Heeeelp .

okay , i have an ipod touch , and i've had wifi on it before. its worked.
and been connected. For the past two months i've been trying to connet on my
ipod and , it wont connect, it says no wi - fi available , when i had no problems connecting with my laptop . i've tried to reset the network , reset everything and nothings working ......help?

The New iPod update is very buggy. My iPod is virtually unusable now. You might have to do like me and wait till a new update comes out to fix all of the issues the current update made.

Similar Messages

  • I can't export any files from pages unless I create a duplicate file. I can't export to doc, docx or pdf! Heeeelp!

    I can't export any files from pages unless I create a duplicate file. I can't export to doc, docx or pdf! Heeeelp!

    what version of pages?
    what is the files type that you are trying to export?
    what do you mean unless I create a duplicate file? the whole point of export is that you get a new file with a new format

  • Using Mavericks for the first time, day two- heeeelp!

    OK, long story short:  old MacBook Pro with Snow Leopard went to Apple Heaven and new MacBook Pro with Mavericks (also is a 15" 2.3GHz i7 512GB flash drive machine with 16GB RAM) got a "data transplant" via Migration Assistant or whatever it is called.
    The new MacBook Pro essentially took all the data and all my settings/preferences as well as my crucial software which is disk-loaded (I bought an external drive, arrived today), rejecting only what was incompatible (unfortunately my Oldie But Goodie Photoshop).
    So far, so good.
    Now-  learning curve aside- there is weird behaviour going on:
    1.  The (Chrome) browser screens disappear if internet connection is lost but this is not shown in the wifi so I am never sure if it is loss of Broadband or loss of wifi.  I personally blame BT for this because, after 22 weeks of rubbish service, I know that the connection is less than ideal.  Is this normal behaviour?  Then-
    2.  there was a weird buzz like alarm noise, quite loud from near the palm rest on the left which nearly gave me a heart attack (I am now exceedingly stressed over the matter of breakdown, repair, and another breakdown of my main machine which I had to pay for and then anyway replace).  Should I be worried?
    3.  Final Cut Pro's Compressor is failing on export (I have posted on that forum, after trying the cleaning up of settings and trashing preferences).  Does anyone know how best to uninstall software on Mavericks without completely making a guddle of it?  So that I can reinstall, from the disks and see if I can cure the problem, or is that not even recommended/necessary?
    4.  Clicking a link in Mail will open TWO browser instances since I agreed to the incessant prompts to update software (yes, it restarted).  I hope that this is a passing phase because it is like it is launching as many windows as clicks for an apparently unresponsive link...?  Does that make sense?  And-
    5.  My user folder has a "1" after it, probably because it is a duplicate of the one from the old Mac?  Can I get rid of that "1" or am I stuck with it?  I wish I had been able to just bring in the applications, my Mail, my iPhoto and some utilities I value.  But the option to migrate is very all (with just three or four option) or nothing.
    Finally-  signing into the forum after viewing as a guest doesn't work first time.  I end up having to press "sign in" a few times to see my name pop up.  And even then I still cannot go into some threads without me being "signed out" again.
    Folks-  thank you for reading.  I love Snow Leopard, never thought that I would end up with having to use Mavericks with ZERO time to adapt (as is Sod's Law-  I have a client with a deadline who has already been waiting three weeks due to the demise of my main Mac) and ANY help coping is immensely appreciated.

    1.  I assume that that suggests that it is not normal for a browser window to respond with minimisation?  It is just weird when a window just disappears, no reason given (and since there is no obvious loss of internet it can take you by chance)
    2.  Good that you ask.  No, it hasn't.  I meant to say when I first posted.
    3.  Thanks, I gather that.  It is just that Mavericks is so different from what I am used to.  Sigh...
    4.  It has calmed down but there is absolutely no rhyme or reason to it.  Forgot to mention that I had my first ever crash of Final Cut Pro since I have been using it nearly daily for four years.  I even had Chrome crash on me in mid-upload (drat, drat, drat!).  I don't click or plough on- I stop, think and consider. Hence me posting.  Mavericks is just not as "smooth" as Snow Leopard to me.
    5.  Yes, I understand.  I just wish it would show me both instead of just the one with the "1". 
    Tell me about it!  It is impossible, I came here to answer via the link in the emailed notification, was already signed out and signed in and was returned to the front page.  Had to go back to my Mail, click the link again and this time, luckily, I was signed in.  In other words- the session is impossibly short and signing in doesn't return you to the browser window you were but rather returns you to the front.  Meh.

  • FIREFOX WONT OPEN. Error message: The application Firefox (Original) quit unexpectedly. HEEEELP!!!!

    I keep recieving this messege. Will not relaunch. I have tried to restart my computer. I do not want to uninstall and reinstall because I do not want to lose my bookmarks.

    Thanks for asking. It happens when I click the "Interface builder.app" name in finder and when I double-click an .xib file name in finder.
    As I mentioned, I have repaired permissions on the drive to no avail. I have also read older posts on the web referring to various preference plist files but those don't exist with this build of xcode.
    I have also had older builds of xcode on this mbp and worked thru a couple of tutorials. Interface Builder from those older builds worked. I'm not sure were to get them, now, and I doubt they would have the iphone sdk included.

  • ProRes missing from FCP 6 - heeeelp

    hi
    i just installed FCP6 on my new macbook pro and the ProRes codec is missing. i can't setup a sequence with it or edit existing projects that use ProRes.
    does anyone know why it wouldn't have installed the codec or know where i can get it from if its just a case of putting it in a folder? i've re-installed FCP6 3 times now and it still doesn't show up.
    i tried a file created on another computer that is encoded with ProRes and i can view it perfectly.
    I took a couple of screen-grabs to show what FCP6 says when trying to create a sequence using ProRes as the codec, and to show that there is no codec in the list.
    http://img708.imageshack.us/img708/6...00218at213.png
    http://img404.imageshack.us/img404/7...00218at212.png
    the other projects i have tried to open and use were created on FCP 6.06 and i have updated my FCP to the same version.
    I did another clean install today and it's still missing. I can't believe i am the only person to ever have this problem. started to get a bit annoyed now, haha,
    any help will be greatly appreciated.
    cheers

    Same problem here. After a fresh reinstall and update of FCP 6.0.6, all ProRes codecs are missing.
    Some of the error codes I'm seeing suggest that it's a hardware issue, but that doesn't make sense to me, since my machine is new enough to run Color. It seems like the codecs just weren't installed correctly.
    I finally ordered FCS3, which should correct this, but if there is an outstanding computer issue I would like to know about it before I upgrade.
    Thanks for your help.

  • AsyncFileUpload probelm ,,doesn't show the photo in my thumbnail ,plz heeeelp

    C# code :
        protected string UploadFolderPath = "~/admin/Uploads/";
       protected void FileUploadComplete(object sender, EventArgs e)
            string extension = Path.GetExtension(AsyncFileUpload1.PostedFile.FileName);
            string filename = System.IO.Path.GetFileName(AsyncFileUpload1.FileName + "-" + DateTime.Now.Millisecond) + extension;
            AsyncFileUpload1.SaveAs(Server.MapPath(this.UploadFolderPath) + filename);
            img1.Src = "~/admin/Uploads/" + filename;
            Session["ImageSaved"] = filename;
    HTML code :
    <!-- java script code -->
    <script type="text/javascript">
            function uploadStarted() {
                $get("imgDisplay").style.display = "none";
            function uploadComplete(sender, args) {
                var imgDisplay = $get("imgDisplay");
                imgDisplay.src = "images/loader.gif";
                imgDisplay.style.cssText = "";
                var img = new Image();
                img.onload = function () {
                    imgDisplay.style.cssText = "height:100px;width:100px";
                    imgDisplay.src = img.src;
                img.src = "<%=ResolveUrl(UploadFolderPath) %>" + args.get_fileName();
        </script>
    <!-- java script code -->
     <div class="fileupload fileupload-new" data-provides="fileupload">
                                    <div class="fileupload-new thumbnail" style="width:
    200px; height: 150px;">
                                        <img id="img1" src="" runat="server"
    alt="" />
                                    </div>
                                    <div class="fileupload-preview fileupload-exists thumbnail"
    style="max-width: 200px; max-height: 150px; line-height: 20px;"></div>
                                </div>
                                <%--<asp:FileUpload ID="fuImg" runat="server" />--%>
                                <asp:UpdatePanel ID="UpdatePanel1" runat="server">
                                    <ContentTemplate>
                                        <cc1:AsyncFileUpload OnClientUploadComplete="uploadComplete"
    runat="server" ID="AsyncFileUpload1"
                                            Width="400px"
    CompleteBackColor="White" UploadingBackColor="#CCFFFF"
                                            ThrobberID="imgLoader"
    OnUploadedComplete="FileUploadComplete"  OnClientUploadStarted="uploadStarted" />
                                        <asp:Image ID="imgLoader" runat="server"
    ImageUrl="images/loader.gif" /><br />
                                        <br />
                                        <img id="imgDisplay" alt=""
    src="" style="display: none" />
                                    </ContentTemplate>
                                </asp:UpdatePanel>

    Hello,
    Specifically, I'd ask in the Classic ASP forum.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book: Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • Music is not playing!HEEEELP

    Music works only with earphones, but sound of calls, apps and other things is normally working.
    There is no indicator of volume in music window.Also when pressing buttons of volume nothing happens,just showing me empty level of volume(even not 0)
    Help me please...GUUUUUUYS!!!
    Have tried to reset settings, reset iPhone. The problem didnot disappeared when i changed iOS from 6.1 to 6.1.1

    I've had the same problem at one point. Turned out that my iPhone thought it was connected to a dock.. Try getting something thin and soft, wet it, and rub inside your iPhone charging port. Then try again

  • HEEEELP! I want to get English SR onto my PowerBook...

    I want to get English SR from Older Software downloads (on floppies) to an old PowerBook 5300c. I don't want to strip the resource forks on the mac (I learned my lesson last time :p), so I am formatting floppies for Mac OS Standard, right. Then I end up only having 1.1 MB avalible on disk, and I need 1.4 MB pleeeeese help

    Those diskettes actually hold 1.4 MB, if they fully formatted and do not have Bad Blocks. Mac OS X puts its invisible .DS_Store file on there, which makes it seem like you have only 1.1 or 1.2 useable. If you drag and drop the files with the Finder, you are stuck with that restriction.
    If you use the procedure Niel suggested, using DiskCopy 6 under Classic or OS 9, it will erase the disk and copy the image onto the diskette sector-by-sector. As long as there are no bad blocks or other problems, a 1.3 MB DiskCopy image should fit just fine.

  • D-link 524 HEEEELP!

    Hello,
    I have absolutely no idea how to set this thing up...can someone help?
    I have a G4 as my main computer hooked into the D-link wireless router via ethernet, a PC hooked in the same way, and a Graphite iBook with an older (I assume, the iBook was a gift) Airport Card.
    The PC person next door (who is hooked into my router, sharing my Road Runner) started experiencing typical PC weirdness whenever they get hooked up to any kind of internet connection (so glad I have Macs!), because I couldn't figure out the router's firewall or WEP settings. Tell you the truth, I haven't any idea what WEP IS! LOL!
    I had it set without encryption because that was the only way I could get a connection with the iBook via wireless. I really wanted to set it up a little more securely, but didn't have the time and I figured (for now) that I could deal with it later because my Macs won't be effected. Well they weren't, but the PC was (didn't even think of it).
    Before I had a Belkin wired router with the typical firewall and the PC has been fine.
    The firewall for the D-link is so complicated (the online setup for the router) that I don't even know if it's on!
    Can someone help?
    Just when you think you're savvy as **** about your Mac(s), something humbles you! LOL!
    Thanks

    Thank you for your answer.
    First: Without security the connection works fine. Here is what I do:
    On the D-Link, I use WEP, 128 bit, ASCII and choose my WEP key to be fx. "stigxleerbeck" without the quotation marks. I am not allowed to use quotation marks in this kind of key.
    In 10.4.3 on my iBook I choose WEP 40/128 bit ASCII and enter the password.
    It will not allow me to write "stigxleerbeck" with the quotation marks and without it doesn't work. After a while I get an "failure" window just telling m e that there was a failure during attempt to connect to the Airport network.
    Stig Leerbeck

  • Heeeelp  problem starting i tunes

    hi i tunes will not open, i think the problem lies with quick time the error message i get when i try to open quick time is
    RUN A DLL AS AN APP HAS ENCOUNTERED A PROBLEM AND HAS TO CLOSE
    When i go to control panel and open quick time i can access all the tabs apart from audio, when i do try to click on audio thats when the error message appears
    any ideas?
    i did install unlocker which enables you to delete dll files and i guess i must have somehow deleted a file however i have uninstalled quick time and reinstalled it to no avail???

    "Installation source for this product not available, verify source exisits , - The feature you are trying to use is on a network resourse that is unavaialble
    Which particular .msi file (or files) does the message (or messages) go on to say cannot be found? (Several different .msi files might be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.)

  • Please heeeelp!!

    Ok. so below is the code and in red shows syntax error ???
    please help anyone as im new to all of it..
    <?php
    // Set email variables
    $email_to = '[email protected]';
    $email_subject = 'Form submission';
    // Set required fields
    $required_fields = array('fullname','email','comment');
    // set error messages
    $error_messages = array(
              'fullname' => 'Please enter a Name to proceed.',
              'email' => 'Please enter a valid Email Address to continue.',
              'comment' => 'Please enter your Message to continue.'
    // Set form status
    $form_complete = FALSE;
    // configure validation array
    $validation = array();
    // check form submittal
    if(!empty($_POST)) {
              // Sanitise POST array
              foreach($_POST as $key => $value) $_POST[$key] = remove_email_injection(trim($value));
              // Loop into required fields and make sure they match our needs
              foreach($required_fields as $field) {
                        // the field has been submitted?
                        if(!array_key_exists($field, $_POST)) array_push($validation, $field);
                        // check there is information in the field?
                        if($_POST[$field] == '') array_push($validation, $field);
                        // validate the email address supplied
                        if($field == 'email') if(!validate_email_address($_POST[$field])) array_push($validation, $field);
              // basic validation result
              if(count($validation) == 0) {
                        // Prepare our content string
                        $email_content = 'New Website Comment: ' . "\n\n";
                        // simple email content
                        foreach($_POST as $key => $value) {
                                  if($key != 'submit') $email_content .= $key . ': ' . $value . "\n";
                        // if validation passed ok then send the email
                        mail($email_to, $email_subject, $email_content);
                        // Update form switch
                        $form_complete = TRUE;
    function validate_email_address($email = FALSE) {
              return (preg_match('/^[^@\s]+@([-a-z0-9]+\.)+[a-z]{2,}$/i', $email))? TRUE : FALSE;
    function remove_email_injection($field = FALSE) {
       return (str_ireplace(array("\r", "\n", "%0a", "%0d", "Content-Type:", "bcc:","to:","cc:"), '', $field));
    ?>
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
    <head>
    <!-- Contact Form Designed by James Brand @ dreamweavertutorial.co.uk -->
    <!-- Covered under creative commons license -http://dreamweavertutorial.co.uk/permissions/contact-form-permissions. htm -->
              <title>Contact Form</title>
              <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
              <link href="contact/css/contactform.css" rel="stylesheet" type="text/css" />
              <script type="text/javascript">
                        var nameError = '<?php echo $error_messages['fullname']; ?>';
                        var emailError = '<?php echo $error_messages['email']; ?>';
                        var commentError = '<?php echo $error_messages['comment']; ?>';
              </script>
    </head>
    <body>
    <div id="formWrap">
    <div id="form">
        <div class="row">
        <div class="label">Your Name</div><!-- end .label -->
        <div class="input">
        <input type="text" id="fullname" class="detail" name="fullname" value="" />
        </div><!-- end .input -->
        <div class="context">e.g. John Smith or Jane Doe</div><!-- end .context -->
        </div><!-- end .row -->
        <div class="row">
        <div class="label">Your Email Address</div><!-- end .label -->
        <div class="input">
        <input type="text" id="email" class="detail" name="email" value="" />
        </div><!-- end .input -->
        <div class="context">We will not share your email with anyone or spam you with messages either</div><!-- end .context -->
        </div><!-- end .row -->
        <div class="row">
        <div class="label">Your Message</div><!-- end .label -->
        <div class="input">
        <textarea id="comment"  name="comment" class="mess"></textarea>
        </div><!-- end .input -->
        </div><!-- end .row -->
        <div class="submit">
        <input type="submit" id="submit" name="submit" value="Send Message" />
        </div><!-- end .submit -->
    </div><!-- end #form -->
    </div><!-- end formWrap -->
    </body>
    </html>

    When you post a question, please please use a more informative subject line. Can you imagine trying to search for the information contained in this thread?
    Anyhow, you have improperly nested quotes -
    var nameError = '<?php echo $error_messages['fullname']; ?>';
    You cannot have single quotes inside of single quotes unless the inner ones are escaped. Try this -
    var nameError = "<?php echo $error_messages['fullname']; ?>";

  • Heeeelp!!!!!! Outlook Calendar Synchronization problem

    Hi:
    I have a curve 8900. I used as a PDA and phone, so far no BIS or BES, cause I am working in a country with no blackberry services. Until a few days ago, it was working ok synchronizing all contacts, tasks and calendar appointments. Now I cant synch the calendar, but tasks and contacts work ok. I unistalled the Desktop software, hard reseted the phone, deleted the calendar data base using the advance backup option, deleted the intellysync folder, all that without success. I dont know what I am going to do.
    I have desktop software ver 4.7
    Some body help me please, I need my calendar appointments in my blackberry.
    Thanks
    Solved!
    Go to Solution.

    Try this options
    1- reset the calendar
    http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB04950&sliceId=SAL_Pub...
    2- delete the calendar
    If you are having errors in your Calendar on your BlackBerry, and you wish to delete the entire Calendar database on your BlackBerry, follow the directions below. Make certain you have a good copy of your Calendar, as this procedure will complete delete ALL Calendar entries on your BlackBerry.
    a. Open Desktop Manager on your PC.
    b. Open up Backup/Restore > Advanced.
    c. From Advanced you'll see a split panel screen. The left panel is what is going to be backed up from your device and the right is a list of the currently existing databases.
    d. Highlight on the right side your Calendar database and click the arrow in the middle pointing to the left. This will copy the information over and prepare it for back-up.
    e. Once the back-up has completed, hit the Clear button at the bottom to erase and clean out the entire Calendar database.
    f. After it's finished, it will ask you if you want to save the back-up you've created, say yes and check the device to make sure the calendar has been properly cleared out. Now, resync the necessary contact information and you should be set to go. 
    Let me know 
    If I help you with any inquire, thank you for click kudos in my post.
    If your issue has been solved, please mark the post was solved.

  • MuVo TX SE memory problems HEEEELP!!! (plea

    After turning on my mp3 there is a no music message. I checked player information, and i can find a total memory: 0 MB. I can't format disc. When I want to explore the player there is a message, that I have to format it. Please help.

    A format probably won't help - you will need to reload the firmware and select the check box that says Format Data Area. PB

  • I just bought a 2 gig USB, AND ITS EXTREMELY SLOW HEEEELP!!

    i just bought a 2 gig usb and its EXTREMELY slow, it takes like 1 hr to transfer 700 mb, thats ridiculously slow, is there anything i can change for it to become faster?
    its wierd, i can tranfser files from the usb to my mac pretty quick but from my mac to the usb it takes a LONG time, any ideas?
    PLEASE HELP

    Extended Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

  • I NEED HEEEELP

    I am not a web designer. I do not claim to be a web designer.
    I am attempting to build my website in edge animate and I am watching the tutorials, but I can't seem to get more than animations. I basically have one page with six buttons (png images right now). I just want the six buttons to get a little bigger on mouseover and when you click the button and the content appears.
    For example: When the fedora is clicked a simple round cornered box with a simple about the author paragraph to pop in. when another menu icon is clicked I just want paragraph to drop off the page and the next page item to pop up
    I need help... I just want to get my portfolio website done....

    If MU is too limiting for you (and it is, Muse is a consumer level product aimed at non-coders), look at Dreamweaver. 
    DW is pro-level software for building everything from static HTML sites all the way up to enterprise level dynamic sites.  You're limited only by your coding skills & imagination.
    CSS3 animation is eye candy & fine when minimally used.  However, I wouldn't attempt to build an entire site with Adobe Edge Animate simply because the animations are not supported in older browsers (pre-IE9) which many people still use.
    To reach the widest target audience, use HTML for content with CSS for layouts & menus.  You don't need animations to create interactive menus either.  See link below for an example of a pure CSS menu with rollover effects.
    http://alt-web.com/DEMOS/CSS-Horiz-menu-2.shtml
    Good luck with your project,
    Nancy O.

Maybe you are looking for