Hello guys my i phone touch is not working on edges and some touch problem and it is not taking too much time too respond it is purshecd in kuwait can i get replace in india

hello guys my i phone touch is not working on edges and some touch problem and it is not taking too much time too respond it is purshecd in kuwait can i get replace in india it is i phone 4s

saikumar3 wrote:
...it is purshecd in kuwait can i get replace in india it is i phone 4s
No, warranty is not International and is only valid in country of purchase.

Similar Messages

  • I have windows 7. Firefox seemed to download ok but will not work. error message " firefox had a problem and crashed." It's a message from a "crash reporter" and gives me an option to send a crash report which I tried but it doesn't seem to send the messa

    I have windows 7. A new gateway laptop. Firefox seemed to download normally; however it will not start. I get a crash report if I try to open the browser.It never opened properly. I have uninstalled. reinstalled. rebooted. How do I get mozilla firefox on this laptop?
    == This happened ==
    Every time Firefox opened
    == After I downlaoded firefox ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

    See http://kb.mozillazine.org/Firefox_crashes and [[Firefox crashes]]

  • Exists clause in query causes too much time to get back results

    We Are having the long query as follows which is taking so much time to respond.Is there any way to optimize the query.We see that there is exists clause in query which is taking long time .if it is so please suggest appropriate solution to remove exists clause.
    SELECT
    DISTINCT t0.JDOID,
    t0.JDOCLASS,
    t0.JDOVERSION,
    t0.ACTIVITY,
    t0.ADMINSTATE,
    t0.CREATEDDATE,
    t0.CREATEDUSER,
    t0.DESCRIPTION,
    t0.ENDDATE,
    t0.ID,
    t0.LASTMODIFIEDDATE,
    t0.LASTMODIFIEDUSER,
    t0.NAME,
    t0.NOSPEC,
    t0.OBJECTSTATE,
    t0.OWNER,
    t0.PARTITION,
    t0.PERMISSIONS,
    t0.SPECIFICATION,
    t0.STARTDATE
    FROM
    SERVINV.RESOURCESPECIFICATION t2,
    SERVINV.SPECIFICATION t3,
    SERVINV.TELEPHONENUMBER t0,
    SERVINV.TELEPHONENUMBERSPECIFICATION t1,
    SERVINV.TN_CHAR t4
    WHERE
    t3.NAME = 'usTelephoneNumber'
    AND
    t0.ID LIKE '0010210%'
    OR t0.ID LIKE '0010370%'
    OR t0.ID LIKE '0010690%'
    OR t0.ID LIKE '0010090%'
    OR t0.ID LIKE '0010610%'
    OR t0.ID LIKE '0010570%'
    OR t0.ID LIKE '0010330%'
    OR t0.ID LIKE '0010130%'
    OR t0.ID LIKE '0010410%'
    OR t0.ID LIKE '0010650%'
    OR t0.ID LIKE '0010730%'
    OR t0.ID LIKE '0010050%'
    OR t0.ID LIKE '0010450%'
    OR t0.ID LIKE '0010490%'
    OR t0.ID LIKE '0010530%'
    OR t0.ID LIKE '0010170%'
    OR t0.ID LIKE '0010290%'
    OR t0.ID LIKE '0010030%'
    OR t0.ID LIKE '0010250%'
    OR t0.ID LIKE '0010770%'
    AND t4.NAME = 'tnType'
    AND t4.VALUE = 'OWNED'
    AND NOT EXISTS (
    SELECT
    t5.JDOID
    FROM
    SERVINV.TNCONSUMER t5
    WHERE
    t5.TELEPHONENUMBER = t0.JDOID
    AND
    t5.ADMINSTATE IS
    NULL
    OR t5.ADMINSTATE <> 'UNASSIGNED'
    AND
    t0.OBJECTSTATE = 'ACTIVE'
    OR t0.OBJECTSTATE = 'INACTIVE'
    OR t0.OBJECTSTATE IS
    NULL
    AND t0.JDOCLASS = 'com.metasolv.impl.entity.TelephoneNumberDAO'
    AND t0.SPECIFICATION = t1.JDOID
    AND t0.JDOID = t4.TELEPHONENUMBER
    AND t1.JDOID = t2.JDOID
    AND t2.JDOID = t3.JDOID
    ORDER BY
    t0.ID ASC;
    Unable to post xplain plan as it is huge and exceeding 30000 characters.
    Pandu

    Hi Pandu,
    try something like this and check if it works:
    replace the OR conditions with substr function:
    AND substr(t0.ID,1,7) in
    ('0010210',
    '0010370',
    '0010690',
    '0010090',
    '0010610',
    '0010570',
    '0010330',
    '0010130',
    '0010410',
    '0010650',
    '0010730',
    '0010050',
    '0010450',
    '0010490',
    '0010530',
    '0010170',
    '0010290',
    '0010030',
    '0010250',
    '0010770')confirm if this reduces the time...will check further after your confirmation...
    Regards
    Imran

  • I bought a new IPHONE from apple reseller and the earpiece is not working . There is no sound .Speaker and headfone are working but earpiece is not working . How can i get it replaced.

    I bought a new IPHONE from apple reseller and the earpiece is not working.
    There is no sound .Speaker and headfone are working but earpiece is not working.
    How can i get it replaced.

    You can get service information on this web page.
    Regards.

  • My Ipod touch 4th generation is not working, its frozen, ive tried everything and its not working, its just frozen on an app and i really really need HELP!!!

    My Ipod is frozen!!! Its a 4th generation and its frozen on an app, Ive tried everything like holding down the lock screen and stuff and its not showing the red thing to slid to shut it down....This is my only thing to use to contact my friends and its not working, i dont have a phone and i cant get one, so this is the onlything i have.....PLEASE HELP!!!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Hi, My I-phone taking too much time to get charge

    Hi, My I-phone taking too much time to get charge... I am charging through computer. It does not show whether its charging or not. Morning it was 40% , till now it 60 % after that it never moved...I have switched off my mobile and charging but percentage has moved to only 60%... I am charging from morning 9:00...its 1:30 still 60%....Please help

    If you have the original battery in your iPhone 3G, it may have reached the end of it's useful life. You can contact Apple about a replacement battery. It may also be that the USB port on your computer doesn't put out enough power. Try charging the phone from a wall outlet.

  • I have bought a iphone from thailand how can i get service in india

    I just put a charger into a plug and it was spark after all this my phone was still in working but not charging now how can i get service in india. actually i buy this iphone from thailand in August 2013  please help me
    Regards
    Gurmeet
    <Personal Information Edited by Host>

    You can't.  The warranty on the iPhone has NEVER been international.  You will need to bring the phone to Thailand (or send it to someone you know there to bring it to Apple) for servicing.

  • Hi i had my ipad mini on the windowsill and the touch screen is not working or the button on the screen and the screen is coming away is there anything i can do

    hi i had my ipad mini on the windowsill and the touch screen is not working or the button on the screen and the screen is coming away is there anything i can do will apple take it back

    pvonk wrote:
    Apple does not replace or take back devices that are damaged.
    Depends on the damage. The battery came loose in my iPhone. When Apple opened the phone to redo the glue they discovered the speakers were also loose. Apple replaced the phone.
    If the glue was properly bonded or had some other flaw Apple will replace the device if the device is still under warranty.

  • TS4006 we have lost an ipod touch over xmas, ive tried find my phone but it wont work as its run out of batterey and is off line . is there anything else i can do?

    we have lost an ipod touch over xmas, ive tried find my phone but it wont work as its run out of batterey and is off line . is there anything else i can do?

    Not really
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                                        
    Reporting a lost or stolen Apple product                                               
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • TS2530 When I put a burned cd from one Mac into another Mac, song titles do not show up! I have to enter them manually! My CD player reads the titles that i on the cd; how can I get my Mac to do so?

    When I put a burned cd from one Mac into another Mac, song titles do not show up! I have to enter them manually! My CD player reads the titles that i on the cd; how can I get my Mac to do so?

    The problem is that I burned these CD's myself from music that I added from my personal collection to iTunes. The INFO is ON the CD's (it appears perfectly when I put the CD in my Numark mixer...so I know the info is on the CD), but for some reason, my MAC PRO will NOT read the info on the burned CD when I place the CD into the MAC PRO. The CD was burned on a MAC that I no longer own. But there HAS to be a way to transfer songs from a burned CD with the INFO that is on the CD burned with iTunes.
    PLEASE HELP!
    -Old Appel

  • I signed into my Apple ID on a new phone and I already had it on my iPod. When I signed into the new phone it won't let me buy anything unless I know my old security questions but I don't know the answers to them. How can I get past those or change them?

    I signed into my Apple ID on a new phone and I already had it on my iPod. When I signed into the new phone it won't let me buy anything unless I know my old security questions but I don't know the answers to them. How can I get past those or change them?

    See Kappy's great User Tips.
    See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities https://discussions.apple.com/docs/DOC-4551
    Rescue email address and how to reset Apple ID security questions
    http://support.apple.com/kb/HT5312
    Send Apple an email request for help at: Apple - Support - iTunes Store - Contact Us http://www.apple.com/emea/support/itunes/contact.html
    Call Apple Support in your country: Customer Service: Contacting Apple for support and service http://support.apple.com/kb/HE57
     Cheers, Tom

  • I connected my ipod touch 4g wi-fi with laptop ad hoc network....it's showing wi-fi signals but internet is not working...what is the problem in that can anyone help me...inadvances thanks

    I connected my ipod touch 4g wi-fi with laptop ad hoc network....it's showing wi-fi signals but internet is not working...what is the problem in that can anyone help me...inadvances thanks

    my laptop is Windows 7 and ip is this
    192.168.102.12
    255.255.255.0
    192.168.102.1
    DNS
    192.168.254.2
    192.168.254.3
    in ipod touch 4g is DHCP and its showing
    ip address 169.254.192.139
    subnet mask 255.255.0.0.
    remaining all blank

  • I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

    I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

    it allows you to use your cr files, Adobe - Adobe Camera Raw and DNG Converter : For Windows
    Camera Raw: How to use Adobe DNG Converter - YouTube

  • Facebook like button is not working, I have used the muse widget and created code from facebook. Does anyone know how to get this to work?

    Facebook like button is not working, I have used the muse widget and created code from facebook. Does anyone know how to get this to work?

    Hi connally25,
    Below is a link to a video tutorial on how to add a Facebook Log button, please check if you have followed the same steps to add the video.
    http://tv.adobe.com/watch/learn-adobe-muse-cc/adding-a-facebook-like-button/
    If you have followed the steps correctly and the button still does not work; here is a link to a forum thread which might help solving the issue:
    Facebook Follow Widget not working
    Regards
    Sonam

  • HELP I have lost all my motion 4 content from all the files, ive looked in all the files and they are all empty. can i get replacement content as I my dvds where stolen along. with my other laptop.

    HELP I have lost all my motion 4 content from all the files, ive looked in all the files and they are all empty. can i get replacement content as I my dvds where stolen along. with my other laptop. any Ideas. would be a great help. For Motion 4.

    Try a hard reset:- hold the home button AND the power switch - ignore the red "Slide to power off" and wait ubntil the iPhone powers down, and then restarts - at the Apple logo, release all the buttons and see if your contacts reappear.

Maybe you are looking for

  • Sound stops while playing music with iTunes Match

    While playing music from iTunes Match, the sound stops.  The music continues to play but there is no sound.  If I double click the song, the sound will start again.  But after that song is finished and it advances to the next song.  The sound will st

  • Cannot post SD documents after upgrade to Oracle 11g

    Dear Gurus, Lately I have tried to upgrade database for SAP R/3 Enterprise 4.7 from Oracle 9i (9.2.0.7) to Oracle 11g (11.2.0.2). I have tried some of its features including table and index compression. Right now my team is testing my server and find

  • USB VGA camera driver

    I have old HP USB Camera with the driver(sp35415.exe) which worked for XP. will it work windows 8. where can find driver for HP VGA camera?

  • Problems Printing with Macbook pro 10.4.6

    I have a MBP, and so far, no way to print. I try to do it, using airport, and even direct USB, but doesn't work, and the printer I have, acording to Epson is Universal. Is there someone, with a intel PB, that can print using a EPL-6200L. I when to th

  • Deployment errors--server instance

    Hi, when deploying, i got this error. can anyone solve me? Undeployment of component [testJMS] failed. Application testJMS is referenced by server and must be referenced by no server instances or clusters. Thanks