Hello ~ I bought a G4 Hello ~ I bought a G4 Power Mac & had used it with a standard monitor. Somebody gave me a M8536 23" Cinema Display. I think they should be compatible. My G4 seems to be missing what I think is called an ADC connection.

Should I just buy a video card with an ADC connection?

Hi Mark,
I didn't check your link on your original post. Sorry.
There is one other model that is a 400 MHz model that will accept cards with an ADC connection port.
That's the Gigabit Ethernet model.
You do not have this model Mac.
The table in the link we both have show you what video connections the and locations for those on the back panel.
Clearly, your PowerMac doesn't have an ADC connector for the card that is already installed.
So, you can conclude that you have the AGP sawtooth model that only uses VGA or DVI connection.
You can give me your PowerMac's model number to be sure.
It's located on the back panel somewhere near all of the connections.
That'll clinch, for sure, which model you do have.
You will have to purchase an ADC to DVI adapter when you decide which card to update to per JapanMac's suggestion.
The adapter doesn't affect video performance.
Just allows for a connection change at the computer.
This is about as straightforward as this gets.
The absence of an ADC connection port means you have a Mac with a VGA and/or DVI connection instead.
An adapter will be needed to use the 23 inch monitor you have with the card you have installed now or any future video card upgrade.

Similar Messages

  • I have bought a new airport express and using it with my macbook (iTunes 10.2.2). I have joined an existing network for internet in my home and with that i am trying to play the music via itunes but there is audio dropouts every 60 secs or so. any soln ?

    I have bought a new airport express and using it with my macbook (iTunes 10.2.2). I have joined an existing wireless network for internet in my home and with that i am trying to play the music via itunes but there is audio dropouts every 60 secs or so. I am using a set of speakers from kenwood connected to the airport express. The operating system on my macbook is mac os X 10.5.8. i am sure it is not a problem of streaming music online because i have even tried playing music which are stored in my macbook.
    Is there any problem with the setting in itunes or quicktime ? Kindly reply...... I am waiting for your valuable suggestion.
    Thank you a lot in advance.

    I am shocked to have found this same AX audio dropout problem starting TODAY, every few seconds the audio just drops for a couple seconds and then resumes:  Latest software versions of everything.  No iPad, iPhone or Touch.  Internet hardwired to D-Link DES1105 (1000baseT Switch) hardwired to new 80211N AX, AX optical to stereo, AX Wi-Fi internet to basic 1st-gen MacBook operating at 80211G, and an older 'G' AX extender at the far end of the house, away from all this.  The MacBook streaming iTunes is usually 12 feet from AX.  I've used this setup for years of trouble-free AirTunes / Airplay until today.  Today I also found 2 very reliable fixes and 1 way to force a dropout, but first, I read some posts and tried ALL following settings one-at-a-time and restored them ALL because NONE of them helped:  Turned off IPV6.  Streamed to multiple speakers 'Computer' and 'AX' (restored to just AX).  Turned off 'Ask to Join new (WiFi) Networks'.  Turned off Bluetooth (can't live without Magic Trackpad, so glad that wasn't it).  Here's my discoveries:  Lo and behold, each time I click the Airport icon in the Menu (you know it shows you've got 4 bars from AX) when the status switches to 'Looking for Networks' for a second it CAUSES the AX audio to drop out for a couple seconds (it never did that before today.)  iTunes still playing, streaming, AX laser still lit, but the 'PCM' light on stereo and the sound GOES OUT EVERY time I click the Airport icon in the menubar, just like the regular, annoying dropouts.  So, to reduce traffic I quit Safari (3 tabs, no streaming, just Gmail, Google, and Netflix browsing).  Lo and behold, the dropouts stopped altogether.  No other Web apps going (not iTunes Store, Genius, Ping, nothing), so I launched Chrome to the same 3 tabs and the dropouts HAVE NOT RETURNED.  That's right, not only did simply QUITTING SAFARI cure it, and Chrome doesn't contribute to it, but I can demonstrate it just by forcing my Airport to re-scan.  Works for me, written using Chrome.  The other reliable fix is to hardwire MacBook to the Switch.  This is obviously not ideal, but Airplay audio doesn't drop out over Ethernet.  Also, in all my tests, it made no difference whether iTunes did the streaming, or Airfoil did.

  • I ran out of space on my time machine  because I bought a new I MAC to replace the old one.  So I copied the old one on the new one  and in addition to that I own a macbook.  So what should I do erase the old IMAC on my  Time capsule ? Shall I reset it?

    I ran out of space on my time machine  because I bought a new I MAC to replace the old one.  So I copied the old one on the new one  and in addition to that I own a macbook.  So what should I do erase the old IMAC on my  Time capsule ? Shall I reset it?

    Go to the airport utility and erase the TC disk.. a quick erase is fine and takes less than 1min usually.
    A one pass erase takes several hours depending on how big the hard disk is.. but is somewhat safer in that it tests the drive condition. I normally don't bother for a TM backup.
    When you start over you should be able to fit both backups on the TC.. assuming the disk is 2x larger at least than the space used on both the MB and the iMac.
    If not you can also add a USB drive to the TC, and use that for one of the computers.
    The slowest one is best.. as USB is slow.. but fast enough for wireless you won't notice much.

  • Hello, I currently own a Power Mac G5 buily in early 2005. I need HELP!

    Hello, I currently own a Power Mac G5 buily in early 2005. I can not install and run the new software that is for the Intel Mac's. I believe the early Mac Pro G5 Desktops did not have the intel CPU processors. Can anybody tell me if there a way around this problem? I wish I could run all the newer software currently available. Please only respond if you have knowledge of this.

    groovewire wrote:
     …I believe the early Mac Pro G5 Desktops did not have the intel CPU processors.“…
    Kappy's reply is 100% on target, of course, and you are right about needing the Intel chip.
    Just to clarify, though, there is no such thing as a "Mac Pro G5 Desktop".  If it is a G5, it is NOT a "Mac Pro", but a Power Mac G5.  If it were a Mac Pro, it would have an Intel CPU and it would not be a G5.

  • How do i download office mac 2008, i already have number license (i bought the disc, but can't use them with my macbook air)

    Hello!
    I'm using a MacBook Air, Processor 1.4 GHz, Memory 4 GB, Software OS X 10.9.4
    Years ago I bought office:mac 2008 with 3 licenses, and I want to use one for this MacBook. The problem is that I can't use the disc 'cause it doesn't have CD/DVD driver.
    How can I download office mac 2008 using a number license that I already have?
    Thanks!

    You might check this: Download Office 2008

  • I can not download any files, i think i by misstake put the download manager in the trash and then deleted it, what should i do? I am not so shore what the program is called in English( in Swedish:filhämtare) but it looks like a little grey box

    Hi, i really need help... I think i by accident deleted the "download manager" i´m not shore what the program is called in English ( Swedish : filhämtaren), but its symbol looks like a grey little box and when you download a file it appears on a list and is then saved in this program. I don`t know how i didn´t see it in the trash, but somehow i deleted this program by mistake. And as a consequence i can no longer open/download any files. I just got my macbook pro and i do love the system but i am now unsure about what i should do with this problem since i am not that terribly good with computers.... Is there any way you can fix this?

    soffi h wrote:
    Hi, i really need help... I think i by accident deleted the "download manager" i´m not shore what the program is called in English ( Swedish : filhämtaren), but its symbol looks like a grey little box
    If it looks like this:
    It's called an "installer.app"
    You can custom install the "installer.app" directly from your System DVD that originally came w/your computer.  It will be either inside the "Bundled Software" folder or inside the "Applications" folder.

  • Had to restore my ipod most apps have gone back on no probs but three are saying they are not compatible any suggestions please

    had to restore my ipod, most apps have gone back on with no probs but three of them saying incompatible can anyone help please

    Hi Skydiver119
    Thank you so much for taking the time to reply to my problem.
    Yes the purchases were made though my apple id.
    I have looked at a few other questions on this topic and I have read that the app data is stored in the backup file but the apps themselves need to be synced back onto the ipad. Someome has mentioned right clicking on sync my ipad but I don't know where to find that to right click on!! Lol.
    Again, I really appreciate your time and if by any chance you know where I can 'right click' I would really appreciate you letting me know as I can't get my ipad to sync with my pc at all, although it is being picked up in itunes and it has backed up to itunes okay. GGrrr. Maybe I have something wrong in the settings which is not making them compatible?

  • I will be buying an Ipod nano touch. I want it because I will use it with Nike Plus. Does Att have plans for the Ipod nano touch? If so, give me the link. Or tell me what to do.

    Please be specific.

    The Nano does have 3G or 4G capabilities nor does it have any Wi-Fi hardware and capability, so no need to worry about setting up a plan/service with AT&T.
    B-rock

  • What motherboard form factor does the power mac g5 use?

    I have an old power mac g5 case which I'd like to re purpose into my new editing pc, and I am wondering if it uses a proprietary form factor motherboard, or a standard form factor motherboard like atx, micro atx, or mini itx to know if I'd have to do some case modding or not, thanks for all replies, and I know I will need to mod the cables within the case like the power button, so no need to make note of that!  Also, I know it would take less effort just to get another case, but I'd like to work on this case.

    If you don't mind some work...
    http://build-its.blogspot.com/2011/04/how-to-fit-your-pc-in-power-mac-g5-case.ht ml
    http://www.tonymacx86.com/powermac-g5/94291-portos-g5-atx-mod-simple-way.html

  • HT201240 Hijust bought my brand new mac computer had all my files transferred from my old pc onto the new one and turn it on and it has a password to enter and get started i have tried my apple id password and another the store had written  apple default

    Hi
    Just bought my brand new mac had all my files transferred from my old pc and now i try to start and it has a password that i cant get past
    i have tried my apple password and another the dick smith store had on a piece of paper nothing works and the store isnt open easter sunday
    can anyone help
    Marj

    Resetting User Password in Lion and Mountain Lion
    Boot into your Recovery Partition by holding down the Command and R keys whilst booting.
    When the Recovery screen appears, go to the Utilities menu and open Terminal.
    In Terminal, type:
    resetpassword
    ...a small app will open and allow you to choose the user for whom you want to change the password. If you are the admin, be certain that you choose your admin user. Type in your new password twice and give yourself a good hint. Click OK (or Done or whatever) and reboot, enjoying the use of your new, hopefully memorable, password.
    Good luck,
    Clinton

  • Jaguar on Power Mac G3 what to do?

    Hello,
    I have a nice Power Mac G3 and i would like to install Mac OS 10.2. I have tried to install before but almost everything "unexpectidly quit". I have a cd-rw so i need to install patchburn (unless you have another sugesstion, i do not know what brand the cd-rw is) I will also have to install "wireless card bus" app for my belkin wireless f5d7000 (version 3000). so is there a firmware i need to install before i do anything. I do not have mac os 9 on it. please take me step by step to install 10.2. Thanks!
    TheMacGuy 12

    step by step to install 10.2
    • First, assume that 10.2 hates you, and thinks your dog is ugly, too. It will not be polite or cooperative. If your Mac goes to sleep or you try to install too much at once, or you do not repair permissions often during the update process, it will fail.
    • Remove any PCI cards that did not ship in your Mac. Reduce the memory below 192 MB, preferably all Apple original.
    • Open the Energy Saver Control Panel and set Sleep to Never.
    • Insert the Mac OS X Install CD and click on the Install Mac OS X (or similar) Icon. Your Mac should restart, boot from the CD, and bring up the Install Opening Screen, inviting you to choose English or another language.
    At this point, If you need to use Disk Utility, it is available on the Installer Menu. Remember that re-partitioning your Hard Drive will Erase your Hard drive. But partitions can be erased individually using Disk Utility, and some users insist they have better luck installing 10.2 on its own newly-erased partition. It is not proven.
    • De-select the extraneous languages and Printer Drivers you do not need, and any Applications you know you will never use. Proceed with the installation.
    • After the installed stuff is automatically optimized, your Mac will re-boot from the newly-installed image on the Hard drive. Sometimes it gets lost at this step and has to be led back to re-boot from the newly-installed image on the Hard Drive. It should enter the Set-up program to establish the Owner account and set various parameters. [In 10.3, it did not all fit on one CD, so after your Mac re-boots, there is still more installing to do, and a CD swap is required.]
    • Set Energy Saver settings to Sleep Never. You should assume that permissions are corrupted. At your earliest opportunity, run Disk Utility and Repair Permissions.
    • If you want to bring your Mac up to 10.2.8, apply the 10.2.8 Combo update [only] and then Repair Permissions.
    • Apply additional updates a few at a time and Repair Permissions after each batch.
    • Once you can run the version of Mac OS X 10.2 you desire, you are free to add your removed Hardware back in, and install any additional drivers you may need.
    That's my version of what to do. Be sure to read the directions in the read-me files that come with it, too.

  • My IPhone 4's mailing feature does not display the toolbar at the bottom for deleting, moving, or writing emails. What is wrong with it?

    My work recently decided to buy every full time employee an IPhone 4 to be used for work purposes. (I do suspect these are refurbished, but I don't think that matters) I have had no trouble with it, except for on occasion the mailing feature does not display the toolbar at the bottom for deleting, moving, or writing emails. You know what I'm talking about...that bar at the bottom of the mailbox when you open an email that you use to delete, respond, forward, move, etc. It just goes away for no reason, and then reappears for a day or two, and goes away again. It is quite annoying since I can't respond to any of my emails without getting on my work computer. If you have any suggestions, please help!

    Hi there,
    You may need to force close the Mail application when this happens. The next time this happens, use the steps in the article below to coles out of the mail application.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Hope that helps,
    - Griff W.

  • What happened to the 30 inch Cinema display?

    What happened to the 30 inch Cinema display?
    I went into the Apple store to purchase one, all they had was the (too small) 27 inch with the ugly black border.
    I did find a few used 30 inch Cinema displays on ebay, they are over $1100 USED.
    Any suggestions, for a 30 inch display?

    No suggestions, apart from changing to a non-Apple display such as a LaCie one.
    I think Apple really makes a mistake with the new displays - they are nifty, granted, if you want to watch TV or the like, but they'll loose the professionals, working all day long with their displays.
    1. the new displays have an excellent resolution, no trouble there, but they are like mirrors, reflecting lamps, etc. and very tiring for the eyes. That's already a problem with my MacBook Pro but I've got to accept it - what else is there to do - and fortunately it's only my secondary system.
    2. we have gotten used to 30" and do not want to downgrade.
    I am a translator and need to work with technical plants and several open files, so 30" really helped facilitate work. And now that's all gone as the 27" display definitely is not up to scratch for day-long work...
    I ordered a 30" display right when it became available, so it's quite old now. I worry what I'll do when it breaks down ...
    Suzanne

  • Hello I have a 4 yo mac desktop..I bought a new iphone s and wanted to use it with my itunes. It required the new version of itunes be downloaded to my mac so I did so but when I try to install it it requires version 10.8 or better?

    Hello,
    I have a 4 yo mac desktop system unkown i downloaded latest version of itunes for use with my iphone5s but when I try to install I get an error message reads" requires ox 10.6.8 or better be installed?....stystem update check shows no updates available.....help

    Get more information about your computer. Go to the Apple in the upper left corner of any window, then  "About This Mac".  Write down what it says about "version"and report that here.  Now continue to "More Info..."  Copy and paste the information here, but omit the serial number and Hardware UUID (if present).
    If you have a PPC Mac you cannot sync your idevice without a newer computer.  See the end of this post for options.
    If it says you have an Intel Mac you can upgrade to Snow Leopard (if you don't already have it -- OS 10.6), but check system requirements first:
    Snow Leopard 10.6 Technical Requirements - http://support.apple.com/kb/SP575
    You can buy Snow Leopard at:
    Snow Leopard disc source - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    After installing, or if you already have some lower 10.6 version, run the updater to 10.6.8, then upgrade iTunes.
    Jan. 2014 post by Kappy on doing all this: https://discussions.apple.com/message/24599931

  • HT201272 You seems not to understand what I mean and what I'm having like problem. I still have my payment recut  from October of this year when I bought 9 songs in the iTunes Store from my iPhone 4S. The problem is from all the 9 songs, 7 are still avail

    You seems not to understand what I mean and what I'm having like problem. I still have my payment receipt  from October of this year when I bought 9 songs in the iTunes Store from my iPhone 4S. The problem is from all the 9 songs I've paid for, only 7 are still available from this list on my iPhone. There is no possibility to download the other 2 without paying for them. I've spoke to the lady from Mississippi on the phone 2 days ago from about 2 hours calling from Belgium but unfortunately she couldn't help me. It's the 3rd time I complain about this. How many time shall I pay for the same songs?? If you can access my music list and my past receipts payment you will be able to find out what I mean. I went back on iTunes I've found the the songs I already downloaded in October that should be on my playlist but if I click on them it will charge me again 0,99 cents. It's been 3 years I've been using the same apple ID with my iPhones. I just wand to get my songs back without having to pay them twice or 3 times

    1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
    2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
    tt2

Maybe you are looking for

  • Some folder contents not showing in Bridge CS3

    Some folders will not display in any way in Bridge. It does not seem to matter whether they are Jpeg or RAW files. Other folders on the same internal drive show fine. Tried several options with no luck.

  • In a JSP how can access an XML where the XML is present in JAR file in the

    All, The Requirement is as below, I have a JSP LaunchMe.jsp, and I have a jar utils.jar. both are present in my deployable war file. And I have an XML Details.XML present in the utils.jar file. Here I want to access Details.xml in the LaunchMe.jsp. C

  • Photoshop CC stopped working after update

    I just downloaded an update to Photoshop CC on Windows 8.1 Pro. I now get the following message. The procedure entrypont could not be found in the dynamic link library C:\ProgramFiles]\Adobe\AdobePhotoshopCC\Photoshop.exe

  • Scanning in Adobe Acrobat Professional 8

    I have Windows XP - Adobe Acrobat Professional 8 - a Brother MFC-465CN printer scanner. When I want to create a .pdf from the scanner the Adobe program closes down. No error message. I can scan in other programs such as Photoshop etc.

  • Switching between widescreen and 4:3

    I originally setup a project in 16:9 format. And at a later date, realized it needed to be 4:3. It seemed like iMovie switched it over as I simply selected to convert it through the pulldown. But when I go to reburn and play the dvd on a regular 4:3