Helllp, i dowload itunes update and now i got a message saying:this copy of itunes is corrupted or not installed , reistall again...
i dowloaded a update for itunes and now when i try to open it tells me:
this copy of itunes is corruped or not installed....its telling me to reinstall...someone help please lol
when it was in the middle of updating itunes closed .......i duno if that matters....
No, you SHOULDN'T lose your library. I say SHOULDN'T because over the years, I've lost quite a few songs by updating iTunes. I'm not sure why that is but it happens. Other than maybe losing a couple of songs here and there (IF that even happens at all to you), your library should remain intact.
I recommend UNINSTALLING iTunes on your computer first (if it shows up in the Uninstall Menu) and then installing iTunes 11 from a fresh download.
Any version of Windows should have a similar process for uninstalling a program. I've been using Windows since Windows 95 and I now use Windows 7 so I know the process is similar now matter which version you use. I will tell you how I do it in Windows 7.
Start > Control Panel > Uninstall A Program
Then scroll down the menu until you find "iTunes" and highlight it. Then at the top of the screen, select Uninstall. Let Windows finish uninstalling it (it may require a Restart of your computer). Follow all the steps to uninstall it.
Then visit http://www.apple.com/itunes/download/ and get iTunes 11 for your version of Windows. Download it and install it.
This SHOULD fix the problem. Once you do that, you'll need to go through the process of locating your library though the iTunes Preferences menu. Once your library is sync'd with iTunes, you should be ready to enjoy your music again.
I hope that works for you!
Similar Messages
-
After restoring Windows I tried to open iTunes and got a message saying 'This version of iTunes has not been correctly localized for this language. Please run the English version.
What do I do? I don't want to lose my entire liberary!Hi there computerfailure,
You may want to try removing and reinstalling iTunes as an initial troubleshooting step. Take a look at the article below for more information.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
-Griff W. -
I've iTunes 10.5 beta and today shows a window wich saying " This copy of iTunes will expire in 81 hours"
Yes, beta versions of software often are set with an expiration date.
Did you have a question? If so, you should post in the private forums for developers, to which you have access as a member of Apple's developer program.
Regards. -
i have just installed the latest update and the following message has come up. Text box - Unable to locate component. Message - the application failed to start because MSVCR80.dll was not found. Re-installing the application may fix the problem.
I have tried reinstalling and it has not helped.
I have gone to uninstall what ever is installed on the computer but cannot find itunes in the program list but do not want to just delete all apple applications with out knowing what they are. So, how do i delete the existing itunes program on my compouter??
I am also hoping that i will be able to do a restor eform the cloud once i get this sortedHello, fletch72.
Thank you for the question. I see you have uninstalled, reinstalled and the error is persisting. Try one more time uninstalling all components of iTunes in the order specified of the article below. These steps must be processed in the order specified or the error will persist. Once this is done attempt to install iTunes again.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
If the issue persists, you will need to process the steps in the article below for each component and reinstall.
"The feature you are trying to use is on a network resource that is unavailable" alert when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H. -
i have been using firefox on my computer for four years. now you force an update i didnt even want, cuz everything was FINE already, and now if i try to use firefox, it says it cant even be used on my computer. i want to watch my shows, i dont want to spend hours resetting things up or waiting for an email to tell me what im supposed to do. why in hell do you force updates when things are working just f-ing fine, that make everything worse, why cant anything that works ever just be left alone to work.
hello, the last version that was compatible with os x 10.4.11 is firefox 3.6.28 - you can download it from here: [http://www.mozilla.org/en-US/firefox/all-older.html]
[https://support.mozilla.org/en-US/kb/install-firefox-mac?s=installing&r=7&e=es&as=s#os=mac&browser=fx35 Install Firefox on Mac]
afterwards please disable automatic-updates in preferences > advanced > updates so that it doesn't happen again... -
I got this When I last updated itunes. Can some please help? I cannot open itunes and it is anoying!!!
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I have a Toshiba laptop, Windows & Home Premium Edition operating system. I had FF 3.6.3 installed and up until 6:00 today it was sort of working properly. I find out later that my huasband cannot even open the browser, as every time he does, a dialog box opens up whcih says "UPdate cannot be installed. Please make sure no other copies of FF are running on computer, then restart FF to try again." But I do not have any other copies of FF. I really do not like it when FF auto installs stuff without my permission. Many times this stuff is downloaded and installed, only to raise havoc with my computer.
Try a smc reset:
http://support.apple.com/kb/HT3964 -
itunes won't open it gives a message saying "this version of itunes has not been correctly localized for this language. please run the english version" i have a large library
Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now? -
I did the iTunes update and now I am getting a Windows error 126 message.
I did the iTunes update and now I am getting a Windows error 126 message. Now I can't use iTunes at all. Any ideas?
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99606) -
Itunes updated and now it won't work. I unstalled it and reinstalled the older version and reinstalled a older version and it still won't open. Says the itunes
library won't work with the older program. Please helpIt says it cannot removed the older version of iTunes.
Doublechecking before proceeding ... what's the precise text of that message, please? (There's a couple of different ones I can think of that you might be getting.) -
Download new itunes update and now it wont let me sync
Download new itunes update and now it wont let me sync. Keeps saying I need 26gb of free space which it didn't say before I downloaded the update. It doesn't make sense. It keeps saying:
The iPod cannot be synced because there is not enough free space to hold all of the items in the iTunes library. (additional 26gb required)
This makes no sense because before the new itunes update there was no problem with me not having enough space. I have 5gb of free space now and I had 5gb of free space before I downloaded the itunes update. Nothing should've changed. And I should not need an extra 26gb of space. How do i fix this problem so I can my ipod normally again.Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
Come back with the results.
An "other" larger than about 1 1/2 GB indicates corrupted files.
What is the Other on my iPhone and How to Remove It
What is "Other" and What Can I Do About It?
and as necessary:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
my itunes wont work I just installed some new update and now it wont even come up, I click the Itunes icon and nothing happens. Please help me I've tried uninstalling it and downloading it again but that didnt help :/
DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....
-
I have just updated my ITunes software to the latest as prompted. I purchased songs as wanted and then closed it down and have been billed accordingly. Since trying to open ITunes again. I have been met with the message saying This version of Itunes may be corrupted or not installed properly. Reinstall I Tunes.
Please advise what has happened and what I need to do (using windows 7)Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now? -
I installed the latest itunes update and now nothing plays
I installed the latest itunes update and now nothing plays. No music, radio etc. Have others experienced a similar problem?
I just tested mine and my music and videos played without a problem. Suggest you re-download iTunes 10.4.
-
I completed the iOS 7.0.2 update and now my screen is locked in the Connect to iTunes position. I am not near my home computer so I cannot connect to iTunes. Please let me know if there is a way to recover this without connecting to a computer.
Use iTunes on any computer to restore your iPhone. Your data
will be gone, but your iPhone will be functioning. You can restore
when you get home.
You may wish to look into iCloud to prevent data loss in the future:
http://support.apple.com/kb/HT4436
Maybe you are looking for
-
Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don't know how indesign can do this action.
-
I bought my new macpro last week, and have just realised there's no iphoto. I'm sure there's supposed to be, but it's not there!! Any ideas?
-
New filter on KNVV-LOEVM (Deletion Flag)
Hello, I wanted to add field KNVV-LOEVM as filter in CUSTOMER_MAIN Adapter Object. For now I have only VKORG, VTWEG and SPART from KNVV in CUSTOMER_MAIN (standard). How can I add new Fields to filter in CUSTOMER_MAIN Best Regards
-
2 MERGE statements in same trigger - is it possible ?
Hi guys, I have an After Insert trigger (on table A) that takes the last record from table A and insert/update it on another table (B) then insert /update in same table (B) some records which depends on it. When trying to insert data in table A, the
-
Hello, I recently bought an iPhone 6, 64GB from Apple Store Webpage. I have a problem with 4G connection. When I active the 4G connection, after a couple of seconds, "No Service" is appeared in the status bar. I'm sure I'm in the coverage of 4G netwo