Heirarchy - interlap error

duplicate post:
Lm ISSUE
please do not raise the same post under different subjects
For example:in
sm37 screen :
Job                                                        job created by
BI_BTCH_XUD_NAFTA_PRD_CST_HDR       KOLAGAI
BI_BTCH_XUD_GLOB_PURCH_TRANS        KANDUKG
BI_BTCH_FUE_GLOB_ACCTG_DOC_AP       LANEJ1
means this job ruuning under this id :
So if want to run all thease jobs with my id
what should i do?
Thanks in advance
Praveenkumar yagnamurthy
Edited by: Arun Varadarajan on Dec 20, 2008 2:52 PM

hi,
Check the job log,
i think it is infopackage schedule,
delete the job for present ID .
and schedule by logging through required id.

Similar Messages

Deployment error when modifying measures and my heirarchy

I am working on Lesson 3 on analysis services tutorial where i am modifying measures and my heirarchy
and this is my error message.
Warning 1 Dimension [Date] : Avoid visible attribute hierarchies for attributes used as levels in user-defined hierarchies. 0 0
Warning 2 Dimension [Customer] : Avoid visible attribute hierarchies for attributes used as levels in user-defined hierarchies. 0 0
Warning 3 Dimension [Product] : Avoid visible attribute hierarchies for attributes used as levels in user-defined hierarchies. 0 0
Warning 4 Dimension [Product] : Define attribute relationships as 'Rigid' where appropriate. 0 0
Warning 5 Errors in the OLAP storage engine: A duplicate attribute key has been found when processing: Table: 'dbo_DimDate', Column: 'CalendarQuarter', Value: '4'. The attribute is 'Calendar Quarter'. 0 0
Error 6 Internal error: The operation terminated unsuccessfully. 0 0
Error 7 Server: The current operation was cancelled because another operation in the transaction failed. 0 0
What can i do to fix this?

Hi Cook959,
In your scenario, it seems that the issue was related to the error message.
Errors in the OLAP storage engine: A duplicate attribute key has been found when processing: Table: 'dbo_DimDate', Column: 'CalendarQuarter', Value: '4'. The attribute is 'Calendar Quarter'. 0 0
There are many reasons that can cause this issue, here are some blogs which list the reasons and explanation, please refer to the links below to see the details.
http://ms-olap.blogspot.com/2009/11/duplicate-attribute-key-has-been-found.html
http://blog.oraylis.de/2013/08/a-duplicate-attribute-key-has-been-found-during-processing-revisited/
Hope this helps.
Regards,
Charlie Liao
TechNet Community Support

Error - Node Z000888000 already exists in the heirarchy

Hi All,
We are getting this production error in loading heirarchy from the R/3 system. The infopackage is configured for 'ALE inbox and infoobject' . How can I see the data in ALE inbox ,so that I can manually remove this node and load again .
Regards,
Dola
Edited by: Dola das on Nov 19, 2009 7:26 AM

Hi,
check the below tcodes once
Transaction code BDRC
Transaction code BDRL
For more info go through the below links
http://help.sap.com/saphelp_nw04/helpdata/EN/b6/7fe03c19758e71e10000000a114084/frameset.htm
or
https://cw.sdn.sap.com/cw/docs/DOC-29794
Regards,
Marasa.

Error when duplicating heirarchy of VI that uses NI_LVConfig.lvlib

I am using labview 2010 SP1 and keep getting an invalid input error when trying to Save As-Duplicate Hierarchy any VI that contains any part of the NI_LVConfig.lvlib. I have tried and found this problem using windows 7 and 8 and it seems to be independant of the save as location (C drive, network drive, desktop, etc.)
Is there a known update or root cause for this?
Attachments:
Local_SealDMConfig_.ini ‏1 KB
iniLib test.vi ‏11 KB

I've done some more investigation on different computers, and have found that the error pops up only when i try to save As-duplicate heirarchy from a VI containing the NI_LVConfig.lvlib that resides on my office network server location to somewhere else. If i copy the VI that i posted here to my harddrive then Save As-DupHeir it works. I don't have another network to try to narrow it down much further as to what about my network or network path might be leading to the problem. Here is a jpg of the error i get.

Error while accessing Heirarchy node in report

Hi Experts,
I am getting an error message while accessing a node in hierarchy while using variables for reports. I used Tcode RSZV but its throwing error that it doesnot exist in BW 3.x and it is embedded in Bex. Can any one guide me for any other options available to get the same functionality in Bex?
Thanks ,
Pilli.

Hi Pilligay,
First check the version you are using.
T code RSZV is used in the earlier version of 3.0B only.
From 3.0B onwards it is possible in the query designer (BEx) itself. You need to right click on the info object for which you want to use as a variable and proceed further in selecting variable type and processing type.
Cheers,
Tanish

Error while loading heirarchy for a standard infoobject

HI,
When I try to run a infopackage for loading a hierarchy for a standard info object 0RPM_BUGU, I'm getting an error that states that there are no PSA tables for the selection criteria.
Both the communication and the transfer structure are active.
Kindly help me resolve the issue.
Thanks and Regards,
Sahana Narahalli

Sahana,
Usually Hierarchy datasources are iDOC datasources - try changing the same in your transfer rules and check
Arun

Error while Displaying Heirarchy in Bex Report

Hi All,
plz Solve my problem,
In the report Heirarchy displaying like notAssignedmaterial with one level, but my Heirarchy contain 8 levels.
Plz Guide me
Thanks in Advance
Anil

Hi Anil,
Please run the Heirarchy attribute change run. It may give u the desired solution.
Administrator workbench-menubar Tools- apply hierarchy attribute change run.
after doing this run the query and check if the values are coming.
Hope it would help u
Mohan

Error in heirarchy data load

Hi
While loading Hierarchy data getting error The node for id 5478952 contains Invalid characters.
Please update its urgent
Thanks
sunil
Edited by: sunil chowdary on Aug 21, 2008 1:16 PM

Hi,
Please identify the invalid characters and add them in the system via transaction: RSKC.
You can also, try to check those values in the source system (e.g. R/3).
Hope it helps.
AT

Heirarchy errors

Hi,
I am getting these warning in production server but same option is working fine testing and development
Kindly anyone can help its an urgent matter
Hierarchy ABAC in version was not found for key date 20080315.
Chart "CHART_1": DataProvider contains too much data
Hierarchical context menu has specified an invalid hierarchy
Hierarchical context menu has specified an invalid hierarchy .
These are above inforamtio messgases please kindly help me...#
Thanks

Hi..
1) How you created the hierarchy in production ? via datamarts ?? If yes, then kindly check if the hierarchy is in active version in the production system. Also, check the key date in the header of the hierarchy if the "valid from" and "valid to"date is waht you need ?... another option ...go to transaction rsh1 and put your infoobject in the screen and then filter on the hierarhcy which you need to see below that infoobject...check valid from and valid to dates and version of that hierarchy...if the version is not active , make the hierarchy active again manually and this could solve the problem.
With your description, I am able to sugguest only this much, let see if this solves your problem ?
Thanks and regards
Vishal

Error while executing a query

Hi,
While executing a query in portal it is giving internal server error.
In the input screen help, we are searchign using wild card characters.I.e " 141",its giving internal server error,
If we are giving the one value/no value the report is executing correctly.
The input variable is a heirarchy variable. We tried to give it in the heirarchy format also. Still its not working.
Could anybody help on this.
Thanks

u might be using "select * from <table name>", instead try this
"select slno as slnod,title as titled.."
http://www.javagalaxy.com

Sharepoint 2013: Problem / Error when creating Variation Hierarchy for French and German Languages from Variation root EN

Hi,
I have a website with English and Arabic Language Packs installed. I have the corresponding Variation heirachies created and the whole site collection is published.
Recently the client asked for french and german languages to be accomodated as well. So I followed the same approach I did for English and arabic (installed the language packs) for foundation, ran ocnfiguration wizard, installed server language pack &
ran configuration wizard.
But after creating the variation label, when i try to create the variation heirarchy, I am getting the following error.
"Unknown failure when creating a variation of page http://server:port/en/pages/default.aspx in label /fr/Pages/default.aspx.
The Variations Create Hierarchies job failed with the following error message& Unknown failure when creating a variation of site
http://server:port/en in label fr."
Am not sure what is going wrong. Appreciate a feedback.
Thanks,
SSP
SSP

Hi,
According to your description, my understanding is that the error occurred when you created the Variation Hierarchy for French and German Languages from Variation root EN.
I recommend to check the Resources folder located at C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15 to see if the file core.fr-FR.resx exists in the folder.
Here is a similar thread for you to take a look:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/611575b2-d129-44c6-814b-2e5782178850/unknow-failure-when-creating-variations-in-sharepoint-2013-is-this-a-bug-in-sharepoint-2013-rtm?forum=sharepointadmin
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Error -17600 when switching from LabVIEW Development System to LabVIEW Run-Time Engine in Adapter Configuration

I receive an error message (code -17600) while loading my test sequence after switching from LabVIEW Development System (2009 f3) to LabVIEW Run-TIme Engine using the Adapter Configuration.
ErrorCode: -17600,
Failed to load a required step's associated module.
LabVIEW Run-Time Engine version 9.0.1f3.
When I switch back to the LV development system, everything is OK, and the sequence loads and runs perfectly.
My TestStand Engine Version is 2012 f1 (5.0.0.262).
I'd appreciate any help on this issue.
Roman

Hi Roman,
There are a couple of things you can try:
1) Determine if the LabVIEW RunTime Engine is corrupted in some way. Create a new simple VI with no sub-VIs, using the same LabVIEW Development system you used for mass-compiling the VIs. Create a TestStand step that calls this VI and ensure it runs correctly. Now switch your LabVIEW adapter to use the RuntimeEngine and choose the "Auto detect using VI version" option.
Check if the simple VI is loadable and runs without errors in TestStand.
If the step generates the same error, you should try a re-install of the LabVIEW development system.
If not, its most likely that there is some VI you are using that is not loadable in the LabVIEW Runtime Engine because:
1) Some sub-VI is still not saved in the right version or bitness. Open the VI heirarchy of the top-level VI that you are calling from TestStand and examine the paths of all the sub-VIs to check if they were in the folder you masscompiled and re-save any that are outside this directory.
Also, when you try to close the top level VI, do you get a prompt to save any unsaved files? If so, they could be the sub-VIs that are not saved in the right version. Save all of them.
Check if you are loading any VIs programatically and if these are compiled and saved in the right version as well.
2) There is some feature you are using in your LabVIEW code that is not supported in the LabVIEW RunTime Engine. To check this, add your top-level VI to a LabVIEW project and create a new build specification and create a new executable from this VI.
    Right-click "Build Specifications" and choose "New->Application(EXE)".
    In the Application Properties window, select Source Files and choose the top level VI as the start-up VI.
    Save the properties.
    Right-click on the newly created build specification and choose Build.
Run this executable (it will be run using the LabVIEW RunTime) and check if the VI has a broken arrow indicating that it cannot be loaded and run in the LabVIEW Runtime Engine.
You might need to examine your code and find the feature which is not supported in the LabVIEW RunTime and find an alternative.
Another thing i forgot to mention the last time around is if you are using 64-bit LabVIEW with 32-bit TestStand, then executing code using LabVIEW RTE from TestStand will not work since the 64-bit LabVIEW RTE dll cannot be loaded by the 32-bit TestStand process.
If none of the above steps resolve the issue, consider sharing your LabVIEW code so i can take a look.
Regards,
TRJ

Short Dump while Activating a Heirarchy

Hi Experts,
I have a hierarchy which is in M version, I am trying to copy hierarchy from Quality to Dev system.
The hierarchy in DEV system is in M version. When I try to activate the Hierarchy I am getting a short dump which I am not able to understand.
I have tried also with the ABAP programe to activate it but still I am getting this.
Sorry to paste all the dump but can any one advise what could be reasons behind heirarchy not getting activated.
Thanks,
Tati.
Please find the Dump message.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_RSSH_MESSAGE_HANDLER=======CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    Only message types A, E, I, W, S, and X are allowed.
Information on where terminated
    Termination occurred in the ABAP program "CL_RSSH_MESSAGE_HANDLER=======CP" -
     in "CALL_MESSAGE".
    The main program was "RSSH_HIERM_START_NEU ".
    In the source code you have the termination point in line 11
    of the (Include) program "CL_RSSH_MESSAGE_HANDLER=======CM003".
Source Code Extract
Line SourceCde
    1 METHOD call_message .
    2
    3   FIELD-SYMBOLS: <l_s_msg> TYPE gt_s_msg.
    4
    5   READ TABLE p_t_msg INDEX 1 ASSIGNING <l_s_msg>.
    6   IF sy-subrc <> 0.
    7     MESSAGE x000.
    8   ENDIF.
    9
   10   <l_s_msg>-handled = rs_c_true.
>>>>>   MESSAGE ID <l_s_msg>-msgid TYPE <l_s_msg>-msgty NUMBER <l_s_msg>-msgno
   12     WITH <l_s_msg>-msgv1 <l_s_msg>-msgv2 <l_s_msg>-msgv3 <l_s_msg>-msgv4.
   13
   14
   15 ENDMETHOD.                    "CALL_MESSAGE

Hi Prasad,
Have you changed the 'Object Status' from INA to ACT when using the program RSDG_TRFN_ACTIVATE?
You can also refer to the note SAP Note 1030987 - Activation of transformations dumps
regards,
Ashvin

Error while running ejbc..

Hi Friends
I got the following error while trying to deploy my stateful session bean into sun ONE application server.
Deployment Error -- Error while running ejbc -- Fatal Error from EJB Compiler -- -- Failed to load deployment descriptor for: StatefulHello cause: java.io.IOException: Incorrect manifest format
I maintained the folder heirarchy same as in sun example of stateful session bean, CartBean.
Any help can greatly help me. Thank you.
Regards,
Nagaraju.

Hi Friends
I got the following error while trying to deploy my stateful session bean into sun ONE application server.
Deployment Error -- Error while running ejbc -- Fatal Error from EJB Compiler -- -- Failed to load deployment descriptor for: StatefulHello cause: java.io.IOException: Incorrect manifest format
I maintained the folder heirarchy same as in sun example of stateful session bean, CartBean.
Any help can greatly help me. Thank you.
Regards,
Nagaraju.

Error while loading hierarchies

Dear all
I am faicng the following errors while loading hierarchies from R/3
1.Error"Error in the hierarchial structure"
When i open the logs i can see the follwing analysis,but not able to understand
Analysis
The node with the technical name 0000104 appears more than once under the node with the ID 10400011. A node must be hung only once under its direct predecessor (parent). The nodes with the same technical name have the IDs 10400017 and 10400012.
When one of the nodes is an interval, this means that the other node is contained in this interval. When both nodes are intervals, this means that both interlap.
Possible solution
Remove the Duplicate Nodes
Can anyone explain this please
2.Error: InfoObject ZH_LKSTOM is not available for Datasource ZH_LONKLA_HIER
I am trying to load the hierarchy for the Info object ZH_LONKLA
Can anyone kindly help me out in these
Regards
Veena.

1.Error"Error in the hierarchial structure"
the hierarchy does have duplicate values. the possibility is that you are loading a set from R/3, where the system allows to have duplicate values in different nodes, but that doesnt hold true in the case of BI. so ask ur functional folks to nake the set unique and the load should go fine.
.Error: InfoObject ZH_LKSTOM is not available for Datasource ZH_LONKLA_HIER
I am trying to load the hierarchy for the Info object ZH_LONKLA
Not sure whats the relation between ZH_LKSTOM and ZH_LONKLA

Heirarchy - interlap error

Similar Messages

Maybe you are looking for