TV off then back on to get the picture back.

I have the same problem and it is frustrating. I called the cable company who told me to unplug everything from the wall for 1 minute and the plugit back in. "Duh" Unfortunately I had to do this every few hours. I called them back an they performed a reset from their end. It has worked fine ever since.
Mark
"Faith is the ability to see the invisible, believe in the incredible, and achieve the impossible".
Medical Billing And Coding Jobs

Problem with WHEN-CHECKBOX-CHANGED and ON-POPULATE-DETAILS

I have a detail block with a relationship set up to a second block. In my first block, if I cause an error but the next action I take is to press a checkbox on another record, my error will display and the raise form trigger failure is triggered but the checkbox changes it's value and the cursor is displayed on the record with the error. I didn't want the checkbox to change if an error occurred. I tracked this through the trace and saw the on-populate-details is fired between the error and the when-checkbox-changed trigger. I went through debug and saw because of the erorr, the system will do a 'return' back to the sending action. I beleive this return is causing the when-checkbox-changed to fire. I'm just guessing here. I tried a similar action on another form without a relationship set up. That would eliminate the on-populate-details trigger. When I did a similar error, I got exactly what I was looking for. I caused the error but pressed the checkbox on another record. The error displayed but the checkbox did not change and the cursor returned to the error record. I need the record to have this relationship. Consequently, I need the on-populate-details trigger. Can anyone think of a solution? I'm currently on Forms 6I. We are going to forms 10G in the next few months. But I really need a solution on my current set up. Thanks.

The getNextDatabankRecord() call is at the beginning of my run code. I use one step just for this line code.
Code :
public void run() throws Exception {
          beginStep("CHARGEMENT DES DONNEES SUIVANTES");
               info("Chargement des prochaines données...");
               getDatabank("NouvellesIA").getNextDatabankRecord();
          endStep();
Stop the user after this step and goto the finish section should not be a problem...
If I use the "When out of records" option, does it jump directly to the finish section ?
Thanks,
Benoit.

How can I retrieve emails that were deleted off my iPhone 4s when I changed the password to my email acccount?

I changed the password to my email account and when I changed it in my phone all of my emails were deleted Is there any way to retrieve them? They are in the server and I can access them via Outlook just not on my iPhone or iPad.

They won't be in icloud, since the only thing that would contain pictures are backups. But they were deleted before you signed up for icloud, so forget that. The only other thing to check is you computer. Users are always advised to sync photos to computers for archiving. If you did that, you should be able to find them there. But without any backups or copies of them, then they are history.
And no, you can't look at pictures in icloud.

I recently changed my iCloud account because someone stole my last phone and changed all my passwords for both my iCloud and emails account. So when I changed my account I accedently erased all my contacts is there anything I can do? (It wasn't backup)

I recently changed my iCloud account because someone stole my last phone and changed all my passwords for both my iCloud and emails account. So when I changed my account I accedently erased all my contacts is there anything I can do? (It wasn't backup)

I'd say your best bet is to try to regain access to your old account. Call 1-800-MY-APPLE, and ask to talk to the account security team. Hopefully they can verify you are the account owner, and then reset the password for you.

Heavy pixelation when shot changes

Similar Messages

Maybe you are looking for