HEELP! Everything is PINK!!! [solved]

Everything is ping: My gdm is pink, my panel is pink, even archlinux board is pink.
When did that happen? I was playing the moment of silence with wine and after the 5 start of the game the problem appeared. I have no idea how to fix this so I'm reling on you!
Here are screenshots:
P.S.
I have no idea why I wrote ping instead of pink...
EDIT:
It was a monitor issue. Everything is fine after cable reconnect.
Last edited by Dheart (2007-06-24 11:10:21)

pjock wrote:Have you tried reconnecting the cable to your monitor? The screenshots look perfectly fine, non-pink here.
God bless you!!!!
You were right! It was a monitor issue!
Thank you for the reply! Reconnecting the cable worked.

Similar Messages

My Ipod 2nd generation has a problem. I'm not able to charge it and the screen has a discolored look...everything is pink.

There is a problem with my IPod Nano (2nd generation). It doesn't work at all. The screen is discolored...everything is pink/red.

Groovy.
Try restoring it, if you can.

G4Ti4200-TP64 Everything is pink!

Hello there!
I don't know what's going on, I just know I need help! My MSI G4Ti4200 had been working great for four weeks (until 3 days ago), when all of a sudden the colors totally changed.
Already when I boot the computer, the text is pink. My background color, which had been white is pink and stays pink, no matter what I do! All colors are off! i don't know what it could be and/or how to fix it!
Is there anybody out there, who could help me, please!!!???? ?(
I didn't get any warning messages and everything else is working, no conflicts, nothing,...
Please HELP!
CU, Morgaine

Have you tried a different monitor? (or even hooking up to a TV if your card supports TV Out?)
It sounds to me like your monitor has lost one of its colours (green, most likely).
Check your monitor cable to see if it's connector is loose, or if the connector has bent pins. Try moving/fiddling with the cable where it connects to the monitor / where it connects to the video card and see if the colour comes back correctly - even if for a brief flash - that will confirm the monitor is the problem.

Everything is pink!

after i downloaded i-tunes 8, everything is now highlighted in pink! and the left hand side where it lists playlists, music, tv shows, etc. thats suposed to be a light grey is now dark grey and the text is a faded white. even when i go to the store and look at the top songs, everything is highlighted in pink. its really weird, it went away for like a day, but now its back! i hate it, hopefully someone can help. i've tried to re-install it, but no luck.

Change the monitor's bitdepth to 32 bit from the Control Panel.
(38365)

No covers - but everything in pink

Help please!
I am facing two problems -
a) the whole iTunes background turned pink for some reason... And let's point it out that way: It is defenitely not my most desired color. Any suggestions?
b) although I am importing original CD's it never displays the cover, although I have iTunes search for the details.
Thanks for any support...
Best

What about reading this: http://www.head-fi.org/forums/f15/cover-art-itunes-cant-find-271860/
This will give some suggestions

Camera Is Pink and inverted??

Hi I have had my iPhone for like about 10 months and for about the last month every so often when i go to take a picture my camera sees everything in pink and it seems like it is inverted. it is hard to explain but it doesn't happen all of the time but it does happen. next time it happened i will get a pic of it and post it. but i was wondering if this is a known problem or should i bring it into an apple store.
Thanks,
Jeff

Here are a couple of articles from the apple support website that might help out.
http://support.apple.com/kb/HT1737
http://support.apple.com/kb/HT1414
You might need to reset and or restore the iphone to resolve any software issues.
Hope this helps.

Pink Screen iPad

I have an iPad2 wifi only.i did not drop it or had any water dripping on it.now when i try to do anything on the ipad everything turns pink. please help.my iPad is just 5 months old.

Try a reset,
Reset your iPad by pressing the 'Sleep' and 'Home' button at the same time for about 15 seconds or so. Your iPad will then go through a reset / reboot procedure and will be ready for use within about a minute.
Don't worry about doing this as you will not lose data or settings.
Good luck and do report back.

IPad2 Camera - Pictures/Videos Pink-Tinged

I'm not too keen on the colour rendering of the front/rear cameras on my brand new iPad2 - everything is pink-tinged. I thought that perhaps it was the lighting indoors so went outside and it's exactly the same.
Anyone else get this problem?
Take it in to the Apple Store for a swap?
If I do that does anyone know if they will transfer everything on it for me or do I have to do that myself through iTunes?
Dammit - I had the thing personally engraved too...grrr.

Well I'm glad I'm not alone in this matter. There are other threads where the colours were completely distorted and they recommended unindtalling Skype to see if it helped, but I have never used it anyway.
I just received a call from Apple Support and they suggested a Restore, which I have just done and it didn't work.
There other suggestion was to take it into an Apple Store to see if they can adjust it and they also mentioned that Camera tuning may be included in a future software update of IOS.

Display Turns Pink

Yesterday for no apparent reason when I logged back into Yosemite after my computer went to sleep, everything turned pink. I am not the only one to have this problem. It has been observed in Mavericks as far back as July of this year. Though I am happy it is not an issue with my monitor I would still like to correct this issue. Any suggestions would be appreciated.

Hey there William,
It sounds like your monitor is taking on a pink hue when waking from sleep. I would use these steps from the following article, named:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Cannot Use 1571 on Hub Phone - Tried Everything!

I really hope someone can help! I have activated 1571 on our phone line.
I have logged into my home hub account and it says that calls that are left unanswered or the phone is engaged, will go to voicemail.
Everytime I dial 1571 - I get a message saying "Your phone number is withheld, please dial 1470 before you dial 1571 so that we can take your order".
Everytime I dial 1470 before 1571 - it just repeats the message above.
If you ring the home hub number it says "You cannot leave a message right now".
I have tried everything - can anyone solve this problem? It is working fine on the main phone line!

To change the setting for withholding your number go to https://service.btbroadbandvoice.bt.com/bbv/online/consumerMyAccount, log in and select the Caller ID settings. This will allow you to set up withholding your number or not on your Broadband Talk number.
Peter

HP officejet Pro L7590 Prints 1/2 of the text line on several lines of document

I got an email for diagnosing the printer and I was prompted to install updated drivers and I did that and now when I print the test page I get several lines of text that only prints the top or bottom 1/2 of the letters across the page, I Printed a self test diagnostic Page and it printed everything in pink but it did not print 1/2 letters across the page like the test page,Then I printed a Print quality page and it did the same as the test page and it did the same as the test page, then I tried to calibrate the line feed thinking that may correct the problem but did not, What what can I do ????
Irven
This question was solved.
View Solution.

Hi mmcmret8,
Thank you for your reply! It is possible the printheads might need to be changed, at this point I would recommend to please call our phone support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Best regards!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

3130CN Ink Leaking

Hi my offices uses a 3130 CN for colored printing.
Today we kept getting an error message of 077-901, 077-90 & 077-102. I cleaned all the rollers and the error message went away.
Now the pages are coming out covered in ink. I opened the front panel and there was blue ink everywhere, especially on the black liner. I cleaned it and replaced the blue toner cartridge. Then it happened with yellow. I again replaced the yellow and now everything is pink.
Any idea what is wrong? I'd appreciate any insight!
Thanks!

Hello there! Welcome to the forums @justjohn49,
I read about the ink issue you are facing with your Photosmart C310a model, and wanted to reply back to you with my own suggestion.
I would recommend cleaning up the ink the best you can with a lint free cloth and needed, dampened with bottled/distilled water. Also, check out the steps in this guide and also clean the contacts from the cartridges to see if that helps. Disregard the name of the guide, it's the steps inside I suggest. I am also not sure how bad the issue is, however, if it continues, you may be looking at a new printer. HP may have a trade in option for you, if you wish to call them to find out, I will leave their contact info below.
'Cartridge Failed' or 'Cartridge Not Compatible' Error Message Displays on the Computer
HP's contact info:
If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Best wishes, I hope you have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

0404USB Pops and Crackles

I have just purchased the 0404 USB audio interface in hopes that it would solve problems I was having with the audio for Proteus X and M Audio Key Rig. So far no luck. My computer is a Gateway 7330GZ laptop running a Pentium 4 at around 3ghz with 512mb of memory. All of the system details exceed the specs for both the 0404 USB Audio Interface and Key Rig. Yet no luck in getting Key Rig to actually produce decent sound for any length of time. Too many crackles, pops and eventually almost straight pink noise. If used with ASIO4All key rig crashes after running for a few minutes. I am sure I could use some additional RAM but do not want to keep buying things under the hopes that one of them eventually will solve my problem. The "onboard" audio on my laptop uses a Conexant Audio driver. I can get Proteus to sound OK but the latency is unacceptable.
Any help would be appreciated. Thanks.
Message Edited by wagscpa on 03-31-200703:50 PM
Message Edited by wagscpa on 04-01-200707:58 AM
Message Edited by wagscpa on 04-02-200706:55 AM

I have downloaded and installed the latest drivers.
The 0404 is connected directly to the computer's USB port and reports USB 2.0 as its speed.
I have installed the production tools bundle of software.
Sonar's playback of audio on one of the sample projects works great.
Have adjusted latency all over the place and have not been successful with M Audio Key Rig. I can get Proteus X to work with significant latency but then I cannot play it properly because the delay is too great.
I have mostly used 44K and 48K sample rates, but I have tried all of the sample rates and latencies available.
I have stopped all unnecessary services, used msconfig to run only a limited array of drivers and programs, disabled the driver for the onboard audio card, and I have then used msconfig to load everything. Nothing solves this problem. I have uninstalled ASIO 4 ALL and ASIO2KS which are other ASIO drivers that I had previously downloaded and used. I have downloaded an ASIO test signal and it has the same problems which is that when a sine wave or a sweep is selected it crackles and pops. You can hear the sine wave frequency and/or the sweep but not without random crackles and pops. I used DPC latency checker and disabled almost everything in Device Manager, one item at a time and latency checker would never render a good report if anything was using the ASIO driver. I could run programs like Microsoft Excel, that do not use ASIO and latency checker would render a good report. But the minute I started a program that used ASIO latency checker would turn its green bars to yellow and red indicating that the system would not playback audio well.
I can play back non ASIO audio just fine. Unfortunately I only have a few days before my return period expires and if I cannot resolve this in the next few days I will have to return the product.
Thanks for the help.
Wags.

Please help! How do you MMS with the Red BB Curve 8330m (4.5.0.131 software/firmware) on Sprint ?

Greetings!!!
I'm a newbie to BlackBerry devices but a long time user of cell phones and I have just one question which I hope isn't a difficult one to answer. I don't know if I'm missing something here, but how do you send an picture or photo via MMS? All I see in my message options is SMS text.
I just got the new Red BB Curve 8330m with the 4.5.0.131 software/firmware from Sprint.
I did a search here but didn't find an answer.
TIA for any help here!
Mark
(Ohio)
Sprint Simply Everything Unlimited Plan
Solved!
Go to Solution.

No problem, if it wasn't for questions there wouldn't be forum, Right?
So you checked the firewall, and you can receive, that means you have the application,
Have you ever done a battery pull or sent service books since receiving the device?
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Red static using Apple's mini-Displayport to DVI Single Link adaptor

Here's the problem :
The adapter from Apple I got is the 30$ (or so) DVI-D Single Link (nine pins active on the side with six pins non-active in the center).
My Dell 2408WFP monitor got two DVI-D Single Link connectors.
I did my test with two different cable : one DVI-D Single Link and one DVI-D Dual Link. Both cable are working just fine since I can hook either my older Macbook Pro Core Duo or my PC to the monitor using them.
But when I 'm trying to use my new Macbook Pro Unibody 13" with the mini-Displayport to DVI adapter I always get red statics : one pixel dots flickering randomly all over the screen. The picture is there, though, and my computer is able to recognize the display and its native resolution (1920x1200). Sometime, the display seems to lose the signal and shows only white noise.
Any idea, similar experience?
P.
Thanks for everything,
P.

Problem solved here, really. Nothing to do with Apple. Everything to do with Dell.
So I got a replacement monitor (a second one) from Dell regarding another problem with the Displayport connexion. It fixed this problem. I then tested the same mini-Displayport to DVI adaptor on this new replacement monitor : works flawlessly. No problem whatsoever. No static. No suddenly going in sleep mode. No random disconnection. So the problem was the monitor : EDID profile, maybe firmware. See below.
Here are more details which I got using SwitchResX. I hope it can help others for diagnostic.
The monitor that was ALL wrong was : a Dell 2408WFP, EDID version 1.3, product code 10912 (2AA0) (A02A) (which means, I think that it was REV A02A : you CANNOT rely on what's written on the sticker on the back of the monitor for that info especially when you get a replacement monitor, use SwitchResX).
The new monitor that is WORKING (with everything : Diplayport connexion as well as mini-Displayport to DVI adapter) : a Dell 2408WFP, EDID version 1.4, product code 11168 (2BA0) (A02B) (so I guess is REV A02B).
Notice the difference in the EDID version AND in the REV version.
If you have a Dell monitor, same model (2408WFP) and are experiencing problems with your connexions, check those info, call Dell for a replacement.
Thanks for all your feedback and suggestions. I'll post this on Dell forum as well.
P.

HEELP! Everything is PINK!!! [solved]

Similar Messages

Maybe you are looking for