Hello guys i m getting problem in date picker css in new version(21.0) firefox month & year drop down not working but its working when I close the dialog box
when I m opning datepicker (by jquery 1.7.3 min.js) it will work on normal UI but it's dropdown not working in dialog UI after I closed the dialog the datepicker dropdown works
and also it works in older version of firefox like 15.0
Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
<b> To Enable SafeMode </b>
*You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
*''Once you get the pop-up, just select "'Start in Safe Mode"''
If it works in Safe Mode and in normal mode with all extensions (Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: "Firefox > Quit Firefox"; Linux: "Firefox/File > Quit")
* https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Similar Messages
-
My new macbook pro 13" just died and i can not turn it on. When i connect the power cort it also does nor charge. No light is commong on. I was working on battery power when it died and the battery was fully charged. What is the problem?
Take it back to the Apple Store for repair since it's still in warranty.
-
I receive the message: The file "iTunes library.itl"cannot be read because it was created by a newer version of itunes. I do not know exactly what this means. I have Windows 7 on my computer and was able access itunes until just recently. I have tried uninstalling and reinstalling itunes multiple times and that does not work. Sometimes I can get in when immediately after installing, but then if I close it, i cannot get back in. Now, i can't get in at all.
That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
Could you help me?
Thanks for the answer Sumit Singh,
sorry but my problem keeps.
I create a simple text area and then trasform it in interactive text area, set it, apply my paragraph/character style and at the end export it in PDF (interactive).
I open the file with Adobe Acrobat, but when I customize it, words inside text area have stylized with default paragraph/character style.
How could I keep my style on export interactive text area?
Thanks a lot. -
Hello Guys.
I had problems in the Computer before and changed my HD. I saved in my all files documents in (Time Capsule). How can I put all my files, pictures documents on my new HD?
Please Help.
Thank You
Julio SkovHey
Thank you very much for replay.
Would you explain to me how can I do?
I don't really understand these processes.
Thak you very much
Julio -
Hello guys I have a question,or rather a problem. how can I detach yourself iPhone operator Verizon USA? I mean as to call and what to say? I live in Ukraine, and the opportunity came up for to buy cheap 4S 16GB. but on Verizon. when I insert the original SIM card Verizon and I try to activate, says: (error occurred activation, if this problem happen again please call at +1................). this is the hour to use it through the R-SIM 9 pro. everything works нормальнои calls and Internet and SMS, but I want to officially unlock. beforehand thank you
Well, you managed to find this support forum didn't you and you have an internet connection don't you? Then if you have all these things, go and find the number by going to the Verizon website and it should not be hard to find the number.
As for speaking English, this is not really our problem and it is surely something that you should have thought about before buying the phone in the first place.
You also need to know that Verizon in the US is a cdma operator and if you purchased an iPhone 4s, then it should not be locked. The Verizon 4s comes with a sim card tray that should be unlocked out of the box for use internatinoally on gsm networks, so all you should need to do is open the sim card tray and insert a sim card and you should pick up the local gsm network.
A cdma phone does not actually use a sim card, so there would be no original sim card with the phone because when it is used in the US it will pick up the Verizon cdma network without a sim card. The sim card is only for use on a gsm network which will not work in the US, but is designed to work outside the US. Open the sim card tray and insert your own local sim card and the phone should work and should not be locked.
Other than this, if you purchased the phone in the first place, it is the responsibility of the previous owner to cancel the Verizon contract. This is nothing to do with you, so contact the seller and ask them.
Other wise, go to the Verizon website and look up the number and call them. As they are the phone company, ultimately, they are the only ones who can help you. -
hello guys i face a problem when i upgrade from iOS 4.2.1 to iOS 5.1.1 on ipad 3 .when i upgrade i don' t found the camera app from the built in apps.when i try to install from the app store i don't found the correct camera app .please help me .please give any suitable link where i find the correct camera app
It's a built-in app, so it can't be deleted nor downloaded from the store. If you can't find it on any of your homescreens or app folders, and you can't find it via the spotlight search screen (swipe your first home screen to the right), then is it hidden by Settings > General > Restrictions > Camera being set 'off' ?
If not then have you tried a reset to see if you can find it after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Hello guy, i have a problem when playing the FL commando which when i am playing the game , sudden the game is log out by itself. I would like to know what is the problem for my ipod 4g, just buy recently only and having ios 5.0.1
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I want to sync tasks in Outlook with my iPhone. I have tried Toodledo (not good) and Todo. Todo works, but it cuts off most of the text. I only get the beginning of my (long) lists. Any ideas how I can solve this problem? I starting to regret that I switched to iPhone...
Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
Memory can be tested with memory diagnostics programs like Memtest+
Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
If the motherboard has no response then do the basics first:
Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory. -
The WiFi button is gray and will not turn on WiFi. When I push the Bluetooth on button, all I get is the spinning gear. It does not go on. What is the problem? Is there a fix?
After trying resets and a full restore, I went to Apple Store. Genius kept me waiting 1/2 hour beyond app'tment time, then had to go through all sorts of tests before concluding the problem was what you said. They replaced the phone. Thanks.
-
Hello! I have a problem with a credit card. I bought one program, after that i wanted buy one more, but it wrote that with my card something wrong. After that i wanted change my card (VISA) on "NONE". But there no NONE! I can't download FREE apps! Than I wanted make new account and select NONE, but there no NONE, there only cards. Help, please!
Hey Shamannnig!
Here is an article that can explain a little more about this situation:
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/ts5366
Thanks for using the Apple Support Communities!
Cheers,
Braden -
I have an iPhone 5 32GB that is less than a year old, I smashed the screen not long ago and had it replaced and now the backlight works but there is no image on the screen. Its fully working apart from the screen, can I get a replacement? Or how else would anyone suggest to fix the problem?
Make an appointment at the genius bar of your local Apple store or contact AppleCare. Some Apple Stores in the US can replace the display in an iPhone 5 for $149. If it requires more than that, a replacement phone will cost you $229.
-
Populate a drop down list with data from Excel and fill in a text field, based on drop down selectio
Hi!
I have a problem with a PDF form: There's a drop down list that I populate with Excel data that I've put in an XML file through an XSD file -- no problem here. The drop down list has a data binding to the XML file, so that a choice in the drop down list can be associated with an object in the XML file. So, when I make a choice in the drop down list, a corresponding object value is fetched from the XML file and put in a text field on the form.
How to do this is described by Stefan Cameron here:
http://forms.stefcameron.com/2006/07/29/dynamic-properties/
There's a snag, though, and to describe it more clearly:
The XML file contains three types of objects: role, role number, and role cost center. Of these I use the first and the third, i.e. the role and the role cost center. The drop down list contains the roles, and when I select a role, the corresponding cost center is filled out in the text field. So far, so good!
But -- if the cost center has the same value for two or more roles, all of these roles "bounce back" into the drop down list, that is, they are all selected in the drop down list. How many of these you can see depend on the height of the drop down list -- if it's low you'll only see the first one.
If I modify Stefan Cameron's data in his example I get the same behavior, so the problem seems to have to do with how XML data are fetched.
I'm sure there's a workaround, but I can't find it! I've spent many hours browsing the web without finding anyone with a similar problem.
Any suggestions appreciated!Although your issue is far beyond mine, I was hoping you can help me out.....
I need to create a drop down list of names which I wish to somehow link to an Excel spreadsheet.
Please let me know the steps I need to do. I've tried several things, but nothing seems to work and I'm not sure what I am doing wrong.
Thank you -
my computer crashed so i had to reformat, but the only problem is i lost my old itunes account, had to download new version. Now i have an ipod full of music but how can i place all my music I have on the ipod into my new itunes account??
Not if you first do a sync and have iTunes make a backup. However, if your only copy of the iTunes data is in the Touch, then you need to first copy the data to a new iTunes Library using third-party software such as Phone To Mac.
-
My iphone 5 does not turn on anymore. when i plug the charger in the apple icon turns on and off but the home screen never shows up.what do i do to fix it? how can i get my info back?
from the information you provided i can't tell if it is a hardware problem or a software problem. I do have an idea though, try to press your home button and lock button at the same time.
Maybe you are looking for
-
I don't have any details other than what I have explained in the question. Have always been able to download Adobe files in the past. Tried Windows Explorer and it worked. Don't like Windows Explorer.
-
Find in the filename of the jsp page that is included
i have a main.jsp that includes a menu.jsp page dynamically : if (request.getParameter("view")!=null){ include_h_menu_page = request.getParameter("view); <jsp:include page="<%= include_h_menu_page%>"/> now i am in the menu.jsp and here
-
Can't Send Attachments Using Exchange Account
For some reason I can't send attachments using my Exchange account on my iPhone. Pictures, Word docs, Excel Docs, doesn't matter. They just get stuck in my out box and I get the following message, "Cannot Send Mail - An error occurred while deliverin
-
Info for requesting geo-tagging for Canon Powershot cameras.
I currently have a Canon powershot which I love, but was hoping to upgrade to a newer model that supported geo-tagging.. I just called Canon customer service and asked if there were any current or future models that would be including this feature..
-
Using address book to share mobile me gallery
Have new ilife and do not know if i can use address book to share my mobileme gallery! Help