Helix: BSOD when going to sleep!!!

I have followed this and other threads about sleep issues with the Helix, written some posts, but not got wiser.
Lenovo Helix, 36986CG, W8.1 Pro 64b, Kaspersky Internet Security 2015, Malwarebytes Antimalware, , all updated, incl. BIOS (1.29), running TPFC for fan noise issue.
After reverting to W8 and upgrading to W8.1 again and running System Update, the problem persists. Tried several options, like disabling the Intel Rapid Start Tech, fiddeling with Power options, Hibernation enabled and disabled... Nothing helped.
I now have looked around in settings and logs and found out, the Helix/Windows is bluescreening, everytime its going into sleep mode. I first noticed it months ago when Firefox had problems reopening the tabs ("Now this is embarrassing" and so on) every time I start it, like after a chrash. And Firefox had no crash record. In Lenovo Solution Center, under Support: Configuration History, pick one day in calendar and choose System Events tab. Mine says 50+ events! Looking in C:\Windows\Minidump there are stacks of log reports, just from today, the last timestamp corelating to the last time it went to sleep.
I've noticed, when the Helix is going into sleep mode (lid open or closed), the LED blinks three times. As supposed to. But it doesnt glow short every half a minute, like it should when in sleep. Pressing the power button, the Helix starts from scratch.
BIOS and Power management are reverted to default (incl. disabling hibernation and go sleep when lid closed)) settings problem still there. Thinking about starting all over (clean install) but hesitate with the thaught of all the work and time involved in this... And I had a look in the Drives Management: There are 4 (four!) recovery partitions (1000, 450, 350 MB and 15,4 GB, as well as one OEM-Partition, 7 GB, and EFI-System Partition with 260 MB), what's that all about?
With all the threads about Helix and sleep in mind, is this a design flaw, Lenovo can't get around or don't they bother??? Or is there a solution out ther, non of us poor suckers with a Helix have found yet?

bamaster wrote:
When undocked and in tablet mode, how do I turn off the screen? Normal tablets would do this by tapping the power button. My Helix does nothing when I do that. I suppose I can swipe to Settings and Power to send it to sleep. But that's a little cumbersome.
Or is there a way to set the behaviors of the power button? Ideas?
Yes, in control panel - power options - change what the power button does: you can set the power button to sleep here.

Similar Messages

Macbook air keeps disconnecting from internet when going to sleep mode

New macbook air keeps losing Internet connection when going into sleep mode. Have tried deleting and re adding network and adding DNS 8.8.8.8 still is disconnecting.
Also, since Lion update 2 days ago Internet is very sluggish
HELPPPPPP!!!

You're not the only one. See here:
https://discussions.apple.com/thread/3704539?start=0&tstart=0
The current fix is to turn off sleep mode or use an Ethernet cable.

Macbook Air keeps crashing when going to sleep

Everytime my air goes to sleep it doesn't. Anyway when I go to log back on, it won't wake up, then when I finally manage to get the screen to appear again it tells me 'your computer restarted due to an issue. press any button to continue' and I'm presented with a crash log of
Mon Jul 30 10:29:25 2012
panic(cpu 0 caller 0xffffff80016bfefe): "Error 4 trying to transition CPU 1 to OFF"@/SourceCache/xnu/xnu-2050.7.9/osfmk/i386/acpi.c:179
Backtrace (CPU 0), Frame : Return Address
0xffffff8081d3bc70 : 0xffffff800161d5f6
0xffffff8081d3bce0 : 0xffffff80016bfefe
0xffffff8081d3bd40 : 0xffffff7f831ed075
0xffffff8081d3bd70 : 0xffffff7f831f050a
0xffffff8081d3bd90 : 0xffffff8001a596de
0xffffff8081d3bde0 : 0xffffff8001a74a12
0xffffff8081d3be20 : 0xffffff8001a3c14e
0xffffff8081d3be60 : 0xffffff8001a36742
0xffffff8081d3beb0 : 0xffffff8001a401d4
0xffffff8081d3bef0 : 0xffffff8001a402af
0xffffff8081d3bf30 : 0xffffff8001a45b8a
0xffffff8081d3bf80 : 0xffffff8001a45cb9
0xffffff8081d3bfb0 : 0xffffff80016b2677
      Kernel Extensions in backtrace:
         com.apple.driver.AppleACPIPlatform(1.6)[30560B54-EE96-3FCB-BFDB-95FEF56D5163]@0 xffffff7f831e3000->0xffffff7f83239fff
            dependency: com.apple.iokit.IOACPIFamily(1.4)[A35915E8-C1B0-3C0F-81DF-5515BC9002FC]@0xfffff f7f81b6e000
            dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f81c7a000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12A269
Kernel version:
Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64
Kernel UUID: 8D5F8EF3-9D12-384B-8070-EF2A49C45D24
Kernel slide:     0x0000000001400000
Kernel text base: 0xffffff8001600000
System model name: MacBookAir4,2 (Mac-742912EFDBEE19B3)
System uptime in nanoseconds: 1931574095035
last loaded kext at 12185661334: com.apple.driver.AppleHWSensor          1.9.5d0 (addr 0xffffff7f82f30000, size 36864)
last unloaded kext at 97149280273: org.navi.OemSMBIOS          1.0.0 (addr 0xffffff7f81d3c000, size 24576)
loaded kexts:
com.Cycling74.driver.Soundflower          1.5.1
com.attotech.driver.ATTOiSCSI          3.4.1b1
at.obdev.nke.LittleSnitch          3830
org.mozodojo.ITEIT87x          1.0.3
org.mozodojo.NuvotonNCT677x          1.0.1
org.mozodojo.WinbondW836x          1.0.1
org.mozodojo.IntelCPUMonitor          1.0.1
org.netkas.FakeSMC          4.2.0
org.tgwbd.driver.NullCPUPowerManagement          1.0.0d2
es.osx86.driver.EvOreboot          1.0.3
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.filesystems.autofs          3.0
com.apple.driver.AudioAUUC          1.60
com.apple.iokit.IOBluetoothSerialManager          4.0.9f8
com.apple.driver.AGPM          100.12.69
com.apple.driver.ApplePlatformEnabler          2.0.5d4
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleHDA          2.3.0f2
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f8
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleBacklight          170.2.3
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.AppleMikeyDriver          2.3.0f2
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.driver.ApplePolicyControl          3.2.6
com.apple.driver.AppleSMCLMU          2.0.2d0
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleIntelHD3000Graphics          8.0.0
com.apple.driver.AppleIntelSNBGraphicsFB          8.0.0
com.apple.driver.AppleUSBTCButtons          235.4
com.apple.driver.AppleUSBTCKeyboard          235.4
com.apple.driver.AppleUSBCardReader          3.1.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.0
com.apple.driver.AppleUSBHub          5.1.6
com.apple.driver.AirPort.Brcm4331          600.15.20
com.apple.driver.AppleAHCIPort          2.4.0
com.apple.driver.AppleUSBEHCI          5.1.5
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.iokit.IOSurface          86.0.2
com.apple.iokit.IOBluetoothFamily          4.0.9f8
com.apple.driver.DspFuncLib          2.3.0f2
com.apple.iokit.IOAudioFamily          1.8.9fc9
com.apple.kext.OSvKernDSPLib          1.6
com.apple.driver.AppleHDAController          2.3.0f2
com.apple.iokit.IOHDAFamily          2.3.0f2
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f8
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.AppleGraphicsControl          3.2.6
com.apple.driver.AppleSMC          3.1.3d11
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.iokit.IONDRVSupport          2.3.4
com.apple.iokit.IOGraphicsFamily          2.3.4
com.apple.driver.AppleThunderboltDPInAdapter          1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
com.apple.driver.AppleUSBMultitouch          235.7
com.apple.iokit.IOUSBHIDDriver          5.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.1
com.apple.iokit.IOUSBMassStorageClass          3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.driver.AppleUSBMergeNub          5.1.5
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.driver.AppleThunderboltNHI          1.6.0
com.apple.iokit.IOThunderboltFamily          2.0.3
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOAHCIFamily          2.2.0
com.apple.iokit.IOUSBFamily          5.1.6
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Anyone any ideas?

Why are these installed:
org.netkas.FakeSMC          4.2.0
org.tgwbd.driver.NullCPUPowerManagement          1.0.0d2
es.osx86.driver.EvOreboot          1.0.3
I have to assume with no other information that you are using a hackintosh, not an Apple computer, so we cannot assist you on these forums.

Beep when going to sleep

My MBA is often playing a beep sound whenever it goes to sleep. This beep sounds like it's coming from an internal speaker and not the sound card itself.
I've called Apple today and they asked me to restore something (by pressing CmdOpt+RP) and when I tried to put to sleep while the lady from Apple was on the phone it did not make the sound.
But after using the MBA for awhile, it's still making this beep when I close the lid. And just now, it made a beep while I was using it.
Any ideas? I ran the disk and system tests, repaired disk permissions but had no success yet.
This laptop is only 4 months old

Hi Raisen,
The Apple phone agent walked you through resetting the PRAM, which often times can resolve issues with a computer. Is the beeping noise only occurring when you go to sleep the machine by closing the lid? What if you sleep the machine via the software? Does it still beep?
Furthermore, what exactly does the beep sound like? I've seen scenarios on Apple portables where beeping can occur in many different ways so I tracked down some articles. Do any of those fit the bill?
http://support.apple.com/kb/HT1547
http://support.apple.com/kb/HT2130
http://support.apple.com/kb/HT1221

Imac turns off when going to sleep

Hi,
My imac shutdowns and I need to manually turn it back on - it has happened a few times now when I put my computer to sleep. Anything I can do to stop this? Should I be contacting Apple? Is this a big issue? Thanks Bethany
Console messages from first time today:
10-11-27 8:52:14 AM com.apple.launchd[1] * launchd[1] has started up. *
10-11-27 8:52:45 AM com.apple.launchd.peruser.50187 (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
10-11-27 8:52:53 AM com.apple.WindowServer66 Sat Nov 27 08:52:53 bethany-padusenkos-iMac.local WindowServer66 <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
10-11-27 8:52:56 AM com.apple.launchd.peruser.50187 (com.apple.Kerberos.renew.plist107) Exited with exit code: 1
10-11-27 8:53:00 AM com.apple.launchd.peruser.50187 ([email protected]) Exited with exit code: 1
Console message from second time that it turned off today:
10-11-27 1:50:32 PM com.apple.launchd[1] * launchd[1] has started up. *
10-11-27 1:50:56 PM com.apple.launchd.peruser.501[93] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
10-11-27 1:51:00 PM com.apple.launchd.peruser.501[93] (com.apple.Kerberos.renew.plist[121]) Exited with exit code: 1

If the computer successfully goes to sleep/wake, it will post lines in console like this:
Nov 28 18:56:47 computername kernel[0]: System Sleep
Nov 28 18:56:53 computername kernel[0]: System Wake
Do you get any lines like these around the time it happens?
Also, resetting the SMC might be a good thing to try:
support.apple.com/kb/ht3964

MacBook Pro os 10.8.5 loses wifi connection when going to sleep

Hi all. I've a domestic wifi network with 3 Macs, 1 Xbox and 3 Android mobiles.
Only the two MBP with OS 10.8.5 have the same problem: when gone to sleep, they do not re-find the network after waking up. I've to make them search for it manually (they find it immediately, then).
Any suggestion?

Hi all. I've a domestic wifi network with 3 Macs, 1 Xbox and 3 Android mobiles.
Only the two MBP with OS 10.8.5 have the same problem: when gone to sleep, they do not re-find the network after waking up. I've to make them search for it manually (they find it immediately, then).
Any suggestion?

Not backing up when going to sleep?

A few times each day, after my computer's been sleeping, it turns back on and says that hit had an error backing up. I then click okay and it seems that it's good to go for a while. But it always pops up again. I am guessing it has something to do with the system going to sleep right as it's beginning the backup process or the like, but am clueless as to how to figure out what's going on and how to fix it. Any and all thoughts appreciated.
Thanks!

Hi dhaz-
Greetings and welcome to the Apple boards.
Generally this behavior is caused by an external peripheral or internal PCI card.
Try disconnecting all USB and FireWire peripherals including hubs. If the mouse and keyboard are wired give each of those it's own USB port on the Mac. See if this solves the problem.
Luck-
-DaddyPaycheck

T61p: Vista - BSOD when resume from sleep / hibernate, casued by classpnp.sys

I've got a T61p (Type: 6457) with preinstalled Vista, later upgraded with SP1. Everything worked like a charm, untill a week or so, when the BSOD appeared when either resuming from sleep or hibernation.
I've checked the minidump, and it seems as the classpnp.sys is causing the trouble, however, I've yet not found a good solution to fix the problem (I'm close to doing a restore to factory install, but would like to avoid if possible
Anyone?
edit: typos
Message Edited by birwi on 04-12-2009 06:38 PM

There's an issue with your GPU, video driver or both...try running this for a while:
http://freestone-group.com/video-card-stability-test.htm
If there's an underlying problem, this test will reveal it. And when I say "a while" I mean for an hour or more...
Please be advised that if your GPU is on its way out (I've had them fail on T60p due to VRAM corruption) this test might just finish it and push it over the edge. Proceed at your own risk.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Helix freezes when resuming from sleep mode

Every time I close the lid, the Helix enters sleep mode. Then, when I reopen it and enter my password, the computer freezes, most often taking me to the Photos app. In order to resume work, I have to use the Power button to shut down and restart. Very frustrating -- can't even walk across the room with the lid closed without having to restart, often losing whatever I was working on. Any ideas?

Hi Yvonnerose,
Thank you for the reply!
1) Update your bios and update the Intel Management Engine firmware to the latest. Below is the link to enter the downloads page and download latest application accordingly, please click on "Select Product" then in "QUICK PATH" enter the MTM no. select the exact model.
http://support.lenovo.com/en_US/downloads/default.page#
2) if issues still persist, please check the installed RAMS or he secondary RAM installed as in some cases it has been found cause the interruptions. If the system is shipped with dual memory try running with only one RAM first to check if problem still persist.
3) If both of the above fails please contact nearby Authorized Lenovo service support teams, they will able to advise according on the next course of action.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

My iMac won't stay asleep, or it will turn itself off when going to sleep

If I select Sleep from the Apple menu, the screen goes blank, the light waxes and wanes once and the computer wakes up again.
When I allow it go to sleep by itself (my screen saver comes on after being idle for 15 minutes, then it should go to sleep after being idle for 45 minutes), then the screen goes dark, the light waxes and wanes once and then the light stays out, the display stays dark and after a few seconds the fans start running at high speed. It won't wake up by mouse or keyboard, I have to hold the power button for a few seconds, until a faint click tells me it's truly shut down. Then I can restart. I have tried resetting the SMU twice and that did not make any difference. What else can I do to make my iMac behave?
iMac G5 Mac OS X (10.4.7)

Welcome to Apple Discussions!
Does your Mac fall under this plan?
http://www.apple.com/support/imac/repairextensionprogram/

MAC loses IP address on Reboot and when goes into sleep

We have a couple macs running on a corporate network with a Cisco infrastructure. Windows servers on the back end providing DHCP. Macs are connected to Cisco 3500 or 3700 series switches.
When the macs go to sleep or stand by mode or even sometimes a reboot they do not grad an IP address or they loose their IP address and just have a 169.x.x.x ip.
We have to reboot a couple times or wait awhile for an IP to come up.
We have consulted Cisco and some local Mac dealers and no one seems to know what to do??????

Hi, and Welcome to the Disscusions robbamann!
If it's an encrypted network, One thing that can work, try this, please ignore the exact symptoms and connection and Hardware types, it's worked for many others than the stated...
http://docs.info.apple.com/article.html?artnum=304482
A workaround might be to use these in Terminal, or write a Script for them...
sudo ipconfig set en0 BOOTP;sudo ipconfig set en0 DHCP
sudo ifconfig en1 down;sudo ifconfig en1 up
Change the en# as appropriate.

2012 Mini crashes when going to sleep on Windows 8.1 x64 with 5621 drivers

When putting my 2012 Mac Mini to sleep on Windows 8.1, sometimes it will be unresponsive when I attempt to wake it with the keyboard/mouse. At this point the Mac Mini is off (no pulsing light) and when I press the power button it will cold boot (with the chime and grey boot screen).
This issue started after I installed the new 5621drivers. Any idea which driver is causing this so I can roll back that particular driver?

Never mind I solved my own problem. I normally put my computer to sleep using a shortcut that runs the following in a command line:
rundll32.exe powrprof.dll,SetSuspendState 0,1,0
However this shortcut only works correctly if hibernation is turned off, and I'm guessing updating the boot camp drivers may have enabled hibernation even though it appeared to still be disabled.
I went into the power options and enabled hybrid sleep and hibernation, then disabled them again. Then I opened a command line as administrator and ran the following command:
powercfg -h off
After this my sleep shortcut works again everytime without crashing Windows.

T440p BSOD when resuming from sleep

Hi,
I have a T440P that was getting blue screen of death every time I was trying to resume it from sleep. KB2459268 fix from http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS019407 and reduced the occurences from 100% to maybe 75% of the time.
The problem is very annoying as I have to keep the laptop always on in order not to reopen all applications every day. The BSOD description is:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 2057
Additional information about the problem:
BCCode: 34
BCP1: 0000000000050853
BCP2: FFFFF8800654E3A8
BCP3: FFFFF8800654DC00
BCP4: FFFFF800034E43A4
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\071014-8190-01.dmp
C:\Users\aaaa\AppData\Local\Temp\WER-23150-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Any ideas?
Thanks!

After more than a week with BSOD they are back and even twice a day.
@Hemanth I've uploaded the dump file to this location: http://www.filedropper.com/073114-8985-01
Using Windbg I got the following
1: kd> !analyze -v
* Bugcheck Analysis *
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffff80000003, The exception code that was not handled
Arg2: fffff800034c69d0, The address that the exception occurred at
Arg3: fffff880232903f8, Exception Record Address
Arg4: fffff8802328fc50, Context Record Address
Debugging Details:
EXCEPTION_CODE: (HRESULT) 0x80000003 (2147483651) - One or more arguments are invalid
FAULTING_IP:
nt!DbgBreakPoint+0
fffff800`034c69d0 cc int 3
EXCEPTION_RECORD: fffff880232903f8 -- (.exr 0xfffff880232903f8)
ExceptionAddress: fffff800034c69d0 (nt!DbgBreakPoint)
ExceptionCode: 80000003 (Break instruction exception)
ExceptionFlags: 00000000
NumberParameters: 1
Parameter[0]: 0000000000000000
CONTEXT: fffff8802328fc50 -- (.cxr 0xfffff8802328fc50)
rax=0000000000000000 rbx=fffffa801be67860 rcx=2f6b08deac100000
rdx=0000000000000008 rsi=0000057fe4192f78 rdi=fffffa801be6d3c0
rip=fffff800034c69d0 rsp=fffff88023290638 rbp=fffff88000ec62e0
r8=0000000000000001 r9=fffff8000350c090 r10=fffff80003459000
r11=fffff88023290638 r12=0000000000000001 r13=0000000000000000
r14=fffffa801be6d3c0 r15=0000000000000000
iopl=0 nv up ei pl nz na pe nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00000202
nt!DbgBreakPoint:
fffff800`034c69d0 cc int 3
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x7E
PROCESS_NAME: System
CURRENT_IRQL: 0
ERROR_CODE: (NTSTATUS) 0x80000003 - {EXCEPTION} Breakpoint A breakpoint has been reached.
EXCEPTION_PARAMETER1: 0000000000000000
LAST_CONTROL_TRANSFER: from fffff88000edb790 to fffff800034c69d0
STACK_TEXT:
fffff880`23290638 fffff880`00edb790 : fffff880`00ec6000 fffffa80`248ee6f0 fffff880`00ec62e0 0000057f`e4192f78 : nt!DbgBreakPoint
fffff880`23290640 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : Wdf01000!_FX_DRIVER_GLOBALS::WaitForSignal+0x70
FOLLOWUP_IP:
Wdf01000!_FX_DRIVER_GLOBALS::WaitForSignal+70
fffff880`00edb790 488b442440 mov rax,qword ptr [rsp+40h]
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: Wdf01000!_FX_DRIVER_GLOBALS::WaitForSignal+70
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: Wdf01000
IMAGE_NAME: Wdf01000.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 51c51641
STACK_COMMAND: .cxr 0xfffff8802328fc50 ; kb
FAILURE_BUCKET_ID: X64_0x7E_Wdf01000!_FX_DRIVER_GLOBALS::WaitForSignal+70
BUCKET_ID: X64_0x7E_Wdf01000!_FX_DRIVER_GLOBALS::WaitForSignal+70
Followup: MachineOwner
This time I couldn't find anything usefull and any idea would be greatly appreciated.
Thanks!

Split second white screen when going to sleep

Hi all!
I was just wondering if anyone else has noticed a split second white screen flash (every once in a while) when putting their display to sleep. On refresh, everything looks as normal.
15.4 in MacBook Pro w/ Retina Display

No, I have not experienced this issue

Slow going to sleep

Does anyone have any ideas how to speed my imac up when going to sleep , for the past few days it seems to take ages shutting down where as before it was quite quick i haven't downloaded anything or altered any settings . Im running Snow Leopard on an intel based imac , by the way i'm not to technically minded so simple is best

I recently experienced the same problem when selecting the sleep option from the apple menu. The problem started after installing Weatherbug. The sleep option returned to normal after quitting Weatherbug. Your problem may be different but this worked for me.

Helix: BSOD when going to sleep!!!

Similar Messages

Maybe you are looking for