Heirarchy assignment" feild in Marking Tab of Gener data in Custo Master
need of Heirarchy assignmenttab in customer master
can anyone of SAP GURUS guide me in this area
purpose of this feild and in what sense we can use the feild with 1 real time example
regds
Hi,
The hierarchy assignment field is used especially in customer hierarchy levels to transfer the data to CO and sales information system.While maintaining customer hierarchies for higher level nodes we will maintain the level numbers here. for example your customer having 4 levels for every higher level node we will assign the corresponding level number so that system will pass the data to controlling.
Regards,
Hari Challa.
Similar Messages
-
IBAN,Bank type" feild in Paymnt trancs of Gener data in Custo Master
need of payment transactions tab in customer master
can anyone of SAP GURUS guide me in this area
purpose of this feild and in what sense we can use the feild with 1 real time example
regdsHello,
The purpose of IBAN :Internationl Bank account number .The IBAN's primary purpose is to facilitate cross-border inter-bank routing and avoid routing errors.
it is used to as reference when making payment or trasnfering amount to bank sin different countires
Bank type : Internal descriptions of the banks , it cna be used to clasiify different type of bank accounts
ex, when there are sevarl banks, a particular bank can be used to deposit euro , remitances, transfers , dollar different
hope this helps
Thanks
akasha -
"Corporate Group" feild in contrl data tab of Gener data in Customer Master
can anyone of SAP GURUS guide me in this area
purpose of this feild and in what sense we can use the feild with 1 real time example
regdsHi,
I would like to know where I can create a matchcode for this field as I have read the following:
Group key
If the customer or the vendor belongs to a group, you can enter a group key here. The group key is freely assignable.
If you create a matchcode using this group key, group evaluations are posible
I would also like to know if in the reports of sales orders/quotations it could appear.
Thanks -
"Trading Partner" feild in contrl data tab of Gener data in Customer Master
can anyone of SAP GURUS guide me in this area
purpose of this feild and in what sense we can use the feild with 1 real time example
regdsMostly in Inter Company Process, this field will be used to identify your business partner. You can create multiple business partner in IMG path -- Enterprise Controlling --> Profit Center Accounting --> Preparation for consolidation --> Read Purchase Orders / Sales Orders --> Identify Affiliated Companies
thanks
G. Lakshmipathi -
Annual sales feild in Marketing Tab of General data in Customer Master?
Hi SAP GURUS,
can anyone tell the relevence of use /need of this
how it is update and what basis it will update
thanks in advancehi,
pls go thro the links,
Customer Master Data - Tab Marketing.
thanks. -
"Employees" feild in Marketing Tab of General data in Customer Master?
Hi SAP GURUS,
can anyone tell the relevence of use /need of this
how it is update and what basis it will updatehi,
pls go thro the links, this may help you
Customer Master Data - Tab Marketing
thanks. -
Assignment Feild in Service entry sheet - ML81N
Dear All,
We need to add assignment Feild (ZUONR) in Service entry sheet (ML81N).
Can any one suggest the posssible solution.
Thanks & RegardsHi JKTECH TEAM ,
As a standard process , system is not going to given Assignment field as input field for ML81N. you can use reference or Document header text.
If you required you can use reference or Document header text or you can use user fields.
If you still required you need to maintain customisation through Exits :
INTERFAC Interface for data transfer
SRVDET User screen on tab strip of service detail screen
SRVEDIT Service list control (maintenance/display)
SRVENTRY Unplanned part of entry sheet (obsolete since Rel. 3.1G)
SRVESI Data conversion entry sheet interface
SRVESKN Set account assignment in service line
SRVESLL Service line checks
SRVESSR Set entry sheet header data
SRVEUSCR User screen on entry sheet tabstrip
SRVKNTTP Setting the account assgnmt category when reading in, if "U"
SRVLIMIT Limit check
SRVMAIL1 Processing of mail before generation of sheet
SRVMSTLV Conversion of data during importing of standard service cat.
SRVPOWEB Purchase order for service entry in Web
SRVQUOT Service export/import for inquiry/quotations
SRVREL Changes to comm. structure for release of entry sheet
SRVSEL Service selection from non-SAP systems
Please choose your choose.Because Assignment field is given for Sorting purpose of any documents -
Adding new feild in VA01- TAB= Procurement
Hi
I got a requirement to add a new feild in the TAB=>Procurement for T-code VA01/02=> sales order.
Please give the required inputs on doing this change .
Regards
SriHi,
Check these notes:
SAP Note 209278 - Display of customer-specific fields in sales doc
SAP Note 302497 - Additional cust. fields not displayed in 'Additional data B'
SAP Note 386694 - Additional data not displayed in screen 8459 and 8309
SAP Note 420546 - Additional data B and transaction variants in sales order
and related notes.
I hope this helps you
Regards
Eduardo -
Assignment feild is not pulling through to report FS10N
Hi,
When I run the FS10N and FBL3N, The assignment feild is not pulling through to report FS10N and FBL3N even though we select the assignment feild to be displayed(layout).If we double click on the line item the assignment feild value is appearing.
We selected sort key as 040:Reference in GL master...
Could you please anybody help me by giving solution for this and what could be the problem..
Thanks & Regards,
PrakashHi
Thank you so much...
I found the problem where it's going wrong..The problem is in GL master sortkey has been selected as 040(Reference), but user has not filled reference field, has filled assignment field.That is the reason system is not showing the value in assignment field, it has picked from the reference field.
So now if we fill the reference field system will display the assignment value in FS10N..
Now I want to get the existing assignment field values in FS10N,which have not been given in reference field.
Is there any program to retrieve existing assignment values under assignment field in FS10N report?
Could you please tell me..if any program is there...
Thanks & Regards,
Prakash -
Can i rename heading Date1 feild in va01 transcation under fast data tab.
Can i rename heading Date1 feild in va01 transcation under fast data tab to confirmed date
Hi,
try with the following exit :
V45A0002 of EXIT_SAPMV45A_002
Regards,
Renjith Michael. -
Before I go sending a report to apple, I wanted to check here first, and see if I've overlooked something.
1. I've set up a screenset, that has the marker tab open. I also have the view text button enabled (so that my first marker can be notes about the project). Id like to hit the screenset, click the marker, and see the text, but the screenset is not remembering to keep the view text button enabled. It defaults back to just the marker list.
2. This is a 2 part question.
a. Logic is not remembering my track automation sub track set ups, when I turn on and off view automation. (lets say I want 2 sub tracks, with cut off and resonance. I set it up, but when I disable automation, and turn it back on, the sub tracks are not there, and I have to hit the subtrack triangles again.
b. related. to try and get around this problem, I made 2 screen sets. one that has the arrange with no track automation (and no subtrack), and one that has the arrange with track automation (and all the sub channels displayed). however, when you go back to the 1st screenset, it now displays the sub channels (without automation... just blank tracks, all named the same). if you turn on automation, and turn it off again, the subtracks disappear, but once you go back to the screenset with the automation, all of the subtracks are gone and it defaults back to volume.
Does anyone have any insights about this? Thanks!
Message was edited by: Matthew UsnickUnfortunately, you are right Matthew. Locking a screenset does not seem to preserve most settings anymore. If you use folders you will already have noticed that locking a screenset with the folder open doesn't mean that when you go back to that screenset the folder will be open. In fact, in most cases it will be closed. This is REALLY a problem!
I haven't been using automation with Logic 8 much yet, but I have noticed that when you switch automation off on the fader, Logic will turn it back on, sometimes the very next time you start the song. -
Acct assignment cat. of item not in user data; Inform system admin
Hi all,
We are on a SRM EBP 5.0 project and we are getting the following error when we try to create a purchase order from the purchasers login.
"Acct assignment cat. of item not in user data; Inform system admin"
The complete details of the screen shot are as follows:
The following error text was processed in the system DS1 : Acct assignment cat. of item not in user data; Inform system admin.
The error occurred on the application server lndnysap1_DS1_01 and in the work process 0 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Form: ABORT_PO of program SAPLBBP_PO_UI_ITS
Form: ADD_TO_MSG_LOG of program SAPLBBP_PO_UI_ITS
Form: ADD_TO_MSG_LOG_MULTI of program SAPLBBP_PO_UI_ITS
Form: SET_PRICING of program SAPLBBP_PO_UI_ITS
Form: DETERMINE_EXTERNAL_SCREEN of program SAPLBBP_PO_UI_ITS
Module: DETERMINE_EXTERNAL_SCREEN of program SAPLBBP_PO_UI_ITS
We did the following steps :
Created shopping cart- employer and WF triggered apprd. by manager.
Purchaser did "Carry Out Sourcing ", and if we say "Create Purchase Order", the PO gets created with a information message that "Incomplete purchase order 11/1 is created "
When we go to "Process Purchase Order" for the completion of the same. If we see Follow-on documents "Purchase Order Held" occurs.
In the tab Item Data details Pricing tab we get this error.
Do any of the SRM gurus can suggest us what to do?
In our admin logon it shows
"Server for pricing is not running. Start Server" occurs after every run of this process purchase order from the purchasers login, though our IPC is working fine.
Will be of great help if somebody replies soon.
Sincerely,
Sridhar.Hi,
IPC has to be configured.
Please check the following threads :
https://forums.sdn.sap.com/click.jspa?searchID=211089&messageID=2714527
https://forums.sdn.sap.com/click.jspa?searchID=211089&messageID=2715019
Kind regards,
Yann -
Tables listed in Result set field selction tab against Standard Data Objects in MDO configuration
On what basis are the tables gettting filled in the Result set field selction tab against Standard Data Objects in MDO configuration.
Only the handler class is specified before it gets filled.
Vivek.
Tags edited by: Michael ApplebyHi Vivek,
I would also recommend providing the version of the product either in the body of your discussion or in the tags (or both, preferred). If you are installing it on SMP 2.3 or some other platform, please add that as well. I have updated your tags and assigned the correct Category. Since there are so many different technologies in SAP for Mobile, tags and Categories help the helpers find your post and help you find a solution.
Thanks, Mike -
What does Field Label tab does in Data element properties
Hi,
Please explain What does Field Label tab does in Data element properties. It has following interface:
Length Field Label
Short
Medium
Long
Heading
Thanks!
~Sid
Max Points for precise answersHi
<b>Short Field Label</b>
Definition
One of the following:
- Short field label
- Medium field label
- Long field label
Can be assigned as prefixed text to a screen field referring to the ABAP Dictonary. The text is displayed on the screen in the logon language of the user (if the text was translated into this language).
A heading can be defined to output the field values in lists. This heading is automatically included in the list header row, in the logon language.
<b>Medium Field Label</b>
Definition
One of the following:
- Short field label
- Medium field label
- Long field label
Can be assigned as prefixed text to a screen field referring to the ABAP Dictonary. The text is displayed on the screen in the logon language of the user (if the text was translated into this language).
A heading can be defined to output the field values in lists. This heading is automatically included in the list header row, in the logon language.
<b>Long Field Label</b>
Definition
One of the following:
- Short field label
- Medium field label
- Long field label
Can be assigned as prefixed text to a screen field referring to the ABAP Dictonary. The text is displayed on the screen in the logon language of the user (if the text was translated into this language).
A heading can be defined to output the field values in lists. This heading is automatically included in the list header row, in the logon language.
<b>Heading</b>
Definition
One of the following:
- Short field label
- Medium field label
- Long field label
Can be assigned as prefixed text to a screen field referring to the ABAP Dictonary. The text is displayed on the screen in the logon language of the user (if the text was translated into this language).
A heading can be defined to output the field values in lists. This heading is automatically included in the list header row, in the logon language.
<b>Reward If Usefull</b> -
Is there any heirarchy for retreiving theorg unit or sales office data for
Hello,
If there is only one crm user which is assigned to different sales offices,then while monitering any activity from which sales office or org unit does the data is displayed.
Is there any heirarchy for retreiving theorg unit or sales office data for an employee?
regards,
divyaIF NOT it_vbrk[] IS INITIAL.
Fetching Material no, sub-family, tint and coating codes
SELECT vbeln posnr fkimg vrkme prsdt netwr matnr arktx mwsbp subfam
codcol codcoat epaiscom codtyp length width
INTO CORRESPONDING FIELDS OF TABLE it_vbrp
FROM vbrp
FOR ALL ENTRIES IN it_vbrk
WHERE vbeln = it_vbrk-vbeln AND
subfam IN s_subfam AND
codcol IN s_codcol AND
codcoat IN s_coat AND
epaiscom IN s_thick.
endif.
Maybe you are looking for
-
ORA - 01034 : ORACLE NOT AVAILABLE Error while creating new instance.
I was trying to create new instance in unix environment. I have configured all my shell scripts to run and install but while performing the install I get the following error message and fails. ORA-01034: ORACLE not available I have previously install
-
Restoring Paid Apps that Weren't Back Up on iTunes
Hello, I need to know how to restore some paid apps back to my iPad that aren't backed up via iTunes on my computer. I purchased and downloaded the apps directly on my iPad and there was a syncing issue and for some reason it completely wiped my apps
-
I am just starting to set up my icloud on a 15" Macbook Pro w/ Retina, and I noticed that none of my e-mails are backing up to the icloud. I use: cox.net, and the only thing it backs up is: @icloud.com. How can I get it to back up the cox account? Th
-
Equipment: iMac 21" 3.06Ghz Core 2 Duo ADVC 110 analog to digital video converter Toshiba VCR I've been converting VHS tapes to digital format via iMovie 9 and have been mostly successful so far. One tape is being very strange though. When I start th
-
Warnings when loading dimension members - no members loaded
Hello, I did the mapping and the interface for loading members for a planning dimension (from csv file), run the 'execute' and have two warnings (on step1 and step7), however no members are loaded - warning for step7: org.apache.bsf.BSFException: exc