Hello everyone! Did you find any problems so far using hotspots?

Hello everyone! Did you find any problems so far using hotspots with iPhone 4?

Just the usual ones in dealing with some routers with buggy firmware and such.
I'm sure there have been many who have had problems, but mine has worked beautifully at a wide variety of hotspots like those at McDonald's, Starbucks and Borders.

Similar Messages

  • Thank you for providing immediate  feedback.   bt that solution did not help me to solve the problem.still am nt able to make outgoing calls. i dont find any problem in recieving calls also right. bt i dont have any problem in recieving calls.

    Thank you for providing immediate  feedback.   bt that solution did not help me to solve the problem.still am nt able to make outgoing calls. i dont find any problem in recieving calls also right. then i dont what is wrong with my iphone.The same sim which i used in iphone4s is working in all other phones.its not the problm of carrier.
    Iphone 4s Black 16gb

    Rather than starting a new thread every time it would be easier to follow you if you stick to the one thread

  • Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. Did you saw this problem?

    Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. What is intresting - in full screen mode everything works fine. Did you saw this problem?

    It seems there's a workaround here:
    https://discussions.apple.com/thread/5566037?tstart=0

  • Error: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Receiver Determination did not find any receivers at all

    Hello,
    I have an issue configuring a simple File Adapter Content Conversion, it will be great to give me some support as I'am new in the PO Environment.
    Iam reading a flat file and trying to write into an XML in the same FTP server
    I have a 1 to 1 Mapping as follows
    And my Content Conversion at Sender side Looks like this
    After running the configuration Iam getting following error message
    Error: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Receiver Determination did not find any receivers at all
    My System is the SAP Netweaver Process Intgration 7.4 single Java stack
    Do you have any idea how to fix this issue?
    Many thanks in advance
    Khadim

    Hi evrybody
    I have enabled the tracing of ICO and have seen that my payload for the message mapping is ok,.
    <ns:hartgeldbest_ERP_KT xmlns:ns="http://xxxxxx.de">
    <Recordset>      
    <header> 
         <gesellschaft>03</gesellschaft> 
         <filiale>000</filiale>
         <satzart>11</satzart>
         <datum>00000000</datum>
         <kennzeichen>1</kennzeichen>
    </header>
    </Recordset>
    </ns:hartgeldbest_ERP_KT>
    The issue is on detrmining the RECEIVER in the Main-XML
    <sap:Main xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:sap="http://sap.com/xi/XI/Message/30" versionMajor="3"versionMinor="1" SOAP:mustUnderstand="1">
    <sap:MessageClass>ApplicationMessage</sap:MessageClass> 
    <sap:ProcessingMode>asynchronous</sap:ProcessingMode>
    <sap:MessageId>ae41678e-da87-11e3-cd0f-0000006831a2</sap:MessageId>
    <sap:TimeSent>2014-05-13T10:16:43Z</sap:TimeSent>
    <sap:Sender> 
    <sap:Party agency="http://sap.com/xi/XI" scheme="XIParty"/> 
    <sap:Service>CC_Hartgeldbest_File2Idoc</sap:Service>
    </sap:Sender>
    <sap:Receiver> 
    <sap:Party agency="" scheme=""/> 
    <sap:Service/>
    </sap:Receiver>
    <sap:Interface namespace="http://xxxxx.de">hartgeldbest_KT_async_out</sap:Interface>
    </sap:Main>
    Is it possible that the receiver is overwritten due to the Content Conversion? Because if I set my Message Protocol to "File" the receiver determination will work.
    Any idea?
    Thx
    Khadim

  • Did you find camera raw 7.2 more responsive?

    hi
    did you find camera raw 7.2 more responsive ?
    i'm talking about sliders and lag
    i run it under w7 32bit photoshop cs6 normal update to 13.0.1
    thanks

    For me it's a little faster than 7.1 to initially show the dialog on an open (by a small fraction of a second), but about the same as 7.0.  It's a bit slower to open an image into Photoshop once the button has been hit, though.
    I haven't seen any difference in the control response - it was interactive with virtually instantaneous response before for me and 7.2 was the same.  An image quality issue, where the new Defringe feature doesn't quite work as well as its predecessor has caused me to drop back to version 7.0, though, and I do enjoy the faster opens.
    I posted a set of instructions for benchmarking your performance at the following link, though there is nothing there about control responsiveness.  You may want to go through that process, and also measure your control responsiveness.  If you can show that your system opens up Camera Raw and does the actual conversions at the same speed as others' systems, yet has vastly slower control response, that could make your point that you have a specific problem.
    http://forums.adobe.com/thread/1076287?tstart=0
    -Noel

  • Setup did not find any hard disk drive in your computer

    I have an old Compaq Presario 7598 Desktop (Windows XP) which I use as a backup machine. Recently when I tried to start it I am getting "Unable to access hard disk,. Operating system not found on any devices". Then when I tried to start with XP Boot Disk (CD), I am getting "Setup did not find any hard disk drive in your computer".
    Can someone help me to resolve this issue?
    Thanks.

    Repeatedly tap the F10 key at boot, you should see information for the hard disk.
    Testing the hard drive:
    http://h20564.www2.hp.com/hpsc/doc/public/display?​docId=emr_na-bph05701#N100A0
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • I don't know who will see this, but i'm writing this here, because i cound't find any problem report places anywhere.

    I don't know who will see this, but i'm writing this here, because i cound't find any problem report places anywhere. Your site are too confusing. I just wanna say that css3 isn't working properly in mozilla. It lags. Other transitions doesn't work at all. Check this site http://css3exp.com/moon/ on your and on chrome browser to see differences. Could you write me a reply to this... question...? [email protected]

    It appears you have accidentally subscribed to a community and were getting e-mails for all related posts. I have removed the subscriptions, so you should be getting no more e-mails. Thank you for bringing this to our attention. I'm sorry you recieved so many e-mails you did not want.

  • Anyone with issues did you find the plastic film?

    If you had heat problems with your MacBook or any odd stuff, did you find the thin clear film over the vents, if so did it fix your problems once removed?
    R

    not with mine and my friend one (white).
    If there is any, then it should be at least help the air flow and circulate better and that is mean lower temp.
    I believe that is a minor accident and not a widespread mistake during assembly line in china. Some casing that still covered with plastic film is passing through their quality control line without being noticed.

  • Hello.. I have one problem. I used automator to automaticly sync my photos to iphoto. Now I don't want it any more. How can I disable it?

    Hello.. I have one problem. I used automator to automaticly sync my photos to iphoto. Now I don't want it any more. How can I disable it?

    If you have iPhoto v9.6.1 then just launch it. Done.
    IF you don't, download it:
    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • I did not find any difference from my iPad 2 and iPad 3?

    I did not find any difference from my iPad 2 and my iPad 3, I am wondering did they sell me the same iPad

    Look at the model number on the back of the box and enter that number into a Google search. That will tell you wich model you have.
    The new iPad comes in a box that simply says iPad on it so you can probably rest assured that you did receive the new iPad, but do the Google search if it makes you feel better.
    Try here as well.
    http://www.everymac.com/ultimate-mac-lookup/
    I stole this from Texas Mac Man .... Sorry Tex!
    Here's the various iPad model numbers and order numbers. The model numbers are on the back of the iPad
    Apple iPad Wi-Fi (Original) 16, 32, 64 GB
    The wi-fi only iPad configurations are assigned model number A1219.
    MB292LL/A is the order number for the 16 GB configuration. The 32 GB configuration is assigned MB293LL/A and the 64 GB configuration is assigned MB294LL/A.
    Apple iPad Wi-Fi/3G/GPS (Original) 16, 32, 64 GB
    The Wi-Fi/3G/A-GPS iPad configurations are assigned model number A1337.
    MC349LL/A is the order number for the 16 GB configuration. The 32 GB configuration is assigned MC496LL/A and the 64 GB configuration is assigned MC497LL/A.
    Apple iPad 2 (Wi-Fi Only) 16, 32, 64 GB
    The wi-fi only iPad 2 configurations are assigned model number A1395.
    MC769LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC770LL/A and the 64 GB configuration in black is assigned MC916LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC979LL/A, MC980LL/A, and MC981LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC954LL/A and MC989LL/A for the black and white 16 GB configurations, respectively.
    Apple iPad 2 (Wi-Fi/GSM/GPS AT&T) 16, 32, 64 GB
    The Wi-Fi/GSM/GPS iPad 2 configurations are assigned model number A1396.
    MC773LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC774LL/A and the 64 GB configuration in black is assigned MC775LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC982LL/A, MC983LL/A, and MC984LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC957LL/A and MC992LL/A for the black and white 16 GB configurations, respectively.
    Apple iPad 2 (Wi-Fi/CDMA/GPS Verizon) 16, 32, 64 GB
    The Wi-Fi/CDMA/GPS iPad 2 configurations are assigned model number A1397.
    MC755LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC763LL/A and the 64 GB configuration in black is assigned MC764LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC985LL/A, MC986LL/A, and MC987LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC755LL/A and MC985LL/A for the black and white 16 GB configurations, respectively.
    Apple iPad 3rd Gen (Wi-Fi Only) 16, 32, 64 GB
    The Wi-Fi Only iPad 3 configurations are assigned model number A1416
    MC705LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MC706LL/A and MC707LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD328LL/A, MD329LL/A, and MD330LL/A, respectively.
    Apple iPad 3rd Gen (Wi-Fi/4G LTE AT&T/GPS) 16, 32, 64 GB
    The Wi-Fi/4G LTE AT&T/GPS iPad 3 configurations are assigned model numberA1430
    MD366LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MD367LL/A and MD368LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD369LL/A, MD370LL/A and MD371LL/A, respectively
    Apple iPad 3rd Gen (Wi-Fi/4G LTE Verizon/GPS) 16, 32, 64 GB
    The Wi-Fi/4G LTE Verizon/GPS iPad 3 configurations are assigned model numberA1403
    MC733LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MC744LL/A and MC756LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD363LL/A, MD364LL/A, and MD365LL/A, respectively.

  • IDoc TO File: Receiver Determination did not find any receivers at all

    Hi,
    We have IDoc to file scenario, where based on attributes present in IDoc we have configured different receivers.
    Everything was working fine and files were getting created based on the receiver determination criteria.
    But there is one change done in custom IDoc to re position the attributes.
    Idoc before changes was having NAME1 and NAME2 above KATR6 and KATR7 and after change it looks like below:
    So there is no change in segment and no change in mapping but the attributes KATR6 and KATR7 are used to determine the receiver.
    Cache refresh is done for both ESR and ID. I have re - entered the receiver determination criteria just to ensure that change should reflect.
    But still when I am triggering outbound IDoc from ECC to PI, the transaction is getting errored out with below error:
    "ErrText": "Processing error = Receiver Determination did not find any receivers at all",
    Can any one providee some idea what could be the reason and what is the right approach to resolve this issue.
    Thanks,
    Vertika

    Hi Krupa,
    I have marked your answer as helpful answer and delete of metadata wasn't required.
    Reload works . But thanks for your suggestion.
    Thanks,
    Vertika

  • HT1918 How easily have you been able to cancel a subsciption payment in iTunes? How easily did you find a description of how to cancel a description? Cheers Phil Tozer

    How easily have you been able to cancel a subsciptioon payment in iTunes? How easily did you find a description of how to cancel a description? Cheers Phil Tozer

    Hi there MyMobileMarketPlace,
    You may find the information about managing subscriptions in the article below helpful.
    Manage your auto-renewing subscriptions
    -Griff W.  

  • Aperture 3: After sending my book for printing to Apple the Apple Store told me that my text and the background have the same color and they couldn't print the book. But I couldn't find any problem in the preview. How could I find the problem pages?

    Aperture 3: After sending my book for printing to Apple the Apple Store told me that my text and the background have the same color and they couldn't print the book. But I couldn't find any problem in the preview. How could I find the pages where the problems are? Or otherwise, why doesn't print Apple the book how it is. Idon't need the text which couldn'be seen.

    The forum is for Logic Pro users.. I will ask the moderators to move it to a more appropriate forum for your question/subject
    Cheers..

  • Setup did not find any hard disks installed in your computer

    OK, I spent about 30 minutes looking for a solution to this and haven't found anything. I'm too lazy to keep looking, and I need to get back to work...
    Setup info:
    -Mac Pro (Early 2008)
    -Dual 3.2Ghz processors
    -32GB RAM
    -RAID Card with four 1TB drives attached (RAID 5 with two volumes: one Mac OS X 10.5.3 and one Mac OS X Server 10.5.3)
    -320GB SATA drive that originally came with the unit in hard drive bay 1, now installed in the 2nd optical drive bay and connected to the 5th internal SATA port. It's partitioned with BootCamp: 32.88GB for Mac OS X 10.5.3 (installed and running, used to create the BootCamp partition) and 264.71GB available for Windows.
    Windows install disc:
    Took my Windows XP SP1 install disc and used nLite to slipstream SP2 and SP3 and burn a new install disc.
    When I boot into the Windows install disc, everything goes fine, until it actually gets to the part where I should be selecting my hard drive (Hit Enter to Install Windows) for installation. Instead , when I hit enter, I get the message that "+Setup did not find any hard disks installed in your computer. blah, blah, blah, hit F3 to restart.+"
    I'm assuming this is a SATA issue and that I need to get a SATA driver slipstreamed into my install disc so that the Windows installer will see the SATA drive.
    Any suggestions on how to proceed?

    Everything I've read says that that won't work because I have the RAID card.
    Sounds like I'm out of luck, if BootCamp can't be installed on a SATA drive not connected to one of the original 4 bays.
    Also, I'm concerned about taking the RAID drives out (I'd have to take all 4 out or it corrupts the RAID setup when I stick the one back in) then putting them back in and having everything return to an All Good status.
    Message was edited by: chadcole26

  • Do you have any problem in KE21N batch programs

    Hi,
    Do you have any problem in KE21N batch programs?
    Thanks.
    deniz.

    No, but look at OSS [Note 897659 - Error KE 093 when running batch input sessions|https://service.sap.com/sap/support/notes/897659] or give more informations.
    Regards

Maybe you are looking for