Hello  how to reformat a macbook pro

hi im geezar   how to reformat a macbookpro .???? without using a disk.???

Boot into recovery mode by rebooting and holding the command and r keys down while you reboot. Then use Disk Utility to erase the hard drive. Depending on what you want to do, you may want to do a secure erase that writes zero's to the hard drive.

Similar Messages

  • How to reformat a Macbook pro 2011 hard drive?

    Hello,
    How do you reformat a MacBook Pro (OS X 10.7.3) 2011s Hard drive? I already backed up all the files I wanted to save. But since I have the new Macbook pro 2011 (only a few months since I got it) it didn't come with an installation disc, but instead already came with all the applications. I'm wondering how to reformat the hard drive so it wipes out everything and I can start fresh and what would happen to all the applications?

    Well Lion has a Lion Recovery Partition on the drive you can access by holding command r and booting, there you can erase the Lion OS X partition completely (all files and programs) and reinstall Lion or simply reinstall Lion if there is a issue with it (no programs or files are touched in this second procedure)
    Lion is downloaded from apple's servers, you need AppleID and a fast reliable internet connection with no bandwidth caps limiting you.
    https://support.apple.com/kb/HT4718
    If you want to replace the drive, there is software called Carbon Copy Cloner than can clone both the Lion OS X Partition and the Lion Recovery Partition to a external drive intact (excpet what's in the Trash, no Filevualt, no bootcamp, use free Winclone for that)
    Hold the option key and you can boot from the external drive and format and clone everything to the new internal drive. TimeMachine of 10.7.2 and later can be booted from it's Lion Recovery Parttion as well just to restore only, cloning is better process because it gives full access to everything like before on the internal drive.
    http://www.bombich.com/index.html
    Some newer Mac's have Lion Internet recovery built in where the firmware will install the Lion Recovery/OS back onto a completely blank/new hard drive.

  • How to reformat '06 Macbook Pro - cannot reach desktop

    I have a 2006 Macbook Pro. I try and boot it but I cannot reach the desktop. My plan is to try and reformat it with 10.6.7 Snow Lep or 10.7 Lion (does Lion work with '06 Macbook Pro's, how about Mountain Lion?)
    But here is the issue. I cannot access the desktop and the DVD Drive is non-functioning. The obvious solution is to do a bootable USB drive (I have another newer Macbook Pro to do the setup) BUT... since I cannot access the desktop, how do I actually do the reformatting with the bootable USB?

    Sorry, I'm a PC guy (don't kill me)
    Oh, I didn't realize you weren't part of the club. I'm afraid I've said too much... now you must die!
    Okay, on a more serious note, Lion may work okay, but memory requirements in Lion are significantly higher than in Snow Leopard, and that machine only has 2 GB of RAM (assuming it hasn't had more added). I wasn't able to run Lion well on a 2010 machine with 4 GB of RAM (it ran great after upgrading the RAM), after upgrading from Snow Leopard... but I may have been doing more memory-demanding tasks than your brother, so that may not be relevant. You could certainly try Lion and see what happens.

  • How to: Reformat my Macbook Pro 10.7.4

    hey guys
    i know this question has been asked alot but i cant seem to find an exact answer to my question. i have a macbook pro late 2008 with OS Lion install and im currently copying everything i want to save on an external harddrive, but cant seem to find find a way to reformat my MBP. i got lion of the app store and know that i cant just wipe de HD with Disk Utilities because i wont be able to reinstall OS Lion, on the net they keep talking about LION RECOVERY DISK ASSISTANCE but they say you need to have a recovery saved or somthing of the sort... isnt their just a simple CLICK TO REFORMAT BACK TO SCRATCH WITH OSX LION RE-INSTALLED?
    thanks for your help.
    Sean

    You can format your Lion partition because you don't need it to download Lion again. Boot in recovery mode pressing Command and R keys, format the partition using Disk Utility (it's called Macintosh HD if you didn't modify it) and reinstall. Note that your computer will download Lion, so the process could be long. When you have installed it, you can restore a Time Machine backup (if you did one) or restore your files of your external drive manually if you didn't activate Time Machine

  • How to connect my macbook pro to my car cd player

    hello how to connect my macbook pro to my car cd player

    If the CD player has audio line outputs, you could tap the audio input port of your MBP.  I do question the practicality of doing so.
    Ciao.

  • Hello..i have the macbook pro and i had a password when it opens and when i have updated the software when i delete something it asks me every time to put my password ;/ how do i delete my password or just correct a setting for it?

    hello..i have the macbook pro and i had a password when it opens and when i have updated the software when i delete something it asks me every time to put my password ;/ how do i delete my password or just correct a setting for it?

    You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type:  ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.   
    Repair User Permissions

  • Hello, I have had my Macbook Pro stolen from my apartment. How do I lock it or track it? It there anything I can do?

    Hello, I have had my Macbook Pro stolen from my apartment. How do I lock it or track it? It there anything I can do?

    Do you have iCloud enabled?
    On your Mac go to iCloud.com.
    Sign In then click Find My iPhone  (finds all devices, not just an iPhone).
    Otherwise report the theft to local authorities.   Reporting a lost or stolen Apple product

  • Hello i just got a MacBook Pro and a website i am trying to get on is saying i need to allow pop-up blockers but i don't know how to do so can anyone help?

    hello i just got a MacBook Pro and a website i am trying to get on is saying i need to allow pop-up blockers but i don't know how to do so can anyone help?

    Go to your browser preferences and select the appropriate setting.  This is for Safari:
    Ciao.

  • How to reset my Macbook Pro for resale

    So my question is how could i reset or reformat my Macbook Pro so that i could sell it and not worry about my information being used by the next owner? i have a late 2011 model and it came pre installed with Lio and i updated to M-Lion so your help and advice would be awesome
    Thnaks in advance

    turn your computer on while holding the command + options + r keys.
    that will start internet recovery to reinstall Lion.
    do not boot using command + r keys - which will installl mountain lion.

  • HOW TO RESET MY MACBOOK PRO MD976 AS I WANT TO DELETE ALL DATA FROM MACBOOK

    how do i reset macbook pro MD976 to factory setting ? , cause i want to sell it .

    Follow these instructions step by step to prepare a Mac for sale:
    Step One - Back up your data:
           A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
           B. Clone to an external drive using using Carbon Copy Cloner.
              1. Open Carbon Copy Cloner.
              2. Select the Source volume from the Select a source drop down menu on the left side.
              3. Select the Destination volume from the Select a destination drop down menu on the right
                  side.
              4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
                  sure to opt for that.
                   Destination means a freshly erased external backup drive. Source means the internal
                   startup drive.
    Step Two - Prepare the machine for the new buyer:
              1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
              2, Remove any Open Firmware passwords or Firmware passwords.
              3. Turn the brightness full up and volume nearly so.
              4. Turn off File Vault, if enabled.
              5. Disable iCloud, if enabled: See What to do with iCloud before selling your computer.
    Step Three - Install a fresh OS:
         A. Snow Leopard and earlier versions of OS X
              1. Insert the original OS X install CD/DVD that came with your computer.
              2. Restart the computer while holding down the C key to boot from the CD/DVD.
              3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
                  Optionally, click on the Security button and set the Zero Data option to one-pass.
              4. Install OS X.
              5. Upon completion DO NOT restart the computer.
              6. Shutdown the computer.
         B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
             Note: You will need an active Internet connection. I suggest using Ethernet if possible because
                       it is three times faster than wireless.
              1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
                  Utilities window appears.
              2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
              3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
                  on the Erase tab in the DU main window.
              4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
                  and set the Zero Data option to one-pass.
              5. Click on the Erase button and wait until the process has completed.
              6. Quit DU and return to the Mac OS X Utilities window.
              7. Select Reinstall Lion/Mountain Lion and click on the Install button.
              8. Upon completion shutdown the computer.
    *If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

  • Hello I am on a macbook pro (retina IOS 9) i have installed xcodes and command line tools but codeblocks does not compile, terminal gives this message /Users/MacPc/Desktop/Untitled1: Permission denied      any one has a solution

    Hello I am on a macbook pro (retina IOS 9) i have installed xcodes and command line tools but codeblocks does not compile, terminal gives this message /Users/MacPc/Desktop/Untitled1: Permission denied      any one has a solution?? please...

    Back up all data before proceeding.
    This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
               ▹ Restart
    from the menu bar.

  • Hello, what if forgot my MacBook Pro's password and my iPhone's password. i just don't know what to do. there so many necessary thing on my phone. help me please as soon as possible.

    hello, what if forgot my MacBook Pro's password and my iPhone's password. i just don't know what to do. there so many necessary thing on my phone. help me please as soon as possible.

    Here is how to reset login password for MacBook:
    http://www.macworld.com/article/2013764/how-to-reset-a-login-password.html
    and here is how for iPhone:
    http://lifehacker.com/5852948/what-to-do-if-youve-forgotten-your-iphones-passcod e

  • Reformatting my MacBook Pro Retina

    I would like to know whether do I have to pay if I want to reformat my MacBook Pro Retina to it's original factory setting.

    You should be able to do this yourself.  Follow these guidelines:
    http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/
    Ciao.

  • Hello please help me my MacBook Pro screen when desktop switching fingers pressing 3 distorts a bit, with him?

    hello please help me my MacBook Pro screen when desktop switching fingers pressing 3 distorts a bit, with him?

    First, remove Comodo. You don't need it, and it sounds like it is causing a problem.
    The other symptoms sound like you have adware installed. Comodo might have detected some components of that adware, or it might not have, but whatever the case, you should NEVER allow any anti-virus software to quarantine or delete files from your computer. See: How to remove infected files.
    Regarding the adware, see my Adware Removal Guide.
    (Fair disclosure: The Safe Mac is my site, and contains a Donate button, so I may receive compensation for providing links to The Safe Mac. Donations are not required.)

  • How to connect my macbook pro to an older tv that has rca cable?

    How to connect my macbook pro to an older tv thas has rca cables?

    The yellow RCA jack is called "NTSC Analog Composite Video", or "Video" for short. You need an adapter to "Video".
    Exactly which MacBook Pro (or which output Display Port) do you have?

Maybe you are looking for

  • MacBook to AX

    I'm attempting to use a spare MacBook to transfer an available wireless signal from that MacBook to my AX. The spare MacBook is connected to the AX via an Ethernet cable. My objective is to make that signal available from the AX. I'm looking for the

  • FI Distribution & Substitution

    Hello, I am using the FI-GL % distribution (FAGLGA35) to distribute the Balance sheet amounts in a group of profit centers (PC 1, 2, 3, 4) to a subset of Profit centers (PC 1, 2, 3).  The amounts are distributing as expected.  However, the Segements

  • CS6 beta error message 16, configuration

    iMac X 10.7.3, 3.06 GHz, 8GB Ram, Have triedto download numerous ties and like the foll, hoped for different reuslts.  In each instance it 'seems' to perform but when I click <.app there is a long delay, unlike CS 5.5 or Lighroom 4.1, and then a pop

  • TS2972 Transferring Itunes from Pc to Macbookpro

    Hello, I am trying to transfer my itunes from my old pc to my new macbook pro, I enabled homeshare via the shared wifi and at first it seemed to work. But out of my 2,000 songs it only imported about 200. How should I transfer the rest of them? Also,

  • Guardar plantillas y asociarlas a un documento

    Hola, ante todo muchas gracias por las respuestas. Mi problema es que deseo si es posible guardar unas plantillas de unos documetos con sus cabeceras y pies de pagina y si se puede asociarle cualquier documento para que la impresora ditiller me lo im