Hello; I am using Numbers '09 version 2.1 (436). I tried unsuccessfully to upgrade at one point. Now can't open existing documents. Message "The index.xml file is missing".
Hello; I am using Numbers '09 version 2.1 (436). I tried unsuccessfully to upgrade at one point. Now can't open existing documents. Message "The index.xml file is missing". How can I correct this ?
Thank you
Tom
I't not iWeb that got damaged but the domain file. The index.xml file is inside the domain.sites file that's located in your Users/Home/Library/Application Support/iWeb folder. Do you have a backup of that file you can revert to? If so then do it. Otherwise a long shot but try the following:
close iWeb.
delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home/Library/Preferences folder.
go to your Home/Library/Caches/com.apple.iWeb folder and delete its contents.
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
OT
Similar Messages
-
Please let me know what I can do to get my Numbers (iWork 09) working properly again.
Here is what is going on:
Numbers in iWork 09 not working can't access Blank, Checklist and many other files within Numbers. I can open the program but only a few files are available. When I click on the file (which also has no icon just the name of the file) this warning appears:
The document "Blank.nmbtemplate" is invalid. The index.xml file is missing.
I recently had to get a new hard drive installed and had the system upgraded and more memory put in by a Mac certified specialist recommended to me from the Apple store in Northbrook because this was the 3rd time my drive went bad but this time it was to old (I got the IMAC- in 2007) and the Apple store could no longer work on it this time so they recommended a few places that had certified Mac specialists. Since then Numbers is not working right.
I'm sure it's something simple to fix, but I've tried re installing it and that didn't work. Appreciate any help.
Thanks
AppMareThere is one way its getting fixed. Once I update my Adobe Illustrator CC to Adobe Illustrator CC 2014 it is further allowing me to go into the system folder and allocate the font to the file so that it can replace it. My only concern now is that our MAC partners who will receive these files back from us have Adobe CS6. We will down save it to CS6 but I hope they won't experience any font issues because of us using CC 2014? Any light you can shed on this?
-
I have been working on the same numbers file for the past few weeks. The last time I opened it was 1 week ago. Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing.
Hi Tracie,
I upgraded to Maverick OS X 10.9.5, numbers spreadsheet is saved. Upon re-opening, it appears to be frozen, a warning "file is invalid as index.xml file is missing". I checked, and the file is not "locked". This appears to occur only with using the new numbers app. When I open previous spreadsheets from old iWorks, no such problem occurs.
How did you resolve your problem?
Would appreciate any help here.
Thanks,
Deehay -
I just bought a new macbook pro and my CS6 migrated, but now when I open existing documents, it launches a free trial version. There doesn't appear to be a way to enter my serial number or communicate that I simply have a new computer. HELP! There is no customer support for this. I can't believe what a poor service company Adobe is!!
The problem was that you migrated CS6. Unfortunately, migration doesn't work because it doesn't move all the files.
First, you'll need to use the Adobe Cleaner Tool to remove the components that were installed:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Second, you should install a clean copy of CS6. Here is a link:
Other downloads -
Can't open numbers documents, says index.xml file is missing?
can't open numbers documents, says index.xml file is missing
I came across this problem after upgrading to Mavericks. Here's what I did to solve the problem:
Issue: I began working on an existing spreadsheet. After I saved it and tried to pull it up again later, I got the message "index.xml file is missing...".
Go to your dock and delete the icon for Numbers (mine still referred to the previous version of Numbers).
Go to Applications and drag the Numbers icon to the dock. This icon now links to the new version of Numbers and (hopefully) your spreadsheet should work. -
I am trying to open a document I saved on a previous version of Pages, but ever since I updated, I get a message: "couldn't be opened: the required index.xml file is missing". Can anyone help me here?
Check this thread with possible answer from PeterBreis
Pages & Mavericks - "The required index.xml file is missing."
What can I do to open a pages file she I get this message"the required index.xml file is missing" ? -
I download the new Update for Pages (5.2.2)on September 8th. Now I can't open a document I created in 2012. I get message "You need a newer version of Pages to open this document" What can I do to get this doc to open
First, open Finder, go to Applications folder and delete iWork '06. Then, open Pages and it will use the most recent version
-
Using Logic Express 9.1.8 - Upgraded to Mavericks and now can't open Logic Express. Why please?
As soon as I try and open the LE application the icon starts bouncing up and down in the bottom tray and that's it. There is no more. I have to right click and force quit.
Became fed up and dragged it to the trash with the intention of reinstalling form original Logic Expres 9.0.0 disc. Couldn't install though as the installer crashes.
Don't know if this because of the "upgrade" to Mavericks but it a real coincidence.
Any help is appreciated.
ThanksWell, the first thing I would have done is launch Disk Utility and run Repair Disk Permissions. It sounds like your problem may have been a permissions error and this may have resolved it. If that didn't help I would have next gone to my user>Libary>Preferences folder and deleted "com.apple.logic.express.plist."
Next step would have been to reboot the computer in Safe Mode or create a new user account to see if LE9 would launch.
Even though you trashed LE9 I would still suggest repairing permissions at this point. Also, do a Spotlight search for Logic Express to find any remaining LE files that you might want to delete . . . primarily preference files like the .plist mentioned above. Now restart your computer and try running the installer again.
Just an FYI, LE9 will indeed work in Mavericks. I used it briefly until I decided to get rid of Mavericks and go back to 10.8.5. -
How do you retrieve a file in numbers that keeps coming up with index.xml file
I'm not able to retrieve spreadsheet I've done in Numbers..the prompt index.xml file is missing keeps popping up. Please help. This is information I've been inputting for a couple of years now. I need it.
Thank you,
SandyHi Sandy,
This reply from Fruhulda may help you. It refers to Pages, but the same methods should work in Numbers. Read the whole thread.
Re: The required index.xml file is missing.
Let me know if it works.
Regards,
Ian -
When trying to open iPhoto the computer says:
‘The photo library needs to be upgraded to work with this version of iPhoto.’
So I click ‘upgrade’
Then it says: ‘You can’t open your current photo library using this version of iPhoto.’
Etcetera...
What to do??
TheoIs your Apple Intel-based, poppelmacbook? If not, you should consider treating yourself to a new Mac. Last December I gave up my old because it just could not update...anything because it was not Intel-based. Updating everything on this OS to 10.9 has been confusing for me, but I just could not work with that old Mac because the updates were too smart? for my 10.6. It is upstairs now...for visiting family: games, garage band, etc.--things I never did use. Apple refurbished and purchase the extended warranty. Apple loyalist since late 1980's.
-
I was using Numbers '08 and just upgraded to 3.5.2 but now can't open any of my '08 files. Message says save to '09 first to open. Well, I don't have '09 so what do I do?
Or you may obtain iWork '09 DVD package from Amazon online et al. Sold at very low price now. It is really worth it. Don't forget to apply the iWork 9.0.3 updater after intalling it.
iWork 9.3
http://support.apple.com/kb/DL1563
Regards,
H -
Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.The Oracle documentation has a good overview of the options available
Generating XML Data from the Database
Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
You can also find some information in XML DB FAQ -
Can't open a document I was writing yesterday- alert says it needs a new version of pages, but I only updated it in August 2014. Help please!
You have two versions of Pages on your Mac.
Pages v5.2.2 in /Applications
Pages ’09 v4 in /Applications/iWork ’09
When you open a Pages ’09 document in the default Pages v5.2.2, it is converted to the latter exclusive, new document format, and is not directly backwards compatible with Pages ’09. You would have to use Export To > Pages ’09 in Pages v5.2.2.
If Pages ’09 is running, with/without an open window — double-clicking a Pages v5.2.2 formatted document, or attempting to open said document with the Pages ’09 document chooser, will generate the dialog you saw. It really means you cannot open this newer document format with your older version of Pages. There is nothing to download, because the cause of this dialog is simply having Pages v5.2.2 installed.
You can open actual Pages ’09 documents:
Right-click, Open with > Pages (4.3)
Via Pages ’09 document chooser
Drag/drop Pages ’09 document on the Pages ’09 Dock icon
Pages ’09 File > Open…
Pages ’09 File > Open Recent > -
We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double clicked in Mac 10.6.7 at out clients location, its not opening. For your information the client is able to open this same application by double clicking on index.swf file. The main problem is that client is not able to open the application using index.app file at their office whereas we are able to do so at our office. Can anyone give some suggestions to sort this problem?
The most common reason is different versions of Flash, or different versions of web browsers used. Some users may elect to not have Flash installed at all because of the processor overhead of Flash. If you are going to make an application for a client, check what operating system and browser versions they are using first. Then determine if a stand alone application is required, or if they have the necessary plugins to run specific browser enhanced code.
P.S. MAC is an acronym for Media Access Control. Mac is the shorthand for Macintosh, the operating system and computers made by Apple Inc. -
I have just agreed to software updates on my imac and now can't open my mail. There is a message saying this version of mail isn't compatible with this latest software. I have located the updated mail in the applications folder but it won't open. I don't have the original operating software disk. Does anyone have any suggestions?
Your reply suggests that you have moved Mail to a different location, which (as I said) will prevent it from being properly updated. You cannot use Mail 4.5 with any recent version of Mac OS X. Mac OS X 10.7 (Lion) included Mail 5 and Mac OS X 10.8 (Mountain Lion) includes Mail 6. I'm assuming that you have either Lion or Mountain Lion, but if that is incorrect, you will need to provide that information.
At this point, you will need to reinstall your system. Hold down command-R at startup and reinstall the system right on top of the old one. This should not disturb any of your documents or applications, though you should have backups beforehand in case something goes wrong. And at this point, with your system in an uncertain state (I don't entirely know what you have done to it), something could go wrong.
You will also want to delete the old copy of Mail 4.5, wherever that is. You can't use it.
In the future, do not move any of the preinstalled applications. Leave them where they are.
Maybe you are looking for
-
Usage Tracking Catalog Problem
I am trying to setup usage tracking in OBIEE running on Windows 2008. Every time I try to open the sample catalog I receive the following error: Error initializing/loading existing Catalog: D:\UsageStatistics\UsageTracking. I have tried the file from
-
Help with linking to a web page within same browser window
I just upgraded my Flash MX to CS5.5 and am completely stumped at what would appear to be the most basic of functions. I have a small Flash movie that is embedded on a site. At the end of the movie, there is a call to action to click to another page
-
Component resizing problem in Vbox
Hi.. I am facing a peculiar problem.. I have a vbox which contains 5 components, each of which has a line graph and a legend.. But all of them need not be visible at a time.. It depends on the number of parameters returned from a webservice call... s
-
Dynadock VGA - monitor suddenly freezes and disappears
OK, perhaps a bit cryptic. What happens is this: I have a Zepto Znote notebook with a GeForce 8600M graphics card. I want to use that as my only computer, but I'm 100 % dependant on a dual monitor setup in my line of work (media work with a video on
-
When I click on location in LYNC 2013 I used to get a popup asking me to set the location and at the bottom it said to see this message again click no. To turn this message off click yes. I accidentally clicked yes and now when I click location it al