Hello I am having trouble burning cds keep getting error mes. 4450 ? Help!
Hello, I am having trouble burning CDs from itunes keep getting error message 4450? Help
The next time you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Similar Messages
-
Having trouble installing itunes, keep getting error message R6034
I'm trying to install i-tunes and I keep getting a runtime errorr message and a windows message. Does anyone have suggestions on how I can re-install i-tunes?
Hi kstnza,
Thanks for using Apple Support Communities. This article has steps you can take for the errors you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari -
Keep getting error 1611on itunes help!!
keep getting error 1611on itunes help!!
Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
iTunes: Specific update-and-restore error messages and advanced troubleshooting -
HT203200 Cannot get into itunes via Mac keep getting error −50 ? help
Cannot get into itunes via Mac keep getting error −50 ? help please
Make sure your Mac's software is up to date.
Open system Preferences > Software Update > Check Now.
Restart your Mac after all updates are installed.
Then try iTunes.
Which OS X is installed on your Mac ?
Click the Apple () menu top left in your screen. From the drop down menu click About This Mac. The version is noted there.
Troubleshooting advice can depend on that information. -
Cant burn CD, keep getting error 4000. Win 7/iTunes 10.2.2
Looking for some assistance please. Im suddenly no longer able to burn an audio CD. Im running Windows 7 (64) and the latest 64 bit iTunes.
I keep getting "error 4000" during the finishing of a CD.
Ive updates drivers, unchecked CD text, crossed my fingers & wished upon a star. Nothing seems to work.
Can anyone help?Sorry, forgot to include...
Microsoft Windows 7 x64 Ultimate Edition (Build 7600)
Hewlett-Packard HP Pavilion dv7 Notebook PC
iTunes 10.2.2.14
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.1
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.0.25
Apple Mobile Device Driver 1.55.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 0016AC08080FF778
Current user is not an administrator.
The current local date and time is 2011-05-30 10:44:03.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 3200 Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.2.2.14 (x64) is currently running.
iTunesHelper 10.2.2.14 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: TSSTcorp CDDVDW TS-L633L, Rev 0400
Audio CD in drive.
Found 18 songs on CD, playing time 77:45 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 00:32:20
Track 3, start time 05:49:54
Track 4, start time 09:51:07
Track 5, start time 14:11:65
Track 6, start time 19:31:21
Track 7, start time 22:56:73
Track 8, start time 27:02:48
Track 9, start time 30:41:17
Track 10, start time 35:36:16
Track 11, start time 39:49:66
Track 12, start time 44:39:23
Track 13, start time 48:46:02
Track 14, start time 62:17:41
Track 15, start time 62:41:45
Track 16, start time 67:03:74
Track 17, start time 70:45:60
Track 18, start time 74:04:33
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 10 16 20 24.
The drive CDRW speeds are: 10.
The drive DVDR speeds are: 10.
The drive DVDRW speeds are: 10.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive E: TSSTcorp CDDVDW TS-L633L on CDR media at speed 24X. -
i can't burn cd's in iTunes anymore. I get error code 4450 when I'm trying to burn a playlist. Songs from my own cd's, or bought in iTunes (have not burned 7x's as I can't BURN any cd's at all!), Then my cd gets stuck in the drive. and it says "cancelling burn" forever and then itunes freezes up. I have a Dell with Windows 7.
-I've slowed down the burn as slow as it can go
-I have bought 3 different brands of cd's
-i have the latest version of iTunes.
Can someone help me?I have Windows 7 on a Dell. Open and play iTunes in the compatability mode and use Windows XP (service pack 2). Disregard any messsages to disable the compability mode. This has worked for me. I have also reinstalled iTunes and played with burn speeds etc. These ideas did not work. Compatability mode works.
-
Can't burn CD, keep getting error 4000, Vista, ITunes 10.2
I have made several attempts to burn CD from a playlist on iTunes and continue to get error 4000. please help me
my Diagnostics:
Microsoft Windows Vista HomePremium Edition Service Pack 2 (Build 6002)
Hewlett-Packard HP G60 NotebookPC
iTunes 10.2.2.14
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.1
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.0.25
Apple Mobile Device Driver1.55.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number001FAF180411EF60
Current user is not anadministrator.
The current local date and timeis 2011-05-30 14:54:30.
iTunes is not running in safemode.
WebKit accelerated compositingis enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 8200M G
**** External Plug-insInformation ****
No external plug-ins installed.
iPodService 10.2.2.14 iscurrently running.
iTunesHelper 10.2.2.14 iscurrently running.
Apple Mobile Device service3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM(2.2.0.1),
E: HL-DT-ST DVDRAM GT20L, RevDC03
Drive is empty.
Force Optical Power Calibrationbefore burn is turned on in the preferences.
The last failed audio CD burn haderror code 4200(0x00001068). It happened on drive E: HL-DT-ST DVDRAM GT20L onCDR media at speed 10X. -
BT Vision setup won't work, keep getting Error Mes...
I have just recieved my new BT Vision box, I already had a BT phone and broadband (with BT HomeHub), with no problems in service with them, and thought the offer from BT Vision was great, but now have noticed several people on this forum having problems with their service, some of their problems are similar to mine; my BT Vision setup won't work, it will not start let alone complete the setup process, I keep getting Error Message CO3.
It tells me to check my broadband is working; it is. It tells me to check any Powerline adapters are correctly setup, but I'm not using them, because my broadband hub is close to my TV. It tells me to check my cables are connected; they all are, and it tells me to restart my Hub and Vision+ box which I've done several times and achieved no satisfactory result.
I placed my order on Tue 22 Feb 2011, recieved my equipment on Thu 24 Feb 2011, and was told it would be activated the same day, I only decided to plug it all in and set it up earlier today; Fri 25 Feb 2011. I tried sorting out the problem over the phone earlier, speaking to someone in CustomerCare, and they said it would be activated and working by midnight of 25/02/2011- (before the morning of 26/06/2011), but it isn't.
I will give my BT phone number only to a BT employee who can actually help me, and get things done.
The account and order is in my wife's name, but I am the more technically minded, and less easily stressed individual, so would appreciate any advice or assistance you could give.
P.S. I occasionally, but rarely, have seen other Error Messages such as Error Message CO1.Hi Nahar-Hewitt,
Thanks for the post and welcome to the forum. I am sorry that you are not yet able to use your BT Vision service.
The C03 error message can indicate that the order on our system has not yet completed. This would explain why your service is not working. Are you still getting this message when trying to use Vision? If so then I can help.
Please drop me an email to the email address in my profile. (click on my name and you will find the address under the "about me" section). Include your BT account details and the link to this thread.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
I keep getting error A12e5 [was: Help]
I keep getting error A12e5
Hi simpsonproduct,
Lets try the suggestions mentioned under the below articles and check if they help.
http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
http://helpx.adobe.com/creative-cloud/kb/a12e1-error-downloading-creative-cloud.html
Cheers! -
I Keep getting Error 7 Please help.
I Keep getting Error 7 on my iTunes and Ive reinstalled its many times, ive also tried the Winrar way and it still didn't work, The message i keep getting when i try to open iTunes is "The procdure entry ponit" "AVCFURLAssetInheritQueryComponentFromReferencingURIKey could not be located in the dynamic link library AVFfoundationsCF,dll." And when i press ok it keeps saying "iTunes was not installed correctly, please reinstall Error 7" please help i want to use my iTunes again. thank you
Hi Julesayee,
Welcome to the Apple Support Communities!
I understand how frustrating it can be when you cannot open iTunes as you would expect. It sounds like you have tried some good troubleshooting already as well. When you uninstall iTunes, all of its components must be removed with it and in the correct order. Please use the following article for information on troubleshooting an error like the one you are receiving.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Have a great day,
Joe -
I have a new IMac computer with Leopard and I'm having problems burning DVDs. I created a project using IDVD and have audio and pictures (imported individually from Iphoto) that I created into slideshows. I'm try to burn my final copy and continue to receive the "Error during rendering/encoding" message. I looked at earlier threads and saw some people had success when saving it first to a disk image however when I attempted to do that I received the same error. I know I have plenty of memory space since this project is very small. Please let me know if you have any ideas!!
Thanks!Hi,
I have a new mac with Leopard since a week, and I had the same problem ("error during rendering / encoding..."). This happened when burning to a disk image.
I tried a lot of things :
* very small project
* create a new user
* put pictures in a folder, and not drag them from iphoto
* change the theme
I still had the same problem.
The last thing I tried was to put all the files used by idvd on the hard disk (instead of of an external firewire disk).
It worked ! (with the small size project).
I'm trying to burn the large project again...
I will tell you if it succeeds...
Best regards,
Nicolas -
I ran a diagnostic, here it is! I have burned 4 other CD's and now I'm having trouble...any help would be HUGELY APPRECIATED!!
thanks,
Amy
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Computer Corporation Dimension 4600i
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), sscdbhk5 (1.0.0.1),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: Intel(R) 82865G Graphics Controller\Intel(R) 82865G Graphics Controller
IDE\DiskST380011A______________________________8.16___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STCD-ROM_GCR-8483B_______________1.05___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomPhilipsDVD+RW_DVD8601__________________6D11___, Bus Type ATA, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: HL-DT-ST CD-ROM GCR-8483B, Rev 1.05
Drive is empty.
E: Philips DVD+RW DVD8601, Rev 6D11
Drive is empty.
The last failed audio CD burn had error code 4450(0x00001162). It happened on drive E: Philips DVD+RW DVD8601 on CDRW media at speed 4X.I have Windows 7 on a Dell. Open and play iTunes in the compatability mode and use Windows XP (service pack 2). Disregard any messsages to disable the compability mode. This has worked for me. I have also reinstalled iTunes and played with burn speeds etc. These ideas did not work. Compatability mode works.
-
Why wont itunes download on my laptop running on windows vista, keep getting Windows error127, can anyone help please this is driving me insane, tried 9 times already without
success.Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates -
TS3694 keep getting error code 1015 help please
as title says i keep getting this error code while tryin to restore (1015)
http://support.apple.com/kb/TS3694#error1015
-
Keep Getting Error in Xcode - Help me - Reward available
Keep getting this error when compiling. See this picture: http://pandamonia.us/xcodeError.png
Source code can be obtained by contacting me at "[email protected]"
Anyone who can fix this will receive a free license to Rectangle Tetris 3.0 and a Special Thanks mention in the About window.Open the Targets Folder and see if the AppController.m file is under the "Compile Sources". Also let us know which frameworks you have under the "Link Binary With Library" folder.
Does your AppController use a framework that has not been added?
And finally, does your myDocument.h file have "#include AppController.h"?
Maybe you are looking for
-
Has anyone gone for 32GB of RAM?
I understand Crucial seem to make the current leader in Mac RAM upgrades, with there better heat sinks.. has anyone dared to go to 32GB? or on a more serious note, has anyone even fitted 16GB of RAM?
-
Hi, In Unix System, File System SAPDATA1,SAPDATA2, SAPDATA3 are Fully Used. Only SAPDATA4 is occupied 97%. Now I want to Create a New File system SAPDATA5 and I want to attach the same to SAP Database. Kinldy Adivce how to proceed with Usefull steps
-
How to execute a shell script which is present in remote machine using ODI
I have requirement of executing a batch (shell script) which is present in the remote machine. i have an ODI agent in remote machine as well. I have created agent locally by using the remote machine IP and port. I am able to test the agent successful
-
I've some problems for installing HTML DB 1.6 in my Oracle Database (v9.2.0.2 for Windows XP). After the runtime script is terminated the installation log shows several errors. The first error encountered is: [coreins.sql] ...grant privs to flows own
-
Hi all, Can you please explain me, what what we need consider for 3.5 to BI 7.0 upgrade. Thanks in advance, Willam