Heirarchy Changes not displayed in query

Hi,
We are using 0ACCOUNT's heirarchy in a query.We changed the node of a particular range of account numbers from A to B.After changing the heirachy,saved and activated it.
The problem is when we execute the query,it stil shows that particular range of numbers under the old node A instead of showing it under new node B.
Any pointers on this would be of great help
Thanks in Advance,
Bhagyarekha.

Hi,
GO to t-code RSH1 and check first if hiearachy is active.
Then run the hiearachy attribute change run.
One helpful url is as follows:-
http://help.sap.com/saphelp_nw04/Helpdata/EN/80/1a67ece07211d2acb80000e829fbfe/content.htm
Regards
Rahul Bindroo

Similar Messages

Infoobject in infoset but not displaying in query designer

Hi,
I have created a query on infoset(ods1 & ods2).
a custum defined infoobject (fiscyr) is not displaying in query designer while it is present in infoset.
pls give your inputs,for why this infoobject is not available in query designer.
Thanks
Radika

Hi Radika,
I cannot think of anything other than the solutions already mentioned in this thread (checking the IOBJ in infoset, running RSISET and activating it). I just had a foolish idea that you might not be looking for the right IOBJ. All the IOBJs from an infoset are not displayed with their original technical names in the query designer. They are disdplayed in the format: <infoset_technical_name>_FXXXXX where XXXXX is a number.
Also try one more thing. Go to transaction RSISET and type in the technical name of the infoset there.
Right below the box where you type the Infoset name is a check button. Check your Infoset there and then activate it from within the RSISET transaction (the activate button is right after the check button). With Infosets, sometimes just activating it from within RSA1 does not work but RSISET always seems to work.
Do this and see if it helps.
Thanks & regards,
Nikhil

Customer number is not displayed at Query

Hi to all,
I have created a query where i need to display the Receivables aging Report.
when i check data at Cube level data is coming properly for Every Customer.
but when i filter customer at Query level data is not displayed at query level.
Please can any one provide me solution.
i shall be thnakful to you for this.
Regards
Pavneet Rana

Thanks for Reply,
For some customer i am getting correct data, and for some customer i am not getting any data at Query level,
although correct data exist for every customer at CUBE level.
Regards
Pavneet Rana

Time dependent Hirerachy data not display at query level

Hi all,
I have loaded a time dependent hirerachy from flatfile,it showing same data as in flat file at RSMO,where as if I am executing query ,report displaying in hirerachy structure format,but DATE-TO and DATE-FROM are not displaying .
Ex:On ZEMPLYOE i have created ZMANAGER as hirerachy,report giving ZMANAGER&ZEMPLOYEE details correctly in hirerachical format,but Date-to and Date-from are not displaying at report level,where as entair data is loaded to ZEMPLOYE without any error.
If any one has come across the same situation,what are additional steps need to have take.
your help will be appreciated
Regards,
Praveena.

Yes, date-from and date-to are not meant to be displayed in the report.
Let me take an example to tell the purpose.
Suppose your hierarchy displays employees managerwise.
If you create hierarchy telling
from 01-01-2009 to 31-03-2009, employee E1 will report to Manager M1
from 01-04-2009 to 31-05-2009 , E1 will report to M2.
then, until March, E1 will be displayed under M1 node in the report, and in April and May, he will be displayed under M2 node.
So, we create hierarchy only once, but they change in the report depending on the month.
Hope this helps.

Changes not displaying properly in the Develop Module

When I make a change in the Develop Module, the changes are not displayed correctly in the main window, and the navigator window turns grey. When I return to the Library Module, the changed image is correctly displayed. Then when I return to the Develop Module, the changes are correctly displayed. I followed the troubleshooting steps and at one point Adobe says the user permissions might not be right. I created a new user, and in the new user profile, LR works as it should. I am using Windows 7. What do I need to change in the old user's 'permissions' to match the new user's 'permissions'? I would prefer to delete the new user, rather than re-create my computing environment all over again.

If you see grey windows in Develop it is almost typically a bad monitor profile in Windows. Unfortunately quite common. You should recalibrate the monitor. If you don't own a calibrator, try going into your monitor's properties pane. Go to the Color management tab and delete any profile associated with the monitor.

Changing the display of query results on web

Hi,
Whenever I execute a query in IE, the standard report that comes up displays only 4 columns. Where can I change this number of columns that will be displayed?
I checked in RSCUSTV27 for the web template for Ad Hoc reporting, where there was no template specified. In case there is no template specified, it is going to use a standard 0QUERY_TEMPLATE web template for this. I could not find this standard web template in both active content and BI content.
Thanks,
Sanjeev

Hi,
The standard web template is 0ANALYSIS_PATTERN, please open that in WAD and do the needful.
Thanks
Dipika

Some font changes not displaying in PDF output

Hello,
I have Developer 2000 R 2.1 on my workstation and I produced a report from an Oracle table in PDF format. It displays different font weights, styles and colors (black or red) depending on values in a particular column. We have Oracle 8.0.5.2.1 and Reports30.
The PDF report is perfect when it is displayed through the 'Live Previewer' or displayed using 'PDF' under 'Web Preview'. After I send my 'REPORT.rtf' to the server and compile using 'conv.sh', I get a 'REPORT.rep'. When I try to display the PDF report from a web page, using 'REPORT.rep', the some font changes are missing. No italics, no bold in some instances. It does show 'red', but not in all the correct places.
What am I doing wrong?
Thank you very much for any assistance.
Paul

Hi,
the PO Output for Communication does not use the $OA_MEDIA variable so you have to provide the full path to your images, example url:{translate(concat('/d01/oracle/prodcomn/java/oracle/apps/media/',BILL_TO_LOGO),' ','')}
Hope this helps as it works for us.
Regards,
Imtiyaz

VALUE CREATED, but not DISPLAYED IN QUERY

Hi dear all,
I have created a value under InfoObject A by going to RSA1.
Now while creating a Query, i have to use this value.
But this created value is not seen under that Navigational attribute,
B__A
What shud i do???
Need Help..
Thanks,
Sowrabh

When you right click on the Charachteristic and say restrict. You are not able to find the new value. Is this your issue??? try the folloiwng.
In 3.5
Right Click on the Characteristic and say restrict and go to fixed values.
At the Bottom you can see a Display Other Valu Option(Yellow-green Colour Arrow)
Click on that. this opens a new window.
In this Window uncheck the Only Values From infoprovider
Also uncheck the Authorized Values Only Checkbox
Also Set the Number of Displayed Values to All
Now Click OK. This will show you all the values for that particular Characteristic.
In 7.0
When u restrict a Charachteristic, u will see an option called Setting which is on top
When u click on that it will open a new Window . In that window, select value restrictions.
in that select the Radio Button All values And Read Mode Setting as Values in Master data.
Thsi will give you all the values

Attribute data is not displaying in Query

Hi BW Experts,
i enahnced some of the fileds to 0employee iam able to see the data in RSA3 and infoobject master data.bu when i executed the query these enhanced fileds data is not diplaying may i know what is the reason ,i executed attribut change run also . can any one suggest on this issue.
Regard
sivaraju

Hello Sivaraju ,
Are u using navigational attribute of the enhanced char of 0employee in the query ?
if yes , then after loading the master data of 0employee have you run atttribute change run from rsa1..>menu bar tools...attribute change run .
check master data of 0employee and see whether R3 data is matching with BI for the enhanced char or not ?
also check in infocube whether u can see the enhanced char of 0employee correctly ?
My suggestion is to use only navigational attribute of enhanced char or you can add the char to infocube and then in update rule master data look up option . In later case you need to reload the data of infocube.
This can be avoided by using navigational attribute.
Check the cube data for the employee along with the enhanced char .
create a new query along with 0Employee and enhanced char and one key figure and run it for testing purpose and see the result.
regards ,
Amol

Counterparty info not displayed in query

we use logical db BPF, below is the screen, actually we have more than 50 BP in the system, why it says : no list displayed, the design (other data fields is kept as default) and input screen is shown in the same picture

Hi,
GO to t-code RSH1 and check first if hiearachy is active.
Then run the hiearachy attribute change run.
One helpful url is as follows:-
http://help.sap.com/saphelp_nw04/Helpdata/EN/80/1a67ece07211d2acb80000e829fbfe/content.htm
Regards
Rahul Bindroo

Key Figure Attribute not displaying in Query Designer

Hello Experts,
I have an InfoObject which has Key Figures as attributes. When creating a query I <b>once</b> was able to see these Key Figure attributes in the Query Designer. Howerver, recently I am not able to see them anymore in our DEV environment.
In our QA and PROD environment I am to see these Key Figures attribues in Query Designer. Is there a setting that I am overlooking? We are currently on BW 3.5 with SP 19.
Please help!
Thanks in advance,
BQ

Hi Jaya,
Thanks for the quick response. But how to I check the authorization for 1KYFNM and what am I looking for?
Thanks,
BQ

Key figure attribute not displaying in query

Hello experts.
I have a key figure attribute called Credit Limit. It is an attribute of Customer. The key figure is type CURR with 2 decimal places.
When I maintain master data for Customer, I can see the value fine e.g. 2,000.00
When I run a BEx Query the very same value displays as 0,00.
Does anyone have any idea why this could be?
For info we run BW 3.5.
Thank you.

Hi,
1.please ensure that your master data is activated (right click the IObj, Activate Master Data)
2. how do you display this attribute? as attribute of the customer? as Nav? as a formula variable ?
let us know
Olivier.

Template changes not displaying in preview/browser

I am using Adobe Dreamweaver CS3 on a Mac OSX. A couple of weeks ago I made changes to a template page. The changes show up on the template page and on the site pages when I view them in dreamweaver. However, when I view them in a browser, whether locally or remotely, the changes do not show. I have tried recreating the site cache but to no avail. Has anyone got any ideas?

Have you cleared your browser cache?

Master Data(texts) not displayed in Query/Analyser

Hi ALL,
I hv master Data's like Cost center,Cost element,vendor,Customer, for which the data is displayed only as key and no text is displayed,even though i hv selected key and text option,,also i hv checked their corresponding master datas,,i c that all the data has been loaded respectively.
Please advice on how to solve this...asap
Thanks

Goto RSA1 and double click on the infoobject.
Goto the Business Explorer Tab and make the Display Option as Key and Text.

V$session_longops not displaying a long running query

Hi,
There is a certain query that runs as a part of a stored procedure which when run takes about 1 and half hours to get completed and there is a hint in this query to use certain indexes on few tables.
This time was unacceptable as it was much much longer than what it should have taken so I tried to monitor it through v$session_longops using the following query
select * from v$session_longops where time_remaining > 0
It shows no rows selected but the query is still running.
When I changed the hint in the query to use the full table scan on these tables instead of the indexes it began to show up on the v$session_longops and it took like only 15 mins for the procedure execution to get completed.
My questions are two fold
1) Why did the first time with the Hint on the indexes not show up on v$session_longops with time_remaining > 0 and why did it show up only when i did a full table scan?
2) Secondly is'nt a scan on a table faster using indexes if the index has unique values on the columns we are trying to get data from than the Full Table Scans. And if so then why is it behaving differently in this case.
Thanks a lot in advance for any answers/suggestions

1. v$session_longops only reports long running operations. The CBO assumes that the index scan is a tiny operation (nested loop joins), hence it is not displaying the query, but when you have a full table scan, the CBO assumes this to be a long operation, and hence it is visible in v$session_longops.
2. Allow me to quote from
"http://asktom.oracle.com/pls/ask/f?p=4950:8:17968334624783495563::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:9422487749968"
"full scans are not evil, indexes are not good"
"full scans are not evil, indexes are not good"
"full scans are not evil, indexes are not good"
Click that link for more information. :)
The gist of it is, your CBO is smart, and hence generating a better plan than when you force it to use indexes. Yes, the plan has full table scans, but that is not a crime. What you can do is use optimizer parameters - "optimizer_index_cost_adj" to tune for a better performance, but you should not force an index unless you are sure that the index gives you a lower cost.
You could paste the plan for you queries with and without hints and also paste the optimizer hints - show parameter optimizer.

Heirarchy Changes not displayed in query

Similar Messages

Maybe you are looking for