Hello, doesnt work,

Hello, my I phone this morning doesnt work, on the display apear only an Apple and doesn t star anymore, what should i do? thanks

I would connect it to the computer and reflash the os update

Similar Messages

Hello. Having a problem with skype. i am online, all buttons work, however i can not make a video call the button simply doesnt work. Messages works. voice calls works. Please help.

Hello. Having a problem with skype. i am online, all buttons work, however i can not make a video call the button simply doesnt work. Messages works. voice calls works. Please help.

Sounds like you need to contact skype.

Hello! My iMac frozed and I had to switch the electricty supply off and on in order to start again the system, with the problem that the screen looks wierd, I tried to calibrate it... doesnt works any suggestion?

hello! My iMac frozed and I had to switch the electricty supply off and on in order to start again the system, with the problem that the screen looks wierd, I tried to calibrate it... doesnt works any suggestion?

Dear Paul, thank you very much for your time and answer, I followed those steps, somehow it helped the performance of my Imac, is faster now, but the screen issue about the very High contrast colours is still there. Since I am a photographer I am very depending on the screen calibration. I am worried that I came to damage the video card when I shut down the computer from the swicth when It was frozed.

Hello! i am using ipad n i am not able to connect to itunes store.Whenever i open itunes it syas "cannot connect to itunes store".i tried resetting the network settings n also tried changing the dat and time settings as mentioned but it still doesnt work!

hello! i am using ipad n i am not able to connect to itunes store.Whenever i open itunes it syas "cannot connect to itunes store".i tried resetting the network settings n also tried changing the dat and time settings as mentioned but it still doesnt work!please help!

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

Hello, into my ipod there got some water and it doesnt work. Is that possible to repair it in the apple store? Thanks!!!

Hello, into my ipod there got some water and it doesnt work. Is that possible to repair it in the apple store? Thanks!!!

Apple will not repair your iPod, instead they will exchange itfor a refurbished one for a fixed about. The price is listed here:
Apple - Support - iPod - Repair pricing

HT2693 hello, HP LaserJet 400 colorMFP M475dw printers smtp mail client doesnt work. Bad username or password. everything is correct. Any idea?

hello, HP LaserJet 400 colorMFP M475dw printers smtp mail client doesnt work. Bad username or password. everything is correct. Any idea?

Solved, just had to change the hostname order in /etc/hosts (I need to correct this on the arch wiki) :
Before :
127.0.0.1 localhost.localdomain localhost BodyArch-PC
::1 localhost.localdomain localhost BodyArch-PC
After :
127.0.0.1 localhost.localdomain BodyArch-PC localhost
::1 localhost.localdomain BodyArch-PC localhost

Re: i was charging my iphone 3GS yesterday in electricity when once it turned off suddenly while it was in quarter battery. I tried charging it again but it didint open, i tried to plug it into my laptop but itunes didnt recognize it and it doesnt work.

Re: i was charging my iphone 3GS yesterday in electricity when once it turned off suddenly while it was in quarter battery. I tried charging it again but it didint open, i tried to plug it into my laptop but itunes didnt recognize it and it doesnt work.

Hello candymerna,
At this point I would recommeng resetting the device if if will not turn on.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If it does turn on, but will not charge then take a look at this part of the article iPhone: Hardware troubleshooting found http://support.apple.com/kb/ts2802
Power/Battery
Battery does not charge from the USB power adapter
Important: Only original iPhone can be charged from a FireWire-based power source. If iPhone is connected to a computer that's turned off or is in sleep or standby mode, the battery may drain.
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
Also refer to iPhone and iPod touch: Charging the battery.
If it is charging, but not recognized in iTunes take a look at one of these articles depending on your Operating System.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
or
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Cheers,
Sterling

SSO using WEBGUI (through ITS) to backend R/3 doesnt work

Hello All,
We are using NW04 SP14 and trying to achieve SSO through login tickets to backend R/3 System (4.7).
So far I got it right through WIN GUI but through WEB GUI it doesnt work.
We did set ~mysapcomusesso2cookie = 1; ~login and ~password as empty in the global.srvc file on the ITS server.
When I use the WEB GUI, it shows me the ITS Login page asking for Login and password.
I also checked the cookie by using "javascript:document.cookie", this is what i got:
"saplb_*=(J2EE4017100)4017150; PortalAlias=portal; JSESSIONID=(J2EE4017100)ID0757548650DB10548473283783783936End; MYSAPSSO2=AjExMDAgAA5wb3J0YWw6d2RheWFuZIgAE2Jhc2ljYXV0aGVudGljYXRpb24BAAdXREFZQU5EAgADMDAwAwADRU5QBAAMMjAwNjAxMTgxNzQxBQAEAAAACAoAB1dEQVlBTkT%2FAPUwgfIGCSqGSIb3DQEHAqCB5DCB4QIBATELMAkGBSsOAwIaBQAwCwYJKoZIhvcNAQcBMYHBMIG%2BAgEBMBMwDjEMMAoGA1UEAxMDRU5QAgEAMAkGBSsOAwIaBQCgXTAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0wNjAxMTgxNzQxMzZaMCMGCSqGSIb3DQEJBDEWBBQtYG1bqNgV1TVHdWuzdb%2FGA%2BVV4TAJBgcqhkjOOAQDBC8wLQIVANL17BTacNfsQ8TEbLaBIVBvR2EiAhQPfWyw2s8lAX2qVgEq7%2BHrVpsmSw%3D%3D"
This shows that cookie is being generated by Portal.
These are the entries in the global.srvc file:
~appserver server5 (R/3)
~clientcert 1
~cookies 1
~disconnectonclose 1
~dontshowaccessibilityonlogin 1
~ewt_statichelp 1
~exiturl
~hostsecure serverits
~hostunsecure serverits
~language EN
~languages EN
~login
~logingroup
~messageserver
~multiinstanceservices 1
~password
~portsecure 443
~portunsecure 80
~routestring
~runtimemode dm
~systemname DEV
~systemnumber 00
~theme 99
~timeout 15
~urlarchive /scripts/sapawl.dll
~urlimage /sap/its/graphics
~urlmime /sap/its/mimes
~usertimeout 1
~xgateway sapdiag
~xgateways sapxgadm,sapdiag,sapxgwfc,sapxginet,sapextauth
~mysapcomusesso2cookie 1
Can you guyz guide me to get this done ?
Thanks in advance.

I got it. I accessed the portal by using:
http://myportal.companyname.com:50000/irj and it started working. But when i use http://myportal:50000/irj it doesnt work.
So in future do I need to use http://myportal.companyname.com:50000/irj to access the portal?
Can someone tell me the reason why it does it ?

Pattern generation doesnt work - DIOHS96

Hello
I have a trouble getting the DAQmx to do a pattern generation as expected.
the first mode of operation, is when i set the clock configuration to "sample clock": the card should support 2MHz operation, however, above about 2KHz, the card spits out everything BUT the last 16 samples! . the error i get is underbuffer, when i force the task to stop after having waited too long. above 1MHz the output operation dies in the middle, underbuffer error.
to note, i monitor all the time the data written to buffer, and the actual nb of samples generated. i see that i have written a nb of samples, that the memory has filled, that it recovers as the data is spit out, and that suddenly, 16 bits from the end it stops.
the second mode of operation, is by setting the clock configuration to " burst (input)", after the recommendation of Johannes from this same forum (by the way, i still want to understand why first mode of operation doesnt work). then, on most computers installed with same card the system works nicely, and i get 2MHz operation working.
But for one computer: a new HP, which had a bug already not recognising the NI card first, but after the bug fix from knowledgebase it recognised it. it seems this card work using traditional DAQ now on this specific computer.
What happens on this computer is that the "sample clock" configuration works as on any other computer, meaning badly. and the "burst input" mode, doesnt work at all. it spits out only the first 16 samples, then dies. i have to stop the task manually.
so you can check that i make no mistake, i attach my piece of code that does the work.
Hope that i get help fast! thanks
OOPS! this should have gone to hardware board! - disregard!
Message Edited by Gabi1 on 05-10-2007 04:56 AM
... And here's where I keep assorted lengths of wires...

This will get you most of the way there:
       Pattern p = Pattern.compile(".+@[A-Za-z0-9\\-_]+(.com|.net|.edu)$");
       Matcher m = p.matcher(email);
       if (m.find()) { System.out.println("Match - Email Address OK"); }
       else { System.out.println("No Match - Email Address Bad"); }

I book doesnt work with power cord only

Hello. I was just using my ibook g4 and shut it down. When i tried to turn it back on it worked for about 5 minutes then it shut off. I tried taking out the battery and holding down the power button for 5 seconds among other things. I gave up and borrowed a friends battery, he has the same model as me and that battery doesnt work either. I tried just using the power cord only and that doesnt work either. Do i need to take it in to a professional? I've tried just about everything.

Hey Caesar and Welcome to Apple Discussions,
So your header reads:
"i book doesnt work with power cord only "
Is that right? Will it run only on the battery?
If so this is from the manual:
"The computer runs with battery, but not with the power adapter plugged into
wall outlet
1. Try known-good power outlet.
2. Try known-good power adapter and power cord.
Note:
Verify that power adapter connector glows amber or green. If the power
adapter light is green, turn over the computer and press the battery button. The
battery lights should glow green and stay on if the power adapter is operating
correctly.
3. Reset the power manager by pressing the key combination Control-Option-Shiftpower.
Warning: Make sure you do not hold down the "fn" key when resetting the
power manager.
Warning: Resetting the power manager means you will also need to reset the
date and time (using the Date & Time control panel).
4. Replace DC board.
5. Replace logic board."
and it would help to know exactly which iBook you have but this is pretty generic.
Richard

Hp pavillion dv6 password doesnt work,,!!!

... I cant open my hp pavillion dv6 laptop...ive set a password before but i dont know why it doesnt work anymore..when i try to open it always says "the user profile service service failed the log on,user profile cannot be loaded"!!
I dont know what will i do...im afraid to lose all my files..please help.........
tnx in advance for your help...
...pauline
This question was solved.
View Solution.

Hello Pauline05
Thank you for posting on the HP Forums!
I understand that you are experiencing a "the user profile service service failed the log on" error. I apologize for the inconvenience, but I will do my best to assist you! Fortunately, there is a Microsoft document with complete troubleshooting for this issue here: You receive a "The User Profile Service failed the logon” error message
Please try all of these steps and let me know the results. Thanks again for posting and have a great day!
Mario
I worked on behalf of HP.

Bluetooth doesnt work since tiger to leopard.

hello everybody!
i am new at this forum, so i am apologizing, if its the wrong place to post my messenge!
but i got a problem with bluetooth, i cant send anything from my phone to my macbook.. before i had tiger and it worked fine, but now, with leopard it doesnt work.. i can send from my macbook to my phone,(not iphone) but not from phone to mac..
when i search at my phone for bluetooth, i can find my macbook, but when i try to send it says, "you cant connect to this macbook"..
i have tried many of type of phones. SE, NOKIA, SAMSUNG. no one works.
anyone have any idea for this?
i am sry for my bad english!

Try the BlueTooth forum.
 Cheers! DALE

"Save as PDF" doesnt work

Hello I've done a clean install of Snow Leopard and restored my system from Time Machine.
Now the print option "Save as PDF" doesnt work. It doesnt give an error, just nothing happens. What could I do? I've repaired permissions already.

Dig into your preferences folder ( yourUserName/Library/Preferences/) and >look for a plist file with a name such as:
com.apple.print.custompresets.forprinter.EPSONStylusNX200.plist
...where EPSON would be the name of whatever printer you have.
Delete that file and try again.
Already done that, the problem persists :S
Is that option grayed out?
No, its not.
Might it be putting the saved file somewhere you can't find it?
Do the normal options pop up as to where to save it?
No, nothig pop out, when I click the button nothing happens at all

Replace content smart objects doesnt work properly.

Hello fellow Photoshoppers,
Currently i am working on reusable album templates with smart objects. At first i was very enthusiastic but this was soon to end. as the replacing doesnt work properly.
I made the smart object by using:
1. > file
2. > place
then i try to replace the content by using.
1. > layer
2. > smart objects
3. > replace contents
the old image should get replaced by the chosen file and matching size, smart layers etc. However when i perform the same actions my image gets replaced but it is not the same size as the smart object it replaced. This makes the entire template useless as it would take far too much time resizing every single image. inspired by another video I also tried double clicking the layer and tried replacing the image in the editing sceen by dragging another file on top of the smart object. Again, it does not spread out to the full smart object size and i'm stuck with a small image in need of extra work.
Needless to say, very frustrating.
Any thoughts?

Are you sure you understood how it is intended work?
That is an interesting question, i have no experience with photoshop as i bought CS5,5 just a week ago and have no experience with any of the previous versions either. All info regarding how to make such a template i found from various tutorials, i posted one below. When they do it the image get scaled perfectly. Now since they use some smart filters in the tutorial i applied them aswell to see if this would fix the problem but it did not.
http://www.picturesocial.com/video/wedding-photo-album-templates
Are the images you want to switch in at least always of the same width to height-relation?
I checked both files for consistency and discovered they were shot on different camera's. One file ( the origional smart object ) was cropped form a 21,0MP file and the other was croped from a 10,1 MP file. Both images were cropped to a 2x1 ratio. Having discovered the difference in pixel amount i cropped a different 21,0 MP file to 2x1 ratio and checked both files for their exact dimensions (both images are equal in size with 5616 x 2808 pixels) and replaced the content with the newly cropped file which gave a much better result. However, the image was slightly smaller in photoshop leaving a small gap where the origionally placed smart object lined up perfectly. I turned the situation around and placed the 10,1MP cropped image as the smart object and replaced the content by a 21,0 MP cropped image. As to be expected i ended up with a new image much larger then the smart object. So the smart object does not constrain the files to the dimensions set. As it turns out it only scales the replaced content relative to the size of the origional content of the smart object.
I just need a reusable template with objects that:
- cannot be moved once locked ( if possible) but can have its content replaced
- scales the replaced content to the predefined dimensions
- needs no prework like cropping to the same aspect ratio as the smart object content. ( i want to be able to place a landscape sized raw (3x2) on any landscape format (2x1 / 16x9 / 4x3 or whatever) i find it acceptable to having to crop a portret to landscape orientation first before being able to replace a landscape.
now ive been searching for more info and some people say indesign is much faster in making album pages so I am installing the program as we speak hoping this will be the solution.

LMS4.1 OGS doesnt work for Eventconsole/Syslog

Hello,
Device selection doesnt work for Monitoring=>Eventconsole/Syslog, but you can filter with the filter function inside Eventconsole/Syslog
but without the possibility for device filtering. Message-Box "No device found ... " will appear also with selecting "All devices"
Device selection (OGS) works in any other applications - with being extremly slow for nested user defined groups btw - including to generate syslog reports from report generator.
Because Spectrum is used for FM in this network, customer will save resources at the slow GUI responding LMS server and switched DFM off, by deactivation at Admin > System > Device Management Functions.
Is the device selection issue in Monitoring=>Eventconsole/Syslog a known bug and can count with a bugfix in future?
Steffen
P.S.: after switching the GUI to https, the syslog subscription has been stopped due to a cerificate trusting issue. I expect from a prime SW that this should be included in the https mode switching automaticly.

Please try the following steps:
1. Stop the daemon manager (Net stop crmdmgtd).
2. Regenerate the SSL certificate (Dont forget to start you shell/command prompt session as Administrator):
     *Remove server.* files under NMSROOT\MDC\Apache\conf\ssl (take backup of all 4 files before deleting).
     *NMSROOT\bin\perl NMSROOT\MDC\Apache\ConfigSSL.pl -disable
     *NMSROOT\bin\perl NMSROOT\MDC\Apache\ConfigSSL.pl -enable
     *Fill all the details it request for.
     *Ensure that the following files are created under NMSROOT\MDC\Apache\conf\ssl :
server.crt
server.csr
server.key
server.pk8
3. Start the daemon manager (net start crmdmgtd).
4. Try to access the GUI with https://xxxxxx:443.
-Thanks

Hello, doesnt work,

Similar Messages

Maybe you are looking for