Hello all - Newbie here wanting help transferring files

Hello all
Have had my Blackberry Curve for a couple of months and have mastered the basics.  I did transfer music and photo's from my PC to my Blackberry fine but all of a sudden there is a problem with this.....I can't transfer anything to my Blackberry now - either by  PC or by Bluetooth.  My PC gives an error message that each file cannot be transferred and my Bluetooth is paired with the other device but will not send anything!  Can anyone help?
Mel x

Hi MadamMel,
Welcome to BlackBerry Support Community Forums.
Bluetooth file transfer is supported only between two BlackBerry smartphones. Can you provide more information on what happens transferring the files via USB please? Do you have a media card in your BlackBerry? What version of BlackBerry Desktop Manager do you have installed? Are you using the Desktop Software to transfer media files? What happens when you try dragging media files onto your media card from Computer/My Computer using Mass Storage?
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Similar Messages

  • Hello, failing miserably here,  cant import nef files from aperture 3.1.2 to iphone 4.  I am syncing with the projects and smart albums and I am only able to sync the jogs and psd's   Anyone out there to aid this frustrated photographer??

    hello, failing miserably here,  cant import nef files from aperture 3.1.2 to iphone 4.  I am syncing with the projects and smart albums and I am only able to sync the jogs and psd's   Anyone out there to aid this frustrated photographer??

    See my reply to a later simplified version of your question. I don't think that either iPhone or iPad recognize RAW files such as NEFs. And the iPhone is not designed to be a mass storage device like a portable flash or portabel hard drive for temporary storage of files, if that's what you're after.  As I mentioned in my previous reply, I have an iPad and have been experimenting with it as a tool for photography, hoping that it would be a nice travel tool for backing up and viewing photos from my Nikon dslr. But both the iPad and iPhone just are not set up to do that well. Both show photos nicely, but organization of photos is very frustrating since you can't create albums on the iPhone or iPad, but only back on your sync computer. (There is one very powerful photo organization app called SortShots, but you import photos to it and it organizes and stores the images wtihin the app not using the native photo app. It doesn't work with NEFs either.) I don't know of any RAW processing software for either device.

  • Help transfering files from IMovie to NAS (Synology)

    Hi,
    Hopefully someone here can help me, I am interested to move my IMovie events to my Synology NAS, I am not interested in using the NAS as a server for IMovie, I plan to view these videos independently of my Mac.
    Initially I have copied the files over manually however when I attempt to play the movies though the NAS I get sound and no picture. I understand this is to do with the AIC codec which my Synology (DS214) cannot transcode code.
    Is anyone aware of a way I can move these files in bulk whilst transcoding them to a compatible codec?
    Thanks for your help.

    Hello Elogeez,
    Thanks for using Apple Support Communities.
    I'm not sure what version of iMovie you are working with, but I have found articles referring to the moving of iMovie content with the current version, and iMovie '11.  There is no need for any transcoding necessary, as the files are to only be referenced by the iMovie application, and not to be opened from Finder.
    iMovie '11: Copy or move a project to an external hard disk
    http://support.apple.com/kb/ph2289
    iMovie (2013): Work with multiple libraries
    http://support.apple.com/kb/PH14745
    If you are using iMovie '08, follow these instructions:
    iMovie ’08: Storing or moving your video library to an external hard disk
    http://support.apple.com/kb/ht1097
    Take care,
    Alex H.

  • New mac user needs help transfering files from Dell...

    I have a Dell running Windows XP and need help transfering the files from the dell to the mac.
    Also I have no idea what OP system I have, how do you tell which one you have???

    Go to the blue Apple menu and scroll down to "About this Mac"
    In the summary window that opens you will find the following information:
    Mac OS X version (assuming you are running OS X)
    Processor speed.
    Memory
    Startup disk
    The More Info button will take you to an in-depth overview of hardware, network set-up and installed software.
    As far as transference is concerned, you can either transfer files via CD, DVD, external hard drive... or by networking the two computers.
    Here's a link for an overview concerning Mac to PC connectivity:
    http://docs.info.apple.com/article.html?artnum=19652
    I hope the above helps.
    Reagrds
    Tony
    G5 iMac, G4PB, iMac DVD 450Mhz   Mac OS X (10.4.2)  

  • Hello. is somebody here to help me out fix a problem

    is somebody here to help me out fix a problem

    Yep, lots of people here likely can help you fix your problem, as soon as you tell us what it is.

  • Help transferring files from old Mac 10.3.9 to new Mac 10.6.1

    Hi - I just bought a new iMac with Snow Leopard and I am trying to transfer my old files from my iMac running 10.3.9. I connected a FireWire cable between the two and restarted the old iMac while holding down the "t" key, using Migration Assistant on the new iMac. Migration Assistant kept saying that it was waiting for the old iMac to restart, even though the old one HAD restarted. I looked on the forums and saw that I should try to run Setup Assistant from the Utilities folder on the old iMac. But there isn't a Setup Assistant in the Utilities folder.
    So I am at an impasse. Any suggestions would be greatly appreciated!

    Some of the items I've found via searching suggest to avoid transfer or migration of older
    files from the ancient 10.3 over to the newer 10.5 or 10.6. And when the old computer is
    a PowerPC, the new Intel-based Mac may not see or be able to use some of the items.
    The older Setup Assistant is supposed to do for Panther 10.3 what the newer Migration
    Assistant does for Tiger 10.4; to an extent. The results from the older system are limited.
    There is a way to have the new computer import some of the older computer's user files
    and account info into it, before its first run; but with a leap so great between 10.3 & 10.6,
    the results overall won't be as satisfactory as just running the new computer totally new;
    going through the setup and upgrade processes independent of the old Mac altogether.
    The Apple Support- Snow Leopard page should have some upgrade and migration help
    info on there which may be helpful: http://www.apple.com/support/snowleopard/
    It would appear that the instructions for migrating from an older Mac to one running 10.5
    or 10.6 apply to the older computer, so the Panther software may be secondary if it really
    matters at all in this process. See this document, and wonder along with me... This is not
    quite the same as a migration assistant; but you don't need FW Target Disk in either case.
    • Mac OS X 10.5, 10.6:
    How to use Migration Assistant to transfer files from another Mac
    http://support.apple.com/kb/HT3322
    The older method may not apply in the path you've chosen, outlined here, below;
    but note there are matters about file and older app compatibility in the newer OS:
    • Mac OS X 10.3, 10.4:
    Transferring data with Setup Assistant - Migration Assistant FAQ
    http://support.apple.com/kb/HT1554
    In the past, I've done a bit of upgrade and some migration action and found that overall,
    the new OS X seemed to work a lot better with nothing old involved. That's just me!
    And I'm sure each individual's mileage may vary...
    Good luck & happy computing!
    { edited for no great reason }

  • Need some advise and help Transferring files one mac to other

    I have created quite a problem for my self and can not seem to get out of it.
    I transferred my system from the G4 to the new Intel IMAC. Ended up with two accounts on the new Intel IMac. Was told to go to user/ and transfer files from one account to the other. Lost all of my files. Can not get the netscape back on with my bookmarks, Safari does not have any of my stored bookmarks, Quicken, Family Reunion are locked. Have done the permission repair. Still messed up.
    To add to this, I than decided to retransfer from G4 to Intel IMAC, but can not establish a target disk using Firewire. Follow the instructions holding T down and the screen comes up saying to reboot or shut down, it will not go to the target mode. And it does not appear that the G4 has a firewire extension now, it did two days ago. Can any one help?

    The Windows drive is probably formatted NTFS which is not natively writable
    by the Mac. It should be formatted as FAT32 to be usable on both.
    Dave

  • Newb here, need help! just check out what i have, make reccomendations please!!

    Windows xp 32-bit,
    4 gigs ram,
    dual sli 7200 nvidia cards,
    60gb internal hardrive, 1.5 terabyte external hard drive (brand new, very empty)
    Recorded 24p and 60i on a Canon XL-2 (miniDV)
    IEEE 1394 firewire connected from pc to uploading device. Unfortunatly i borrowed the xl-2 from school, and am trying to capture from a panasonic pv-gs36 i borrowed from a friend (only friend with a device that records with a miniDV cam).
    I have been working fine on premier, very smooth when i import files, but when i tried to capture, as soon as i hit capture it freezes my whole set up, i have to manually restart my pc. I need to capture and export these clips to quicktime so i can edit in final cut at school (as requested by my instructer) the project is due in exactly one week, and the edit bays are always full which is why i opted for capturing at home with premier cs4.
    Im in panic mode now though, cause of this freeze issue. I'll have access to an xl-2 for the remainder of the week if the panasonic cam is the problem, but if not, please let me know!! ill go out and buy a new graphics card if that really is the issue... but i cant afford the quadro....which is why i opted for adobe premier instead of avid.
    im thinking its freezing because i recorded on an xl-2 and am trying to capture on this panasonic cam... could this be why?
    i installed premier on the 60 gig internal hard drive...should i uninstall it and install it on the external 1.5 tb one? should my settings be a certain way when i start a new project? Please help out a stressed out student during finals week! I will be super grateful to any info anyone can provide. thanks again for all your time and effort =)

    I'm unsure if the external drive is eSATA. I did buy it a few days ago 1.5 tb for 129.99 at fry's...good deal. What are the advantages of having an eSATA? The drive i have is a seagate Free agent-Desk external drive, model number st315005fda2e1-rk
    <img src="http://www.thinkdigit.com/uploads/seagate_freeagent_desk.jpg">
    Again, total noob here...
    the external is USB 2.0, and yea, i only have 1 firewire port. Also, something i failed to  mention is...I actually run my computer off my 42 inch samsung hd tv (720p native). When i was installing the whole production suite it asked me to get a moniter with higher resolution, but the click top continue installing anyway button was there so i went for it. Could this be the problem?
    I'm fairly sure i recorded in standard play with 2 channel audio with the canon, so im starting suspect it is this dinky panasonic dv cam thats causing me all this headache.
    also....please dont insult me too much...but:
    whats a panny?
    Whats scenalyzer?
    annnnd finally, no input on the cards? I was thinking that was going to be the problem for sure. The cards are great for gaming but im not really sure what kind of cards are (at least decent) for editing and capturing.
    I appreciate your help, ive been looking at the boards all night and this morning, i noticed you are kind of a superstar around here Millaard, so i really appreciate the effort =)

  • Getting A Macbook, Need Help Transfering Files

    Ok I'm getting a MacBook for X-Mas (that is if Santa comes through :)) and I want to know the best way to transfer some of my files on my pc to my new MacBook.
    Specificly I'd like to transfer some of the videos in my iTunes library over to my new MB. Are there tutorials here that show you how to do this? I know that I can have the people at my local Apple store do this but I'd like to do it myself, mainly so I can familiarize myself with my new MB.
    If anyone can help me out here I'd really appreciate the help.
    Message was edited by: Kyle Varnell

    Both of these should help you get an idea of what you need to do.
    Mac OS X v10.5: Sharing
    Mac OS X 10.5: Setting up a Mac computer to share files with Windows users

  • Help transferring files

    whats the easiest and fastest way to transferring all my files from one mac thee other?

    ALL MBPs have firewire ports or capability, which will be two times as fast as USB.  To use firewire, you will need a firewire cable. 
    You can employ Migration assistant, Setup assistant or use Target disk mode.
    Here is information on your options:
    http://pondini.org/OSX/Setup.html
    http://support.apple.com/kb/HT4413
    http://support.apple.com/kb/HT1554
    http://support.apple.com/kb/PH10725
    Ciao.

  • Help transferring files from Powerbook to new Vista?

    Hey guys. I'm pulling my hair out here and hope someone can help me. I just got a new HP tower with Vista on it, and all my files are still on my powerbook. I've tried everything to transfer them over, but to no avail. Would appreciate any help. Here's what I've tried:
    1) Netgear hub
    2) Crossover cable directly linking the two computers
    3) Firewire directly linking the two computers, and
    4) I have a lacie external hard drive that I've used for years with the mac. I plug it in to the new computer and it doesn't show up on the list of drives (although it does show up in the device manager...strange).
    Again, desperate for help here. Cant thank you enough.
    75B

    3) Firewire directly linking the two computers, and
    4) I have a lacie external hard drive that I've used
    for years with the mac. I plug it in to the new
    computer and it doesn't show up on the list of drives
    Another option
    MacDrive will allow you to read Mac formatted disks on a Windows PC - don't know if it is Vista compatible though.
    A PowerBook in Firewire Target Disk Mode and/or the drive could then be connected to the HP PC and the PC will be able to read the drive/PB.

  • Needed some help transferring files from Mac to external hard drive

    Hey guys, I just needed some urgent help.
    My friend wanted some files to be transferred to his external hard drive from my Mac. As he is a Windows user, I guess his hard drive is formatted for Windows as well. As I plug in the hard disk in my Mac, I can't transfer the files. It says something like "the disk cannot be modified".
    So, please help me on how can I transfer this files from my Mac and if I do format it to work with the Mac, will it work for Windows later?
    Please help!
    Cheers
    Sam

    The Windows drive is probably formatted NTFS which is not natively writable
    by the Mac. It should be formatted as FAT32 to be usable on both.
    Dave

  • Need help transferring files from my canon vixia hg21 to final cut express!

    I can't seem to get my camera or its files to show up on the FCE log and transfer window. If anyone knows of a way to get this to work i would greatly appreciate it!!!. also, I have already tried converting files to get them to be an agreeable format for FCE but the end result is always low quality.

    HI -
    Log and Transfer only works with HD material, so make sure you shot in the HD mode.
    Also, some times if there are multiple file formats on the same camera storage, like HD clips, SD clips and still images, this can prevent Log and Transfer from working properly. If that is the case, see if you can off load and delete all the non-HD material from the camera storage so that only HD material is there.
    Then:
    Open FCE.
    Open the Log and Transfer window.
    Click on the little gear shaped icon towards the upper middle of the L&T window
    !http://www.spotsbeforeyoureyes.com/L%26TPrefs.jpg!
    Select Preferences from the drop down menu.
    When the preference window opens, set the AVCHD Plug-In audio format to Plain Stereo.
    !http://www.spotsbeforeyoureyes.com/L%26TPrefsToPlainStereo.jpg!
    Close Log and Transfer and close FCE.
    Now connect your camera via USB with the camera on, open FCE and then open Log and Transfer and see if the window populates with clips.
    Hope this helps.
    MtD

  • I am very new to Mac Mini and need help transferring files to thumb drive

    I want to transfer the Mac Mini user guide (manual) to my thumb drive but do not find how to do it.  Help, please!

    The thumb drive is on the desktop.  This is the most embarrassing question I have had to ask in public in a long time, but, how do you drag something.  When I try by holding down my mouse on the file name I want to move it doesn't drag it just gives me several other options.  I left Microsoft for this and I know nothing about Apple computers except for my iPad.

  • A few questions about ACR / windows. Newbie here, please help  :)

    1. How do I "un-do" any edits that I have done in a.c.r.? I made some white balance changes and synched a group of photos but then realized it didnt work for all of them. For the life of me I cant find any way to get rid of the adjustment that is now attached to those images?
    2. Also when I have made some adjustments that I like, I thought that they were suppose to show up on my images? I see the save button on the bottom left of acr but when I do that it actually saves a copy. I dont want it to save a copy, I just wanted my adjustments to be attached to the original (in the sidecar as Ive heard some of you say).
    Any suggestions as to what I need to do. Thank you K

    If you right click on your raw files in Bridge, one of the options will be to "Clear Camera Raw Settings". If you highlight more than one image, you can clear the settings on all of the images at once. Another option is to hold down the Alt key while you are in Camera Raw, and one of the buttons will change to "Reset".
    When you have finished working on a raw image in Camera Raw just click on the Done button. That will return you to where you were previously, and the changes you have made should be visible.

Maybe you are looking for