Heilp me in date as defalt date as prompt

Hi all,
I am working in SQL 2000 data base,
i want to create the prompt in universe as condtion...current date as defalt prompt:..
EX:- end user must not take date as manually .. it must take defalt date as sys date
Regards,
Venki

Hi Venki,
1. Create a Object with Current_Date() and name it as Today.
2. Create an Object named Prompt
@prompt('Description eg Enter Date','datatype','class\Today','multi/mono','free/constrained')
3.Pull the Object in the Query panel.
Regards
Prashant
Edited by: Prashant Sathyapalan on Oct 13, 2008 1:49 PM

Similar Messages

Data Federator - View Data in DF

Hi,
Can we view data in Data Federator if data source is SAP BW

>
> Although you may have tested the connection, check your "leselect" log file
>
Checked in leSelect.log
Could not start server: Connect to SAP gateway failed
>
> Is it a case of resolving the DNS name? check in BW via RZ11 that the name is fully qualified as that is what DF is expecting.
>
Tried. However what parameter supposed to be entered. should it be I_RFC_DEXTINATION ?

Can't view changed data in journal data

Hi,
I have implemented JKM Oracle 10g Consistent Logminer on Oracle 10g with the following option.
- Asynchronous_mode : yes
- Auto_configuration : yes
1. Change Data Capture -> Add to CDC, 2.Subscriber->subscribe (sunopsis),
3. Start Journal
The journal has been started correctly wothout errors. The journalized table has always the symbol "green clock". All is gook working.
And then i inserted 1 record in source table, but i can't view changed data in journal data. I can't understand why journal data was generated.
There are no errors.
Help me !!!

Did your designer was on the good context ?
Look the list box at the top right of the Designer interface.
You must have the same as the one where you define your journalization.

Historic and Current data for Master data bearing objects

Hi All,
We are trying to implement type 2 dimensions for all the master data bearing characteristics, where we require historic and current data available for reporting. the master data can have a number of attributes and all of them can be time dependent. We are not getting any 'datefrom' or 'dateto' from the source system.
For example:
For Example: The table below shows data entering BI at different dates.
Source Data day of entering BI
MasterID ATTR1 ATTR2
123506 Y REWAR day1
123506 N REWAR day4
123506 Y ADJUST day4
123506 N ADJUST dayn
The field 'day of entry into BI' is only for your understanding; we do not get any date fields from the source. SID is the field we are generating for uniqueness. It is a counter. EFF_DATE would be the current date for all the data. EXP_DATE would be 31.12.9999 until the attributes change. SID and MasterID together would be the key.
On day 1 the following data enters BI,
day 1
SID MasterID ATTR1 ATTR2 EFF_DATE EXP_DATE
1 123506 Y REWAR 2/10/2009 12/31/9999
On day 4, 2 data records enter with same PID,
SID MasterID ATTR1 ATTR2 EFF_DATE EXP_DATE
2 123506 N REWAR 2/13/2009 12/31/9999
3 123506 Y ADJUST 2/13/2009 12/31/9999
the EXP_DATE of the record of day 1 needs to be changed to current date.
Also there are two records entering, so latest record would have EXP_DATE as 31.12.9999. And the EXP_DATE of the first record on day 4 should change to the current date.
so the following changes should happen,
CHANGE
SID MasterIDATTR1 ATTR2 EFF_DATE EXP_DATE
1 123506 Y REWAR 2/10/2009 2/13/2009
CHANGE
SID MasterID ATTR1 ATTR2 EFF_DATE EXP_DATE
3 123506 Y ADJUST 2/13/2009 2/22/2009
On day n, one data record enters with same PID,
SID MasterID ATTR1 ATTR2 EFF_DATE EXP_DATE
4 123506 N ADJUST 2/22/2009 12/31/9999
The change is ,
CHANGE
SID MasterID ATTR1 ATTR2 EFF_DATE EXP_DATE
3 123506 Y ADJUST 2/13/2009 2/22/2009
The data expected in P-table is as below, on Day n or after Day n, untill any other record enters for this MasterID,
1 123506 Y REWAR 2/10/2009 2/13/2009
2 123506 N REWAR 2/13/2009 2/13/2009
3 123506 Y ADJUST 2/13/2009 2/22/2009
4 123506 N ADJUST 2/22/2009 12/31/9999
Has anyone worked on type 2 dimensions earlier? Or any ideas to implement this logic would be appreciated.
Regards,
Sudeepti

Compound the Master ID with eff date and other attribute as superior objects
so you will get P-table as
ATTR1 ATTR2 MAT ID
1 2/10/2009 2/13/2009 123506 Y REWAR
2 2/13/2009 2/13/2009 123506 N REWAR
3 2/13/2009 2/22/2009 123506 Y ADJUST
4 2/22/2009 12/31/9999 123506 N ADJUST

Not able to change the data of test data containers in production system

Dear All,
We have created eCATT scripts in Development SolMan System and moved the transports to Production SolMan System. Customer wants to change the data at Test data containers and run the scripts in production system but we are not able to edit the data.
May be the reason is SCC4 transaction code has set the below option.
Changes and transports for client-specific Objects
u2022 No changes allowed
Customer doesnu2019t want to change the above option and wanted to change the test data containers to give different datau2019s and run the eCATT scripts.
Could you please let me know the solution for this?
Your help is really appreciated.
Thanks,
Mahendra

eCatt has the feature where you don't need to transport the scripts or test configuration to our target system. We can keep all our scripts and test data in Solman and run this script any other system in your landscape using the System data container and target system.
Maintain the production as one of the target system in System container in Solman and point that system while running the script. Change the test data in Solman to run this script.
Let me know if you need more information
thanks
Venkat

The Difference between "Cell Data" and "Dimension Data"?

What is the difference between the tab "Cell Data" and "Dimension Data" in SSAS?

Article quote: " SSAS provides the way to secure analysis services database/cube data from unauthorized access. Analysis services provides secure access by creating object called "roles". After creation of role, user's windows login credential can be used
to enroll into particular role because analysis services identifies user from their windows login credentials . You can protect your data in roles at two levels:
1) Dimension level
2) Cell level
If user has been assigned more than one role, analysis services loop through all assigned roles after login. Analysis services finds all permission level for the particular user and union all the permission levels.
If two roles has contradictory access for user then particular access will be allowed. Suppose role1 says Australia data access and role2 denies Australia data access then access to Australia data will be allowed. "
LINK:
http://www.msbiconcepts.com/2010/10/ssas-data-security-dimension-and-cell.html
Kalman Toth Database & OLAP Architect
IPAD SELECT Query Video Tutorial 3.5 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Diff B/W master data and transaction data

Hi all,
What is the main Diff B/W master data and transaction data. give me some example ?
Thanks in Advance
Krish...

hi krish,
MASTER Data is the data that exists in the organization like employee details, material master, customer master, vendor master etc. These are generally created once.
Master data are distributed throughout the company, they are often not standardised and often redundant. As a result it is very costly to offer efficient customer service, keep track of supply chains and make strategic decisions. With SAP Master Data Management (SAP MDM) these important business data from across the company can be brought together, harmonised and made accessible to all staff and business partners. As a key component of SAP NetWeaver, SAP MDM ensures data integrity via all IT systems.
Regardless of the industry, companies often work with different ERP and Legacy systems. The result: the business processes are based on information about customers, partners and products which is displayed in different ways in the systems. If the data are recorded manually, there are more inconsistencies: some data sets are entered several times, others cannot be retrieved by all divisions of the company.
As corporate applications are becoming increasingly complex and produce ever greater amounts of data, the problem is intensified further. Nevertheless, your employees must work with the inconsistent data and make decisions on this basis. The lack of standardised master data easily leads to wrong decisions, which restrict efficiency and threaten customer satisfaction and profitability.
In a word: in order to save costs and ensure your companys success it is necessary to consolidate master data about customers, partners and products, make them available to all employees beyond system boundaries and use attributes valid company-wide for the purpose of description.
TRASNACTION Data - These are the business documents that you create using the master data - Purchase orders, sales orders etc
http://help.sap.com/saphelp_nw2004s/helpdata/en/9d/193e4045796913e10000000a1550b0/content.htm
Regards,
GNK.

Query on fetching the no.of days between Invoice date and due date in rtf template embedded BI Publisher Report

Hi Experts,
We have a requirement to fetch the value of 'No of days' between Invoice date and due date (Two variable date fields on the template) in an Analysis.
Please let me know the procedure of how to achieve the same.
Regards,
Rev

it's good for ideas but implementation a bit different
Oracle Business Intelligence Publisher Report Designer's Guide
This function provides a method to get the difference between two dates in the given locale. The dates need to be in "yyyy-MM-dd" format. This function supports only the Gregorian calendar. The syntax is as follows:
<?xdoxslt:date_diff(‘format’, ‘YYYY-MM-DD’, ‘YYYY-MM-DD’, $_XDOLOCALE, $_XDOTIMEZONE)?>
where
format is the time value for which the difference is to be calculated
Example:
<?xdoxslt:date_diff(‘d’, ‘2006-04-08’, ‘2006-04-01’, $_XDOLOCALE, ‘America/Los_Angeles’)?>
returns
-7

DSO upload and no data in Active data table

Hi Experts,
I have a strange problem.I have loaded data to DSO from DS in BI7. It has the further uplaod to cube.I have activated the DSO and it went sucessfull and had Request ID generated. It has added and transfer records available like 150000 records as I have done full upload. strangly I cannot see any data in Active data table.
Pls advise how can I check the data I am doing some mistake.I have data mart status for this DSO. the deletion of the DSO and reloading could that create the data not visible in DSO even after activation
Pls advise.
Tati

Hi,
I believe this got something to do with the display setting.. After displaying the data, get into the settings menu and look for Layout option --> display --> see if there is any default setting applied.. change this setting to something else.. create a setting with all the columns dragged & dropped.. These are the options you can try..
If this did not resolve.. please try displaying the data from SE16 transaction and post us the results..
Thanks,
Naren

Problem while data processing TRANSACTION data from DSO to CUBE

Hi Guru's,
we are facing problem while data processing TRANSACTION data from DSO to CUBE. data packets processing very slowly and updating .Please help me regarding this.
Thanks and regards,
Sridhar

Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (give BIrequest name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. See if its accessing/updating some tables or is not doing anything at all.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.
You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the cube.
Thanks,
JituK

Date fields are showing as / / in DSO for blank dates or no dates

We are loading flat file data to DSO and the date fields are showing as / / in DSO for blank dates or no dates in the flat file source system. We don't want to see this / / and instead of this, we would want to this field in DSO to be in blank. Please help how to achieve this. Is there any way to do this transformation. If yes, then can you please provide the sample coding.
Advance Thanks,
Christy

I have added the code and data loading is successful. while DSO activation, it is failing. The error message is,
Value '#' of characteristic 0DATE is not a number with 000008 spaces.
It seems that we need to change the code. Can you provide me the corrected code please. Thanks.
Christy

Powerpivot Error on Refresh -- "We couldn't get data from the data model..."

I'm using Excel 2013 and Windows 8.1. I have a spreadsheet I've been using for over a year, and I've just started getting this error message when I try to refresh the data.
"We couldn't get data from the Data Model. Here's the error message we got:
The 'attributeRelationship' with 'AttributeID' - 'PuttDistCat9' doesn't exist in the collection"
Any idea how I can fix this problem? I haven't changed anything related to that particular attribute. All the data is contained in separate sheets in the workbook, so there are no external sources of data.
Thanks.
Jean

Thanks for all the suggestions.
I found a slightly older version of the spreadsheet that still refreshes properly, so I don't think I have any issues with the version of Excel or Power Query. (I've had this same error before, and I believe I applied the hotfix at that time.)
I think this problem started after I updated a number of the date filters in the pivot tables. I haven't made any changes to the data model, and the only updates I've made were to add data (which I do all the time), and to change the date filters on
the pivot tables.
As suggested, I added a new pivot table querying one table (the table with the attribute that shows up in the error message), and it worked fine. I can also refresh this pivot table.
Then I tried adding a pivot table which went against several tables in the data model (including the table in question). The pivot table seemed to return that data properly. However, when I tried to refresh it, I got the same error message ("we
couldn't get data from the data model...").
Dany also suggested running the queries one at a time to see which one is in error. Without checking all the pivot tables, it appears that any which use the table "HolePlayedStrokes" generate the error (this is the table with the attribute
mentioned in the error message). Pivot Tables without that particular table seem to refresh OK. Unfortunately, that is the main table in my data model, so most of the pivot tables use it.
Any other suggestions? I'd be happy to send a copy of the spreadsheet.
Thanks for all the help.
Jean

Why does my phone use data with cellular data turned off?

I have problems with my iPhone 5 using data on its own. It usually happens at night, with all the apps closed and plugged in to charge (should be connected to my wifi). Recently, I started turning off my cellular data any time I'm at home out of desperation to save my data. Last night, my phone used 6MB of data with my data off, plugged in. I use My Data Manager to track, it matches up with AT&T's record of my data usage, so I'm pretty sure the app is not wrong. I have the 200MB plan, so I have to be very careful and it's incredibly frustrating to wake up and find 6MB gone when cellular data was turned off. Does anyone know what's going on? I haven't bothered calling Apple or AT&T, I never get anywhere with either one.

I'm not familiar with My Data Manager but from the name I would think it would tell you what app or apps have used the data and that might help narrow down the problem. If it doesn't have that information, you can go to Settings > Cellular > Use Cellular Data For and that shows usage by each app and if you click on System Services in that list it will also give details of that usage. The numbers are since you last reset the statistics (bottom of that screen). With a little time and detective work you may be able to identify the cause.
Also, there have been many discussions on various internet forums of AT&T (and other) reporting of the time of data usage not matching the actual time of the use. The usage numbers over a number of days for example are accurate but usage reported at 2AM may actually be a summary of some types of use that happened the previous day.

Power Query/Data Management Gateway data refresh not working

Pretty new to o365/Power BI, but here's what I've got going on (hopefully someone can help me out):
I created a data management gateway and data source. The data source says it's online in the PowerBI admin center, and it seems to be working correctly. I can open Excel 2013 on my desktop (logging in as my trial o365 account which has Power
BI associated with it) and connect to the data source via Power Query using the oData option. I make sure to import the data into the model, and then open up the PowerPivot window and create a simple pivot table using the data in the model.
that all works just great. The problem comes when I upload the workbook and try to update it. I've tried a few different ways.
1. When I try to manually refresh the workbook by opening it in my o365 site and going to data-->refresh I get the following error:
      An error occurred while working on the Data Model in the workbook. Please try again.
      We were unable to refresh one or more data connections in this workbook.
      The following connections failed to refresh:
      Connection: Power Query - dbo_DimProductCategory
      Error: Out of line object 'DataSource', referring to ID(s) 'a75593f3-c34d-4f83-9458-49aa2cece164', has been specified but has not been used.
      The following system error occurred: Class not registered
      The provider 'Microsoft.Mashup.OleDb.1' is not registered.
      Power Query - dbo_DimProductCategory
2. When I go into Power BI and go to "Schedule Data Refresh" for the workbook, I get the following error:
      Sorry, the data connections in this report arenâ€™t supported for Scheduled Refresh.
      Technical Details â–¼
      Correlation ID: B3CE4B10-2137-E593-6FCF-189B73465190
      Date and Time: 03/31/2014 06:20:39 PM (UTC)
Any help would be greatly appreciated. If you need additional information, I'd be happy to provide it.

Hey Guy,
Thanks for the reply.
The "data source type" of the data source in Power BI is "SQL Server" (there was only that and Oracle available to select from)
The "data source type" that Power Query is using in Excel is "From oData Feed"....which is using the Power BI data source....which is using the data management gateway.
A few follow up questions if you have a second
1. Do you know when PowerQuery data refresh will be supported? (just a general idea....weeks, months, next year?)
2. Is there any other way to connect to (and be able to refresh) PowerBI data sources referencing "on prem" data via the data management gateway? I tried using the oData feed URL in non-PowerQuery areas of excel (excel data tab, PowerPivot directly)
but it didn't work. If there's some other way to connect to and refresh on prem data, i'm all ears :D
Really appreciate your help, thanks for taking the time.

Report for viewing Sales order no against delivery date & actual GI date

Hi Experts,
Is there any report for viewing Sales order no against delivery date & *actual GI date*
Because in VL06F , i can only able to get planned GI.
Please guide regarding the same where i can get 'ACTUAL GI DATE ' against above combination .
Regards,
Sujit S.

dear Hrishi,
i followed your suggestion, but couldn't get desired results,
here i can get planned GI date, where i wanted to get Actual GI date for complted deliveries,
thanks for your valuable reply.
@ G. Lakshmipathi ;-
i think i will need to develop z-report for fetching the data from the tables
VBAK (to get sale order reference) and
LIKP (to get delivery and actual GI date)
thanks for your reply,
Regards,
Sujit

Heilp me in date as defalt date as prompt

Similar Messages

Maybe you are looking for