Hello, Does anyonr know how to "PERMANTLY" disable that annoying caret browsing feature for good.....

It's odd it only keeps popping up (caret browsing) when I use the Google search engine of which I like to use as my primary search enging and does not happen when I use other search engines such as Yahoo, Bing and so on. "I just want to disable it for good". I have tried everything I know, went into the about config page and changed the browsing features to false and it still do not disable it along with other steps to try to permanently disable it and it still comes back. I have Firefox version 33 with Windows 7. ANY help with this annoying feature would be appreciated, Thank you....

Thanks jscher2000, that seems to have solved this annoying problem that only happened when using Google search engine, (checked mark "never show instant results") Now I'll have to look for an add-on (if any) to make sure it never creeps back up on me, Thank YOU again.....

Similar Messages

  • I need to know how to permanently disable that annoying survey popup that appears about every 10 minutes. I've taken the survey twice.

    I've taken the survey twice. If I can't disable it, I will move to another browser.

    Which "survey"?
    If it is a "Feedback" survey from Mozilla, disable the '''Feedback''' extension.

  • Hello does anyone knows how to re-enter the decimals for the tempo cause i only have a full number and can't enter a decimal number ?

    hello does anyone knows how to re-enter the decimals for the tempo cause i only have a full number and can't enter a decimal number ?

    Hi
    Go to Preferences:Display and check that you have:
    HTH
    CCT

  • Hello - Does anyone know how I can color the middle of a two circle Venn Diagram in InDesign CS6?

    Hello - Does anyone know how I can color the middle of a two circle Venn Diagram in InDesign CS6?

    I essentially do what Ellis recommends, although I usually use a somewhat different method:
    Draw two circles
    Copy and paste in place
    Select the topmost circles
    Use Object -> Pathfinder -> Intersect, which creates the green object in Ellis' screenshot
    Then grab the bottom-most circles and use Object -> Pathfinder -> Exclude Overlap
    Lastly, with your Exclude Overlap circles still selected, use Release Compound Paths.
    This has the same effect, but I don't love the anchor-points-and-scissors method myself. Many years ago I taught myself Illustrator with a flaky mouse on an irregular surface; it left me with a pathological hatred of tasks that require fiddly mouse-work. So I have keyboard shortcuts for all of the above, and can select all of the objects without having to very carefully mouse over a path. If you're fast with fiddly mouse-work, Ellis' method will probably work better for you than mine.

  • Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA

    Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA

    This question has already been addressed in this thread:
    Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa?
    John M
    National Instruments

  • Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA

    Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA

    Hello,
    Exactly which USB device are you referring to? Is the device a NI product?
    The Product ID for National Instruments DAQPad-6020E is 0x12C0. The USB vendor ID is 0x3923. This is a 16-bit hexadecimal number(1093) (that is decimal 4243).
    Also, here's a document on our website that will help you in configuring NI-VISA to control your USB device:
    http://zone.ni.com/devzone/conceptd.nsf/webmain/6792BAB18242082786256DD7006B6416?opendocument
    Swapnil P.
    National Instruments Engineer

  • Does anyone know how to get a preflight file signed by apple for the 21 mac

    does anyone know how to get a preflight file signed by apple for the 21 mac

    im trying to get a hold of them to see if they can deauthorize a computer. I am unable to do it because i can't get the internet to hook up. And i got a new laptop that i get the internet on but i can't authorize it unless i deauthorize the other one. i've called apple 3 times and theyve not been very helpful saying i need to get  hold of itunes.

  • Does anyone know how to delete songs that came with the iPhone 6 in the music?? i tried deleting them from iTunes but i couldn't.

    does anyone know how to delete songs that came with the iPhone 6 in the music?? i tried deleting them from iTunes but i couldn't.

    I know you already solved this but for future reference, there is also another setting to only keep songs downloaded to your device visible in music.
    Go to Settings --> Music --> Show All Music and make sure it is turned off

  • Does anyone know how to open a .shs file on Word 2008 for Mac? Any ideas??

    Does anyone know how to open a .shs file on Word 2008 for Mac? Any ideas??

    Ask on the Microsoft Mac forums:  http://answers.microsoft.com/en-us/mac

  • Does anyone know how to put 6 windows in premiere pro cc  for multi cameras,  for 6 cameras actually

    Does anyone know how to put 6 wndows in premiere pro cc for multi cameras, for 6 cameras actually.

    The workflow that Jim spelled out is for doing what's called a "multi-cam edit." This allows you to conveniently switch among different video clips, often from multiple cameras that shot the same performance or event. The end result is a segment where only one clip is visible at a time.
    The way I read your question, what you want to do is show six clips all at once, which is typically referred to "picture in picture." To do that, follow the first 3 steps Jim provided. (By the way, in Step 2, the key is to stack the clips on six different tracks, as opposed to lining them up head-to-tail.) Then select each clip in turn and use the Position and Scale controls in the Effect Controls Panel to shrink it and move it where you want within the frame. Here's a tutorial video on this workflow: http://tv.adobe.com/watch/adobe-beginner-classes-with-dennis-radeke/episode-7-adobe-premie re-pro-picture-in-picture/.

  • I am ready to order my iphoto picture book, but I want to change the binding from wirebound to hardcover.  Does anyone know how I can do that without losing my already assembled photo pages?

    I am ready to order my iphoto picture book, but I want to change the binding from wirebound to hardcover.  Does anyone know how I can do that without losing my already-assembled photo pages?

    Yes - select the book and duplicate it (Command - D) in case of problems - open it and click change theme and select the theme and the new style of binding
    Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
    then order after you have carefully checked the preview
    LN

  • TS2755 My Facetime and imessage are set up to be used by my email address only and I can't add my phone number to either. Does anyone know how to resolve this? I would be grateful for any help.

    I cannot add my phone number to Facetime or imessage. The number is listed but not ticked and is greyed out. Does anyone know how to add the phone number? Thanks for any help.

    Adobe Reader is a FREE program, so you would not enter a credit card
    If you have a subscription to a PAID program, removing your credit card information would cause that program to stop working when you stop paying for your subscription
    If that is what you want, here is the information on how to cancel
    Cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • I have a I phone 4. I recently changed carriers to straight talk it was working fine but I deleted the vpn file on accident. Now I can't get cellular data. Does anyone know how I can reinstall that file or download it somewhere?

    I own a I phone 4. I recently changed my service from AT&T to Straight Talk. It was working fine but then I deleted the vpn file on accident. Now when I try to get on line I get a message that I am not signed up with a cellular data network. Does anyone know how I can retrieve or download the vpn file?

    I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

  • Does anyone know how long the warranties on the Zen Nana Plus' are good f

    Yesterday my Nano Plus stopped powering on and shortly before that the player would just cut off for no reason. I've only had the unit for about 6 or 7 months but I no longer have the sales receipt, does anyone know if I can still return it to Creative for a replacement? Or does the warranty not cover that kind of thing?

    I assume you dont mean Nano Plus, as Nano is iPod... It's a Zen V Plus, probably?Anyway, I believe you should have at least a year's warranty on the player, so if you get in touch with Creative Tech Support they should be able to give you an RMA to send it back and either repair or replace it at no cost. I assume someone from Creative will come on later to confirm, deny or amend this. TH?

  • Hello, Does anybody know HOW to programming TLS negotiation using WINHTTP in Windows 8.1?

    Hello 
    I made a program using WINHTTP . I had a question blow...
    "I tried to wireshark capture network traffic when connecting to that SERVER using 'IE browser'. First
    client_hello message does not include RC4 with TLS ver1.0. But next client_hello message include RC4 with TLS ver1.0.  Because that SERVER only supports RC4 cipher in TLS 1.0(no SSL3.0). I think
    windows 8.1 automatically modify cipher suite. "
    I just had a answer from someone . It is a new function in windows 8.1. It's called "Application protocol
    negotiation" in Windows 8.1. 
    so, I wonder about ... Is it possible to programming disable negotiation function? It means .. I want first
    client_hello message has RC4 cipher. Because when i WINHTTP function, client_hello message does not include RC4 cipher in TLS 1.0. 
    Can i include RC4 cipher in TLS 1.0 using WINHTTP function? or can i programming TLS negotiation using
    WINHTTP? is it possible? or not?
    please hellp me. 

    Hello . 
    Thank you for your answer. It was helpful. But i have some question.
    I added blow source code . But it didn't work. i mean .. TLS_RSA_WITH_RC4_128_SHA and TLS_RSA_WITH_RC4_128_MD5 cipher
    added to the top of the prioritized list. But Client_Hello message didn't include that cipher.
     Only Windows 8.1(testpc) does not work.
    I don't know why...  
    SECURITY_STATUS Status = ERROR_SUCCESS;
    LPWSTR wszCipher = (L"TLS_RSA_WITH_RC4_128_SHA");
    LPWSTR wszCipher2 = (L"TLS_RSA_WITH_RC4_128_MD5");
    Status = BCryptAddContextFunction(
    CRYPT_LOCAL,
    L"SSL",
    NCRYPT_SCHANNEL_INTERFACE,
    wszCipher,
    CRYPT_PRIORITY_TOP);
    Status = BCryptAddContextFunction(
    CRYPT_LOCAL,
    L"SSL",
    NCRYPT_SCHANNEL_INTERFACE,
    wszCipher2,
    CRYPT_PRIORITY_TOP);

Maybe you are looking for