Helix CPU remains throttled down after redocking

Dear all,
Here is a problem I've just noticed: when I redock the tablet on the keyboard, the CPU will never exceed 30 (occasionally 31%) usage and 0.75 GHz (occasionally 0.78), even under heavy stress (Intel Burn Test at maximum stress level, or CPU-intensive games), and even when temperatures are quite low (65° C) and fan speed far from being maximal (inaudible or just low noise).
I just checked the CPU speed and usage percentage using the Performance tab in the Task manager, so it might be inaccurate, but it is really clear that the CPU is clocked down. See the screenshot below during an Intel Burn test (it's in French, sorry):
Link to picture
I've checked dozens of times: the max CPU speed is set to 100% in the advanced power settings for the power management profile I'm currently using, i.e., High Performance.
If redocking does not revert the CPU to its full capability, then the convertible feature of the Helix is of extremely limited interest. I've realized that because I started to search why my Helix sometimes seemed to show lower performance when executing tasks or running applications, despite free RAM, SSD in good health and with free space, and no processus eating much CPU. In summary, I could feel the différence, and that's how I noticed that it was capped at 30%.
All my drivers and BIOS are up to date. What should I do? Anyone else experiencing this? I'm running the i7 version, quite a disappointment to only benefit 30% of this expensive Helix version...
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

Use a program like coretemp and after executing the program hit F4 or from the menus select logging. Run some processor intensive applications, either software (AutoCAD, hd video, etc.) or benchmark such as (IBT, Ortho, etc.) then review or post the csv here.
The multiplier is a ratio of the cpu clock rate and front side bus. For instance, with the Helix the fsb is just under/around 100mhz. The clock will either throttle down to 8x and speed up to 32x, resulting in cpu speeds between 800mhz to 3.2Ghz, respectively.
Helix: 3697 CTO.
Thinkpad user since IBM. I do not work for Lenovo or any entity working for Lenovo.

Similar Messages

P67a-GD65 (B3) 1.19 BIOS weird turbo boost throttling down issue.

Hi all,
I just upgraded from 1.14 to 1.19 BIOS because of a keyboard detection issue. For the last few years, I always used Turbo boost OC 4.0-4.3ghz.
Since the new BIOS, when I run Prime95, I notice that at first, the OC works well (goes from 1.6ghz to 4.0ghz) but after a while, it will throttle down to 3.9, revert back to 4.0, then 3.9 and sometimes even 3.8ghz.
CPU Voltage never goes above 1.280v.
While I was using the 1.14 BIOS, it never got below 4.0ghz, so I can't figure out what's new in 1.19 that would make the CPU throttle below the values I set for it.
Note that the CPU temp never goes over 62c, so I don't think it's thermal related.
Overspeed, 2013 and C1E disabled, all other stuff at defaults. My core ratios are x40, x41, x42, x43
I also tried 41-44, 42-45, 43-46 ratios, and everytime, it goes up to the minimum ratio (say 43), then after a while, it will always throttle down to 40, 39 and sometimes x38 (rarely but happens everytime though)
Any ideas?

First, I want to thank you for your help... it is much appreciated!
Quote
ll settings being done in the UEFI/BIOS, not the OS right?
Yes, all within the BIOS. 'Change settings in OS is disabled.
When I tried to disable the CPU Phase Control, the PC hung on Windows desktop. Tried both SVID & the other one but no changes (same throttling)
Correction: ONLY Intel SVID mode works on my setup -- the other two will hang on Windows Desktop (ASP Mode, Disabled).
I tried the values you provided with no changes either. :/
I did notice something weird though.
1) I downloaded 'Intel Extreme Tuning Utility' to see if the CPU was throttling because of thermal issues.
2) when I tested the CPU stress test (20 minutes), the CPU went and stayed at 4.10Ghz the entire 20 minutes! no throttling at all
3) I then decided to test the memory stress test, Prime 95, LinX, OCCT and the CPU will throttle down to 3.7 sometimes, but mostly from 4.0 to 3.9ghz on those tests. What does it mean? no clue (yet)
Starting to wonder if it's not the CPU Phase Control. I might reflash 4.3 BIOS to see if it fixes this error (freezing in Windows desktop when disabled), but I'd rather keep this BIOS for now .
I'll keep looking for the answer (let's not forget, I'm able to get a fixed OC at 4.2 no problem when I disable EIST, C-Phases and set the CPU at x42 & vcore at 1.250v)
Again, thanks much for your patience & help!
P.S. I've seen another thread about someone having this exact issue, but didn't take notice back then since I didn't know I had this problem. And now I'm trying to find it, I can't :( Can't even recall if it was on this site or another one.
Worst case scenario, I make myself a 24/7 OC (even at 4.2 ghz... when not doing anything special, the cores temp are about the same as when at 1.6ghz 0.9xxv) I'll actually go do that @4.2 & keep it a few days to see how it goes power usage wise/temps/etc. But if you have any other suggestions, feel free to let me know, takes but a few minutes to revert back to this OC (saved and/or not long to set).
P.P.S. Gotta admit that at full OC 4.2Ghz (no EIST, C1E, etc), I can actually feel the PC being more responsive. Applications start faster (albeit just slightly, but noticeable), everything just feels more snappy. Starting to wonder if I won't keep it that way.

MacBook throttle down from Bad Battery

Hi. I have a 2006 MacBook 2.0Ghz Core Duo.
Is a nearly dead battery the same as running the computer without a battery at all on AC in regards to CPU throttle down?
From what I have read, if only the AC is used and the battery is removed, the CPU will throttle down to 1 core. That's fine and makes sense to me. However, does the computer do the same thing if the battery is in but barely holding a charge (does OSX throttledown if battery is un/detected?) The battery meter still shows a charge of 100%, and I only get about 10 minutes max on battery power before it abruptly shuts off.
I use the computer for Aperture 3 and am plugged in 95% of the time. However I was just curious if this battery issue does affect the performance the same as no battery at all.
Thanks!

I have ordered another battery and waiting for it any day now.
My question was more along the lines of how dynamic is the PMU in the MacBook when it comes to the battery. Like is it that black and white between no battery and battery to see the performance decrease? My battery is total fail, and it shows this in the battery meter on 10.6. Because of this, is the PMU throttling down knowing that the battery is fail?
Guess I will find out when the battery comes....

Lenovo Helix i7 CPU cpu clock down after Bios 1.14

Hi all.
I have about 25 Lenovo Helix, and I must admit that I'm a little angry - I have found out that after bios 1.14, then run the only maximum 2.5 GHz, whereas before it ran 3.0GHz - not that I have purchased. It's an easy solution to the heat, just to clock the CPU down.
Is there anyone who can help me, what can I do? Some have bios 1.10 to lie, it works with the real speed. You can easily feel the difference.
Thank you

Use a program like coretemp and after executing the program hit F4 or from the menus select logging. Run some processor intensive applications, either software (AutoCAD, hd video, etc.) or benchmark such as (IBT, Ortho, etc.) then review or post the csv here.
The multiplier is a ratio of the cpu clock rate and front side bus. For instance, with the Helix the fsb is just under/around 100mhz. The clock will either throttle down to 8x and speed up to 32x, resulting in cpu speeds between 800mhz to 3.2Ghz, respectively.
Helix: 3697 CTO.
Thinkpad user since IBM. I do not work for Lenovo or any entity working for Lenovo.

CPUx: Temperature above threshold, cpu clock throttled

My cousin (Windows) computer suicided... it stopped
booting without any apparent reason.
He asked my help and we stored every important data in an
external drive using an arch linux installed in a usb key
(thanks to every wiki writer).
I thought it could be an hardware problem so I started
stress with with a command line like:
stress --cpu 2 --io 1 --vm 1 --hdd 1
(pwd was in a Windows mounted partition)
it is already one hour the program goes. I got the error
of the title few times:
CPUx: Temperature above threshold, cpu clock throttled
for both CPUs. I thought it was normal, after all
the cpu might overheat under stress and it slows down
to protect itself...
But suddenly I got a doubt, it is really the CPU that
slows down itself (so it is an hardware feature) or it is
linux that slows it down (so it is a kernel feature)? In
this second case do anyone knows if Windows do anything
similar?
Secondly in the error log I can see:
EDID checksum is invalid, remainder is 210
Raw EDID:
<hex dump omitted>
I sought in the Internet, but I could not understand what
it means nor if it is dangerous... can anyone help me?
Thanks

The BIOS is usually responsible for setting thresholds and has settings to halt the computer when those thresholds are too high.
Since the program is testing stress, I'm guessing the software is throttling the CPU so the system does not shutoff and the test can still process.
I would highly suggest checking your BIOS's tempertature thresholds, as well as the fan speed settings (BIOS or software).
I would also find out what a normal temperature for the CPU is and do some testing on what different loads do to the temperature.

HT1430 my iphone 4 turn off after appearing message "temprature high, need to be cool down after than doesn't becoming turn on"

my iphone 4 turn off after appearing message 'temprature high, need to be cool down' after that does not getting turn on by anyhow.

Hello vijaypatel,
Thanks for the question. The following article outlines the temperature warning that you experienced:
iPhone, iPad, and iPod touch (4th generation): Keeping device within acceptable operating temperatures
http://support.apple.com/kb/HT2101
If the iPhone is no longer powering on, we will need to isolate this issue to determine if it is hardware related.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
- Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
- Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
Learn about LCIs and corrosion.
- Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
- After at least 15 minutes, if:
               - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
               - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
               - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
- If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
               - If the display turns on, go to step 4.
               - If the display remains black, go to next step.
- Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
- If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks,
Matt M.

HT1414 my iphone has problem in open and if it open iphone shut down after few minuate

I have bought this iphone5 from Hannova German in April2013 and I am using this iphone5 in Nepal. In Nepal there is no authorized dealer. This problem came just from 15th July 2013. It has problem in opening and if it open it shut down after few minuate. So how to solve this problem and I think it has a guarantee period. I woud like your support to solve this problem. Thank you.
<Edited by Host>

Hi Prashun,
Thanks for visiting Apple Support Communities.
You can use these steps to troubleshoot your iPhone if it's powering off unexpectedly:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Regards,
Jeremy

Disp+work process was down after the Restoreing the backup

Disp+work process is down after the Restore of the backup
s/m configration: windows 2003 server + oracle 10g
The below is the log file
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        PRA
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    52
intno      20050900
make:      multithreaded, Unicode, optimized
pid        2928
Thu Apr 07 18:58:10 2011
kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2928) [dpxxdisp.c   1231]
     shared lib "dw_xml.dll" version 52 successfully loaded
     shared lib "dw_xtc.dll" version 52 successfully loaded
     shared lib "dw_stl.dll" version 52 successfully loaded
     shared lib "dw_gui.dll" version 52 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Thu Apr 07 18:58:15 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5233]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >pwsap_PRA_01                            <
DpShMCreate: sizeof(wp_adm)          18304     (1408)
DpShMCreate: sizeof(tm_adm)          3954072     (19672)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm)          528064     (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1452)
DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 05C00040, size: 4613144)
DpShMCreate: allocated sys_adm at 05C00040
DpShMCreate: allocated wp_adm at 05C01E28
DpShMCreate: allocated tm_adm_list at 05C065A8
DpShMCreate: allocated tm_adm at 05C065D8
DpShMCreate: allocated wp_ca_adm at 05FCBB70
DpShMCreate: allocated appc_ca_adm at 05FD1930
DpShMCreate: allocated comm_adm at 05FD3870
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06054730
DpShMCreate: allocated gw_adm at 06054770
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 060547A0
DpShMCreate: allocated wall_adm at 060547A8
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
MM diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
Thu Apr 07 18:58:16 2011
J2EE server info
start = TRUE
state = STARTED
pid = 3208
argv[0] = D:\usr\sap\PRA\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PRA\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PRA\SYS\profile\PRA_DVEBMGS01_pwsap
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1069
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=PRA
argv[7] = -DSAPMYNAME=pwsap_PRA_01
argv[8] = -DSAPPROFILE=D:\usr\sap\PRA\SYS\profile\PRA_DVEBMGS01_pwsap
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1617]
***LOG Q0K=> DpMsAttach, mscon ( pwsap) [dpxxdisp.c   11414]
DpStartStopMsg: send start message (myname is >pwsap_PRA_01                            <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Thu Apr 07 18:58:17 2011
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 52
Release check o.K.
Thu Apr 07 18:58:42 2011
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1472
     (SI_ECONN_BROKEN; I4; ST; 127.0.0.1:1085) [nixxi.cpp    4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3208)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Apr 07 18:58:56 2011
ERROR => W0 (pid 3216) died [dpxxdisp.c   14021]
ERROR => W1 (pid 3224) died [dpxxdisp.c   14021]
ERROR => W2 (pid 3232) died [dpxxdisp.c   14021]
ERROR => W3 (pid 3240) died [dpxxdisp.c   14021]
ERROR => W4 (pid 3248) died [dpxxdisp.c   14021]
ERROR => W5 (pid 3256) died [dpxxdisp.c   14021]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 3264) died [dpxxdisp.c   14021]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 3272) died [dpxxdisp.c   14021]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 3280) died [dpxxdisp.c   14021]
ERROR => W9 (pid 3288) died [dpxxdisp.c   14021]
ERROR => W10 (pid 3296) died [dpxxdisp.c   14021]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 3304) died [dpxxdisp.c   14021]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 3312) died [dpxxdisp.c   14021]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 07 18:59:06 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Fri Apr 08 01:59:06 2011
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program Cl User         Action                    Table
0 DIA     3216 Ended         no      1   0             0
1 DIA     3224 Ended         no      1   0             0
2 DIA     3232 Ended         no      1   0             0
3 DIA     3240 Ended         no      1   0             0
4 DIA     3248 Ended         no      1   0             0
5 DIA     3256 Ended         no      1   0             0
6 UPD     3264 Ended         no      1   0             0
7 ENQ     3272 Ended         no      1   0             0
8 BTC     3280 Ended         no      1   0             0
9 BTC     3288 Ended         no      1   0             0
10 BTC     3296 Ended         no      1   0             0
11 SPO     3304 Ended         no      1   0             0
12 UP2     3312 Ended         no      1   0             0
Dispatcher Queue Statistics               Fri Apr 08 01:59:06 2011
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          12
wake_evt_udp_now     0
wake events           total     8, udp     6 ( 75%), shm     2 ( 25%)
since last update     total     8, udp     6 ( 75%), shm     2 ( 25%)
Dump of tm_adm structure:               Fri Apr 08 01:59:06 2011
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks               Fri Apr 08 01:59:06 2011
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 07 18:59:11 2011
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >pwsap_PRA_01                            < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED

trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Thu Apr 07 18:58:16 2011
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\PRA\DVEBMGS01\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\PRA\DVEBMGS01\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\PRA\DVEBMGS01\exe\dboraslib.dll' is "700.08", patchlevel (0.46)
B New connection 0 created
M sysno      01
M sid        PRA
M systemid   560 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    52
M intno      20050900
M make:      multithreaded, Unicode, optimized
M pid        3216
M
M kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3216) [dpxxdisp.c   1293]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)          18304     (1408)
M DpShMCreate: sizeof(tm_adm)          3954072     (19672)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm)          528064     (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1452)
M DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 05C00040, size: 4613144)
M DpShMCreate: allocated sys_adm at 05C00040
M DpShMCreate: allocated wp_adm at 05C01E28
M DpShMCreate: allocated tm_adm_list at 05C065A8
M DpShMCreate: allocated tm_adm at 05C065D8
M DpShMCreate: allocated wp_ca_adm at 05FCBB70
M DpShMCreate: allocated appc_ca_adm at 05FD1930
M DpShMCreate: allocated comm_adm at 05FD3870
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06054730
M DpShMCreate: allocated gw_adm at 06054770
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 060547A0
M DpShMCreate: allocated wall_adm at 060547A8
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Apr 07 18:58:17 2011
M ThInit: running on host pwsap
M
M Thu Apr 07 18:58:18 2011
M calling db_connect ...
C Prepending D:\usr\sap\PRA\DVEBMGS01\exe to Path.
C
C Thu Apr 07 18:58:27 2011
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@PRA on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   0619F158   061A46F4   061A3F7C
C Attaching to DB Server PRA (con_hdl=0,svchp=061A3EC8,svrhp=061B5794)
C Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
C
C Thu Apr 07 18:58:28 2011
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c      4345]
C Detaching from DB Server (con_hdl=0,svchp=061A3EC8,srvhp=061B5794)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c    10704]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@PRA on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   0619F158   061A46F4   061A3F7C
C Attaching to DB Server PRA (con_hdl=0,svchp=061A3EC8,svrhp=061B5794)
C Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c      4345]
C Detaching from DB Server (con_hdl=0,svchp=061A3EC8,srvhp=061B5794)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c    10704]
B ***LOG BV3=> severe db error 1033      ; work process is stopped [dbsh#2 @ 1199] [dbsh    1199 ]
B ***LOG BY2=> sql error 1033   performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1403]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10019]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    vm = V-1
M
M *
M * LOCATION    SAP-Server pwsap_PRA_01 on host pwsap (wp 0)
M * ERROR       ThInit: db_connect
M *
M * TIME        Thu Apr 07 18:58:28 2011
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10204
M * COUNTER     1
M *
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3216) [dpnttool.c   327]

Mail shut down after launch

Even after Recovery installation of OS X, Mail on ly worked one day before Mail again shut down after launch and receiving incoming mails. Any who have a functionally solution to fix this subject.

Do a backup.
Quit Mail.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Go to Library/Containers/com.apple.mail. Move the folder com.apple.mail to your desktop. You must move the entire folder, not just the contents.
Restart, re-launch Mail and test. If the problem is solved, recreate any required Mail settings and import any emails you want to save from the folder on the desktop. You can then put the folder in the Trash. If the problem remains, return the folder to where you got it replacing the one that is there.
Information learned from Linc Davis. Thanks to leonie for some information contained in this.
Crashes/quits unexpectedly

Lightroom workflow slows down after modifying an image

Hi fellow users,
Lightroom 4.3 runs smoothly if I work on unmodified images.
However, if I apply modifications on an image, retouching it afterwards becomes much slower, even if I render a preview AFTER I made modifications on the image.
I tell you an example: I import a raw file to the program and I render it`s preview. Then I retouch the image - it works very fast, no waiting time, no Loading overlay.
Where the problem starts: I import a raw file, I apply some modifications on it (for example a preset), then I render it`s preview - then I want to do more modifications on the image, which becomes very slow.
I was monitoring the cpu usage of the computer. In the first case, the cpu usage during modifying the image is normal.
In the second case, it goes up to 100%.
It seems that applying modifications on an image makes working on it slow, no matter if you have the most up-to-date preview or not.
Anyone knows if it is normal or not?
Is there any solution to this?
Thanks,
Tamas
My configuration:
Windows 7 64 bit (up to date)
Lightroom 4.3 64 bit
Fast PC
lightroom settings:
camera raw cache: 20gb
video cache: 10gb

First of all, you can forget about the preview rendering, that's irrelevant. Previews are only used by the Library module, not the Develop module. In Develop, it's handled by the ACR cache.
Now, as for slowing down after initial adjustments, that's a variable I haven't looked out for. But it could well be correct (it would explain some weird results I got across two machines recently).
In general, Lightroom 4 performs well below expected standards on some systems, while others fly along, and it seems nobody can explain why. Long story, do a search on this forum and you'll come up with several lengthy threads. The problem is that there are so many variables in this that it's almost impossible to even define what "slow" means. And now you've added another (interesting) one...

My battery lifetime at my MacBook Pro Mid 2009 is down after 1 hour!

Mac Book Pro Mid 2009, running with Mountain Lion is down after 1 hour! I already replaced it with a new one, but same problem. There is also a warning to control the battery. SMC and PRAM reset done. Nothing helps. From time to time, the remaining time jumps from almost clear (20%) up tu 80%! And the process to calculate this time needs much time. Can anybody help me? Cheers

I don't recommend you to restore a Time Machine backup because the same problem will appear if there's a software issue. First, install Mountain Lion without restoring the backup and check that the battery works correctly

Windows 8.1 gradually slows down after hours. Speed returns normal if restart "explorer.exe".

I have Windows 8.1 Pro (x64) installed on Alienware M17x. The slowdown mostly appears as slow response in the situation such as open a folder/window, open/close/switch tabs in IE, drag window, and there's also cursor lag. It gradually
slows down after system boot, noticeable after 3-4 hours, really slow after 8-9 hours.
I have thought about many possible processes which can cause this issue, and then I found out that it's caused by "explorer.exe". If I kill "explorer.exe", the speed suddenly becomes normal. Then, I restart explorer.exe
again, it stays normal, and then it still gradually slows down again after hours.
I have checked driver or software compatibility. Also, CPU usage and Disk usage is normal.
Please give some advises, reasoning, or solutions.

SaccoSVD
The process that is causing the problem is called sidebar.exe and I am curious why it is running on a win 8 machine as I dont believe it is built in. (It seems to have over 22,000 instances launched so I suspect either malware or a broken app)
It is usually associated with a Vista machine, or updated win 7 machine. Did you do do a clean install? Have you run a malwarebytes scan?
Please download the free version of Malwarebytes.
Update it immediately.
Do a full system scan
Let us know the results at the end.
http://www.malwarebytes.org/products
Wanikiya and Dyami--Team Zigzag

Quicksilver shuts down after startup chime

Hello,
I got an old Quicksilver 2002 (933) which won't boot : it shuts down 3 or 4 seconds after the startup chime. What's wrong ?
Thanks

Thank you for your answer, but it didn't work.
I forgot something important in my first post : the story of this Quicksilver
So yes, I just acquire this Mac, didn't work at all. It was missing a screw on the CPU card. After adding the screw, the PM booted into my Tiger DVD. I shut down the PM to close it correctly. It didn't boot anymore for this time.
I tried PRAM reset, motherboard reset. I've taken apart all I could (modem, graphic card, hard drive, ...), I've replaced the PSU, but nothing. I noticed that when I try to boot without RAM, the powermac makes one beep (no RAM installed) but don't shut down after that ! So I tried with 2 different RAM modules on every RAM slot, but it didn't work. (each RAM module is PC133 and works fine on my iMac G3 DV SE).
I think the motherboard or the CPU is screw up, but which one ? Maybe I forgot one thing to make it work ?
Cheers, Aurélien
(sorry if my English is a bit bad, but I hope it will be understandable

Mac mini shuts down after 10 seconds..

At first today, the CDs and discs kept automatically ejecting and wouldn't read (obviously). So I keep putting them back in hoping it would read or hold something. Then I restarted and the Mac Mini shuts down after 10 seconds of the seeing the desktop. Did I fry it? I did hear a weird sizzling when I put my hand on top of the mini. And is this under any warranty - I bought it Feb. 07? Any help would be greatly appreciated.

Any thoughts on that?
One or two come to mind, not least that if the unit is under warranty now (as it clearly is) and they aren't taking this fault seriously, then buying AppleCare so it remains under warranty longer isn't the right solution - having them examine it and resolve the problem is.
There's no doubt at all that in the event there is a system with a suspected fault, extending the warranty long enough that the system ceases to function and can be repaired is a good thing, but it shouldn't be necessary to go to that extreme in order to get a problem resolved now!
I would simply take this elsewhere and have it looked at. While odd noises are sometimes hard to hear in an environment where there are people and other activities going on, and thus it is reasonable to expect diagnosis of them to prove difficult, a system that shuts down of its own accord after a few seconds is clearly not working correctly. To be sure, if it is overheating, then testing it when it's cold is likely to miss the problem, but the description of the fault from the user ought to give enough clues to put the system on test long enough to see what happens when it warms up. If the fault can't then be replicated with a system that is at normal running temperature and under load, then giving it a clean bill of health is reasonable.
Thus, in your place I would ask them if they did, in fact, test it in that way. Alternatively, write a description of the fault, specifically identifying the premature shutdowns and the circumstances in which they happen (if they still do) and the noises and the circumstances in which they occur (if they still do) and take the system and description to an approved service provider and let them look at it.
If the shutdowns are no longer occurring, and the noise is absent, then whether you buy AppleCare or not is really a matter of how confident you are that the problem has gone. If you have doubts that the system is running correctly, AppleCare is expensive but at least extends the warranty sufficiently that you can stop worrying too much. Alternatively, if the problem(s) still persist, rather than AppleCare, have the system examined and repaired right now.

Re: Satellite A105 shuts down after 60 seconds (NOT a thermal problem)

Satellite A105-s4344 shuts down after EXACTLY 60 seconds. The mobo has been removed from bezels and all un-needed devices removed (DVD, HDD, WiFI etc.). Swapped CPU and RAM with known good ones. Swapped AC adapter and battery with known good. Does the same on AC or DC only inputs.
I have not yet flashed the BIOS (with 60 seconds this would be foolish). But, I am looking into replacing or reflashing with an EEPROM burner. Currently has V 2.0
I am not sure what genration heat detecting this system uses, but it is a possible cause if it is one of the later generations (visit http://www.topbits.com/how-to-monitor-cpu-temperature.html if you do not know that I am refering to).
Prior to reballing the north and south bridge, and flashing I figured I would get some input from you folks. Just to cover all bases ;)
P.S. the first person to ask what OS I am using will get an instant ticket to the bottom of my respect list.

>P.S. the first person to ask what OS I am using will get an instant ticket to the bottom of my respect list.
:) :) :) Best thing I saw in this forum.
Back to your problem.
I am not technician but here just my opinion about all this. The fact is that after switching your notebook ON CPU in just few seconds reaches very high temperature. You can switch your notebook ON and just enter BIOS settings and the same should happen again.
I cannot say for sure if this is 100% thermal issue or not but what else can be responsible for switching off? CPU will be hot in few seconds only. Material change structure with temperature change and I can just imagine some contact will be interrupted.
On this forum we had many similar reports like when cold notebook starts and runs well but after short time switches off for no reason. Maybe I am wrong but for me it sounds like thermal or bad contacts issue. Lets see what other people have to say about it.

Helix CPU remains throttled down after redocking

Similar Messages

Maybe you are looking for