Hello, can i taken over the entries from an old calendar to a new calendar? example entrie from 2013 to 2015?

hello, can i taken over the entries from an old calendar to a new calendar? example entrie from 2013 to 2015?

Duplicate the calendar, go to the Calendar Settings and change the year to what you want.  Text entries to individual dates will remain but any photos added to a specific date will not.   Photos added to the photo page for each month will remain so you will need to delete them from the page and calendar if you want new ones.

Similar Messages

  • Can you somehow put the music on an old ipod to a new one?

    I want to get a new ipod, but the computers that have the music that is on my ipod are either destroyed or no longer workimg so i can't get to them. Is there a way to get music from one ipod to another?

    You just transfer the backup you made from your old computer to your new computer, then sync the new iPod.  What?  You didn't make a backup?  You should have. 
    In any case, it's usually possible to get most if not all of the data from a broken computer by removing the hard drive and installing it in a USB enclosure, which can be bought for as little as $10.

  • How can I restore an app and its data from an old ipad to a new ipad without restoring from backup?

    When I purachsed and iPad 2 to replace my old iPad I did not want to restore it from backup for obvious reasons.  However, there are apps that have data stored in them that I have lost the data for, what can I do to get the app and data back on the new iPad without losing the data that was already in the app?

    griffaroo wrote:
    When I purachsed and iPad 2 to replace my old iPad I did not want to restore it from backup for obvious reasons. 
    The reasons may be obvious to you, but it makes no sense to me. I would think that you would want all of the content that you had transfered onto your new iPad.
    However, there are apps that have data stored in them that I have lost the data for, what can I do to get the app and data back on the new iPad without losing the data that was already in the app?
    If you lost the data in the apps, you can't get it back unless you restore from a backup - assuming that the backup DID have that data in the apps..
    The only way that you can get the apps PLUS the app data onto the new iPad is to restore the new iPad from a backup of the original iPad and sync the apps back onto the new iPad if necessary.

  • How can I retrieve my picture from my old iPhone to my new iPhone 6

    How can I retrieve my photos from my old iPhone to d new one via iCloud

    Restore from the iCloud backup - assuming that you were backing up to iCloud in the first place. If you weren't using iCloud for backup - then you are out of luck.
    If you were backing up to iCloud - you have to erase all contents on the iPad in Settings>General>Reset>Erase all content and settings - before you can restore from the iCloud backup.
    Read this article before you do anything else
    http://gigaom.com/apple/ios-101-set-up-and-restore-from-icloud-backup/

  • How do I sync all info from my old iphone to a new one

    how do I sync all info from my old iphone to my new one

    iPhone: Transferring information from your current iPhone to a new iPhone

  • I accidentally dropped by old ipod in the garage and drove over it.  So I bought an ipod nano 7th gen. to replace it.  Can I transfer the itunes from my old ipod to my new one?  I only have about 30.

    I accidentally dropped by old ipod in the garage and drove over it.  So I bought an ipod nano 7th gen. to replace it.  Can I transfer the itunes from my old ipod to my new one?  I only have about 30.

    AAll of your iTunes purchases can be re-downloaded again. Log into iTunes Store, select the Purchases tab for Apps, Music, etc.
    if you've been syncing your old iPod with iTunes, you can restore everything to your new iPod from the old backup.

  • Why has iTunes taken over the iPhoto file?  I can not attach pictures to files because I can not find them.  I can not upload pictures to software like Shutterfly for the same reason.

    Why has iTunes taken over the iPhoto function?  I can not attach pictures to files because I can not find them.  This has happened suddenly as if there were some keystrokes that changed the previous pattern. I am not able to upload pictures to programs such as Shutterfly because I can not find them.  When I try to upload, the computer takes me to an iTunes folder.

    How are you uploading?

  • HT4889 Hi. I`ve just started transferring from my old Imac to a new Macbook, using the WIFI. But I realize it will take days to get it done. Can I cancel the process, and start over again using the thunderbolt port? Without causing any trouble?

    Hi. I`ve just started transferring from my old Imac to a new Macbook, using the WIFI. But I realize it will take days to get it done. Can I cancel the process, and start over again using the thunderbolt port? Without causing any trouble?

    See Pondini's Setup New Mac guide for possible answers.

  • Hello, can anyone give us the tips for AirPrint option from iPad to brother MFC 7860DW printer

    Hello, can anyone give us the tips for AirPrint option from iPad to brother MFC 7860DW printer

    It's possible Brother may provide updates to their printers to make them AirPrint capable or provide app for printing; search the iTunes Store or look to the support resources for your model of printer. For other printers, you can route the printing through your computer. If you have a Mac, Printopia might be worth a look:
    http://www.ecamm.com/mac/printopia/
    If you have a Windows system, search the web for something like "airprint Windows hack" and you'll find instructions on enabling printing.
    Another option is an AirPrint-capable print server. Lantronix makes a couple of models, including one that supports a USB printer:
    http://www.lantronix.com/it-management/xprintserver/xprintserver-t2.html
    Regards.

  • I have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac and once the information is transfered how can I print it? Second: I have a large music collection in m

    have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac?  Once the information is transfered how can I print it? Second: I have a large music collection in my old Imac computer how do I transfer this information to my new computer? Also how can I share this information with other computers at home?

    I think you may find helpful information here:
    A Basic Guide for Migrating to Intel-Macs
    The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
    If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate.  Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
    Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
    Classic Environment, and subsequently any Mac OS 9 or earlier applications
    Screensavers written for the PowerPC System Preference add-ons
    All Unsanity Haxies Browser and other plug-ins
    Contextual Menu Items
    Applications which specifically require the PowerPC G5 Kernel extensions
    Java applications with JNI (PowerPC) libraries
    See also What Can Be Translated by Rosetta.
    In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
    If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
    If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
    The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
    Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius  work properly on Intel-Macs with Leopard.  The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.  Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
    Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
    Additional links that will be helpful to new Intel-Mac users:
    Intel In Macs
    Apple Guide to Universal Applications
    MacInTouch List of Compatible Universal Binaries
    MacInTouch List of Rosetta Compatible Applications
    MacUpdate List of Intel-Compatible Software
    Transferring data with Setup Assistant - Migration Assistant FAQ
    Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs.  The initial section below discusses Target Disk Mode.  It is then followed by a section which discusses networking with Macs that lack Firewire.
    If both computers support the use of Firewire then you can use the following instructions:
    1. Repair the hard drive and permissions using Disk Utility.
    2. Backup your data.  This is vitally important in case you make a mistake or there's some other problem.
    3. Connect a Firewire cable between your old Mac and your new Intel Mac.
    4. Startup your old Mac in Transferring files between two computers using FireWire.
    5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
    If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
    1. Set up a local home network: Creating a small Ethernet Network.
    2. If you have a MacBook Air or Late 2008 MacBook see the following:
    MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
    MacBook Air- Migration Tips and Tricks;
    MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
    Copy the following items from your old Mac to the new Mac:
    In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
    In your /Home/Library/ folder:
    /Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
    Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
    /Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
    If you want cookies:
    /Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    For Entourage users:
    Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
    Credit goes to Macjack for this information.
    If you need to transfer data for other applications please ask the vendor or ask in the  Discussions where specific applications store their data.
    5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
    Written by Kappy with additional contributions from a brody.Revised 5/21/2011

  • I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase and start over?

    I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase that mess and start over?

    Hello there, LynnS.
    The following Knowledge Base article and it's referenced link should get you started with the Erase and Install of Mavericks:
    OS X Mavericks: Erase and reinstall OS X
    http://support.apple.com/kb/PH14243
    Once you've gone through those 2 articles, this article should help you with restoring from your Time Machine Backup:
    OS X Mavericks: Recover your entire system
    http://support.apple.com/kb/PH14185
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • How can I do to use my adobe cs3 taken from my old powewrbook to my new Imac?

    How can I do to use my adobe cs3 taken from my old powewrbook to my new Imac?

    Well, sorry to bring you the bad news, but you can stop right there. CS3 is not compatible with OSX 10.8 or 10.9.
    Mylenium

  • I am trying to move my itunes library from my old pc to my new imac, home sharing is on and I can see the shared library.  My problem is that when I check the shared library to import it to my imac I cannot import it.  Can anyone help me?

    I am trying to move my itunes library from my old pc to my new imac, home sharing is on and I can see the shared library.  My problem is that when I check the shared library to import it to my imac I cannot import it.  Can anyone help me?

    You need to transfer the iTunes Library from the most recent backup you made before the hard drive was replaced.
    You can't transfer the full iTunes Library from the iPad back to iTunes.
    There are third-party Windows applications that will transfer data from an iOS device, but they don't re-create the iTunes Library exactly as it was before.

  • Can some please provide instructions on how to import an iPhoto library from an old Mac to a new Mac without getting a bunch of duplicates?  I tried transferring my pictures using an external hard drive and then copying it to the Pictures folder on my Mac

    Can someone please provide instructions on how to import an iPhoto library from an old Mac to a new Mac without getting a bunch of duplicates?  I tried transferring my pictures using an external hard drive and then copying it to the Pictures folder on my new Mac.  I ended up getting a bunch of duplicates. My old Mac has an older version of iPhoto while the new Mac has iPhoto '11.  Is that the cause of the problem?  Please advise.  Thanks.

    Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
    Then launch iPhoto. That's it.
    This moves photos, events, albums, books, keywords, slideshows and everything else.
    Regards
    TD

  • HT5621 I recently changed my apple id email from an old one to a new one and now I can't sign out of my old one on my iPhone 5 because it says I need a password. I cannot give that password because it is part of the old apple ID. How do I change IDs?

    I recently changed my apple id email from an old one to a new one and now I can't sign out of my old one on my iPhone 5 because it says I need a password. I cannot give that password because it is part of the old apple ID. How do I change IDs?

    Hi sharonpalencia, 
    Welcome to the Apple Support Communities!
    I understand it can be very frustrating when you cannot sign in, or sign out in this case, to your Apple ID. In this situation you may need to temporarily edit your Apple ID back to the original email address so that you can sign out. Once signed out, edit the Apple ID back to the new email address and sign in. Please use the attached article for further information. 
    If you're asked for the password to your previous Apple ID when signing out of iCloud
    Change your Apple ID temporarily
    If signing out and back in to iMessage or FaceTime didn't help, try these steps:
    Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
    Tap Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
    Scroll down and tap Sign Out, then tap Sign Out to confirm. If you're using iOS 7 or earlier, tap Delete Account, then tap Delete to confirm.
    Tap Keep on My [Device] or Delete from My [Device]. In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
    Enter the password for your previous Apple ID.
    Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
    Return to Settings > iCloud and sign in with your new Apple ID.
    If you're still asked for your previous Apple ID password, continue to the next step.
    Have a great day, 
    Joe

Maybe you are looking for

  • How do I back up iPhone with iTunes?

    How do I back up iPhone with iTunes? I have the original (1st generation) iPhone.

  • Price error while entering Service Entry sheet.

    >HI All, >the scenario is like this :- >We have enter uncoded services in the Services Tab of item details and have entered qty and gross price alongwith wbs element. There are about 63 lines ltems, while selecting the first only three are getting se

  • Problems with project when switched from Labview 8.2.1 to Labview 10

    Hi everyone, I recently switched from Labview 8.2.1 to Labview 10. Before I can run the project I get the error which you can see in the attachment. (The project is running well in Labview 8.2.1) I did already check if variables end with a space, but

  • Round Trip UML Tool

    Looking for suggestions for a round trip UML tool. Mainly I'm interested in being able to extract UML diagrams from Java source. Ideally, open source, but I'm open to anything if it's really good. So far I've found ArgoUML, but the support for revers

  • Disable rubberband in mobile safari for webapps

    hi I'm building an ios webapp and i somehow can not disable the rubberband/scrolling effect in ios mobile safari. Is there an official fix for that? Something like <meta name="apple-mobile-web-app-rubberband" content="NO"> or maybe in CSS? Here's a D