Hello everyone, I am experiencing an issue running xcode
If anyone could help me i would be very grateful. I am running xcode 3.2.6 on a OS X 10.6.8. I have been playing with codeblocks, and xcode was working just fine but as soon as i turn of my computer off and back on this error message appears..
Xcode cannot be opened because of a
problem.
check with the developer to make sure xcode works
with this version of Mac OS X. You may need to
reinstall the application. Be sure to install any
available updates for the application and Mac OS X.
Click Report to see more detailed information and
send a report to apple.
All though it was working not to long ago. i really don't want to reinstall the application every time i want to use it.
Jade,
What happens if you try to apply some (other) Window>Workspace?
You may try the list (disregarding 5)).
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media, see below. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
External media: It is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky (for a while), but the chances of file corruption and other unpleasantnesses are immensely greater when you use anything but the harddisk, and it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html
Similar Messages
-
When restarting my computer the screen is freezing on the apple and spinning icon. It never finishes booting. Anyone know how to fix this?
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer. -
Hello Everyone,
I have a MacBook older model with me.I am running 10.7.6 on that, I was trying to use BootCamp to install windows on my mac. Since BootCamp can only work on a single Volume, I partitioned my Hard Disk to one volume.
Using BootCamp I installed windows and everything worked fine. After installing windows and testing everything, I switched back to OS X and this time I tried to make another partition on my single portioned Mac volume and named it Backup. That too worked. Now I have three Volumes
1)Development2)Backup3)BootCamp.
Next when I switched to Windows, It should the classic error, No Bootable device found, please insert a Bootable CD and press any key. When I tried to enter my Mac OS X install DVD and by pressing option key, it does not show me the proper Mac OS X development volume. It keeps going back to the No bootable device found message.
Any help will be much appreciated
Regards
Mithunyou can't add a partition in between - you put Windows to a new partition number.
GPT (GUID)
EFI
Mac HFS
Lion Recovery
Windows
And now you have two HFS
One partition and one Windows (plus Lion Recovery).
If you were to have more, it can't be before Windows for one thing. -
My older mac book pro and iMac are both running 10.6.8 and both have started running safari and email VERY slowly. My new mac book pro running 10.9 is having no issues. Is anyone else experiencing these issues?
No noticeable speed differences running the four latest OSs on my machine.
-
Hello everyone. I've got a macbook pro running on mac os x 10.6.8; trying to set up norton antivirus and it requires mac os x 7 or later. How can I safely upgrade to mac os. 7?
leroydouglas is correct, DO NOT install Norton or any other commercial anti virus software. They all work very poorly with Macs. If you insist on AV software, consider Sophos, it is free.
If you do wish to update your OSX, here are the available options:
http://store.apple.com/us/product/D6106Z/A/os-x-lion?find=lion
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
http://www.apple.com/osx/how-to-upgrade/
Ciao. -
Hello everyone, My iphone 5 runs IOS7. It can only rotate when the iphone is already in the sideways, but can not rotate up itself when I turn iphone up. I must tap the assistive touch button to rotate it. This is inconvernient for me.How can I fix?
Took my phone to the Apple store this week and they told me it was a hardware/screen malfunction. They replaced the screen for free since it was under warranty. Now it works fine again!
-
Hello , I ordered the iPhone 6plus 128gb a few minutes before 3am est on Friday morning. I received my conformation email at 530am . As of then every time I try to check order status I receive the following message . We are experiencing system issues, please try again later. Is anyone else receiving this message when checking order status?
Are you seen that message when trying to view your orders from your Verizon account? I have the same issue but if you search your preorder confirmation number and enter you last name here Order Status | Verizon Wireless then it will at least give the vague details like, "your order has been received and is been processed" It will also show the expected delivery date.
-
hello everyone my macbookpro runtime decreased suddenly to about one hour after full charging ,how can i deal with this problem?
you have a one year warranty. You can purchase an extended warranty called "AppleCare" that will make the warranty 3 years, but you need to purchase it before the mac turns one year old. Alsoyou do not need a paper, the serial # determines the age of the mac.
-
Hello Everyone. I have an older version of aperture, aperture 2, that I wanted to install on my MAC. I attempted the installation, and during the install there was a check to see if my computer was capable of installing the software, which it was. After the install completed I tried running the software, and I got a message telling me I can't run this version with my operating system. Does anyone know why I can't run the aperture software, and why I was allowed to install it without some notification.
Hello Everyone. I have an older version of aperture, aperture 2, that I wanted to install on my MAC. I attempted the installation, and during the install there was a check to see if my computer was capable of installing the software, which it was. After the install completed I tried running the software, and I got a message telling me I can't run this version with my operating system. Does anyone know why I can't run the aperture software, and why I was allowed to install it without some notification.
-
hello everyone. I have recently installed a Samsung SSD (solid state hard drive) into my destop PC. For some reason Lightroom does not see it ? So i cannot ingest photos from it, or copy photos from a card to it. It is not listed as a drive option. LR sees every other drive. My computer sees it fine, so i was able to create a catalogue there. Im running windows 8.1. Any ideas ? I will also add that this drive became corrupt and was repaired by Samsung. Maybe they didn't do a very good job.. ..
Yes pretty much that, but to clarify sorry
Opened Lightroom.
Create new catalogue.
This opened the Windows 8 file explorer window and Windows recognises the drive. So I was able to create a catalogue there and save.
I then inserted my memory card into my card reader which LR recognised. I selected it, chose all the photos within and then navigated to the right side of the Lr import dialogue window to locate this problem drive as on this occasion i want the RAW files on the same drive as the lrcat. However all my other drives are listed but not this Samsung SSD.
In addition this Samsung SSD is not listed a drive to import from in the same dialogue window. -
Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS. Animation I was working on that had been performing in browser fine suddenly stopped working, and was not related to any action I had done at that point. Also was working in it today and program stopped responding to key board short cut commands.
I am having a whole slew of odd interface problems with a fresh 2014.1.1 on a fresh macbook pro with latest Yosemite. Program locks up, cursor selections don't show, things disappear. I have a mac mini also and the program runs fine on it. Is there possibly something related to the solid state hard drive in new macs?
-
hello everyone ,i have macbook and macbook pro 15,so my question is can i use magsafe 60v charger to charge my macbook pro which having 85v magsafe but not in working condition.
mangesh171 wrote:
my question is can i use magsafe 60v charger to charge my macbook pro which having 85v magsafe but not in working condition.
No.
Power Adapter/ cord wattage
“Power adapters for Intel-based Apple notebooks are available in 45W, 60W, and 85W varieties. Although you should always use the proper wattage adapter for your Apple notebook, you can use an adapter of a higher wattage without issue.”
http://support.apple.com/kb/HT2346
Best. -
Hello everyone. I just got a 1GB iPod Shuffle,
Hello everyone. I just got a 1GB iPod Shuffle, I really like it, it works great. However I noticed when I pause it, and press to play, it advances to the next song most of the time. Some songs resume play were I left off, but most skip to the next? Any solutions?
Thanks.
AMD Duron Windows XP 1 GhzYeah I also noticed that. I am not sure which song played, but I have been reading other posts and it seems to be a common issue. Not sure if its with just the shuffle or all iPods. Maybe Apple will have a fix.
-
Hello everyone, i want to know how can i found out the purchases made with my credit card (not by my apple ID)?
I found out in my Credit Card bill some purchases in itunes store that wasn't made by me.
thanks to all helpersThis would be something you would need to address with your credit card company. Apple cannot tell you who else might have used your card nor what purchases they might have made. Call your credit card company and report the charges as fraudulent. You'll probably need to have them cancel your existing card and issue you a new one.
Regards. -
hello everyone i have macbook air, hello everyone i have macbook air and my startup disc is full i checked everything and and find out that all space is of OTHER and i dont know what is it and what i have to do with that
First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
If you're using Time Machine to back up a portable Mac, some of the available space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as "Backups." The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.
Maybe you are looking for
-
Wifi keeps scanning and dropping even after connected to home network. Never had this issue until the update, and now my phone runs slow and terrible. Horrible update!! Any ideas on a fix?
-
Newbie: IBM Directory Server LDAP Java Implementation
Good day friends, I'm new in developing LDAP applications. I'm using IBM Directory Server v4.1 & need to develop a application (a web application - JSP/Servlet/EJB). I'm doing this as part of a Web project where i need to store the User Info of the r
-
No Connection to Target Component while configuring Transaction Launcher
Hi All, I was trying to launch a custom BW TCODE from the CRM system using Transaction Launcher. While configuring it, at the step where we mention the Logical system name, BOR Object Type and Method name, I get a message like 'No Connection BW Clien
-
Appraisal Document: Wrong entries in action log
Hi Gurus, For some appraisal documents, the action log is getting wrong entries. For example, it appears several entries. Those entries identify persons that have seen the document. I have an example that several employees have seen the same document
-
After update, I can't access my photos
I am running on OS X Yosemite Version 10.10.3 After running an update on my Mac desktop yesterday, my iPhoto icon was replaced with the Photos icon. When I tried to access my photos, I got a message that said "There is not enough disk space to migrat