Hello! i am using ipad n i am not able to connect to itunes store.Whenever i open itunes it syas "cannot connect to itunes store".i tried resetting the network settings n also tried changing the dat and time settings as mentioned but it still doesnt work!

hello! i am using ipad n i am not able to connect to itunes store.Whenever i open itunes it syas "cannot connect to itunes store".i tried resetting the network settings n also tried changing the dat and time settings as mentioned but it still doesnt work!please help!

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

Similar Messages

  • Cannot change date and time settings, popup "These files can't be opened: Your internet security settings prevented..."

    When I try to change my date and time settings I get a Windows Security popup that reads: "These files can't be opened.  Your Internet security settings prevented one or more files from being opened. C:\Windows\system32\rundll32.exe"
    I have Windows 7 64 bit.  I also have McAfee SecurityCenter installed.  I have tried turning off my firewall temporarily, but the problem persists.  I am not sure if it is some type of virus.  If anyone could give me some information
    as to what could be causing this I would appreciate it.  Thanks in advance.

    Hi,
    Perhaps, this issue is caused by a sign of corruption.
    Please try to use sfc/scannow to check the System Files.
    Also, You may refer to the following link.
    http://www.sevenforums.com/general-discussion/71526-cant-change-date-time-2.html 
    Important Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • When trying to download apps to my ipad, I get a message saying a secure connection could not be established and to check my date and time settings?

    When trying to download apps to my ipad, I get a message saying a secure connection could not be established and to check my date and time settings.  Can someone tell me what this means and how to fix the problem?

    It's a POP account. I decided to clean up my mailbox today after noticing the computer was real slow after USA Today started sending their daily top stories with new graphics. Also before I noticed the problem with mail deletion - two things happened. 1) I updated security sofware as prompted by Apple and 2) downloaded Mackeeper and went throught some preliminary scans but did not buy their package. Thanks forn nstaying with me.

  • Getting an error message: "if you are here, it is probably because your computer's clock is wrong."  Ergo, I can't get to the page I need.  My clock's date and time are right.  After re-booting, went to wrong time zone, which I changed-- still getting msg

    Getting an error message: "if you are here, it is probably because your computer's clock is wrong."  Ergo, I can't get to the page I need.  My clock's date and time are right, but time zone was wrong-- changed & saved it, but still getting error msg

    'Requires=network.target' wasn't in it so I added it but nothing's changed. I've left it in because openVPN does require network.
    As I said, I had this problem with a script so I don't think it's anything specific to openVPN. I had a weird occurrence this morning however. When I started the computer up this morning  openVPN worked just fine. However when the computer rebooted openVPN couldn't resolve the host address again.

  • HT204266 cannot connect to the store...a secure connection could not be established. please check your date and time settings...  I check the date and time, and the store still gives me the same error

    I am having trouble connect to the app store, the error I am given is - Cannot conntect to the Store. A secure connection could not be established.  Please check your Date & Time settings. - I checked my date and time settings and also shut down my Ipod touch.

    See:
    Can't connect to the iTunes Store
    Also, besides the time and date being correct make sure the time zone is also correct. Also, if yo have iOS 5, make sure date&Time is set to Automatic.

  • TS4000 What is the "correct" date and time settings for icloud reminders?

    What is the "correct" date and time settings for icloud reminders?

    Sep. 18th. We don't know what time.

  • Error: 0271: Real Time Clock Error - Check Date and Time settings.

    Hello all,
    I have lenovo T430s laptop that is configured with Bitlocker encruptions and TPM PIN entry. I don't think that has anything to do with the error msg I am getting but here it is. Error: 0271: Real Time Clock Error - Check Date and Time settings.
    Press Esc to continue or F1 to enter setup. I am unable to get into BIOS or even the login screen for Windows 7.
    Any advice would be appreciated.

    Thanks to everyone for the help.  Just want to close this out.  I had a IBM/Lenovo technician here today and he replaced the CMOS battery.  Upon the change, the computer is fine being reconnected to the dock (the three times I tried it).  So it has been resolved with the battery.  Surprised by the incompatibility claim because I am not having issues now.  Wondering if it's just a USB 2.0 vs. 3.0 thing (and Lenovo trying to sell more peripherals, of course).
    Thanks!

  • Equium M40X - error message at start up; 0271: Check date and time settings

    Hi when I start the laptop the message appears:
    ERROR
    0271: Check date and time settings
    WARNING
    0251: System CMOS checksum bad - Default configuration used
    Press <F1> to resume, <F2> to Setup
    I would assume this is because my CMOS battery has had it? Is this a know issue with this laptop and how do you get at it to replace it?

    Hi
    It sounds as though your notebook has the wrong time in the CMOS (BIOS).
    If you can get into the BIOS, check the date and time settings and make sure they are correct.
    It may also be a case of the CMOS battery going out. When this happens your notebook will tend to not keep the correct time.
    In such case you should connect the AC adaptor and should leave it connected for about 20-24 hours. At the end of this period the CMOS battery should be fully charged.
    Good luck and best regards

  • Real Time Clock Error - Check Date and Time settings, System CMOS Checksum bad

    Hello everybody,
    Can help anyone to resolve my problem.
    I have an Thinkpad W520 (42823FG), BIOS 8BET60WW 1.4        When I disconect AC power and remove battery and connect again, I see this message on screen:
    "Real Time Clock Error - Check Date and Time settings, System CMOS Checksum bad
    Press Esc to continue or F1 to enter Setup"
    Is this a system board problem or CMOS battery problem ?
    Thank you

    Hello and welcome,
    It's probably (hopefully) just the CMOS battery.  The easiest way to find out is to just replace that battery.
    Page 85 of the Hardware Maintenance Manual:
    Hardware Maintenance Manual
    Here's an example of the battery.  I'm not recommending (or not) this vendor:
    http://www.ebay.com/itm/New-Lenovo-ThinkPad-W500-W510-W520-W530-W700-W701-W701ds-CMOS-RTC-Backup-BAT...
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Date and Time Settings

    I notice date and time settings on some of my iBooks do not hold,but some do...Is there a difference in say the 300 vs the 366/466 or is it just whether or not their battery is good or not, or if they have airport cards and 'set date/time automatically' on?...I read a past post, but not really that clear...Can someone clarify.
    Thanks, Rick

    PRAM contains the following information: 
    Mac OS X
    Mac OS 9
    The iBook should remember which Airport to connect to regardless.
    regards
    mrtotes

  • BT6510: does it retain date and time settings afte...

    I am considering replacing my BT Synergy 4500 with a BT 6510. One significant factor is whether the 6510 retains date and time settings afetr a power cut: the Synergy doesn't and resets to 01.01.2000!
    The manual for the 6510 doesn't mention this and the operative on the website chat simply referred me to the manual.
    Does anyone actually have a 651o and can give me an authoritative answer??

    PRAM contains the following information: 
    Mac OS X
    Mac OS 9
    The iBook should remember which Airport to connect to regardless.
    regards
    mrtotes

  • Droid razr date and time settings

    Latest update for my Motorala Razr has incorrect date and time settings will not correct

        Oh goodness IMI. Let's get that time to set correctly. Please try restarting phone. If still displays incorrect time, please go to Settings> Date & Time> Uncheck Automatic Date & Time & Uncheck Automatic Time zone. Then Select Set Time> Set correctly> and select OK.
    Thank you,
    VanessaS_VZW
    Follow us on Twitter @VZWSupport

  • Having trouble deleting songs from iPod 6th Gen. HELP!!. Of course i have tried highlighting the songs and then pressing delete but it still doesnt work.

    Of course i have tried highlighting the songs and then pressing delete but it still doesnt work.
    HELP! !

    hiya!
    hmmmm. some other connection issues have been known to cause the -69, although under those circumstances people more typically get the "disk cannot be read from or written to" error message.
    working on that theory, let's see if anything in this document helps:
    "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod
    love, b

  • When I try to update creative cloud I get a popup to login, I enter my Adobe password but it doesnt work. I reset my password and tried again but it still doesnt work.

    When I try to update creative cloud I get a popup to login, I enter my Adobe password but it doesnt work. I reset my password and tried again but it still doesnt work.

    Hi,
    Thank you for getting back to me. I was able to locate the opm.db file and delete it. (as instructed below) I go to applications>Adobe Creative Cloud and double click. It prompts me to login, it logs in and says there is an update, I click update and it prompts me to sign in with my password, I enter the same password and it doesn't take it. Also, the opm.db file is back in the OOBE folder. Im I launching Creative Cloud incorrectly?
    Close the Creative Cloud Desktop application.
    Navigate to the OOBE folder.
    Windows: :\Users\[user name]\AppData\Local\Adobe\OOBE
    Mac OS: /Users/[user name]/Library/Application Support/Adobe/OOBE
    Delete the opm.db file.
    Launch Creative Cloud. Try signing in.

  • Sometimes I cannot bring up iTunes when I click on the icon. Have even gone to the START Menu and clicked on that icon but it still wont work. The only way I can fix it.....sometimes.....is if I reboot. Please help me 8-) Thanks

    Sometimes I cannot bring up iTunes when I click on the icon. Have even gone to the START Menu and clicked on that icon but it still wont work. The only way I can fix it.....sometimes.....is if I reboot. Please help me 8-) Thanks

    I understand that Firefox is no longer working on your Windows Tablet. The development of Metro did stop and has been discontinued. However what version were you on before this started to happen?

Maybe you are looking for

  • Substituting WF-BATCH user in PO creation Workflow

    Experts, Looking for a bit of guidance on an issue that has been hanging around a while, and no one seems to be able to assist. Here is the scenario: Purchasing P Req's are created, and workflow routes them to the appropriate releaser(s) for approval

  • Marking Cc in the mail

    Hi friends,           We are developing the Proxy to mail interface. Where i am using the interface at different place where ever required in the abap and as per the requirements i will send the mail ids from the proxy through the element 'To'. I hav

  • Dictation Almost Great: The Random Capital Letters Plague

    The dictation program is getting close. I use it all the time, but there is one continuing problem: random capitalization. If this one problem were solved, it would be a really close to excellent. And it seems like it should be a relatively easy thin

  • Get a VBA error when I run queries

    I am running into an error when I try to run any queries.  the error says Object Library feature not supported and goes into the VBA code.  any ideas how to fix this error?

  • Photoshp CS2 - why can't I just cut an image into a circle?

    Hi, I could do this with some lousy Microsoft pictureit my kids had years ago - and yet I cannot do it with photoshop. Have followed several tutorials saying draw the circle - invert, yadda yadda and I just keep getting errors. Only thing I can cut i