HEED HELP QUICLKY!!! Please respond!

Hi all. I sold my iBook a couple of months ago to someone over the internet. Everything was fine until I got an email from him this morning stating that he tried to purchase Applecare, but could not because the computer was now past the 1 year mark for purchasing it.
He is stating that the original purchase date was October 6, 2005- but I know for a fact that the original purchase date was October 14, 2005- which means tomorow will be one year.
I am 99.9% certain that I gave him the orignal purchase reciept, but he says doesn't have it. I have asked him for the serial number, but I have not gotten a response yet.
My question is this: I registered the machine when I bought it, so is it possible for me to view that information somewhere online? I just need to confirm that I did in fact buy the machine on October 14th, not October 6th. He's seeking reimbursement of the cost of Applecare. I know he has no legal grounds for this, but I want to be helpful.
iBook G4 12 inch 1.33/40GB/512 Airport Bluetooth   Mac OS X (10.4.5)   iMac G3 Rev. A Bondi Blue 320MB RAM/80GB Hard Drive/233 MHz OSX 10.3.9

You won't find any help from Apple on these forums, as they are Volunteer Based. Your best bet is to go back to Apple and speak with a supervisor until you get this resolved. My Mom had a philosphy for resolving purchase disputes - keep asking for the next level of supervision until you get to the person who agrees with you. The higher up you go, the less that person wants to get bogged down in the details. Hope this gets resolved to your satisfaction.
Thanks for the
iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD   Mac OS X (10.4.8)   LaCie 160gb d2 HD Canon i960 printer

Similar Messages

  • Second attempt.. trackpoint doesn't work.. I want to use back version.. need help.. please respond

    please respond !! I don't want Version 4.. how do I download older version that works ???

    Someone else may come along and have an idea, but as far as I know the iMac shuts off wifi when asleep so it can't be used to wake up the Mac. It has to be a wired connection.
    Leaving the iMac awake with the display off really doesn't use much energy so it might be worth considering.
    ~Lyssa

  • Help. Please respond!!!

    How do you put album art on if i didnt buy the song from itunes? i tried the drag and drop thing but it only shows up on my ipod for about ten of them. Please help.

    i tried the drag and drop thing but it
    only shows up on my ipod for about ten of them.
    Please help.
    Try a reset on your iPod. This is the iPod equivalent of a reboot and won't harm any of your data.
    Reset your iPod.
    1) Slide the lock button to ON.
    2) Slide the lock button to OFF.
    3) Press 'menu' and 'centre' button together for several seconds.
    4) Follow the instructions.

  • Actionscript 3 help. Please respond!

    Hello, I'm new to Actionscript 3 and still getting the hang of all the changes and such. However, one problem is sorely annoying me, and I need some outside opinions on what could be wrong. The code is basically a rewritten version of some code I found someplace else, and my main goal is to find out the error with the code. The code looks like:
    package
    import flash.display.MovieClip;
    import flash.events.MouseEvent;
    public class Main extends MovieClip
    var sceneOne:SceneOne;
    var sceneTwo:SceneTwo;
    var sceneThree:SceneThree;
    public function Main()
    sceneOne = new SceneOne(); trace("Working");
    sceneTwo = new SceneTwo(); trace("Working");
    sceneThree = new SceneThree(); trace("Working");
    addChild(sceneOne); trace("Working");
    //Add event listeners
    this.sceneTwo.OutsideButton.addEventListener(MouseEvent.CLICK, onHillButtonClick); trace("Working");
    this.sceneTwo.bathroomButton.addEventListener(MouseEvent.CLICK, onPondButtonClick); trace("Working");
    this.sceneOne.livingRoomButton.addEventListener(MouseEvent.CLICK, onBackButtonClick_Hill); trace("Working");
    this.sceneThree.livingRoomButton.addEventListener(MouseEvent.CLICK, onBackButtonClick_Pond); trace("Working");
    //Event handlers
    function onHillButtonClick(event:MouseEvent):void
    addChild(sceneOne);
    removeChild(sceneTwo);
    function onPondButtonClick(event:MouseEvent):void
    addChild(sceneThree);
    removeChild(sceneTwo);
    function onBackButtonClick_Hill(event:MouseEvent):void
    addChild(sceneTwo);
    removeChild(sceneOne);
    function onBackButtonClick_Pond(event:MouseEvent):void
    addChild(sceneTwo);
    removeChild(sceneThree);
    The error is occuring @ line 22, saying:
    TypeError: Error #1010: A term is undefined and has no properties.
    at Main()[/Users/Mike/Documents/Main.as:22]
    I'm unsure as to what the problem is, as I give it properties. Please help, thank you.

    This is the Flash Player forum; why don't you post this in the ActionScript 3 forum...?

  • Major yearbook picture flow help! PLEASE RESPOND SOON!?

    Ok so we are doing our year book and we figured out how to do the merged data file with microsoft exel and then place the photos in our yearbook page... what we are wanting to learn how to do now is instead of having like 6 rows of 5 photos how could we do it to take out 2 pictures on the 1 and second row so we could have 4 on the first two rows then 6 on the other 3 rows.. that way we could place survey results in the blank area and other things? Hope I explained that good enough! Thanks for all of you help!
    Columbia High Yearbook Staff!

    A picture is worth a thousand words, and your numbers don't quite square up. Attach a picture.
    It sounds like you want to have two rows of 4 and then three rows of 6, and then what? Is that it for the page? On to the next page the same way?
    You could just merge 24 seperate fields.
    Or you could pad your spreadsheet with 2 blanks in each of the first two rows, and then delete the blank boxes after you run the merge.
    I think I would probably do the latter. That just turns it into an Excel problem.
    If you want to solve this with InDesign scripting, well...there's no control over the internals of data merge. You can use it to change around
    your document after (or before) the merge is complete, but that doesn't sound like an efficient approach here. (So your post is probably better off in the main forum, oh well.)

  • Users of imovie experience a lot of problems and crying for help and no one at Apple did not respond I do not understand how a company like Apple puts experts to help users Please note that anonymous experts in Internet offer their help for money

    Users of imovie experience a lot of problems and crying for help and no one at Apple did not respond
    I do not understand how a company like Apple puts experts to help users
    Please note that anonymous experts in Internet offer their help for money

    Users of imovie experience a lot of problems and crying for help and no one at Apple did not respond
    I do not understand how a company like Apple puts experts to help users
    Please note that anonymous experts in Internet offer their help for money

  • HT1977 I did this and a bar showed up at the bottom and now I cant click on the apps and cant transfer them. Please help because I have accidently deleted the App store from my i pad 1. I am not very technoligically advanced so please respond in a noncomp

    I synced my ipad to my itunes store on my computer and a bar showed up on the bottom of the screen showing how many gigabytes i was using. Now i cant click on the screen to move the app from itunes to my ipad for some reason, or my movies/ music for that matter either. The real reason i am doing this is because i accidently erased the app store and dont want to erase all the apps i already have on their. So if someone can help me get the app store or fix the syncing problem that would be great because i use it for school which requires certain app be installed. Please respond quickly!

    Jimmyt97 wrote:
    Now i cant click on the screen to move the app from itunes to my ipad for some reason, or my movies/ music for that matter either.
    What are you talking about?

  • When I try to set up Icloud control panel in Windows Vista, I get "your setup couldn't be started because the Icloud server stopped responding. I've tried loads of fixes suggested on the net but none worked. Can anyone help me please?

    When I try to set up Icloud control panel in Windows Vista, I get "your setup couldn't be started because the Icloud server stopped responding. I've tried loads of fixes suggested on the net but none worked. Can anyone help me please?

    Hello, ksb2. 
    Thank you for visiting Apple Support Communities.
    We are investigating this issue. This article will be updated as more information becomes available.
    iCloud: iCloud Control Panel setup cannot be started
    http://support.apple.com/kb/TS5178
    Cheers,
    Jason H.

  • VERY BIG PROBLEMS WITH MY ZEN MICRO AND MEDIASOURCE! PLEASE PLEASE PLEASE HELP ME! PLEASE RESPOND

    Ok so a while back I had to give up my computer because it wasn't working.
    I thought that with my new computer I'd be able to transfer all of my music from my zen micro onto my new computer.
    Now my new computer is set up and I have installed creative mediasource and everything. I started to transfer my music from my zen onto my computer. My first 2 songs transfered successfully onto my computer. On the third song, I get this message:
    "Unable to read file, file may be in use, missing, or corrupted."
    I thought that maybe it was just that one song so I shrugged it off. But then it says the same thing for every single other song that i have! Only my first 2 songs out of my entire music library on my zen will transfer!!!
    Please i really need your help!!!
    And say that there is no hope in getting the rest of my songs to transfer and i have to download 094 songs from limewire? I'll surely be arrested for downloading that much! What should i do if i must download all of them?
    And one more problem with my zen: Some of my Jump Little Children songs are doing something weird. The song will be fine and then a clip from another song will play during it! And then press next and it just keeps playing all of my Jump songs in order even though my player is on shuffle and they do the same thing with the clip from another song interupting it. Whats going on?
    Most importantly though, i really need the questions answered about transfering from my zen to my computer because i'll be getting a new player soon. But this is my entire music library at stake!! PLEASE RESPOND!!!

    Might try this:? http://forums.creative.com/creativel...mp=true#M95059

  • Hello. I have this situation: iphone 5s freezes and does not respond. connect to itunes to restore it, but there says that I should turn off search by icloud in the settings of cellphone. but if the phone freezes?? what to do?? help me please!!

    Hi. I have this situation: iphone 5s freezes and does not respond. connect to itunes to restore it, but there says that I should turn off search by icloud in the settings of cellphone. but if the phone freezes?? what to do?? help me please!! Thanks advanced!!

    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Confirm that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.

  • I have need help with something Please respond Quickly :)

    I have need help with something Please respond Quickly  ok so i have the linksys wrt54g Version 2.2 and i upgraded the firmware to V4.21.4 from this site http://homesupport.cisco.com/en-us/wireless/lbc/WRT54G and i clicked V2.2 for the router. So after i upgraded i lost internet ability i can't use the internet so i had to downgrade back to V4.21.1 but i want the things that newer update sloves. Please Help. Everything thing says DNS error? aka Modem.
    $$Cgibbons$$

    Ya i tried that i tried restoring and redoing everything when i downgrade back to .1 it works fine though?
    $$Cgibbons$$

  • The account is invalid to access, please help me to connect to a new right email address. This is urgent for the pre-order, please respond as soon as possible.

    My email account is invalid to access, please help me to connect to a new right email address. This is urgent for the pre-order process, please respond as soon as possible.
    <Email Edited by Host>

    This is a user-to-user technical support forum. No one here can help you.
    Try
    https://expresslane.apple.com

  • Help please respond my iphone won't turn on

    It's been charging all night last night and all day this morning and you know when it is in the process of turning on and the apple comes up, well every single time after the apple comes up it doesn't turn on normal, the apple just disappears and the entire screen goes black with just a loading circle in the center and it has been doing this for over 12 hours. I've tried to reboot it by holding down the circle button and the top button together and it turns of completely that way and then I turn it back on but it still goes to that black screen with the loading circle. Long story short, my phone won't turn on. Please respond if you know a way to fix this.

    Here are steps to get DFU Mode: Open iTunes on computer. Connect iPhone to computer. (some turn off iPhone here, I do not) Hold both home and power buttons for exactly 10 seconds, release power button, keep holding home button until iPhone recognizes iPhone in Recovery Mode. Usually takes 10-20 seconds of holding the home button. If the iPhone screen is black (blank) the iPhone is in DFU Mode.

  • HELP - DEAD iPOD !!! - APPLE PLEASE RESPOND

    After updating my 30 gig 5G with 28th June update it has become paralyzed - blank white screen and emits 3 beeps when I try to do anything.
    I have seen similar threads here.
    Apple please respond - what should we do?
    thank you
    Pete
    London
    UK

    Apple doesn't post here. Fill out a service request at http://depot.info.apple.com/ipod and have Apple repair or replace your iPod.
    Nikki

  • Help required please. "Itunes can not read the contents of my iphone"

    Greetings all,
    I know this question has been asked before and I apologize for asking again but all the solutions provided don't seam to work for me, can anyone help me please.
    I am receving the message: "Itunes can not read the contents of the iPhone. Go to the summary tab In iPhone Preferences and click restore torestore this Iphone to factory settings".
    Now a little about my iphone, Itunes and my laptop and what steps i havealready tried.
    I have an iPhone 4 running software 5.0
    My itunes version is 10.5.0.142
    I know these are not the most up to date versions but I have had this issue for almost 3 months now and updating the software back then was the first step I tried. I don’t believe updating to the latest will fix this issue as updating the last two times did nothing.
    Every so often after starting Itunes, The program will stop responding and will require the three finger death kill (CTRL, ALT, DELETE) to open task manager to end the task of Itunes. Once it shuts down, I restart the iTunes and it runs smoothly, apart from not reading my iPhone.
    When I run a diagnostic in itunes under the help tab, I get these fail messages:
    Network Connectivity test: Secure link to Itunes store fail
    Device connectivity test: Under support services: Itunes helper is not running. And under ports: No iPod, iPhone or iPad found.
    Device Sync test: No iPod touch, iPhone or iPad found.
    *See below for full diagnostic report*
    I have restored back to factory settings twice.
    I have shut down and restarted both my iPhone and laptop.
    I am running Windows 7 32-bit on my laptop.
    I am using ZoneAlarm as my fire wall, and have been disabling it when syncing my iPhone to prevent other error messages.
    The iPhone is plugged into a genuine Iphone USB cable and is plugged into a USB port not a USB hub on my laptop, I have tried plugging it into all 4 USB ports and this issue still persist. The Cable is less then 5 months old, is not frayed or damaged in any way, have also borrowed 2 other cables from friends and still the same issue.
    The iPhone does not even come up in windows explorer as a digital camera.
    The iPhone is NOT jailbroken
    I do not live close to a so called genius bar, however I have made the journey to them on 3 separate occasions last year when I first received my iPhone for a different issue, the so called genius's could not fix the problem so they just gave me a new (refurbished) iPhone, which did not extend my warranty. I will not be taking the iPhone back to them as I believe they can not resolve many issues, this is why I am reaching out to the power of the people in the wider apple community.
    I have read in other forums about ifunbox and other programs for jail broken iPhones to isolate folders “iTunesDB” and "iTunesCDB" and delete them. If this is the issue is there a way to access these files through windows explorer as my iphone is not jailbroken.
    I hope I have provided enough information and someone can help me fix this issue. If I have left anything out, please let me know. I thank everyone in advance for your patience and support.
    Thanks
    Hoggie27
    FULL DIAGNOSITC REPORT
    Microsoft Windows 7 Home Premium Edition Service Pack 1 (Build 7601)
    Hewlett-Packard HP Pavilion dv6 Notebook PC
    iTunes 10.5.0.142
    QuickTime not available
    FairPlay 1.13.35
    Apple Application Support 2.1.5
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 4.0.0.96
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.3.494
    Gracenote MusicID 1.9.3.106
    Gracenote Submit 1.9.3.136
    Gracenote DSP 1.9.3.44
    iTunes Serial Number 001BAD14XXXXEA78
    Current user is an administrator.
    The current local date and time is 2011-11-16 10:04:53.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce GT 230M 
    **** External Plug-ins Information ****
    No external plug-ins installed.
    The drive H: Vodafone  USB SCSI CD-ROM Rev  USB is a USB 1 device.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:    {97524DB0-B9DC-41DB-8AFA-0CE6938F7C95}
    Description:    PC
    IP Address:    (HAS BEEN REMOVED FOR PERSONAL REASONS)
    Subnet Mask:    255.255.255.255
    Default Gateway:    0.0.0.0
    DHCP Enabled:    No
    DHCP Server:   
    Lease Obtained:    Thu Jan 01 11:00:00 1970
    Lease Expires:    Thu Jan 01 11:00:00 1970
    DNS Servers:    10.143.147.147
            10.143.147.148
    Adapter Name:    {BFF0456E-DE42-4FEF-B1FA-1EA1C5EDEE42}
    Description:    Vodafone Mobile Broadband Network Adapter (ZTE)
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    No
    DHCP Server:   
    Lease Obtained:    Thu Jan 01 11:00:00 1970
    Lease Expires:    Thu Jan 01 11:00:00 1970
    DNS Servers:   
    Adapter Name:    {D5511FFD-0CA8-4F62-B3CA-E90384FFCD03}
    Description:    Broadcom 43225 802.11b/g/n
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    Yes
    DHCP Server:   
    Lease Obtained:    Thu Jan 01 11:00:00 1970
    Lease Expires:    Thu Jan 01 11:00:00 1970
    DNS Servers:   
    Active Connection:    PC
    Connected:    Yes
    Online:        Yes
    Using Modem:    Yes
    Using LAN:    No
    Using Proxy:    No
    SSL 3.0 Support:    Enabled
    TLS 1.0 Support:    Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    ZoneAlarm Firewall is installed.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2011-11-16 09:59:57.
    **** CD/DVD Drive Tests ****
    LowerFilters: Afc (1.0.0.2),
    UpperFilters: GEARAspiWDM (2.2.0.1),
    F: hp CDDVDW TS-L633N, Rev 0300
    Drive is empty.
    **** Device Connectivity Tests ****
    iPodService 10.5.0.142 is currently running.
    iTunesHelper is currently not running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34.  Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C.  Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    1394 OHCI Compliant Host Controller.  Device is working properly.
    Most Recent Devices Not Currently Connected:
    iPhone 4 (GSM) running firmware version 5.0
    Serial Number:    85107XQLA4S
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.
    < Edited By Host >

    Hi AM_Kidd.
    Thanks for your reply.
    I have done a complete uninstall and re install of iTunes and all related apple programs from my laptop through control panel, add remove programs and also by going through program files and deleting all tracers of any left over folders remove programs may have missed.
    My apologies for forgetting to add this in my original post.
    Thanks again

Maybe you are looking for

  • How can I show only text edits and not text formatting when using print comments summary?

    Acrobat 9.3.0 for Mac. Here is the scenario: I used the Compare command to see the changes between 2 PDFs. The resulting file some edits are inserts and some are deletions. I want to print a comments summary only showing the text edits. In the Compar

  • Transfer of projects to another user

    i am a new user of logic , problem I am faced with is when i tranfer a project folder via e-mail with an added recorded instrument track (drums)to my guitarist , he can open the project but cannot hear my track and vice-versa ... we can see in the BI

  • Epson 3170 scanner problem

    Apple has effectively killed my Epson 3170 scanner. I have followed most of the post here trying to solve this problem. I have deleted Epson scan and downloaded the driver from Epson that is supposed to work with image capture, but it will not work.

  • Safari on the iMac is not showing flash items

    Some sites are not loading up videos and soundcloud.com is informing me that Safari has a flash blocker installed. This is not the case - I have all latest versions of every software and I have reset safari and emptied this and that. Does anyone have

  • Simple_Operation.vi from PI to operate c-843

    Hi,  I am learning to work in labview. I am doing my field test with the PI C-863. i have learned that for C-843 PI had distributed the simple_operation.vi to test the initial movements. Please share the sample vi. This help me a lot in my learning.