Hello, how can I interface a princeton ccd camera (microscope camera) with labview??

Hello,
Im trying to connect my microscope cam to labview, but Im getting started with labview,
my camera is managed by  a software called win view and it works; but I'm trying to control the camera by labview.
what's the way to allow labview to see my cam??
best regards

Hi Marcio,
it is important to have right information on the hardware you are using. in particular which is your camera type (FireWire, analogic, Camera Link, GigaEthernet, USB) and if you have the drivers of your image acquisition board.
Have you got LabVIEW Development System only? Which version? Do you have others NI LabVIEW Modules or NI Softwares (for instance NI Vision)?
I'm waiting for your news.
Hudson | AE NIIT

Similar Messages

  • I have a MacBook 6,1 and have a number of start up discs. How can I find out which one came with my model?

    I have a MacBook 6,1 and have a number of start up discs. How can I find out which one came with my model?

    They sometimes have that information on the label. Otherwise, it's trial and error. The model you have is a Late 2009 13" MacBook. It came with a special version of 10.6.1 pre-installed.

  • I have My Firefox Sync Key , how can install all my data wich came with that Key?

    I need your help I have My Firefox Sync Key Code or Key . how can I add to my new computer ?

    Check the Sync options when you have used Sync before and want to keep previously stored data on the Sync server.
    * click the "Sync Options" button at the bottom to select what to sync (Sync Options only affect the first sync)
    Select this choice if you want to restore data from the Sync server:
    * "Replace all data on this device with my Sync data"

  • How can I make a projection of an image (diaporama) with LabView?

    Hi, I would like to project an image (or better a matrix stored in a table) on a second screen (or videoprojector, or whatever) connected to the computer. In two words I would like to do what PowerPoint does by pressing on "diaporama".
    Does somebody knows if that is possible with LabView (without scrolling the LabView window on the second screen since that doesn't make a FULL SCREEN projection of the image)?
    Hope somebody can help
    Thanks
    TonyMontana

    Tony,
    I am not sure I understand exactly what you are trying to do as I never use PowerPoint.
    At NIWeek in 1999 (if I recall correctly) David Moore gave a presentation that used a program he wrote entirely in LV.
    I have a program which runs a slide show on a second monitor (projector). All the controls are on the main screen and the display on the second monitor consists of a simple subVI with a picture indicator sized to fit the projector window. The subVI keeps its front panel open and gets called every time the image updates.
    This is a work in progress and has not yet been used in public.
    Lynn

  • How can I build app's for RTE 8.0 with Labview 8.2

    Is there a possibility to build applications with LabView 8.2 in a way to execute them with the RTE 8.0. It's not a problem to save the sourcecode as LabView 8.0 format, but if I build this code e.g as  *.exe and try to execute with RTE 8.0 an error occured. The errormessage is, that it's not possible to execute an file created for RTE 8.2 with RTE 8.0. What is to do to build an RTE 8.0 compatible application?

    Applications written for 8.0 will only run with the 8.0 rte. New applications written for 8.2 will run only with the 8.2 rte. Your internal support doesn't know what it is talking about if they think otherwise. No need to upgrade the rte unless you paln to rebuild the 8.0 apps with 8.2. Both run times can be installed on the same pc if the old apps are working. Not much reason to change unless they need to be edited and you use 8.2 as the editor. I would image that if you build a new app in 8.2, it would have to undergo the same quality check as the 8.0 applications.
    You are able to do a save as for 8.0 so that users with 8.0 can open them and use them with the older version. It's simply not possible for a newer development environment to target a build for an older run-time. Before you even do a build, the source code is compiled for the version you are currently using. The only way to swithc compilers is to switch versions of LabVIEW.

  • How can I control a Festo (MH..4) Valve with Labview?

    Hey,
    i'm very new to this Labview stuff and have a minimal background in electronics so I'm struggling with trying to sort this one out.
    I have a high-frequency valve (~400Hz) that we would like to control via the 9 pin RS232 port using labview. is this possible?
    i imagine we will need an interface between the computer and the the valve (which requires a 24Volt digital signal) but I am not sure what to use. Buying a stock pc control board from LabVIEW is not an option because I will be running this from a laptop.
    cheers
    Nic

    Nic,
    you can easely control 2(3) of the 9 Pins of the RS232 Port with the VISA Propeties (Visa Open, VISA Propety (Modem line settings: DTR and RTS state (and Break (TDx)) , VISA Close)
    However, since the serial driver it is not made for this type of timed digital IO, I'm not shure about the resolution you might get. If you have a scope, then do some loop testing and move some windows or do some other system load :-)
    Have a nice weekend
    Greetings from Germany
    Henrik
    LV since v3.1
    “ground” is a convenient fantasy
    '˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

  • How can I access 6534 onboard timers for software triggering with LabView?

    I want to access the internal timers (with a VI?), so I can delay data output of the board (high precision timing, no system clock)?
    Thanks in advance!

    Sanchez,
    I am not sure that I totally understand your question. Do you want to replace the timing that the operating system provides LabVIEW with the timebase available on the NI 6534? If so, this is not going to be possible. If I have misunderstood your question, let me know.
    Spencer S.

  • How can we find the hostname of the devices connected with the interfaces of switch?

    how can we find the hostname of the devices connected with the interfaces of switch ? I have tried mac address and ARP, there are lot of servers connected with the switch having multiples LAN cards. So mac table shows the mac of physical machine as well as virtual machines. But i want to know only the physical machines. Is there any other method to find out the IP address, hostname of the physical machines only? 

    Hello Leo Laohoo
    Thanks for this information
    In our network most of the Servers are not of Cisco. Some of them are Vmware machines, some are Hyper V machines, etc. 
    Does IP device tracking show us only the IP addresses of the Physical Machines of the Vmware Server not of Virtual Machines?
    Regards
    Mukesh Kumar
    Network Engineer 
    Spooster IT Services

  • Hello, How can I delete episodes already seing from my apple tv? But I want to do that thru the aple TV. thanks

    Hello
    How can i delete some episodes on my apple tv? But i wish doind it thru the apple tv
    thanks
    Paula

    Welcome to the Apple Community.
    You can't delete shows from your history, you can only hide them and you need to do that from iTunes on your computer or mobile device

  • Hello how can i transfer photo for my old computer to the new one

    hello how can i transfer photo for my old computer to the new one

    If your computers are connected to the same network, you can turn on Sharing to allow you to see the contents of one from the other and do transfers. If there is no network, you can use "target disk mode" explained here: http://support.apple.com/kb/PH13842
    Otherwise, you will need to use external storage such as a USB flash drive.

  • Hello, How can I edit or delete a custom label in the contacts list on iOS 7.0.3 on iPhone 4S ?

    Hello, How can I edit or delete a custom label in the contacts list on iOS 7.0.3 on iPhone 4S ?
    i need it so muchhh!

    Sort of depend on what you are trying to do precisely. In Edit mode, if you tap on any label, you will be given a list of options, plus an Add Custom Label option near the bottom of the list

  • How can we interface external usb camera or usb device(storage, card reader) to Ipad 2.What all things are need(any development Kit apart from IOS sdk)

    Hi,
    Before going any further in my research, I want to know the views and opinions about the intent of my work I am about to start.
    AIM : I am trying to interface an external uvc camera with the ipad 2 and iphone .Just like in android there is a node(in unix and linux everythign is a file)which gets created in the /dev/ directory which can be accesses by the application using the native interfaces (JNI) and finally via the android code.I am trying to develop the similair application for the ipad 2 and iphone.
    Can some one plz point out :
    (1) How I can interface external hardware like ( external uvc camera) or any other USB device(a card reader, a storage device, a barometer etc)
    (2) I have googled about Apple's Authentication chip which can be used to interface the external h/w.Can some one point out how useful it is.Is this related to that somehow.
    (3)What are the things similair to JNI, node, /dev/ in the IOS for Ipad 2 and Iphone.
    I will be highly obliged ,if some one could provide me the top pointers on it.
    Thanks and Rgds,
    MangoApple

    1.) See
    External Accessory Programming Topics
    Connecting to an Accessory
    Monitoring Accessory-Related Events
    2.) See the MFi Program

  • Hello, How can I save audios rcvd from whatsup in Iphone 5 ? Thanks

    Hello,
    How can I save audios rcvd from whatsup in Iphone 5 ?
    Thanks

    You might want to start with reading the iPhone user guide. Basic processes like synching are covered: http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    In short, you must use iTunes to synch photos. You can also get more information in this knowledgeable article: iTunes: Syncing photos - Apple Support

  • Hello, How can I make borders in pages?

    Hello, How can I make borders in pages?

    What version of Pages?
    Just make a suitable bordered shape and make it a Master Object in the background.
    PS. It is the sure fire way to make your work look amateur, which is why it is not in the Apple templates.
    Peter

  • Hello, how can i record my own ringtones and acti...

    Hello,  how can i record my own ringtones and activate them for listening?
    thanks a lot for a feedback
    kind regards
    nils

    What device are you currently using?
    Nokia C6-00 user.

Maybe you are looking for

  • Master table, detail table, detail table not getting refreshed selection

    i have a page where i am displaying data as master table and detail table. both table VOs are based on SQL queries which use bind variables. i have a view link between vos of type 1:M i created master table detail table page by dropping detail iterat

  • Unable to update latest 11.0.4

    As above, I couldn't update itune latest 11.0.4. The message stated the file could be corrupted during download. I can't even update new iOS software. I encounter similar message error when installing updates for Safari 5.1.9 and Security update 2013

  • Bug on the property "disabledDays" of the component af|inputDate ?

    Hi, I think there is a bug on the property "disabledDays" of the component af|inputDate : <af:inputDate disabledDays="#{MyInputDate.disabledDays}" public class MyInputDate {          public DateListProvider getDisabledDays() {         return new Date

  • How to "force" specific format for data entry field (ex: European Phone #)

    Hi, I have a table field of 10 chars long holding a phone number.  I need to display this field and allow modification on its content in the following format: "99_99_99_99_99" where "_" is a blank.  What would be the easiest way of managing this ?  O

  • Curious effect of plugging in AC power

    Hi  I have a Lenovo Thinkpad T510 I am experiencing a curious problem.  Video runs perfectly with the power cable unplugged, but when I plug it in it becomes very jerky. The problem is not merely video playback, but, for example, scrolling in web bro