Hebrew problem when saving reports

Hi,
There are two users in the same department who have the ability to save reports. The reports are saved in Plus and are in Hebrew.
One of them has no problem while the other has the problem whereby the Hebrew in the parameters and titles are all upside down question marks. They basically are saving the same reports so it is not a problem of a specific report.
I tried changing the language icon in the computer to Hebrew to see if that would help, but it doesn't.
Any suggestions?
Thanks.
Leah

The User does not have the time today, but tomorrow I will check the User's Regional and Language Options. Maybe that is the source of the problem.
I will update the forum as to the results. If that is not the problem and there are no other suggestions, I will open a Service Request at Metalink.
Leah

Similar Messages

Problem when saving business partner on creation or changing

When i create a business partner in fmcac1 it is taking an eternity when saving. i am also encountering the same problem when saving changes in transaction fmcac2. its hanging when i click the save button but if i terminate the job the changes woul have been made. what might be causing the problem.
When i terminate the process am getting the message as shown below
Dev: SAP System message
Panic: Unrecoverable errors occured

well there are really many possibilities for that.
have you once waited, if the task will finish?
if it does finish i would suggest to do a SQL-Trace with TA ST05.
If this is possible, the performance trace will show you quite by detail where your process time is beeing used.
To find out why so much time is used in that position then is another thing.
But once you got the problem identified you should be able to exlude some reasons like (inperformant selects or such).

Problem in saving report as .txt file through IE

We have a requirement to save the report generated as HTML as text file(.txt) in IE. The report generated shows properly on the page, but when saved as text file the records trucated or line feed is added into records and file is distored. If I open the report in Netscape and save it, no problem of line feed or truncatation. Can anyone tell me how to solve this.
We gave the following as query parameter to report server
desformat=html&destype=cache. If I use the other option desformat=delimited&CELLWRAPPER=,&destype=cache, the report is repeating the column name in all the records(rows).
Can anyone tell me urgently how to save the report (.CSV or delimited) in the text file.
Regards
Arun
[email protected]

Hi Subraj,
Thanks for the answer.
We are moving to Oracle 9iAS Release 2, does this patch inbuilt or for that also we need to install the patch separetly.
Regards
Arun

Problem when saving form in web dynpro abap application in se80

Hi,
I am trying to develop an adobe application. When I save the form which i have designed.
I get the "error" unable to convert data and the transaction is terminated.
I dont have any idea why.
Help
Thanks,
Harish

Hi
Are you getting the problem while saving the Adobe form or while saving the webdynpro application.
Could you please elaborate your problem.
Regards
Naresh

Problem when saving the outline

Hello:
We're working with Essbase 9.3.1.
When saving an outline with EAS, the message windows "Starting save of outline" appears and it never close (even if the modification is as simple as adding an alias or an UDA). We've found that If we make Ctrl+Alt+Supr and press cancel in the client machine, the message disappear inmediately. So, it seems a Java problem. Does anyone knows any solution for this issue?
Thanks in advance and regards,
Joaquin Castellano

Hi,
I take it you are accessing EAS through the web client, if you it will probably down to using the 1.6 JRE.
You can install the 1.5 JRE and go to control panel > java > Java > disabled the 1.6 versions and keep just the 1.5
Or you can have a read [here |http://john-goodwin.blogspot.com/2008/09/never-ending-eas-outline-save.html] for futher details
Ok?
Cheers
John
http://john-goodwin.blogspot.com/

Problem when saving an order after using userexit_save_document

Hi
We are doing an enhacement in sales order capture, and we have next problem, after saving the order, the change of adding the new order is not saved in CDHDR table with the I (of Insert), that's only one problem, but I have another worst , after I use exit save_document, I'm saving data in a Z table, and debugging the program, when I finish the exit save_document the Z table is Ok saved, with the correct data saved, but when I pulse F8 to make the order being complete saved, something is happening because the Z table changes its values as if I run the VA02 , but I'm still in VA01 finishing the saving of the new order, It's very weird, and I don't know if somebody has experimented something like this, please let me know, because its very Urgent!!
Thanks
Regards
Soraya

Hi,
To have the changed values being reflected in CDHDR, for the fields you wanted to track the changes- In Ztable, AT Dataelement level, In FURTHER CHARACTIRSTICS tab check the box CHANGES DOCUMENT, if you check this checkbox then this becomes the pre requisite for the CDHDR entires. Then in SCDO trnsaction try to cretae a Change document object for this table.
I think the table is not locked for entires. For this table provide the authorization checks then we can restirct others to enter the value into the table.
Try to use Authorization objects or LOCK related Function modules like ENQUEUE and DEQUEQUE.
Reward if helpful.
Best Wishes,
Chandralekha

Fields reorder when saving report in Crystal Reports Explorer

Post Author: brankin
CA Forum: Publishing
We're using Crystal Reports Explorer within BOE XI R2, and have noticed that when saving a report and reopening it the order of the fields changes. It seems to happen all the time and there doesn't appear to be any rhyme or reason to what happens. Does anyone know how to keep this from happening?

You need to update the "Object Changeability" in BW for Crystal report objects.
to do this:
1. run transaction /nRSA1
2. Select the transport connection tab
3. click the "Object Changeability" button
4. Select the "Crystal Report" line item
5. right click and select "Everything changeable"
6. Exit transaction

Menu bar problem when executing reports

We have a problem when executing the reports either from se38 or through transaction.
The standard menu bar is not appearing and in its place we are getting ????????????? ?????????????????
also the icons that are appearing in app tool bar are not showing anything.
Whats the reason for this?

hi,
It is not for one single report iam talking about,any report that is executed from se38 or transaction .
In selection screen of report we are getting ???????????????
?????????????? in menu bar instead of normal options like program edit goto utilities.................
does any one know the reason for this?
This issue we are facing today only.
Edited by: Gautham chakraverthi on Oct 31, 2008 3:06 PM

Problems when Saving as PDF in Framemaker 9

Hello,
Our department is having a couple of problems when 'Save as PDF' is used to create a PDF in FM9.   We all use WindowsXP.
Problem #1: No PDF created.   A window appears stating that Distiller 5.0.5 or higher is required; we all have Distiller 9.0 installed. So it doesn't seem to recognize that Distiller 9.0 is available. NOTE: When PRINTING to PDF there are no issues, it is uses Distiller 9.0 as expected.
Problem #2: PDF is created but chunks of text are missing.
We need to Save as PDF in order for our reviewer comments to automatically be added when importing back into Framemaker.
Can anyone help?
Thank you.
T.

Since you mention that you're on XP, have you installed the PostScript
printer Hotfix from Microsoft?
That would be my starting point for trouble-shooting because it
specifically addresses at least one of your issues.
Info at:
http://blogs.adobe.com/techcomm/2008/07/hotfix_for_framemaker_1.html
The fix is at:
http://support.microsoft.com/kb/952909/en-us
Art Campbell
[email protected]
"... In my opinion, there's nothing in this world beats a '52
Vincent and a redheaded girl." -- Richard Thompson
No disclaimers apply.
   DoD 358

System time out when saving report from portal

Hi,
We have a problem where the report output either gets time out or gives an output after 30 minutes if we try to save a report from portal in the form of excel.( report is run on the web)
Generally the query output has not more then 32k records.
Is it the number of records in the portal output which is the cause of the issue??
This is not the issue with the reports with leess number of records.
Can we do something to improve the performance here??
Thanks
Ajeet

Try creating aggrates on the cube. this may change the performance.
also you can change the query execution time.
but better check for some performance tuning by using aggrates.
check below suggestions also:
query execution
regard: gaurave

Problem when execute report Conversion Tool XI 3.0 on a client

Hi everyone,
When I use Report Conversion Tool on a client (not on Webi Server Windows 2003) I have an error (a red cross appears) before the conversion.
I believe that RCT can not open the document to migrate.
All it's OK when I use RCT since the Webi Server.
Any help will be appreciated.
Thanks

Hi,
Thank you for your prompt response.
I have install all the client tool (even SDK, Query Web Service) except Assitant migration source de données, Gestionnaires Vues d'entreprise et Gestionnaire de traduction.
I think I have a problem of rights on my Windows 2003 Server because in the log of conversion (C:Documents and SettingsUtilisateurLocal SettingsTempconversionUSER146731693logsD30860242.xml)
the following lines are written :
Note that I do the conversion with the Administrator login.

Photoshop CS6 transparent mask causing problems when saved as RGB Tiff and placed into CS5 Indesign

Is anyone aware of a gray/black halo around feathered transparency objects. The halo occurs where the solid area of pic feathers to the transparent.
NOTE: Image looks fine in Photoshop(CS6) but when placed as an RGB TIFF into Indesign (CS5) a black halo appears on page. See visual explanation below.
This only happens when image is an RGB Tiff and layer mask is used to create transparency. If image is saved as .psd then it is fine. Also when RGB tiff is converted to CMYK then this is also ok.
Is
I look forward to anyone's suggestions.
Ideally I could just start using psd format, but I have to handle alot of images that are already in RGB tiff and it is time consuming to have to open and re-save all of these.
Adobe Photoshop CS5 RGB tiffs are still working fine.
Thanks.
Colourjam.
(Pre-Press Production Digital Image Operator)

Yes the halo is does appear on the final PDF used for printing, and therefore does unfortunately print.
Why would RGB Tiffs in Photoshop CS6 suddenly cause this to happen. If we revert back to placing Photoshop CS5 files into Indesign, all is good.
Also it is not just an isolated event as my colleague has the same thing happening on his workstation.
Could it be that that Indesign 5 cannot colour manage the new CS6 RGB Tiff files?
CMYK tiff works well, as does PSD (CMYK and RGB)
Also please note, that if you were trying to recreate this to see if you get the samed problem, the halo occurs as soon as you create transparency with a layer mask and feather the edge of mask, and then save as RGB tiff. It will not be visible if you have a hard line or a vector edge.
Just for the record here is our set up.
Indesign CS5 (PC)
Photoshop CS6 (PC)

Oracle Report Font problem when run report from oracle EBS R12

Dear All
I have developed one Report in ORACLE REPORT BUILDER in windows environment. I see the output of that report, its ok, I deployed it on the EBS R12 which is on Linux environment, when i see the output, its fonts totally change and due to change in fonts, output not same as like in previous stage. When i print from dot matrix Printer then sometime its shrink the character and sometime break the output..
Kindly help me in this regard, because this problem i am facing from last few days.
i am waiting for your quick response.
Thanks in advance....
Regards,
Nawaz
Edited by: Haq Nawaz on Nov 5, 2012 11:45 AM

Thank you very much for your reply
I have changed the fonts in the report, but when i run it from the EBS its has the same problem. from the EBS output font look like as (COURIER) rather than CALIBRI WESTERN.
tell me what i have to change anything.

CS6 Color Channel Problem When Saving Oil Paint Files

When I save an OIL PAINT file created in Photoshop CS6, it saves with red and blue shapes over the image. Before saving, the image looks fine. I'm running windows 8. Is it me or a CS6 bug?

There were some driver problems that caused single tile artifacts when running Oil Paint.
Have you updated your video card driver from the GPU maker's website?

Layout problem when printing reports...

i created a simple form to pull several reports.
when i select the first report and print it, it prints normally.
now here's the problem...
when i select a second report, the margins change.
originally a margin would be set around 0.16 for the first report. now, for the second report, that same margin jumped up to around 2.1. why does it do that?
i have a lot of reports to print out and i don't want to reset the margins every time.
how can i keep the layout as "landscape" and all margins as 0.16?
i'm using oracle developer 6i.
any help would be appreciated.

Hi Ray,
What version are you on? There were some margin problems with various printer drivers that were fixed in Reports 6i. I'd recommend getting the latest patchset.
Hope that helps,
Toby

Hebrew problem when saving reports

Similar Messages

Maybe you are looking for