Helix - Exact dimensions of screen+bezel and cutout locations for custom screen protector?

Hey Helix owners,
I want to get a screen protector for the Helix, but I don't want the anti-glare one offered by 3M. Photodon prints custom screen protects to dimensions you give them. I was hoping to get the dimensions of the screen+bezel and the cutout locations for camera and tablet button... I'm not able to measure these very precisely myself. Anyone know where this information can be obtained?
I called 3M and they sent me a data sheet for their anti-glare protector, but it contained no info on dimensions and cutout locations.
Dylan

Hi,
I'm from germany so no 'best buy' but I think I will lock around sleeve/bag for a different product with same measures. Any tip?
The clear plastic case is not what I want. I would like to use the player without such protections. I just want a sleeve to protect the player while its in my jacket/pants.
Btw, i have bought this version: Creative Zen (maybe european version?). I also doesn't seem to have your mentioned sleeve. I also couldn't find it on the website.
Anyway, thank you,
Chris

Similar Messages

Material document ,quantity and stock location for a given material

hello all,
i have a requirement like this.
in the selection screen i have,
material.....
plant....
posting document date.....
i need to get material document number,quantity,units and stock location for the above mentioned selection criteria...
what tables do i need to use..
do i need to use any BAPI or Function module..
thanks in advance...

Hi Vinay ,
Look into table MKPF & MSEG for material document
anf for quantity in MARD
Regards
Yogendra Bhaskar

Default Plant and storage location for components in MFBF

Hi,
I have 2 plants 1000-procurement plant and 2000- production plant. I am using special procurement key 70( Withdrawal from alternative plant from 1000 to 2000) for components in Plant 2000. The requirements for the components are transferred from 2000 plant to 1000 plant. The 1000 plant run MRP for the dependent requirements and procure the materials and transferred to the production storage location in Plant 2000.The raw materials are purchased in plant 1000 and transferred to Plant 2000 production storage location based on the manual reservations created with movement type 301. This is fine.
But when I do backflush in MFBF the plant and storage location for the components issue are displayed as plant 1000 which is the procurement plant and the production storage location in plant 2000-production plant location. In the BOM the production storage location is production storage location of plant 2000. Since we use the special procurement key system defaults the plant as 1000(procurement plant) insteadd of 2000(production plant). can we make this plant default to the production plant 2000 as default in the MFBF goods issue screen.
thanks and regards
Murugesan

Hi MURUGESAN !
      Can you give me some information more in Special Procument Configure in plant 2000 like:
          - Procurement type (maybe F)
          - Special procurement (Maybe U)
          - Plant (Maybe 1000).
          - Issuing plant (maybe 2000)
       We will check together.
       Regards,
      Tony

How to clear the open items and parked items for customer

Hi Experts,
I need to clear the open items and parked items for customer.
So any one could let me know the transaction code and procedure for clearing the items for customer.
Best regards,
Kesava balaji.

Hello,
Parked items will have NO RELEVANCE, unless you post it.
You CANNOT clear parked items.
You can clear the posted items using F.13 or F-32
Regards,
Ravi

How to find out the plants and storage location for a given company code

hi
How to find out the plants and storage location for a given company code

Hi
Check for Assignem,ent of Plant & compnay code in OX18
& for Combination of Plant & Storage location in OX09
The total org structure can be viewed in EC01 - Click on Structure -> navigation
& Continue, Click on the Compnay code & the wole structure can be viewed
Thanks & Regards
Kishore

Need to determine plant and storaeg location for item in delivery

Hello All,
I have an inbound IDOC which changes the quantity of items in a delivery and also adds new items if necessary. I need to do a auto PGI also if required.
Am using BDC to update the delivery. Now the problem is when I add a new item to the delivery. I add the material, quantity and Unit recieved from the IDOC. I need to determine the plant and storage location and fill that too in the delivery.
Kindly let me know how I can determine these two values. Which table holds this data?
Please note that I am changing only the delivery. The document preceding the delivery wont be changed.
Thanks for your help.
Regards,
Johnson

normally the plant is determined on this basis:
customer inforecord (table KNMT)
customer master (KNVV)
material (MVKE)
The storage location is determined in table TVKOL based on:
shipping point (you have it in delivery header LIKP-VSTEL)
plant (see above)
storage conditions (material master MARA-RAUBE)
regards
Roberto

Vendor and vendor accounts for custom duties

Hi,
I have to pay custom duty to the government for the imported goods. Do we need to create a vendor master for government in this scenario or if not how can we tackle that it? Do we need to have a separate reconciliation account for this or are we using the same account that we use for trading vendors?
Thanks
M.K.

Hi MK,
The Vendor account creation for Custom vendor is a normal process, just like you create any other vendor.
As regards a separate recon account, the normal Vendors show liability for good purchased, whereas this would be liability for taxes and duties..
You can assign the same recon account, which you assign to all other vendors for Taxes like Service tax, Excise, TDS etc..
Regards,
Kavita

Networking iTunes and central location for music

Starting to get really frustrated with something I think should be simple. We have multiple computers in our home and a Mac Mini server I'd like to use for a centralized location for ALL of our iTunes music. I've created a shared media library for all of the media I've downloaded to the server and can see it on all of the computers. HOWEVER, we just made our first iTunes purchase since setting this all up, only to discover we can't download music directly to the server - we have to download it to the individual computer, copy it to the server, then manually add it to the server's library. ***?
There's got to be a better way to do this. Can't we have all of the computers in the house reading from the server, and when new music is added set it all to go to the same library on the server that updates automatically when new files are added? Anyone help?
Thanks.

Jolly Giant wrote:
while you wait for your feature request(s) to be implemented, you might want to have a look @ this (rather old, to be sure) article.
And make sure to read all the comments posted at the end of that article; there are a number of sad stories of users who didn't heed the restrictions and others who were confused by the typos and poor editing of the story (particularly the complication produced by the unnecessary use of DropBox in the procedure.)
-Steve

OWB 10gR2 : How to configure ctl and log locations for Sql*Loader mappings?

Hi all,
I'm using OWB 10gR2 to load data in tables with Sql*Loader mappings.
In my project I have a datafile module and an Oracle module.
When creating an sql*loader mapping in the oracle module, there is two properties for this mappings that I want to modify. The first is Control File Location and the second is Log File Location. Values for those properties are equal to the data file module location. When trying to change those values I can only chose "Use module configuration location".
Somebody knows how to configure those properties with different locations as the one of the flat file module?
What I want to do is to store the data file in one directory, and control file and log file in other directories.
Thank you for your help.
Bernard

Hi,
You're right, my problem is that the dropdown only show the location associated with the flat file location even if I have other file locations created in the design repository.
The good news is that I have found the solution to solve the problem :
1) Edit the file module and in tab "Data locations", add the locations you want to use for control file and log file.
2) Open configuration window of the mapping and then the dropdown for properties Control File Location and Log File Location show new locations
I have tested my mapping after changing those properties and it's working.
Bernard

How to configure and save presets for custom scanning?

There are 5 presets in Acrobat XI for scanning files: "Autodetect...", "Black &White...", "Grayscale...", "Color Doc...", and "Color Image".
There is also an option to to do a "Custom Scan..." and "Configure Presets" (modify the 5 above).
However, I could not find any way to create my own custom presets.. is that not possible?
I was hoping to at least save my configuration(and/or possibly create a few different custom scan templates) in the Custom Scan for future scans but that was also not an option.
I would gladly use the 5 presets and configure them to how I want them but its unfortunate there are no output options there to automatically append a scan to an existing file or create multiple files from a continuous scan.
So... 1) Can you create custom presets for scanning? 2) Is there a way to configure output options in the existing scan presets? Thanks!

Pavanmeet,
you have to set all activities in the workflow to "general task" as well, not only for WS12300111 itself (doubleclick on each symbol with the "triangle").
check the status of the sent leave request in transaction PTARQ (Display Documents). Here the "next agent" & the "pers. no" of the next agent is of interest.
logon with the user, that is saved in infotype 0105 of the above mentioned pers.no. there should be the approve request.
you can check the status of the workitems with SWI1 (i assume your system is prepared for workflows , check SWU3)
Message was edited by: Achim Hauck

Ldapclient and multiple location for searching

When I try to change some of the parameters with ldpaclient using semicolon part of command after semicolon is not accepted.
On http://docs.sun.com/app/docs/doc/806-4077/6jd6blben?a=view I read that if I want to search in ldap on multiple locations I have to split multiple parameter with semicolon.
I try folowing:
ldapclient mod -a serviceSearchDescriptor=passwd:ou=east,dc=example,dc=com?one;ou=west,dc=example,dc=com?one
#ldapclient list
NS_LDAP_SERVICE_SEARCH_DESC= passwd:ou=east,dc=example,dc=com?one
but part after semicolon (;) is missing and authentication for group ou=west,dc=example,dc=com doesnt work.
Is this some bag in ldapclient?
My version of solaris is:
#uname -a
SunOS Ultra25 5.10 Generic_127127-11 sun4u sparc SUNW,A70

if I put argument in quotes command work properly.
#ldapclient mod -a serviceSearchDescriptor="passwd:ou=east,dc=example,dc=com?one;ou=west,dc=example,dc=com?one"

How to enable Like/Unlike, paging and searchbox functions for customized blog view list with JSLink.

Hi All
I am trying to customizing a view list which based on a blog template( =AllPost.aspx ) bu JSLink. The view need below 3 functions.
1. User can set Like/Unlike for each item on the list view.
2. User can move page by standard like page navigation buttons( prev/next ).
3. User can search the specific item by searchbox keyword.
I tried to overrideCtx.Templates.Item and overrideCtx.Template.Footer in .js - customized footer returns RenderFooterTemplate(ctx).
a). Like/Unlike function worked fine.
b). Page navigation and search did not worked.
Next, I tried to overrideCtx.Templates.Body -
a). Like/Unlike function worked not fine. - when the user clicks Like/UnLike on the page(n>2), list view moves top(n=1) after the below code executed.
EnsureScriptFunc('reputation.js', 'Microsoft.Office.Server.ReputationModel.Reputation', function ()
Microsoft.Office.Server.ReputationModel.Reputation.setLike(
ctxObj,
listId,
itemId,
like);
b). Page navigation and search worked fine.
Finally, I override both Item and Body with almost same code(differs set for the item object).
After that all functions work fine, but I can not understand
why.
Does anyone have explanation of that or another way?

try this links for button funcitonality:
https://social.msdn.microsoft.com/Forums/en-US/6a19b015-83a3-4cf3-a5da-216133ce936b/need-next-previous-button-on-list-view-webpart?forum=sharepointcustomization
http://maulikdhorajia.blogspot.com/2011/06/sharepoint-2010-customize-paging-in.html

Planned Order for stock and planned order for customer requirement

Hello everybody
I want to make a different, in MD04, between the planned order for stock and the planned order created for a customer requirement
Thank for your help

Hi,
True planned order are generated for both the cases but the planned order generated for sales order will have sales order number in the below column and for stock will show independent requirement. Mainly no sales order reference will be there for make to stock scenario.
Hope it will help.
Regards,
Alok Tiwari

CIS and JSLT question for custom metadata

Hello,
I have a content type called 'Event' that has a custom metadata field 'EventDate'.
events.jsp looks like this:
<fmt:formatDate value="${event.releaseDate}" pattern="MM/dd/yyyy"/>-<fmt:formatDate value="${event.expirationDate}" pattern="MM/dd/yyyy"/>-${event.contentID}
event is an element of a List generated from ISCSSearchResponse.getResults()
Instead of releaseDate and expirationDate, I want to reference the custom metadatafield 'EventDate'.
How do I do this? There is a method ICISProperty getProperty(java.lang.String name), but I don't know how to format it in JSLT.
Thanks,
Mitch

There is no documented way of doing that. I haven't seen anyone describe an undocumented way either.

Not getting any Data for Batch and storage Location for 2LIS_03_UM

Hi All,
My requirement is to extract Data from 2lis_13_vdkon from R/3 source system.
currently we are on R/3 PI 2003_1_470, For 2lis_13_vdkon we need to upgrade to PlugIn 2004_1.
we are planning to upgraded to Solution Tool 2008-1, will that be helpful or we need to upgrade to PlugIn 2004_1.

http://help.sap.com/saphelp_nw70/helpdata/en/7f/0f8c4037fba62be10000000a1550b0/frameset.htm
Available from OLTP release
4.0 B
Delivery with
PlugIn 2004_1
Prerequisites
Prerequisite for the use of the extractor is the R/3 core SAP Note 673964 or the corresponding support package.
regards,
Colin

Helix - Exact dimensions of screen+bezel and cutout locations for custom screen protector?

Similar Messages

Maybe you are looking for