Hello guys, i can help you to install netcat on solaris 10. Can you help me
Hello I want to install netcat on solaris, i have tar and gunzip the netcat, and i try to install it one self, but i have problem, because i'm not understan and i'm beginer. Some one help me please
Battery optimization: http://www.apple.com/batteries/iphone.html
Another article: http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain
Similar Messages
-
I seem to have a series of issues which I noticed today with a drop in hard drive memory. I typically hover around 105 GB and for unexplainable reasons dropped to 76 GB.(I'm getting this number from the bottom of a Finder window) I started to do some exploring (ran Disk Inventory (I couldn't make much sense of it), repaired permissions etc.). Nothing jumped out at me. I decided to do a clean install from my Install dvd (leopard) but the disk won't mount. I get stuck on a grey screen w/ an apple but no spinning gear. Eventually, I get a small folder w/ a scolding frowny face and the the disk is spit out.
I did a Safe Boot and restart. Didn't fix the memory issue OR the inability to re-install. I carefully cleaned the Install dvd. No luck.
I reset the pram.
Then, once I was able to get the Install disk to show up on my desk top but when I click "Install" and the computer restarted - back to the grey screen and the frowny folder.
I then took a home movie DVD-R I had created a while back and the computer spits that out also. It does accept an audio CD.
So I guess I have a few issues here....any thoughts on where my memory/hard drive space may have gone? And any thoughts on what's up with not being able to read DVD's? I have a dvd project due on Saturday of this week....UGH.
Thanks in advance.....Karenwhen you saying "install" leopard again.. you booted to the disk and on the screen where it asks you to "select a destination" make sure you click options and then choose from there.
-
Install mysql on Solaris 10 can't found my.cnf file
I install mysql on Solaris 10 , it work fine on both back and connect to Web, recently I met some tuning issue but I can found the my.cnf file, what should I do ?
Thank you,
in case some one need it
go to your mysql installation .. /support-files copy one to your ets, and change in by the need . -
Can't activate after installing iOS5 on iphone 4..PLEASE HELP!
Went to update my iPhone 4 on Thursday, 14th. This is a phone that I have been using without any problems since the release of the iPhone 4. At this point I am using my PC (I have also tried on my Mac), so I download the new iTunes 10.2 or whatever the latest one is, then I download the iOS5 for my phone, then update. Well, it gave me an error half way through and said that I needed to restore. That fine cause I just backed eveything up, so I hit restore and everything seems fine until it trys to activate. Here's what come on the iPhone screen:
Welcome Screen
Select a language - english
Country or region - US
Location Services - Enable Location Services
Wifi Networks
Activation your iphone (it may take up to 3 minutes to activate your iPhone)
Activation Error - Activation request could not be completed. If problems persists, please contact customer care.
In iTunes it has a similiar error that says: "We're sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care."
I called Apple that night and talked to someone for about 2 hours and tried everything he knew to try and fix the error with no resolution in the end. He ended up transfering me to his supervisor and I talked to him for about 30 minutes until he said he would have to talk to someone else the following day and call me back. He did call me back the next day, but only to tell me that they were already working on it and it should be resolved by Saturday night. He told me to keep restoring it every 2-3 hours and eventually it will finish activating.
Well needless to say, it still still wasn't working by Sunday, so I called them back and talked to another supervisor and he said there was nothing he could do and that I just have to keep trying because they are already working on it. That guy was kinda rude so I just decided I would call back Monday and get someone else.
Well, on Monday I called AGAIN, and get a supervisor who said he was aware of the problem, but that it should have been fixed the middle of the previous week. He said he would e-mail the person who was working with the problem and see what else I should do. He also said he would be calling me back today (now Tuesday, 18th) after I get off work and tell me what that guy says.
I have tried all these things on both my PC and Mac: restarting the computer, restarting itunes, restarting the iPhone, restoring the phone (like 100 times), reauthorizing the computer, restarting my internet (but it works fine for everything else), taking the SIM card in and out, connecting my phone to the internet and try activating without the computer, and calling AT&T (not a problem on their side).
I don't have an apple store anywhere close or I would just go there. I am getting so tired of dealing with this crap, and not having a phone (this is day 5 with a brick for a phone). I am just wondering if ANYONE can help me at all!! I am desperate and will try anything, PLEASE HELP ME!!!has anyone solve this problem? i upgraded my iphone 4 to 5.1.1 and now i can see only ""We're sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care."
i tried mani sim card, laptops, wifi. but for 7 days the problem is still exist....
Please help me!!! -
If you cannot install or run iTunes 7.5, you may try this
1. If the installer complains that it cannot find itunes.msi or cannot remove previous iTunes or Quicktime, try exit any running iTunes or Quicktime application, remove all iTunes and Quicktime (including Apple mobile device) installation registry entries (and other corrupted installations) with Windows Installer cleanup utility (http://support.microsoft.com/kb/290301) and manually remove c:\program files\itunes, c:\progrom files\quicktime (and c:\program files\common files\apple if it exists) folder (the exact path may differ depends on where you install Windows on), then run the iTunes 7.5 installer again.
2. If iTunes 7.5 crash on opening and Quicktime player also crash or malfunction, this is the problem of the included Quicktime 7.3. remove it in Add/Remove Programs (XP/2003) or Programs and Features (Vista) and try download and install an older Quicktime (7.2 (http://www.apple.com/support/downloads/quicktime72forwindows.html) , or 7.1.6 (http://www.apple.com/support/downloads/quicktime716forwindows.html) if you use incompatible driver of nVidia 7/8 series display card and/or some RAID configuations).
3. If you still have problems try set Quicktime to safe mode (open Control Panel\Quicktime, select Advanced and select Safe Mode (GDI).)
somebody reported that iTunes 7.5's CD-ROM related features cause BSOD on some systems. Currently no way can fix this.It's bundled with 10.5.3 and newer and can't be installed separately on those OSes.
(59310) -
Any one can help how to install sharepoin2013 in multi servers .if you have any guide please provide
I am sharing few links which can be helpful for you to understand and install/configure multi server sharepoint environment.
Install SharePoint 2013 across multiple servers for a three-tier farm
Test Lab Guide: Configure SharePoint Server 2013 in a three-tier farm
Install and Configure SharePoint farm (3 -tier)
Office Web Apps 2013 multi servers (NLB) Installation and Deployment for SharePoint
2013 step by step guide
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer. -
Indesign CC cannot place any jpg format in my Drive E (psd is OK, jpg in Drive C is OK) while Indesign 6 can. 2 programs installed in the same C drive.
You will most likely get better help in InDesign
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll -
Since installing the latest update I can no longer get on my wifi network
Help! Since installing the latest update I can no longer access wifi.
Yes, see:
https://discussions.apple.com/thread/6224241?tstart=0
10.9.3 kills third monitor: Apple Support Communities -
Hello Guys, what would happen if I reset my iPhone5 - reset all settings
Hello Guys, what would happen if I reset my iPhone5 - reset all settings
If you select the option to reset settings, all settings will be back to default ones, but you will not lose any application, song, movie, etc.
If you select the option to reset all content and settings, your device will be wiped and it will be back to default settings, so you will need to set it up and transfer all your content to your phone -
I can't install my Adobe Creative Cloud is wrote filed to initialize... what can i do to install it?
Hi alinatacu,
If you are trying to install the software using the Disc then I would advised you to please copy the contents on your Computer and then try to install it. Also efore you start the installation please rename OOBE folder to OOBE.old from this location.
Windows:
C:\Program Files (x86)\Common Files\Adobe
Mac:
/Library/Application Support/Adobe
Regards,
Abhijit -
: I have recently purchased a iBook G4 Mac OS X VERSION 10.5.6 and I cannot install any apps such as firefox, adobe reader, it reads you cannot install this file on this disk
Are you saying the iBook G4 you have is running OS X 10.5.6?
The next file to get for it would be the Combo update 10.5.8 for Leopard.
And any old archived Flash player for 10.5.8 from Adobe flash site.
A browser such as TenFourFox, iCab, SeaMonkey-PPC, these are OK
but you won't be able to go past Leopard 10.5(.8) in a PowerPC Mac.
All these are free bits, however anything past 10.5.8 Mac OS X
would require a newer Mac with Intel-based architecture. Macs
made in 2006+ can see later OS X versions.
Good luck & happy computing! -
Help for downloading/installing PSE13 with window 8.1?
I get this message after intall attempts ..."Installer has detected that a machine restart may be pending. Its recommended that you quit the installer, restart your machine and try installing again," Lightroom, however, installed fine.
Thank you for responding. I got some advice from a Microsoft forum....it worked. Thanks again.
From: Pat Willener <[email protected]>
To: kathryn kramar <[email protected]>
Sent: Saturday, January 3, 2015 10:56 PM
Subject: help for downloading/installing PSE13 with window 8.1?
help for downloading/installing PSE13 with window 8.1?
created by Pat Willener in Downloading, Installing, Setting Up - View the full discussion
pwillener wrote: What is your operating system?
Sorry, you specified Windows 8.1 in the subject line. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7063274#7063274 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7063274#7063274 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
Help me with installing This video card.
I really need help installing this card.. Everytime I go through installation it says
"The software that you are installing for this hardware:
MSI Radeon 9800 PRO Plus
has not passed Windows Logo testing to verify its compatibility with Windows XP. (Tell me why this is important)
Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for the software that has passed Windows Logo testing.
Options: Continue anyway or Stop installation"
I click continue then this is what I get..
"Setup was unable to complete the installation.
Try to setup your display adapter with a standard VGA driver before running setup."
Please, Please, Please help me..Is this card an upgrade from something else? If so, you should uninstall the old drivers from the "add/remove programs" control panel, reboot with the new card plugged in, then hit "cancel" when prompted by Windows for drivers. Then run the driver installation program.
As for the "windows logo" question, Windows XP likes to ask for digitally signed drivers as proof that they meet certain criteria set by Microsoft. It's not usually a big deal.
If you're installing the drivers from your CD, you may want to grab the latest Catalyst drivers from ATI instead http://www.ati.com/support/driver.html -
Error installing KDE in Solaris 9!
Hello All:
I got anerror trying to install KDE in solaris 9 using this command:
pkg-get -i kde_gcc
It stars to install via internet, everything is ok, when it reach the koffice_addons packet, it says:
Analysing special files...
1109 blocks
pkgadd: ERROR: attempt to process datastream failed
-bad format in datastream table-of-contents
pkgadd: ERROR: could not process datastream from </var/pkg-get/downloads/koffice_addons-1.3-SunOS5.8-all-CSW.pkg.gz>
ERROR: could not add CSWkofficeaddons.
ERROR: install of CSWkofficeaddons failed
ERROR: could not install required dependancies for CSWkdegcc
Could it be a packet error? I tried downloading the packet in different urls and it says always the same, error, I also tried to install the packet by myself with pkgadd but it gives me the same error, can you help me with this???
Thank you all!Can you try with jreLoc parameter -
./runInstaller -jreLoc <path of JRE 1.6>
You may refer -
SOA Suite Installation
Regards,
Anuj -
hi
can any one help me to install nagios on solaris 10.But i got a document from
www.totkat.org/pages/nagios.shtml. but it is giving errors.
i am expecting your valuable hints to doI've insaller SUNWlibm and the make is going further now but still ends in a fatal error:
then mv -f ".deps/pst3-pst3.Tpo" ".deps/pst3-pst3.Po"; else rm -f ".deps/pst3-pst3.Tpo"; exit 1; fi
pst3.c:1: sorry, unimplemented: 64-bit mode not compiled in
*** Error code 1
make: Fatal error: Command failed for target `pst3-pst3.o'
Current working directory /usr/share/src/nagios-plugins-1.4.13/plugins-root
*** Error code 1
The following command caused the error:
failcom='exit 1'; \
for f in x $MAKEFLAGS; do \
case $f in \
*=* | --[!k]*);; \
k) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo all-recursive | sed s/-recursive//`; \
list='gl lib plugins plugins-scripts plugins-root po'; for subdir in $list; do \
echo "Making $target in $subdir"; \
if test "$subdir" = "."; then \
dot_seen=yes; \
local_target="$target-am"; \
else \
local_target="$target"; \
fi; \
(cd $subdir && make $local_target) \
|| eval $failcom; \
done; \
if test "$dot_seen" = "no"; then \
make "$target-am" || exit 1; \
fi; test -z "$fail"
make: Fatal error: Command failed for target `all-recursive'
Current working directory /usr/share/src/nagios-plugins-1.4.13
*** Error code 1
make: Fatal error: Command failed for target `all'
another suggestion? the SUNWlibm was necessary so thank you for that.
Maybe you are looking for
-
I have 20,00 images in my iphoto they have all been merged into one event. How do I restore them to the original events and dates?
-
Hi...I have an HP G72 laptop running windows7 64 bit and an HP deskjet4500 all in one printer with with a Belkin wireless G home network . The wireless printing has been working fine for months and it STILL works from a different laptop. I am able to
-
Copy pictures from my iMac to my ipad
How do I copy pictures from iphoto to my ipad. I do NOT want to sync, only copy certain pictures from various events to my ipad.
-
Paying a vendor with Credit Card instead of check and specifying so in Orac
Hello, We are going to start paying some of our vendors in Accounts Payable via American Express credit card instead of generating a check. What is the best way to reflect this in Oracle? Now, we pay via check and it is specified in the AP records. I
-
How urgent:how can we know the size of a record from result set
hi proffesionals i attend on problum with arrangment,for that what i am doing is i am fetching datas from database and printing in a row vertically.it is not looking good.i want to print it horizontaly like ae00023 as3333 a6556 a457864 a6576 ae00025