Hello, I get DROPS when digitizing from FCP onto my XRaid

Well, sure I´m doing something bad, because I get drops exactly every 30 Secs when digitizing in the raid.The configuration is XRaid with 4x500 in one controller RAID5 and 3x500 in the other RAID5, then a stripped raid with both (so is raid50 isn´t it?). The firmware is 1.5, and the caches are enabled (I suposse are the checkboxes inside settings in the RAID Admin program). The thing is that when I digitize material whichever source it is (betacam, DVC, SDI), I get the image freezed a couple of times in a moment and then goes on, and this happens EXACTLY EVERY 30SECS, isn´t weird?. I suposse is something in the raid configuration. The program is FCP and the card is Blackmagic extreme, and digitize is in the 10 bits setting. Ah, and if I digitize the same onto the internal 200Gb disk all goes fine.
Please, can somebody help me?
Thank you very much

Ah, and just add that this raid is connected to a G5, and when I run the blackmagic speed test it goes from 220 Gb/s in read and 170 in record, so it seems to be ok. thanks

Similar Messages

Poor Quality When Imported From FCP

Hello I have been having issues when importing a QT files into After Effects. When exported from FCP and imported into After Effects the footage loses significant quality, maybe a little interlaced. Ive checked and double checked fields, Im exporting in animation. Ive done both QT movie and QT conversion with the same result. Also it happens with files exported from FCP from other computers. Ive checked export settings & coposition settings. Any Ideas?
Thanks

bogiesan wrote:
-DWS- wrote:
Thanks. That is what makes the most sense to me. How do I elect how After Effects interprets the footage? I went to preferences but couldn't find anything that fixed the problem there.
See the help system for Interpret Footage.
It's a right-click dropdown form the project pane. Select a footage item, Interpret Footage.
Thank you Lower Fields first was selected

I keep getting errors when updating from the Creative Cloud (49)

I keep getting errors when updating from the Creative Cloud (49).
" Update Failed" and when I click on Learn More. The error messages says there is a download error with (49) I am signed on as administrator, so that shouldn't be a problem. I have Windows 7.

Error 49 https://forums.adobe.com/thread/1491394
-and https://forums.adobe.com/thread/1353632
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Where XML and related file belong when send from FCP to Color?

Hi(Bonjour)!
Where XML and related file belong when send from FCP to Color?
I want to start a fresh project and delete all previous tests.
Michel Boissonneault

Hi(Bonjour)!
I messed up with preference for home directory.
Thank you.
Michel Boissonneault

My sequence will not show up in Color 1.5.3 when sent from FCP 7

I cannot get clips from FCP 7 to show up when sent to Color. I had been able to get this to work perfectly fine earlier, but now for some reason, when sending a sequence from FCP to Color, Color doesn't automatically create a new project with the sequence in it. I've Googled for answers as much as I can, but cannot figure out what's going wrong.
By the way, the footage is from a Canon 7D, imported into FCP from PluralEyes 8.
EDIT: I've tried to manually export the XML from Final Cut into Color. Color will not even recognize the exported XML file. I've done what others have suggested online and deleted my Color & FCP preferences files out of my User/Library. I've created new FCP projects and tried to send to color from a new project. None of these have helped at all.

I just had this exact same problem. Clips from my FCP 7 sequence would not show up when I sent them to Color 1.5. No way. No how.
I solved my problem (at least for now) by simply restarting my machine. I realized that it had been running for days, and it probably just needed a reboot. Try it. It might work.
And yes, I'm running Mountain Lion, too. 10.8.2.
Good luck! ----Todd Ruel

Error when exporting from FCP

When I try and export to Compressor(1.2.1) from FCP HD 4.5 i get an error saying that a file of this name already exists (obviously not the case). The Batch then fails within 5 secs or so. Could this be a restriction on the academic version of fcp or something - ie one can only export a project x many times or something? i've seen the related string but turning off anti-virus software doesn't seem to help me at all. any ideas?
also - I can export as a self containded qt file but even if I do it at the highest settings the finished dvd (made using dvd studio4) doesn't look as good as an old dvd i have that was encoded by exporting to comp. from fcp. is it just my eyes having seen the video so many times that i am seeing things or has anyone else noticed this?

there's also reports of incompatibility with compressor3:
http://discussions.apple.com/thread.jspa?messageID=4968107&#4968107

QMaster Settings, And Freezes When Rendering From FCP

I have a Octo Mac Pro and I setting the settings in QMaster to 12 intances, and even 8 for cluster renderings. When I tried to render a clip from FCP to Compressor, it freezes in the Batch Monitor at like 50% and stops? Has anybody else had this problem? What are the best settings in Qmaster to get good results ? Sweet spot? Instances settings etc.? for Cluster renderings?
Thanks TimC

See kenstone.net for some articles on the topic of optimizing Qmaster.
But freezing usually indicates a different kind of problem, probably associated with your source movie or the amount of space on the target drive.
bogiesan

Do photos get resized when sending from PSE 6 to PE 4?

Do photos get resized when moving them from PSE 6 to PE4?
I've come to understand that using overly large photos in slide shows in PE 4 can cause lots of issues, and its recommended to resize photos to 1000x750 (http://www.adobeforums.com/webx/.3bb8822c) before including them in a slide show in PE4. I'm trying to understand the implications of working with photos in PSE 6 and then moving to PE 4 vs. just doing it directly in PE 4.
I can imagine (at least) two scenarios:
1. I have all my photos in PE6 and want to work ONLY in PE4. I'm guessing i would resize my photos in the PSE 6 Organizer by using File-->Export and picking a smaller file size (e.g., 1024 x 768) and then import them into PE4 and build my slide show there.
2. I have all my photos in PSE 6 and want to to create a slide show there and then move it to PE 4 to touch it up or do some fancy stuff to it. Will the photos be resized so PE 4 won't have trouble with them or do i need to resize them in PSE 6, reimport them into PSE 6, build the slide show, and THEN send it to PE 4?

eric,
See my post over at http://www.adobeforums.com/webx/.59b85fd0/4
for reasons why I think that for your current objectives, working in Premiere Elements (rather than making a slide show in PSE) will be a better choice.
>1. I have all my photos in PE6 and want to work ONLY in PE4. I'm guessing i would resize my photos in the PSE 6 Organizer by using File-->Export and picking a smaller file size (e.g., 1024 x 768) and then import them into PE4 and build my slide show there.
Yes.
A couple of considerations
1- Where will you establish the sequence of the photos in the slide show?
Are you making an Album in PSE 6 in order to establish the sequence of the slides as you are selecting which photos to use? if YES, we can experiment with sending the photo files in their Album sequence to Premiere Elements.
Or will you establish the sequence of the photos within Premiere Elements?
2- When working in Premiere Elements will you be able to do the 600 slides in a single PE project?
I don't know the answer to this: it will be influenced by your system configuration.

Printed photos from Aperture 3.2.1 have lines through them - don't get that when printing from iPhoto

I recently downloaded Aperture 3.2.1 and after editing a couple photos (love that process!), tried to print them. Both had horizontal lines across the entire photo. I don't have this problem when printing from iPhoto.
As an FYI, I have this problem when printing from PSE too, but worked around it by importing edited photo back into iPhoto and printing from there. I don't want to do that with Aperture, because they have much better printing choices.
I have a Canon MP 500 & a Canon IP 4300 - same issue with either one.
I contacted Canon tech support and got this reply:
We appreciate your correspondence regarding your PIXMA MP500. I am sorry that lines are printing through photos printed from aperture.
If aperture is the only program the issue occurs with then the print setting in aperture will need to be changed. You will need to use the icc profiles for the paper you are using. For details changing the print preferences in aperture please goto: http://www.redrivercatalog.com/profiles/how-to-use-icc-color-printer-profiles-ap erture-3-canon.html
I looked at the link and basically had a brain freeze. It was very complex, and I was concerned that it was for Red River papers - I use HP paper.
I called HP to get their instructions for icc color printer profiles - complete zero. They said it's a printer issue and would be happy to sell me a HP printer.
Please, can anyone help a struggling Aperture newbie? I'm so frustrated.
Thanks - Jma

Hello Kirby,
Your recap is correct. I ran Apple Software Update and both programs are up to date. I looked on Canon's site and there are no new firmware updates for either printer.
When I select "print" in Aperture, I've selected the Canon MP500. Under the "Rendering" section, the color profile offers six different selections that include the MP500. I've tried them all. They all have lines through them. There is a note, in grey, beneath the Color Profile box, that says to "Turn off color management in the printer driver". I have absolutely no idea how to do that, and I've googled it, to no avail
Under "Render Intent" I've tried both selections - Relative Colorimetric and Perceptual. Still, lines through both.
This is really discouraging. Both printers work perfectly fine - with iPhoto, so it's hard for me to justify buying a new printer. And how do I know I wouldn't have the same problem with a new printer?
Fingers crossed that this can be resolved. I have several photos I'm supposed to be printing for gifts. And if the problem is in Aperture or PSE, won't the lines still be there even if I use one of the online printing companies?

Cant get anything to render from FCP X through Compressor

Everything I send from FCP to Compressor gives the error 2045 after rendering.
Can anyone help?

You're using Compressor 4 right?
I think there was and issue with the FX Factory plugin. You can look in Library/Plugins. If you see it just remove it and try again.
You can also try exporting from FCPX to ProRes and manually running the ProRes file through compressor. See if you get the same error.
I think 2045 is just a generic compressor failed code. Unless someone know what it means.

Video does not play when imported from FCP

When I import a clip from FCP into motion the clip opens up however only one frame shows up in the motion viewer. When I press play, there is no video..only that particular frame that was showing.
The media tab shows the .mov file, and plays it in seperate window when i double click on it.
Thanks for helping me out.

How do you bring the file into Motion and what file are you actually opening in Motion?
Are you exporting your FCP project as QT? or
Are you sending your FCP project to Motion?
Regards,
Hisham

AD HOC Conferencing. Customer gets dropped when Agent leaves call.

We have the conferencing setup so that the conference only ends when Onnet agents leave the conference. For some reason an agent conferences in a supervisor and then leaves the call which then drops the customer. It is not with every call. DSP resources are hardware and very plentiful. The phones being used are 7942's. The BiB is turned on and no MRGL are associated to the phone level. I am not sure why a customer is getting dropped.. RTMT shows plenty of DSP resources and CM has the correct service parameter. Can anybody lead me the right way?

So I think this has to do with CVP warm transfers. The script has network transfer set to 0 and a send to vru node in it. This is clearly a signalling problem. Probably going to have to start a TAC case.

Compressor crashes when opened from fcp

Hi there,
Im wondering if anyone can help solve this prob as yet tech support hasn't been able to.
When I try exporting using compressor from fcp both programs stop responding and I have to force quit them both. Exporting an qt movie or any other quick time conversion works fine.
My versions are fcp 5.1.2 & compressor 2.3
Thanks for your help.
Lach

I use to always have this problem. I reinstalled everything, and I;m not sure if that worked. What I do now is restart the computer before I go to Compressor. Only have that sequence open thatyou are exporting and that should work.
Although it could be a corrupt file (which happened to me)

Clips don't show up when sent from FCP

I have a project that is just straight footage, no cuts, edits, nothing. I put my footage on a sequence and do "send to" on the sequence to Color from FCP. Color opens, but there is no footage or clips. It's as if I just opened Color with no project.
I'm confused because I did this before on my last project and everything worked fine. But now, even if I try to do "send to" on my sequence when it only has one 10 second clip on it, the only thing that happens is Color opens with no project. All I see is a blank timeline.

Color's settings to default?
as in "trash preferences"? Not the same as Final Cut Pro.
An empty project seems to point to a broken import path. Can you create an explicit XML export of your Final Cut sequence and open that in COLOR? (Essentially a manual 'Send to..')
There's no '/' in the clip name? There are some characters that will mislead an XML into path corruption... in fact, most punctuation except -, _, and very few others, is illegal.
Your media isn't a still or freeze of some kind? That would be a perfect example, if it carried a filter or transition -- that is where XML round trips go to die.
jPo

Missing audio when sending from FCP

When I send my project to Soundtrack Pro from FCP, Soundtrack opens and loads everything up, but oddly some audio clips show no waveform, and contain no sound, but the sound is clearly present and working in FCP.
What could be causing this?

mrjam, I am having the same exact problem. I have a sequence in FCP and am using the "send to "Soundtrack Pro Multitrack Project" command. I have tried this almost 30 times now and only twice has it worked properly, i have no clue what was different these two time and tried to repeat the process the exact same way to no avail. What a pain. I have no clue why this function doesn't work. I have a mono pair in FCP and when i "Send to.." there are no waveforms in STP at all, and of course, no audio. Funny thing is it did work twice! Sounds like a major bug! Have you had any luck?

Hello, I get DROPS when digitizing from FCP onto my XRaid

Similar Messages

Maybe you are looking for