Hebrew Fonts in Illustrator CS5

Why can't see my hebrew fonts in Illustrator CS5 but see them in InDesign and Microsoft Word? Are there settings I should use to turn them on? Would appreciate any and all help. Thanks!

hi mike,
i already had enable missing glyph protection enabled. and for some reason, the hebrew is now available. not sure why but not complaining. yesterday the hebrew input source was greyed out but today it is enabled.
thanks for the help!
all the best,
deborah
deborah

Similar Messages

I want to use Hebrew fonts in Illustrator CC 2014

Hello - I have installed Illustrator CC 2014 in both the English and English/Hebrew versions and still can't seem to get my Hebrew fonts to work. No matter what I try, any verbiage I type is still showing as roman characters. Any tips or advice?

I also need larger text in tabs.

Problem with embedding fonts in Illustrator CS5

I have just installed Illustrator CS5, and have tested creating a PDF document based on one of my existing files, as well as a new file.
When I open these PDF documents in Adobe Acrobat Pro 9, I am told that Acrobat cannot access one of the embedded fonts (Korinna BT).
I have had no issues with embedding this font in Illustrator CS4, and (strangely), when I open these files in other PDF viewers (Preview and PDFPenPro), they report no issues.
Has anyone else experienced this issue?
I have removed and reinstalled the font in question, and tested/verified that the font is OK - but still not joy.
Regards
Jeremy

The error message I get is:
"Cannot extract the embedded font 'MVZTIW+KorinnaITCbyBT-Regular'. Some characters may not display or print correctly."
When I check the fonts in the PDF in "Document Properties" in Adobe Acrobat the following is shown:
"KorinnaITCbyBT-Regular
     Type: TrueType
     Encoding: Ansi
     Actual Font: Adobe Serif MM
     Actual Font Type: Type 1"
It seems that Illustrator is adding some strange "code" ('MVZTIW') to the beginning of the font, which means the actual font can't be found and extracted.

Can I use Hebrew fonts in Illustrator CS3?

Can I use Hebrew fonts, which are loaded and enabled in Illustrator, CS3? Although they are listed in the Character palette, the Hebrew fonts appear at the bottom of the list enclosed in < > brackets. When I choose such a Hebrew font, the letters appear as blank rectangles in my document? Font Book says they are valid Truetype fonts. What's wrong?
Thanks for any help.

i found this info from this link: http://forums.adobe.com/message/3466307. The user who asked this question stats this solution worked for them.
First in Language and text preferences in the system preferences select Hebrew as the input method.
The in Illustrator click the text tool in your document or drag to create a text frame.
While the cursor is active select a hebrew font
then go to the menu bar for the finder and where there is the American Flag pull it down and select hebrew
now go back to the document and start typing.
Remember if you do not have the ME version you have to have it flush right and type backwards.

How do you change the default font in Illustrator CS5?

I have upgraded my Illustrator to CS5 and my default font has changed to a strange font. In Photoshop and InDesign, I was told that all you have to do is change the font in the Character menu to the font that you wish to be set as "default" and it will be the font that you always start with.
NOTE: Does this mean that if I use a different font in a different document, the font will stay that font unless I change it back? Isn't there a way to make a particular font the font that I would always what I start with? All this setup means, is that the "default font" will always be whatever the last font that was being used was. There has to be a way to make a default font that I will always start with no matter what the last font that was being used was.
Illustrator gives you no option on font type, unless a file is open. Then, if you change the font and close the file, next time you start a file, it will go back to what is was to begin with. There has to be a way to change the default font for all of these programs to where the font always stays the same unless you change it. Mine is just set to use a weird font that I would probably never use.
I just never thought it would be that big of a deal to change default settings for the font.

Okay, I basically made three different documents and I made sure that I had everything chosen in each. I then saved the three to that file and they now appear in the list:
Settings for all 3:
72psi, 150psi and 300psi
Rulers Visable
Times New Roman
12pt
14.4pt
I then went in and started three new documents. I used the three different New Document Profile's that I made and they all had Rulers, their sizes were correct, but the font stayed Myriad Pro. Did I miss anything? And, Yes, I did change the font and the setting before I saved them in the New Document Profile.
One other thing, I did create a file in the folder, but it was spelled incorrectly. I then went into the folder, erased it and made a second. Then, I went to open it in IllustratorCS5 and it was still listed. I went to the file and it wasn't there anymore, but it was still listed in the New Document Profile. Is there a way to get it off of the list or is all I have to do is restart Illustrator?

Missing Fonts in Illustrator CS5

In the font pull down menu I have fonts displayed with "< >" symbols on the sides. I assume this means that illustrator thinks the font is missing or it has replaced the font or both? The font is loaded in Suitcase Fusion 3 (the only font management software on my MAC Pro) and it is activated. So why does these < > symbols still appear? How can I get rid of them? What is the font issue?

unclefester67 wrote:
so the "< >" symbols around the font name is actually just a way of telling that they are "Symbol" fonts. They are in fact not missing or have been replaced?
The bottommost font is not a Symbol font. I think it just indicates that the name of the font is not in that font itself (all other font names are), because the font does not contain Latin characters.
Missing fonts show up in square brackets [Like This] in InDesign, at the very top of the font list, and I think it's the same for Illy.

MBP Retina Display Font Crash Illustrator CS5

just purchased a new mac book pro with retina display. Everytime I open my illustrator and try to scroll through the font list it crashes. This is a brand new install and a brand new computer - I haven't installed any fonts or brought any files over from my desktop mac - so font should not be an issue. Is Adobe working on a fix? will this issue happen still if I upgrade to 6? I'm not willing to spend the monthly fee unless it will be a guarantee fix.
Thanks.

Take it back and get a refund. What are you waiting for, your new Mac does not work correctly.

Illustrator CS5.1 crashes when changing fonts

Hoping someone can please help!! Every time I try to change fonts in Illustrator CS5.1, without fail it crashes. I'm on a macbook pro with retina display, OSX 10.9.4 and I have tried uninstalling then reinstalling the program and downloading the Adobe patches but my computer won't accept them. I've tried deleting the Illustrator preferences as well but nothing seems to work. PLEASE HELP?!!

dezine,
In serious cases requiring reinstallation, you should also use the Cleaner Tool, see 6) below.
But it may be something with fonts/font caches, see Items 1) and 11) in the link in 5) below; these may be the most probable causes.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Illustrator CS5 just won't stay open

I have looked all over the forums and elsewhere to find a solution to this, but so far, I haven't been able to resolve it. I noticed many other people have had this problem, and it was resolved in many ways, but none of those ways worked for me. This is the trial downloaded from adobe.
My info:
Windows 7 Home Premium, 64-bit
4 gb ram
AMD athlon IIX2 Processor
Both Photoshop and Illustrator load and run very fast on my laptop, so performance really isn't an issue. I've never had this problem with photoshop.
Illustrator cs5 worked fine since last night. After working on a file, I restarted and Illustrator loads and opens, but doesn't stay open. It closes about 3-5 seconds after it opens, so I can only assume it crashed without any error message.
The starting logo never completely loads all of the font list. It usually gets to about 80% and then opens and closes automatically.
So far, i've tried:
uninstalling illustrator and reinstalling it -- did this 3 times
using the cleaning tool to completely remove cs5 and reinstall it
deleting the illustrator profile
temporarily removing the fonts in C:/Windows/Fonts ... some fonts could not be moved due to the fact they were in use/system fonts
updating illustrator CS5 to "fix" the bugs ... it doesn't seem to improve anything
Looking in the event viewer for errors, I found this:
Faulting application name: Illustrator.exe, version: 15.0.1.399, time stamp: 0x4c57c1d9
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x6ec08639
Faulting process id: 0xa58
Faulting application start time: 0x01cb73dd36ec5614
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Illustrator CS5\Support Files\Contents\Windows\Illustrator.exe
Faulting module path: unknown
Report Id: 7b1d928a-dfd0-11df-ab15-705ab6e1e86d
not sure if any of that has to do with why it crashes.
nothing worked. The strange thing is, if I open an .EPS or .AI file with illustrator, illustrator will stay open as long as my mouse is over a context menu. If i'm quick enough, I can open .EPS files in illustrator and then save them as .AI files, but as soon as I close the menu, illustrator quits.
So, this is incredibly fustrating. I have to do a vector project in illustrator and obviously can't ... i've been quite desperate in trying to find other vector programs, but i'd rather not need to learn a new program when I can use one I already have.
Does anyone know how to fix illustrator and keep it open?   how do I temporarily remove all the fonts from illustrator? I am assuming that because it never completely loads the font list at startup, its a font issue. But I haven't installed or modified any new fonts lately.
Any help will be appreciated. Thanks.
Message was edited by: MissaMoonlight
Message was edited by: MissaMoonlight
Message was edited by: MissaMoonlight

I did as you suggested and removed my prefererences and workspaces. It still closes.
Also, I do not use adobe acrobat, it isn't installed on my computer. I have no issues hovering over the menus in AI -- hovering over the menus and opening them is the only thing that keeps AI open. As soon as I take my mouse off the menu, AI closes.
The only way to keep AI open is to interact with the menus. Any dialog box keeps it open. As soon as you close the menu or dialog, AI closes as well.
Does this
Faulting application name: Illustrator.exe, version: 15.0.1.399, time stamp: 0x4c57c1d9
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x6ec08639
Faulting process id: 0xa58
Faulting application start time: 0x01cb73dd36ec5614
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Illustrator CS5\Support Files\Contents\Windows\Illustrator.exe
Faulting module path: unknown
Report Id: 7b1d928a-dfd0-11df-ab15-705ab6e1e86d
or this
Log Name:      Application
Source:        Application Error
Date:          10/25/2010 4:55:12 PM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      MissM-MissM-PC
Description:
Faulting application name: Illustrator.exe, version: 15.0.1.399, time stamp: 0x4c57c1d9
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x6d7085eb
Faulting process id: 0x824
Faulting application start time: 0x01cb7486e3b5108e
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Illustrator CS5\Support Files\Contents\Windows\Illustrator.exe
Faulting module path: unknown
Report Id: 28887847-e07a-11df-aee0-705ab6e1e86d
explain anything?

Opentype not working in Illustrator CS5

I am unable to insert alternate characters for Opentype fonts in Illustrator CS5. I never had any problem with them in earlier CS versions, where I could simply double click a character in the Glyph window to insert an alternate style. Now, in CS5, sometimes that works, but usually it doesn't. Help please!

I may have answered my own question by finding an updater that supposedly fixes problems with the glyph window.

I am using Illustrator CS5. I am using a certain font and when I make a selection to use one of the letter options or a glyph, it does not take my selection; in other words, nothing changes.

I am using Illustrator CS5. I am using a certain font and when I make a selection to use one of the letter options or a glyph, it does not take my selection; in other words, nothing changes.

What font? What system? What Glyph? What language settings? Could be anything. Either way, ask in the AI forum. You'll get quicker answers there - if you provide all the required info.
Mylenium

Why are my fonts in different groups in Illustrator CS5?

I am running Illustrator CS5 on a Laptop PC. I am constantly installing new fonts to work on customer projects...
I have noticed that sometimes the fonts appear in the font list in alphabetical order, and sometimes they appear either towards the top or bottom (not in order), or they are in a completely separate grouping at the bottom of the list. Is there any fix for this? I'd prefer that they all be in Alphabetical order if possible...
Thanks in advance for any help,
Scott. F.

Check the font prefs and the various text-cnetric panels' options. this happenes when you choose to group by English name, but the font is encoded for a different region/ uses a different set of characters.
Mylenium

Working in Adobe Illustrator CS5. Fonts are shown as Font type (i.e. True Type, Adobe, OpenFace icons) with no name unless I high light an font icon. This does not happen in Photoshop or InDesign. Help!

Illustrator CS5 for Mac. OS Yosemite 10.10.1 Font Drop Down show only font type icon unless I drag my cursor over an icon to reveal the font name and style. Fonts works great in InDesign and Photoshop.

j,
I believe this may solve it:
Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
It was first presented in this post #15 by TheUlser:
https://forums.adobe.com/message/6854594#6854594

Missing Fonts in Adobe Illustrator CS5 Version 15.1.0 Agenda Bold and Agenda Black

Hi,
We are using Adobe Illustrator CS5 Version 15.1.0 to re-create Points of Sales (PoS) that our 3rd party company sends us. But when we open the PoS from the 3rd Party we get a message saying we are missing 2 fonts. The names of these are Agenda Bold and Agenda Black. Are these Fonts from a newer version of Illustrator or are we able to purchase/download these?
Any help would be much appreciated!!
Thanks,

These are not standard system or Adobe fonts. You will have to buy them from whatever type foundry that produces them.
Mylenium

Font issue occurs when creating pdf file from Illustrator CS5.

I have some design files which are created in Illustrator CS5 and I made them as a pdf file using InDesign CS5 while I open the pdf file in Acrobat Pro 9 I have no issue with the file but my client is using Acrobat Pro 7 while they open the pdf file in Acrobat pro 7 junk characters(rectangular boxes) are appearing in it. Can anyone please look in to this and confirm is this a version bug or something else? It would be much appreciated if some give any idea to get rid of this issue.

Aside from the PDF version, but to follow-up to what David is getting at, you are likelythe fonts are not embedding. Because they reside on your system you see the PDF as it should be. Your client likely does not have the fonts installed.
Make sure your ID export of the document is including the fonts. If that still does not work, check to make certain the fonts you are using allow them to be embedded.
If all else fails, seeing how this PDF is for client review (I assume) have the PDF settings set to convert type to outlines. This gets you past the current dilemma as you figure out the cause.
Take care, Mike

Hebrew Fonts in Illustrator CS5

Similar Messages

Maybe you are looking for