Hebrew versions of photoshop-upgrading from xp to win 7

my GF's daughter is studying photography in high school and they all bought cs3. the UI is in hebrew. shes using xp. the computer is very slow. im upgrading my pc and want to pass my hardware to her and add an ssd and pgrade XP to win 7 pro.
so some questions please
1-cs5 is the first version that is supported on win 7?
2-shes afraid for me to install a newer version because shes nervous it will look different and she wouldnt be able to do homework because the UI/menus/features will be different.
3-from what version does the software take advantage of strong (ish) gpus? im passing my evga gtx 280 to her.
4-is the hebrew version (not text support tool, but the whole UI) a built in feature, or do you specifically have to buy a hebrew version? Im curious if its like win 7 ultimate where all the different language UI are built in and you can change it on the fly
5-what is the ME version? I ask because mine is a regular CS4 version and I dont have an issue to add text to a photo in hebrew.
6-what is the hebrew UI version called?
7-how different is cs3 compared to cs6 or cs5? visually/UI or menus?
im trying to see if its even worth upgrading components/version for her. thank you for your time.

The ME versions existed up to CS5, that is correct, but as of CS6 this differentiation was obliterated, though, of course there may be specific issues of which I have no first hand knowledge being a German. In any case, from CS6 all the functions that previously required an ME version are integrated and if installed correctly, the app should appear in those languages as well. Beyond that I can remember a few threads about being not able to type certain characters, but this may merely depend on font avialability and glyph substitution settings. With regards to the UI - the icons' meanings haven't changed, but there are lots of new tools plus the UI has been overhauled and finetuned in pretty much every version in recent years. Whether or not that is confusing is probably down to the individual user. it may be overwhelming at the beginning, but one will get the hang of it eventually.
Mylenium

Similar Messages

I am trying to reinstall an old version of photoshop elements from a backup drive.

My computer died and I am trying to install an older version of photoshop elements from a backup drive on a new computer. I get the following error message " Could not complete your request because of missing or invalid personalization information. Help?

Just after double clicking or single clicking on the pse 2 shortcut hold down the Alt+Ctrl keys and keep holding the keys until you get a
Scratch Disk Preferences dialog and point the scratch disk to your portable hard drive and maybe that will work.

Will this version of snow upgrade from 10.5.8?

will this version of snow upgrade from 10.5.8?

Yes, Snow Leopard will upgrade Leopard. But you will need 10.6.6 or later if you plan to upgrade to Lion.
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current Tiger Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger and later.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s).

Elements 5 will not start from the windows old file after upgrading from vista to win 7

Elements 5 will not start from windows.old after upgrading from vista to win 7

Ideally there should not be any impact of OS change, but officially PSE5 is not supported on Win7.
What exactly happens ? Can you see the processes running in Task-manager?

Photoshop upgrade from student version

I want to upgrade from CS4 Extended full student version to CS5. Can I upgrade from a student version as I am no longer a student?

This might give you all information regarding Student version: http://www.adobe.com/education/students/studentteacherlicensing/

TP version problem during upgrade from 4.7 sr2 to ECC6

Hello All,
i am doing an upgrade from 4.7 to ECC6 (ultimately i have to upgrade to EHP4). I am stuck in phase PREPARE module Initialization finished with status failed #. Below is the error i am getting. before pasting log file i tried my best to uprade TP level by upgrading the Patch level. but its not taking effact in to SAP system. If i check TP version in STMS >> system >> Check TP tool it shows me old version.
below is the error log excerpt from file CHECKS.LOG
   #====================================================#
Requests and information for module Initialization #
   #====================================================#
ERROR:   The upgrade needs a patched version of R3trans which is
         build on 21.06.06 or later.
         The R3trans in your active SAP kernel is either older or
         the version could not be determined. Call it without
         any option to determine the build date.
         If the build date is too old, you have to replace it
         before you can continue the upgrade.
         Download the latest executable available from the SAP service
         market place and update it before you continue.
         Otherwise, the upgrade tools will be corrupted.
INFO:    The version check of the disp+work in your active SAP kernel
        determined that it has a sufficient level.
         No update of disp+work is necessary.
ERROR:   The upgrade needs a patched version of tp with version
         number 340.16.05 or higher.
         The tp in your active SAP kernel is either older or the
         version could not be determined. Call it without any option
         to determine the version.
         If the version is too old, you have to replace it before
         you can continue the upgrade.
         Download the latest executable available from the SAP service
         market place and update it before you continue.
         Otherwise, the upgrade tools will be corrupted.
ERROR: To be able to use ASU Toolbox, your system requires
       the ST-PI software component with at least Support Package Level 8
      After the update is done, the module must be repeated!
       For more information, see the upgrade documentation
INFO:       The upgrade strategy for the addon ABA_PLUS
            is described in note: 632429
INFO:       The upgrade strategy for the addon APPINT
            is described in note: 632429
INFO:       The upgrade strategy for the addon BP-R3PF
            is described in note: 632429
INFO:       The upgrade strategy for the addon FINBASIS
            is described in note: 438521
INFO:       The upgrade strategy for the addon LSO
            is described in note: 503468
INFO:       The upgrade strategy for the addon LSOFE
            is described in note: 503907
INFO:       The upgrade strategy for the addon PI
            is described in note: 700779
INFO:       The upgrade strategy for the addon PI_BASIS
            is described in note: 555060
INFO:       The upgrade strategy for the addon SLL_PI
            is described in note: 1306751
INFO:       The upgrade strategy for the addon ST-A/PI
            is described in note: 69455
INFO:       The upgrade strategy for the addon ST-PI
            is described in note: 539977
INFO:       The upgrade strategy for the addon WP-PI
            is described in note: 632429
   #===========================================================#
PREPARE module Initialization finished with status failed #
   #===========================================================#
i downloaded the 47 kernel files SAPEXEDB_304-20001172.SAR and SAPEXE_304-20001172.SAR and installed the kernel file. if i check TP version from command level it shows me 340.16.62, but in SAP STMS it shows me 340.16.03. Can somebody explain what shoulkd i do?
Can i know also if i can update SAP Kernel from 4.7 sr2 to NW7.0 without upgrading even started?
If somebody can tell me the exact number of CDs to use to upgrade from 4.7 SR2 to ECC6 EHp4, that would be very
nice.
Mani

Hi Mani,
ERROR: The upgrade needs a patched version of R3trans which is
build on 21.06.06 or later.
ERROR: The upgrade needs a patched version of tp with version
number 340.16.05 or higher.
show that the tp and R3trans used by the source 470 system are old.
You should download the latest tp and R3trans for kernel 470, and
replace the old tp and R3trans with the downloaded ones under the 470 kernel directory. The 470 kernel directory is specified by parameter DIR_EXECUTABLE which is usually /usr/sap/<SID>/SYS/exe/run.
Please note that there is also a kernel directory under /<DIR_PUT>/<SID>/SYS/exe which is for the the target system 700. Please do not replace tp and R3trans under this directory with the ones downloaded for kernel 470.
NO, you cannot update SAP Kernel from 4.7 sr2 to NW7.0 without upgrading even started. Kernel upgrade will be done by SAPup automatically.
With Best Regards
Julia

Photoshop Upgrade from PsE?

Can I buy a upgrade to photoshop if all I have is elements 12?
[Title changed for clarity - Hunt]

Cutiepaatudy,
Going back many years, Adobe did offer a form of Competitive Upgrade from PsE to Ps, but I have not seen one of those in a very long time.
As JJMack points out, PsE is not in any upgrade path now, but with the CC (Creative Cloud) subscription license, one can get Ps for a fairly low payment. Also, Adobe has done a bit of "bundling" of a few other programs, so that might be a good route.
Good luck,
Hunt
PS - I will also change the title of the post, to reflect an Upgrade question, to help others with the same, or very similar question. They can benefit from JJMack's response.

Upgrading from CS2 Suite (Win) to CS5 Suite (Mac)

Over the last few days I have twice called Adobe UK sales and have been assured that I can easily upgrade my Windows CS2 suite to a Mac CS5 suite.
I was told that all I have to do is enter the CS2 Windows serial number during the CS5 Mac installation and it will be accepted.
However I have found no mention of this anywhere on the internet.
Has anyone been given the same or conflicting advise by Adobe for this type of scenario?

Adobe are even contracdicting themselves re CS5 upgrades.
I was told by the UK sales team that I wouldn't need to submit a letter of software destruction upgrading from CS2 Windows to CS5 Mac.
However, the Adobe on-line representative said I would.
I can understand this requiurement for a straight platform swap of the same version.
However, if I am upgrading, I surely need a valid suite to upgrade from?
If I destroy my CS2 I will no longer have a valid suite any longer!
I have also found out that PhotoShop Mac CS5 will apparently no longer have the ability to print printer profiling targets with colour management disabled. Supposedly Adobe labs are developing a separate utility for printing profiling targets but with no ETA. This means that I will have to continue to use an earlier version of PhotoShop anyway!
With these uncertainties, contradictions and complications I have now cancelled my order.
Thanks again for your help.

SCOM 2007 server OS upgrade from 32 bit Win 2003 SP2 to Win 2008 R2 64 bit

Dear Experts,
We are planning to upgrade where in SCOM 2007 R2 presents on 32 bit Virtual Machine Win 2003 SP2 to Win 2008 R2 32 bit or 64 bit. Though OpsManager Database is already upgraded to SQL 2008 R2 from SQL 2005. So No pblm with DB upgradation.
So my point is If I go ahead to upgrade from Win 2003 (SCOM 2007 R2 resides) to Win 2008 R2 does it create any impacts on SCOM 2007 R2 environment ? Please let me know the procedure for this or any documentation is available to complete this.
Thanks in advanced!
Saravana Raja

Firstly,
Please note that you can only upgrade an OS to the same architecture (i.e. from x86 to x86, and not to x64). See the following Support Article about supported upgrade paths for Windows Server 2003: https://support.microsoft.com/kb/951041?wa=wsignin1.0.
Therefore, if you plan to upgrade to a x64 architecture, you will need to perform a new installation, and not an in-place upgrade. If you are going that route, I'd suggest skipping Windows Server 2008 R2, and try to push to Windows Server 2012 if not Windows
Server 2012 R2; to more future-proof your environment.
Further, If you are going to perform a new OS installation (to move into x64 architecture), why not also utilize the "new installation" requirement in that scenario to also upgrade to System Center 2012 R2 Operations Manager?
The base scenario would be for you to perform an in-place upgrade of Windows Server 2003 x86 to Windows Server 2008 R2 x86. Except, there is no x86 version of Windows Server 2008 R2, only x64! Note: Windows Server 2008 (without the 'R2') has an x86 option.
--- If you found this post/reply helpful, please visit my personal blog for more helpful articles. --- AdinE MCSE, MCSA, MCITP, MCTS; (Specializing in System Center and Private Cloud) LinkedIn: http://ca.linkedin.com/in/adinermie Website: http://AdinErmie.Wordpress.com

C6150 won't print after upgrade from Vista to Win 7

Hello.
I have a C6150 AIO that worked fine under Vista. Since I've upgraded to Win 7, I cannot get a printout from any application or the Windows test print. The HP Solution Center test print works fine.
- Printer is hooked up wirelessly
- I've installed the latest driver from HP that is supposed to be Win 7 ready
- I've also installed the patch they recommend after upgrading from Vista
There is no error. Print job shows up briefly in the print manager window, then disappears as though it printed. I'm at a loss, any help would be appreciated.
Paul
This question was solved.
View Solution.

I hope I have now sorted this problem.....
After numerous atems to install HP Windows 7 drivers & apps and failing I decided to restore the PCs to the day before I first installed the Drivers etc.
Then I unistall HP software and reinstalled the new drivers etc. This I had to do a couple of times on the Laptop (restore 3 days back).
After installing the HP software you can print a test page, print OK. Then goto printer properties and ty to print a test page from there, if this is unsuccessful restore system and start again. Most it took me was three attemps.
Now allI have to do is hope that the windows updates dont mess it all up again!
Hope this helps you......... Good luck

Trying to reinstall old version of Photoshop Elements from a disk

Photoshop Elements disappeared from my computer and when I tried to reinstall from the disk, I am not having any luck getting it to work. I am using an older version of Elements made for Windows XP, ME, 2000, 98, NT 4.0 and OS 8.6 to 9.x. Any suggestions on how to get this to work?

What operating system are you using?
Was it working before it "Disappeared"?
Sounds like photoshop elements 1 (one)?
What happens when you try to install it?
Your sure photoshop elements is really gone?
Have you looked in
C:\Program Files (x86)\Adobe
or
C:\Program Files\Adobe
for a folder called Photoshop Elements

Upgraded from XP to Win 7, backed up all iTunes media to my iPhone 4, only transferred iTunes purchased media.

Things purchased on iTunes: easy to transfer to my PC/iTunes Library from my phone.
Things ripped from CD/downaded elsewhere: can't seem to transfer off my phone.
Help!
I don't want to sync my device with iTunes as it will erase my data. Can't enable disk use as it says it will also erase my data. I have all my media on my iPhone as it was on my PC before I upgraded to Win7 from XP, now I just want to transfer it all back!

Hey there SNagai,
It sounds like you are not seeing your iPad in iTunes after updating it. I would recommend the following article to help you get that working again:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Here is an overview of the troubleshooting to be done:
1. Update iTunes
2. Check the USB cable
3. Verify that Apple Mobile Device Support is installed
4. Restart the Apple Mobile Device Service
5. Verify that the Apple Mobile Device USB Driver is installed
6. Check for third-party software conflicts
If the issue persists, try uninstalling iTunes and its associated apps with either of these two articles depending on your operating system version:
Removing and Reinstalling iTunes and other software components for Windows XP
http://support.apple.com/kb/ht1925
Or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Thank you for using Apple Support Communities.
All the very best,
Sterling

Windows 8.1 Pro upgrade from store on win-8 hangs at "preparing to restart" 98%

Hi,
I tried to upgrade win-8.1 Pro from store and it run more than 12 hrs and does not move after 98% "Preparing to restart".
I tried few times after restart also same.
why
Tks
hari

Hi，
By analyzing the error log, operating system did not have correct privileges to perform the upgrade.
Did your computer join the domain?
If your computer joined the domain,we suggested you to remove the machine from Domain and move it to a workgroup
Did you have multi-bootable partitions? If yes, mark your Windows partition as "Active".
http://windows.microsoft.com/en-us/windows/mark-partition-active#1TC=windows-7
If the issue persists,Run CMD as Administrator, type following command：
Repair-WindowsImage -Online -RestoreHealth
Also, find the following location,and update the ownership of this directory to the Administrators group and granted Administrators Full Control to the directory.
C:\ProgramData\Microsoft\Crypto\RSA\MachineKeys
Hope this helps.
Regards,
Kelvin hsu
TechNet Community Support

SoundBlaster Live! Value upgrade from Win98se to Win

i want to uprade my computer to Win XP(from Win98se)......currently installed is SoundBlaster Li've! Value(ver 4.06.628)....i bought this computer from dell in 5/00.....i know this computer is old, but it works fine...... the SB drivers have never been updated...
what's the best way to make this change?(what procedure should i follow?......for example, should i remove the drivers from the Win98se syst before i install WinXP?....etc..etc..)....what drivers should i use?......i see there is the 'Li'veDdrv Uni-Pack(SBLW-XPWEB-W4-US) with a caveat for SB systems(not sure what it means).......
i am somewhat of a novice.....so i'd appreciate as much detail as possible.....trying to follow some the info on this web site is somewhat confusing(especially since there is no telephone help or clarification for such an old SB card).......so your help is appreciated....
thanks in advance for your help.......dony

Yes you can uninstall those old drivers & install Uni-Pack after U have installed Xp

After upgrading from ASA 8.2 to 9.1(2) not able to get web site

Dears,
ASA Version has been upgraded from 8.2 to 9.1(2). Since then, website is not accessible from outside.
Diagnosis:
Many web sites are deployed behind the ASA. When anyone accesses website from outside, the following error is reported: The page cannot be displayed. No issues have been reported with any other websites.
In the ASA, two different public subnets are in use in order to allow accessing the website from the public domain. No issues have been reported so far with the first subnet. The website is mapped to a public address in the second subnet. When the website is mapped to an IP address in the working subnet, the website is accessible from outside. As a workaround, this is applied and the website is up and running.
As the website is working fine with the second subnet, NAT and ACL configuration is fine. We have turned on logging in the ASDM, but no traffic was observed on the ASA for the non-working subnet. On the other hand, the traffic was noticed on the ASDM for the working subnet.
The working subnet is XX.YY.XX.X
Non working subnet is XX.YY.YY.X
The outside interface ip is XX.YY.XX.X (Working Subnet)
Tried to assign one ip address to the PC from non working subnet and connected to the Switch , its pinging from outside

Hi
Have you tried using packet tracer?

Hebrew versions of photoshop-upgrading from xp to win 7

Similar Messages

Maybe you are looking for