Heip in using HP 4300 series 4-in-One injet printer on MacBookPro

Hi:
I have an hp 4 in one inckjet printer 4300 series in good working condition. I've recently bought a MacBookPro laptop. I have the upload cd but the computer says. "You can't open the application HP Installer because PowerPC applications are no longer supported". How can I install the software to use my printer?
Can you please walk me through step by step. I'll highly appreciate your help.
Thanking yoy in advance,
Vinny

Hi @VINNYK
What version of Mac to you have on your computer? I suspect the CD you are tyring to install is not compatible with your version of OS X. Please take a look at the appropriate link below;
OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
OS X v10.8 Mountain Lion: Installing and Using the Printer on a Mac with Mountain Lion
OS X v10.7 Lion: Installing and Using the Printer with Lion
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

How to use Epson Workforce 635 all-in-one to print from iPad2?

Have no idea how to connect iPad2 to the printer and was unable to find printer when chose Print. Wireless networking has been set up (tested w/ a PC). Pls help.

That printer does not support AirPrint, so you cannot print natively from the iPad. You'll have to use a third party app like print n share or Printopia. They are in the app store.

Using HP psc 1210 All-in-One to print from Wordperfect 11

I just purchased a new HP 64-Bit computer and a new copy of Wordperfect 11. I hooked everything up and installed the new program, but I can't get my printer to print correctly. I tried installing all the newest updates and any service packs offered for Wordperfect but it still won't work. It will print, but the image is distorted and it only does it with the Wordperfect program. Please help since I use the program for my small business.

No one can help me!?

I have o s x 10.7.5 using hp laser jet all in one 3050 printer. when using google chrome I can't print. works with safari.

When using google chrome I am unable to print from this search engine. I can print from Safari.

If the printer works with Safari and other programs, then the problem is with Chrome. Ask their tech support for help.

Creating and using new Document Series in SAP B1- URGENT

"I want to use two different series in the same period in SAP B1 other than the default series. But whenever I am trying to do it i am unable to use both the series and at one time. Only one series is accesible even if I use the option "set default series for certain users."
Further elaboration - I handle retailers and wholesellers in my business process.I want to use two series Retail and Wholesale for the two different classes whenever I make an Invoice. So that the class of the document is seperated by the series.

Debraj,
In Admin - System initialisation - Document Numbering go to relate series document and choose A/R Invoice by double clicking it. Now the Series A/R Invoice will open. In that window click on new. It will go into Numbering series set up. Here go the the particular row in the first column give the series name as Wholesale and enter the first no.and the last no.and give the period indicator as default. Now right click on that row and addnew row you will be taken to the next row where in again you can name a series and the last and the first no.
Hope this answers your question.
Nagesh.

Can I print from my 4s iphone using my 6500 series hp photosmart all in one 709e printer?

Can I print documents from my 4S Iphone with my HP 6500 series all in one 709E printer? It states that it cannot locate printer when I attempt to print.
Thanks,
Todd

If the printer is not AirPrint compatible but is wi-fi capable, you will need to get one of the many wi-fi printing apps available at the app store. HP has an app. Some of the wi-fi printing apps have more capabilities than others.

Floppy Disk drives for Satellite Pro 4200 and 4300 series

I have four Satellite Pro laptops - a 4340, a 4310, a 4270 and a 4280 and I'm having difficulty getting the 4310 and the 4270 to recognise a particular FDD. My understanding was that Mitsumi D353G FDDs were compatible with these 4200 and 4300 series laptops but I can't get the 4270 and the 4310 to "see" them. They will both however "see" an alternative FDD I have - a Pansonic JU-226A202FC but I only have one of them and two laptops needing a replacement FDD. I have tried a D353G that I know works (from my 4280) in both the 4310 and the 4270 but to no avail. I'm keeping an eye out for another Pansonic JU-226A202FC FDD on ebay but no luck so far. It's so frustrating as I'm sure a D353G FDD should work in the 4270 and 4310 and I have two spare ones which I wanted to use. I've looked in TSETUP.exe and can see no settings I can change to make these laptops see the D353G FDDs so any help or insight greatly appreciated. Does anyone out there have a 4270 or a 4310 successfully running a D353G FDD or, is this a quirk and these two particular models were only made to work with a Pansonic JU-226A202FC FDD not the D353G FDDs? Any clues?

Hello
Unfortunately I am not technician but I assume that there is obviously some problem with compatibility. It is possible that pin assignment is different and you can not use them. If you want to have a precise explanation you should contact technicians. I am pretty sure that they have motherboard schemes and can give you a proper explanation and advice how to handle with this problem.
Good luck!

Can I use my Gaming series as an output device for another computer?

Hello,
I tried to search for some similar topics but nothing showed up, so I apologize in advance if this has been asked before:
Can I use my Gaming series as an output device (monitor) for another computer?? I am searching for use my Gaming series as a monitor for a more powerful machine. And if so how can it be done ?
Thanks,

What is your AiO model?

Which type of ADC is used in M Series, S Series and C Series DAQ Cards?

Hi
I want to know which type of Analog to digital converters(ADC) are used in M Series and S Series DAQ Cards. I know that DSA Cards and some C series are using Delta Sigma ADC. What about the ADC used in non delta sigma C Series modules. Why Delta sigma ADC is not used in M series and S series DAQ cards.
Regards
Samuel J

Hi Samuel.
The ADC type used is Succesive Approximation ADC. You can refer to the following links for your reference.
http://digital.ni.com/public.nsf/websearch/32FD9AA817D0EBE68625708C005E1B26?OpenDocument
Hope this helps.
Thank You.

Use the same series

I need to use the same series in the A/R Down Payment Invoice and in the A/R invoice. How may I to do it?
Regards
Oscar.

For a new company you can set Permit More than One Document Type per Series under Administration / System Initialization / Company details. Then you get different possibilities to defining document numbering.
But you should be aware of the fact that in version 2007A the authorizations for series groups will not work properly with this setting.

Does CDRW/DVD from Satellite Pro 4600 fitting a 4300 series?

Does anyone know if the CDRW/DVD ROM drives that were fitted to some Satellite Pro 4600 notebooks will fit and can be made to work in the Satellite Pro 4300 series notebooks? Please don't reply by saying contact my local service partner!

Hi
I am not 100% sure but I believe that it should work but if nobody gives you a precise answer try to ask service partner in your country. Unfortunately there is no public document about hardware upgrade.

Need SP_TN for specific user must use specific document series and warehouse in Marketing Documents

Hi experts,
   I need SP_TN for specific user must use specific document series and warehouses in Marketing Documents SAP B1.
   Kindly give solution ASAP.
Thanks in advance

Hi Nagarajan,
   It show (1) Not allowed to add PO.
   I used the following SP
IF @object_type = '22' AND @transaction_type IN (N'A',N'U')
BEGIN
IF Exists
(SELECT T0.DocEntry FROM POR1 T0 INNER JOIN OPOR T1 ON T0.DocEntry = T1.DocEntry
WHERE T1.DocType = 'I' AND T1.Series = '142' OR T1.Series = '145' AND T0.[WhsCode] = 'STEX-01'
or T0.[WhsCode] = 'STNEX-01' and T1.[UserSign] ='1'
and T1.docentry = @list_of_cols_val_tab_del)
BEGIN
SELECT @error = 1
SELECT @error_message = 'Not allowed to add PO'
END
END
warm regards,
Guhan

Strange issue with memory module in Sat Pro 4300 series

I have a notebook Toshiba satellite pro 4300 series with 64MB Onboard + 64MB Module and I want to upgrade my memory to 320MB. I bought two ram of 128MB each. I removed the 64MB module and I put in the Slot (A) one of 128MB module but I saw that the total memory is of 128MB again.
I removed the module again and I put the second module into Slot (A) but I saw that the total memory is of 128MB again. After this I put the two modules into my notebook (Slot A and Slot B) but I see that the total memory is of 192MB.This means that it recognizes each module as 64MB and not as 128MB. Dose anybody know why this happens?
And what do I have to do to fix it?
Thanks.
[email protected]

This would be correct if the modules where indeed 64MB. The mother board has 64MB of memory already fitted directly to it so if you leave out the expansion modules the system still see 64MB. By fitted any one of the modules you have will add another 64MB making 128MB and so by fitting the second module will thus give you 192MB which is exactly what you getting.
Therefore you have almost certainly been sold the incorrect modules, 64MB instead of the 128MB modules.

Q: Re: Q: Acquiring data using two E series devices connected by RTSI and streaming data to disk

<< (My first posting)
I use two E series PCI Cards, connected by RTSI. I'd like to stream the data
from both cards to a binary file and to add a header to it.
I also need to somehow read (plot) the stored data, this with another VI.
The whole should be then integrated into an existing program, that used just
one acquisition card.
Till now I have tried to combine "Two E-series Shared ScanClk.vi" and "High
Speed Data Logger.vi" into another VI, and I have tried to read the stored
data with the "High Speed Data Reader.vi". The problem is that I fight with
one error after another, what prevents me from going further.
I use LabView 6.1, under Windows 2K.
Has somebody by chance already done something similar and would agree to
share with me their experience? TIA for any suggestion.
Regards,
Victor Manta
>>
"Ben" wrote in message
news:[email protected]...
> Hi Victor,
>
> I have done a lot of similar work.
>
> Exactly what did you try and what specific errors did you encounter?
>
> What you are trying is do-able provided the hardware you have suuports
> it.
>
> Please post (both here and to the DAQ group)
> the details of the hardware you are using,
> versions of software being used,
> Examples that you are using,
> error codes that occured,
> posibly post example code showing the problem.
>
> Ben
Hi Ben,
I use two PCI-MIO-16E-1 cards, connected by RTSI. I'd like to stream the
data from both cards in real time to a binary file, after having added a
header to it.
For tests, on the channel 0 of each card is applied the same square wave,
100 Hz.
Yes, the hardware support RTSI. I use LabView 6.1.
Till now I have:
1. Combined the "Two E-series Shared ScanClk.vi" and the "High
Speed Data Logger.vi" into a DAQ VI. To do this, I have "doubled" and
adapted the "High Speed Data Logger.vi". For testing purposes the data are
stored in two files, always the same ones (the old ones being overwritten
after each acquisition).
2. "Doubled" and adapted "High Speed Data Reader.vi" into another VI, for
reading from both files, mentioned earlier.
What already works:
- The headers for both files are correctly stored (VI point 1.)
- The acquired data from the first card (device 1) are correctly stored (VI
point 1.)
- The VI (point 2.) that reads both files and displays the results works
What doesn't work:
- The acquired data from the second card aren't stored at all (VI point 1.)
- An error message says: "Error -10608 occurred at AI Buffer Read. Possible
reason: NI-DAQ LV: No transfer is in progress for the specified resource."
I think that I understand this message, but I don't know how to continue.
The DAQ VI can be downloaded from (please click the link, then the link on
that page; about 100K, zipped):
http://www.swissheartnet.unibe.ch/labview.htm
Thanks a lot in advance.
Regards,
Victor Manta
PS. I don't know which DAQ group you mean.

"Filipe A." wrote in message
news:[email protected]...
> Victor;
>
> You can definitely accomplish that task with the DAQ boards you have
> and Labview.
>
> It would be good if you could be more specific as far as what type of
> errors you are seeing and how you are integrating both VIs.
>
> Regards
> Filipe A.
> Applications Engineer
> National Instruments
Maybe Mr. Filipe A. could help me? Please see below, and TIA.
Regards,
Victor Manta
"Victor Manta" wrote in message
news:[email protected]...
> << (My first posting)
> I use two E series PCI Cards, connected by RTSI. I'd like to stream the
data
> from both cards to a binary file and to add a header to it.
>
> I also need to somehow read (plot) the stored data, this with another VI.
>
> The whole should be then integrated into an existing program, that used
just
> one acquisition card.
>
> Till now I have tried to combine "Two E-series Shared ScanClk.vi" and
"High
> Speed Data Logger.vi" into another VI, and I have tried to read the stored
> data with the "High Speed Data Reader.vi". The problem is that I fight
with
> one error after another, what prevents me from going further.
>
> I use LabView 6.1, under Windows 2K.
>
> Has somebody by chance already done something similar and would agree to
> share with me their experience? TIA for any suggestion.
>
> Regards,
> Victor Manta
> >>
>
> "Ben" wrote in message
> news:[email protected]...
> > Hi Victor,
> >
> > I have done a lot of similar work.
> >
> > Exactly what did you try and what specific errors did you encounter?
> >
> > What you are trying is do-able provided the hardware you have suuports
> > it.
> >
> > Please post (both here and to the DAQ group)
> > the details of the hardware you are using,
> > versions of software being used,
> > Examples that you are using,
> > error codes that occured,
> > posibly post example code showing the problem.
> >
> > Ben
>
> Hi Ben,
>
> I use two PCI-MIO-16E-1 cards, connected by RTSI. I'd like to stream the
> data from both cards in real time to a binary file, after having added a
> header to it.
>
> For tests, on the channel 0 of each card is applied the same square wave,
> 100 Hz.
>
> Yes, the hardware support RTSI. I use LabView 6.1.
>
> Till now I have:
>
> 1. Combined the "Two E-series Shared ScanClk.vi" and the "High
> Speed Data Logger.vi" into a DAQ VI. To do this, I have "doubled" and
> adapted the "High Speed Data Logger.vi". For testing purposes the data are
> stored in two files, always the same ones (the old ones being overwritten
> after each acquisition).
>
> 2. "Doubled" and adapted "High Speed Data Reader.vi" into another VI, for
> reading from both files, mentioned earlier.
>
> What already works:
>
> - The headers for both files are correctly stored (VI point 1.)
> - The acquired data from the first card (device 1) are correctly stored
(VI
> point 1.)
> - The VI (point 2.) that reads both files and displays the results works
>
> What doesn't work:
>
> - The acquired data from the second card aren't stored at all (VI point
1.)
> - An error message says: "Error -10608 occurred at AI Buffer Read.
Possible
> reason: NI-DAQ LV: No transfer is in progress for the specified resource."
>
> I think that I understand this message, but I don't know how to continue.
>
> The DAQ VI can be downloaded from (please click the link, then the link on
> that page; about 100K, zipped):
>
> http://www.swissheartnet.unibe.ch/labview.htm
>
> Thanks a lot in advance.
>
> Regards,
>
> Victor Manta
>
> PS. I don't know which DAQ group you mean.

Q: Acquiring data using two E series devices connected by RTSI and streaming data to disk

I use two E series PCI Cards, connected by RTSI. I'd like to stream the data
from both cards to a binary file and to add a header to it.
I also need to somehow read (plot) the stored data, this with another VI.
The whole should be then integrated into an existing program, that used just
one acquisition card.
Till now I have tried to combine "Two E-series Shared ScanClk.vi" and "High
Speed Data Logger.vi" into another VI, and I have tried to read the stored
data with the "High Speed Data Reader.vi". The problem is that I fight with
one error after another, what prevents me from going further.
I use LabView 6.1, under Windows 2K.
Has somebody by chance already done something simi
lar and would agree to
share with me their experience? TIA for any suggestion.
Regards,
Victor Manta

<< (My first posting)
I use two E series PCI Cards, connected by RTSI. I'd like to stream the data
from both cards to a binary file and to add a header to it.
I also need to somehow read (plot) the stored data, this with another VI.
The whole should be then integrated into an existing program, that used just
one acquisition card.
Till now I have tried to combine "Two E-series Shared ScanClk.vi" and "High
Speed Data Logger.vi" into another VI, and I have tried to read the stored
data with the "High Speed Data Reader.vi". The problem is that I fight with
one error after another, what prevents me from going further.
I use LabView 6.1, under Windows 2K.
Has somebody by chance already done something similar and would agree to
share with me their experience? TIA for any suggestion.
Regards,
Victor Manta
>>
"Ben" wrote in message
news:[email protected]...
> Hi Victor,
>
> I have done a lot of similar work.
>
> Exactly what did you try and what specific errors did you encounter?
>
> What you are trying is do-able provided the hardware you have suuports
> it.
>
> Please post (both here and to the DAQ group)
> the details of the hardware you are using,
> versions of software being used,
> Examples that you are using,
> error codes that occured,
> posibly post example code showing the problem.
>
> Ben
Hi Ben,
I use two PCI-MIO-16E-1 cards, connected by RTSI. I'd like to stream the
data from both cards in real time to a binary file, after having added a
header to it.
For tests, on the channel 0 of each card is applied the same square wave,
100 Hz.
Yes, the hardware support RTSI. I use LabView 6.1.
Till now I have:
1. Combined the "Two E-series Shared ScanClk.vi" and the "High
Speed Data Logger.vi" into a DAQ VI. To do this, I have "doubled" and
adapted the "High Speed Data Logger.vi". For testing purposes the data are
stored in two files, always the same ones (the old ones being overwritten
after each acquisition).
2. "Doubled" and adapted "High Speed Data Reader.vi" into another VI, for
reading from both files, mentioned earlier.
What already works:
- The headers for both files are correctly stored (VI point 1.)
- The acquired data from the first card (device 1) are correctly stored (VI
point 1.)
- The VI (point 2.) that reads both files and displays the results works
What doesn't work:
- The acquired data from the second card aren't stored at all (VI point 1.)
- An error message says: "Error -10608 occurred at AI Buffer Read. Possible
reason: NI-DAQ LV: No transfer is in progress for the specified resource."
I think that I understand this message, but I don't know how to continue.
The DAQ VI can be downloaded from (please click the link, then the link on
that page; about 100K, zipped):
http://www.swissheartnet.unibe.ch/labview.htm
Thanks a lot in advance.
Regards,
Victor Manta
PS. I don't know which DAQ group you mean.

Heip in using HP 4300 series 4-in-One injet printer on MacBookPro

Similar Messages

Maybe you are looking for