Hello, I cannot get my computer or i tunes to recognize my iphone.
Hallo, I cannot get my computer or i tunes to recognize my iphone. I´ve got a Lenovo and iPhone 5. Thanks for help
With the phone connected to the PC via the USB cable, can you see the phone when you do Start - Devices and Printers on your PC ?
If you can - right click on the phone icon it is showing and go for "troubleshooting"
Similar Messages
-
I just installed OS X Yosemite on my MacBook. I now cannot get the computer to start up. If I hold down the power button to try and power it back up, it will not start. Any ideas on how to fix this?
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Download and install the OS X Yosemite 10.10.3 Combo Update.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
I keep getting an error message that says that the hard drive cannot be repaired. Therefore I cannot get the computer to start up.
It doesn't sound like you are doing anything incorrectly from what I can see. Have you tried restarting the iPad and then see if you can backup?
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. -
TS1363 hello, I cannot get my itunes to recognize my iphone, pleas help
Hello, I cannot get my Itunes software to recognize my iphone. my pc recognizes it in windows explorer
Hello, gonz1113.
Thank you for visiting Apple Support Communities.
If your device is not recognized by iTunes, I would recommend the steps in the article below. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H. -
I just upgraded my os to snowleapard now i cannot get my computer to connect to my aircard help
I just upgraded my os to snow leapard and now i cannot get my computer to connect to the aircard
i found out my new os did not work with the access manual i had with my mifi 2200 air card so i had to go to a verizon corp store and get a cd to upgrade my access manual for it to work with my system to connect and recognize my mifi 2200 i thought i would tell this due to someone out there may need same information.
-
I cannot get my itunes of app store applications on my iphone to load. I have restored the phone, but that did not work. They just say loading fore a long time
Maybe you'd have to contact an Apple Store or the carrier who handles
the phone, about how to reset it. There should be some helpful motions
and efforts to attempt to re-connect the vehicle to the iPhone, there.
Perhaps there's a firmware update for the vehicle at an authorized agency...
Looking ahead, when looking into newer 2015+ models, test with a phone.
Good luck & happy computing! -
I am trying to get the music content in iTunes on my Mac onto my iPhone. When I connect the devices, the computer does not seen to recognize the iPhone. i.e., on the open iTunes window, the iPhone is not seen as a connected "device".
Hi,
See Here
iPhone, iPad, or iPod touch not appearing in iTunes
From Here
http://www.apple.com/support/itunes/devices/
Also...
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538 -
I have an iMac with 10.9.1 and an iPhone 5 also updated to the newest system and I cannot get a sync set up between Ical and the iPhone or Outlook 2011 mac calendar with the iphone. I would perfer using outlook but will settle for the Imac calendar
It depends on what iMac you have. If it is an old PPC (G4 orG5) iMac then no further upgrades are possible. If it an Intel iMac:
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
(NB: PowerPC applications can still be run in Snow Leopard using Rosetta, but they will not work in later versions of OS X.)
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether any further updates are required, particularly to iTunes.
You should now see the App Store icon in iTunes, and you now need to set up your account:
http://support.apple.com/kb/HT4479
You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac Mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
iCloud system requirements:
http://support.apple.com/kb/ht4759
If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
http://store.apple.com/us/product/D6106Z/A/os-x-lion
or Mountain Lion:
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion -
cannot get new ipad to message or facetime using my iphone number. Will only allow messaging and facetime with my email address
Using FaceTime > http://support.apple.com/kb/ht4319
Troubleshooting FaceTime
iOS http://support.apple.com/kb/TS3367
About Messages
Troubleshooting Messages
http://support.apple.com/kb/TS2755 -
Request through http, but I cannot get a Computer certificate
Hello,
From a client I type in my browser: http://dc1/certsrv.
Then I get to a screen where I can choose among these certificates: User, Basic EFS, Administrator....and a few more ; but I don't see "Computer certificate" in that list.
Does anyone know how could I get a Computer certificate from that web site ?.
As far as I know, one can add entries to that list, but not sure how to do it.
Thanks in advance!
Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain)Computer certificate enrollment in web pages is deprecated since Windows Vista. Instead, you should use Certificates MMC snap-in focused on Local Machine context to enroll computer certificates.
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell FCIV tool. -
I cannot get the ipod (older model) to be recognied on my computer operating system 7. It does not light the ipod up or tell me it is even connected with the device update. I don't know what to do. We lost all our music on our old computer that crashed. We just want to back up the ipod so we don't lose 2300 songs. Don't want to start over. Any suggestions on what to do
What did the error message say?
What happens when your you connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software -
I need help I cannot get my Dell Windows 7 74 bit Laptop to recognise my I Pad 32 +wi fi.
Any suggestions.PleaseDevice not recognized
1. Do you have the latest version of iTunes on your computer
2. Try different USB port on your computer
Windows :
http://support.apple.com/kb/TS1538
Mac :
http://support.apple.com/kb/TS1591 -
Can't get my computer to recognise my ipod
See:
iOS: Device not recognized in iTunes for Windows
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. The Sidebar is when you will see the iPod under Devices. You can also do a Crtl+S to show the sidebar and Control+B to show the Menu bar -
I cannot get my computer out of target disk mode
I had my G4 power Mac (10.4.11) connected in Target Disk Mode to my new Mac Mini (10.7.3) to migrate the file from it to the new Mini. Now I cannot get the old machine to go back into startup disk mode, it is staying in Targer Disk Mode. Any ideas how to bring my G4 back to life?
I followed suggestion and it worked. Zapping the PRAM still has it's uses! I'm cured, thanks guys!
-
I cannot get my computer to reinstall the Apple Mobile Device USB software.
Originally, I updated my Itunes and after that, it would not recognize my iphone anymore. So after that, while following directions on the Apple support page, I tried to uninstall and then reinstall the Apple Mobile Device USB software. It uninstalled fine, but when I tried to put it back, it just kept telling me that the device could not be successfully installed. How do I get it to install?
Morning Bugsy7238,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If the Apple Mobile Device USB Driver is not listed
Disconnect the device from the computer.
Save a screenshot by pressing the Home button and the Wake/Sleep button at the same time (the screen should flash briefly). Note: Taking screenshots and saving images on iPod touch requires iOS version 2.0 or later.
Reconnect the device to the computer.
Open the Device Manager in Windows as follows:
Windows XP: Click Start > Run. In the resulting dialog type devmgmt.msc and press Return.
Windows Vista or Windows 7: Click Start. In the dialog, type devmgmt.msc and press Return. If Windows needs your permission to continue, click "Continue".
Windows 8: Move the cursor to the upper right corner, click the magnifying glass, type devmgmt.msc, and press Return.
Expand all the sections labeled below (not all sections may be listed):
Imaging Devices
Other Devices
Portable Devices
Universal Serial Bus Controllers
Look for the entry that recognizes the device as a camera. This entry should be called Apple iPhone,Apple iPad, or Apple iPod.
If only "Unknown Device" appears
If only Apple iPhone, Apple iPad, or Apple iPod appears
Best of luck,
Mario
Maybe you are looking for
-
Splitting and executing the query for each 1 lac and executing parallel.
Hi All, We have a table with around 10 keys and each key is having more than millions of records for a given date. And my requirement is to find the sum of the sale_price of each keys. ( example : Select key, sum(sale_price) from table1 where date1=s
-
I get a -43 error when updating I tunes account
Every time I try to update to the newest iOS I get an error -43 during the backup phase. No explanation or any details.
-
Emtpy 'AppModel' in workspace (after include frompublicplans)
Hi, I just do 'rpcreate -fr bt:myrepos', I create a workspace I include the 'AppModel' from the baseline (includepublicplan) and that plan appears to be empty. Do I need a parameter for rpcreate ? When I try to import a model, I got this: (14) CMD: I
-
How to set profile option to oa page
hello In my application a oa page is there and 3 levels of people accessing this page. I want restrict the data for one level is editable and one level is view only .How can i implement this thing by single page and three responsibilities
-
Option to join two dataproviders
Hi, I hope this is sent to the right forum. This is a question where I believe that the answer is "no - not possible" but I would really like it to be "yes it is possible". Can anyone confirm my assumptions? Does anyone else feel this should be on a