Hebrew Menus Gone After Firmware Update in my 6233

why the hebrew support menus gone after updating to a newer version of the firmware???
what sould i do to restore it back?
is it possible?

The only thing you can do is take it to a nokia care centre. They are the only ones that will be able to fix it.

Similar Messages

Spore gone after firmware update

About a month ago I got a message suggesting software update for my X6. After the update I no longer have Spore on my device! How can I get it back?

in future follow this guide about updating
http://www.google.ie/url?sa=t&source=web&ct=res&cd=1&ved=0CBMQFjAA&url=http%3A%2F%2Feurope.nokia.com...
but im afraid to say this game is gone for good so look on the web
you can find them on the web or something similar
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Airport Extreme 802.11n gone after firmware update

Started Airport Utility earlier today, just to check a password. An Apple window came up offering new firmware, 7.1.1, I think. I usually accept these offers without thought, so I let the update run. Now Airport Utility cannot detect the Airport Extreme (802.11n). The support page says to check for software up dates, but there were none.
What next?

Hello pmacdd. Welcome to the Apple Discussions!
First, try quitting, and then restarting the AirPort Utility, and then, try accessing the AEBSn.
If this doesn't solve the problem, then try connecting your computer directly, using an Ethernet cable, to one of the LAN ports of the AEBSn and then try accessing the device.

After firmware update to V2.0.03, the web UI dos not look right. (WRT160 V2)

Hi
After firmware update from V2.0.01 to V2.0.03, the web UI dos not look right.
I can't see menus, just version number and the basic setup page.
Router Linksys WRT160 v2.
Allan

Hi
Thanks for the reply.
I't works ok now.
Thanks again.
Allan

Problems after firmware update 52.0.007

Hi,
I got my phone back after the shop fixed a problem and updated the firmware to the latest version 52.0.007.
But now I have following problems:
I can't get the calendar anymore to show up on the homescreen, even after checking the checkbox to do so
The Radio app. is gone
Does anyone has a solution for this?
Iwan

It may sound crazy but sometimes you need to "hard reset" device after firmware update (beware all data erased) by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by yourself). Sometimes UDP = User Data Prersevation feature of 5800XM can carry over corrupt entries when updating.
Happy to have helped forum with a Support Ratio = 42.5

Data recovery after firmware update

Hi guys,
does anyone know it it is possible to recover data after firmware update in N8? some data are preserved (videos) and some are lost (photos).
thx.

if you didn't backup them, there is no way to recover them
Greece Nokia X6 RM-559 v40.0.002

3014 error i can't restore ipad after firmware update attempt

3014 error i can't restore ipad after firmware update attempt

See this thread with the same question.
https://discussions.apple.com/thread/5045573?tstart=0

Restoring after firmware update - Ways :)

Hi All,
Nowadays we are receiving quite a few complaints that customers are unable to restore the application after updating their firmware. I would like all to discuss to come up with some ways to restore their applications after firmware update.
Before updating firmware
Customer can backup his phone using Nokia PC Suite's Content Copier application.
He can store his Contacts and Messages using Nokia Communication Centre as .csv file or .txt file.
For his Contacts he can sync with pc suite supported sync applications.
Messages he can store in Memory card and he can make a backup of memory card in PC.
If he is using Nokia PC Suite for his Multimedia items he can use Image Store if he is using Nokia PC Suite or Nokia Photos if he is using Nokia OVI Suite.
For Music he can use Nokia Music Manager or Nokia Music.
Once after updating his firmware, if he is unable to restore he can get those from above said applications.
If his calendar entries are not restored(as in case of some of Nokia e 71s and Nokia N 95/95 8 GBs), for God's sake if he has got one more similar device(or device having switch application on phone), he can restore the backup file to another phone having switch application, then he can transfer his data (Contacts, Calenders etc ) to his original phone
Dear Forum members, if you have got any other work around please let me know regarding the same, which will help our customers

Hi,
If you have issue in Nokia PC Suites, [subject to your phone's compatibility with Nokia OVI Suite 2.0.0.10 ],
you can install Nokia OVI Suite 2.0.0.10 and check if you can take backup and restore it later.
Also i would suggest to use USB for taking backup, since it will be faster than Bluetooth. Also you can select one category at one time(say backup contacts alone, then Calendar, then messages etc and so on ....)
Its better to skip memory card backup while backup-ing other Phone data for faster backup. Memory card backup can be done separtely(since it wont be affetcted while updating firmware, users can safely remove memory card while updating firmware)
Nowadays though recent phones has got UDP(User Data Prevention i.e., even if you update your phone's firmware, your data wont get erased ), still it is recommended to backup your phone data.
Hope this could help
I welcome our experts to add more details related to this topic.

Ovi Maps 3 don´t start after firmware update (6220...

Hello!
a few days ago I installed ovi maps 3 on my nokia 6220c and it works well. Later I updated the firmware from version 03.06 to 05.15.
After firmware update ovi maps don´t start-> "Cannot open application. Install latest version from nokia.com/maps."
But Nokia Map Updater says, there are no updates for my maps.
What´s wrong?
Can I reinstall Ovi Maps 3? Or is it possible to install Ovi Maps 3 new?
thanks

Hello!
The Map Updater said: "there is no update for your phone" ...because maps 3 is already installed.
But in the meantime I have found a solution!!
I downloaded maps 2.0 from the German nokia page and installed it. Later I started Map Updater and could update to Maps 3 and now it works!!!
I think the problem was: I first updated to Maps 3 and later updated the firmware. There was any older version of fixes included in the firmware update, so Maps 3 was damaged...
thanks
sorry for my bad English

Airport no longer working after firmware update

Before i get to my question, i think that it is necessary to give a bit of background as to why i have set my network up the way i have.
I recently moved in with my girlfriend and brought my broadband package with me as i would have to pay a fee to cancel my contract within the contract period.
This would be all well and good except that in the new location, the service provider can only supply broadband via an ADSL phone line (provided by a seperate telephone company) furthermore they (Virgin Media - i'm gonna name names) provide a cheap USB only modem - which in turn is only compatible with PPC Macs.
Fine for me, but not so great for my girlfriend who has an Intel Mac Mini and not so great for my new Airport Extreme which of course requires a modem with an ethernet connection.
Bearing in mind that it's just after Christmas and i can't afford to just run out and buy an ethernet modem or change my ISP - i thought that i would try something out.
With the USB modem connected to my old PPC G4 i then connected the ethernet cable (that i had connecting our two Macs allowing them to share the internet connection) - from my G4 to the WAN port on the Airport...
Now i'm a real networking newbie so i was a little suprised when suddenly and effortlessly i had created a wireless network that the Mac Mini and our iPod Touches could see and use. I set up security etc and all was well and good...for two days.
Then Airport received a firmware update and now it doesn't work and resetting the Airport doesn't help.
So now i have to get my hands dirty and like i say, i know jack about networks or the terminology.
With this configuration - and obviously we know that it can work (somehow!)
should i be in bridge mode or sharing a single IP address? and just how am i connecting to the internet. Static IP address/DHCP - PPPoE? I know what these abbreviations stand for but i don't know what they mean.
In the course of 'playing around' with the settings i have seen a message saying that Airport has an invalid I.P. address - why is it invalid and is that only because of something that i have changed or is that the route of the problem?
All the machines can see each other and the only clue i can provide is this log extract.
Jan 19 01:05:31 Severity:5 Initialized (firmware 7.2.1).
Jan 19 01:05:34 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
Jan 19 01:05:34 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:05:34 Severity:5 Rotated TKIP group key.
Jan 19 01:05:42 Severity:5 (WAN) link state is Up.
Jan 19 01:05:49 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:05:54 Severity:5 Associated with station 00:1d:4f:e3:87:17
Jan 19 01:05:54 Severity:5 Installed unicast CCMP key for supplicant 00:1d:4f:e3:87:17
Jan 19 01:06:04 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:06:19 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:06:19 Severity:5 Connection accepted from fe80::203:93ff:fe77:a4b0%vlan1/49186.
Jan 19 01:06:34 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:06:49 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:07:04 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:07:08 Severity:5 Connection accepted from fe80::203:93ff:fe77:a4b0%vlan1/49187.
Jan 19 01:07:09 Severity:5 Configuration updated.
Jan 19 01:07:09 Severity:5 unloading current configuration.
Jan 19 01:07:17 Severity:5 Deauthenticating with station
...and so on.
I'm hoping that some networking guru is reading this and can provide me with a few pointers.
Can anyone help? I've been struggling with this for days now.
Thanks in advance.
Steve.

Your setup is convoluted, but it should work. A few comments:
1. The base station should be configured to get an IP address using DHCP, which it will get from your PPC which (with internet connection sharing turned on) is now acting as a DHCP server.
2. The base station should be configured in bridge mode, since your PPC (with intenet connection sharing turned on) is now acting as a router.
3. I suggest you should turn off the network firewall on the PPC as long as your are running this sort of setup. Not ideal, but it will prevent all sorts of connectivity problems between the internet and everything downstream of your PPC's ethernet port.

OfficeJet Pro 8620e ADF jam error after firmware update

After installing the latest firmware update from the printer's touchscreen, the printer restarts and now has an error that says "Original is jammed in the Automatic Document Feeder (ADF). Open the ADF cover, remove and reload the original, then try again."
I've gone through all of the steps for clearing an ADF jam, but the notice is persistant. There is nothing (and wasn't before the upgrade) in the ADF at all. Since this coincided with the firmware update, my suspiscion is that the firmware didn't install properly or something. What do I do from here?

Thanks CribDesigner for a fast response. I finaly called HP Tech Support and they are saying ....they will replace the unit.

Intel Mini has problem with Mail/internet after firmware update (0.1)

Hello there.
I'm not sure, but I think my Intel Mini has gone bonkers after a firmware update (Mac mini-SMC-firmware-updater (1.0)
What happend is, that connecting to (both of) my two Gmail and Tiscali accounts is not working anymore. (no connection through gate 995)
I did not change anything in the accountsetup.
But now I notice that even my torrents (oops) can't connect anymore.
I think this all took place after the firmware update.
On Dutch sites I do not seem to get any useable answers, so I thought it be wise to go a bit more international.
Could anyone help me out on this one?
Cheers.
Marco

Wizzard,
Having the same problem here. After updating the firmware the wireless connection to the network is unstable. After rebooting the laptop most of the time I get "Low or no connectivity" message. Sometimes it connects and dies after a few minutes. And sometimes it connects and stays connected until shut down.
What do you mean by "u have to reset it for 30 seconds and then reconfigure it"? Do you mean you actually have to reset the router to default settings and reconfigure, or just power down and bring it back up?
Thanks,
Stas

Lost Contacts After Firmware Update

Hi,
I'm after a bit of help if anyone has any advice. I flashed my N900 this weekend with the latest firmware update (it was Vodofone specific so had to flash it to the latest UK version). I restored the backup after completing the firmware update and everything was great. Hooked it up to PC Suite, ran the sync and it matched all 300 contacts.
Last night I tried to edit a contact detail and it kept coming up with an "internal error" message. I managed to do it by chaging the detail on my PC and syncing the contacts. But today, when I looked for a contact my whole contacts list is gone! It's wierd because my recent call history still shown names, but my contacts list is empty. I synced my phone when I got home from work, but Nokia PC Sync completes the sync but I still don't see the contacts on my phone. All the contacts are on the PC still.
How can I fix this? Any help will be much appreciated. Thanks.

No, none were on the sim card. I ran the backup before the firmware flash and then restored after the flash. That was fine for a couple of days, but now I have no contacts showing in my contacts list.
When connected to PC Suite I can see all of the contacts from the PC, but when I look on the phone the list is empty. This is why the sync isn't doing anything because the PC can still see all of the contacts.

Acer aspire 5560g Failing to boot after Firmware update

Hey guys, So i recently upgraded my Aspire 5560g to Windows 8.1. I liked it but it seemed to have lost my drivers in the process (my track pad scrolling didnt work and my Dolby audio origram was gone). I went to for the drivers and decided to start with a firmware upgrade (9545 for hard disk performance). After the computer rebooted, I entered the dreaded Windows 8.1 boot loop. It would say "Your PC ran into problems..." with the bluescreen, then turn off. Then it would attempt the Automatic repair, and fail again, then restart the cycle. I wasn't able to even get into my BIOS until I cleared my CMOS, now at least I can get into BIOS. I created a bootable USB for Windows in hopes I could do a clean install, but even when trying to boot from a USB I get the blue Windows 8 screen, "Your PC ran into problems..."
Is there a way I can undo the firmware update, it seems like the culprit, doesn't it? Any help appreciated. Thanks EDIT: I've read that the Windows boot loop may be caused by outdated drivers. Think this could be the problem after I did the firmware update? How can I install the drivers without being able to boot into Windows? Thanks

Okay, I tried each stick at a time in both slots with the same results. Windows blue screened on both the HDD and the bootable USB. Isn't it too much of a coincidence that it started acting up after the firmware update?
To be clear, it was a firmware update for the BIOS. The page is here for the Aspire 5560G: http://us.acer.com/ac/en/US/content/drivers I am open to more suggestions, I'd really love to get this working again after dropping the $ on Windows 8

Can't open Email Settings after firmware updated a...

Hi,
I've upgrated my E71 with new 3.00 firmware yesterday and then restored phone memory from saved backup (yes, restoring is still a great pain for Nokia phones owners - you know, not all the software installed restores and so on, but that's another question).
Before this upgrade I had MfE and Nokia Email installed and one IMAP mailbox was set up in standard Messaging application. After restoring from backup Nokia Email was missing (backup problems I mentioned above) but I've reinstalled it successfully. MfE and Messaging mailbox also worked okay.
But today suddenly I discovered that when I try to open Settings / Email menu item at Messaging app, this app crashes silently. Strange, but when I'm accessing Email Settings menu item being at mailbox tab, I can see this mailbox settings. but when I try to enter global email settings for all mailboxes from the app main menu, application crashes.
I tried to add another mailbox using Settings Wizard - and it worked, additional mailbox appeared in Messaging app. But all the same with it - no access to global Settings / Email menu but works okay when I open Email Settings directly from mailbox tab.
The thing is that I need to remove mailboxes from Messaging App and it can be done through this unreachable global Settings / Email menu only.
Another detail - when I change storage from phone memory to memory card in Settings / Other menu, my mailboxes disappear and the Settings / Email menu becomes accessible. And when I change storage back to phone memory, my two mailboxes are back again (and functional, as before), but when I try to open Settings / Email menu app crashes.
Please advise, because I really have no idea what to do. I assume that there must be a way to remove mailboxes manually, but what is it?
Regards, Yuriy.

Well, the problem gone after I deleted MfE profile (I don't need it right now). This Settings menu is accessible again. Anyway, it was very strange and I can't predict if I will face it again after I add another MfE profile.

Hebrew Menus Gone After Firmware Update in my 6233

Similar Messages

Maybe you are looking for