Hello, I have a big problem after a big bug on my iphone 5

hello, I have a big problem after a big bug on my iphone 5 it asks me to restore only impossible but it gives me error 27, 47, 4013 I do not understand all my iphone is not jailbroken but for some time the screen is full of stripes do all colors and off. Sorry for the mistakes, I m french. Thank you.

Hi there Julienx76,
You may find the troubleshooting steps in the article below helpful.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
-Griff W.

Similar Messages

Hello,i have been finding problem to even open itunes.i know what have installed now is latest version and i could not open itunes in my laptop which resulted in big frustration.can anybody step in to help me for which i will be thankful to you.

Hello,i have been finding problem to even open itunes.i know what have installed now is latest version and i could not open itunes in my laptop which resulted in big frustration.can anybody step in to help me for which i will be thankful to you.when i double click itunes software,it never responds even with or without iphone 4s connection with my windows 7 laptop.

miraculous...i downloaded quicktime player from apple website and then i run it.upon double click on this quick time player and then i double clicked on itunes...there comes an enry of itunes software...now i am completely enjoying my musics.photos in smart phone.
Thanks a Lot

Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring,so i open cimcas now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks

Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring.So i poen simcase and now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks

As far as trying to power up your device, make sure it has a good charge and then hold the button on the top of the phone and the home button on the faceplate together until the apple appears on the screen.

Hello I have encounted a problem with Photoshop. Normally when you start a new documant, you are given the options to have A4, A3, ect page set ups. These inbuilt page set ups seem to have disapeared, does anyone please know how to fix this? Many thanks

Hello I have encounted a problem with Photoshop. Normally when you start a new documant, you are given the options to have A4, A3, ect page set ups. These inbuilt page set ups seem to have disapeared, does anyone please know how to fix this? Many thanks Ben [email protected]

Hello Trevor
Thanks for your message. You can custom set pages but there are no preset of page sizes like A4, A3, ect. I cannot click the size preference, nothing comes up
Ben

Hello, I have a little problem with my ipod (3rd generation): I restored my iPod because of problems of wi-fi, then synced my music on itunes and then on my ipod. The problem is that I still do not have wi-fi and my ipod says I have no music. Help me!

Hello, I have a little problem with my ipod (3rd generation): I restored my iPod because of problems of wi-fi, then synced my music on itunes and then on my ipod. The problem is that I still do not have wi-fi and my ipod says I have no music. Help me!

No. In fact, my ipod detects the livebox and the network but I can not connect to the internet.

HT6117 I don't have Safary and facetime after update with IOS 7 my Iphone 4S, and sometimes the Wife is no able.

I don't have Safary and facetime after update with IOS 7 my Iphone 4S, and sometimes the Wife is no able.

Howdy syafiqahmad,
If your iMessage and FaceTime still hasn't activated by now, I would recommend you use this specific section of the following article as long as you verify you've done all the other troubleshooting from it for this issue:
If you get an error when trying to activate iMessage or FaceTime
If you're using an iPhone, contact your carrier to make sure that you can receive SMS messages.
Contact Apple Support.
Thank you for using Apple Support Communities.
Take care,
Sterling

BIG...BIG PROBLEM After upgrade to 1.0.4

After upgrade ok for XDCAM ISSUE but now PREVIEW Monitor is black. Only some ramdom color noise(like a minimal style-pencil contour of images on timeline with black screen under)
Little preview monitor in Secondary work well. Preview Monitor not work on: Single monitor, dual monitor, full e quarter modality. Is a big..big problem. Apart XDCAM issue before upgrade no problems on Preview Monitor

You might be better off rolling back to 1.0.2. XDCAM HD seemed pretty stable with that version. We use XDCAM HD as our primary acquisition format and have no plans on upgrading Color past 1.0.2 anytime in the near future.
Run a Google search for an app called "FCS Remover". Use that to uninstall Color. Follow the directions on this page for steps on how to reinstall just Color (yes, I know that this link talks about Compressor and QMaster, just substitute those apps with Color).
http://www.digitalrebellion.com/blog/posts/howto_reinstall_compressor_andqmaster.html
Once Color has been reinstalled, go to my public iDisk folder and download the 1.0.2 update:
http://public.me.com/michaeltrauffer/Final%20Cut%20Installers

I have a internet problem- after updating to v.40 ...

hello guys,
yesterday i update my phone to version 40, and i have a critical problem..
when i open an application or "opera mini" for example, it doesnt ask for internet connections (WIFI, WAP, 3G INTERNET). in version 30,31 it was automatic ask me. i dont know what to do, cause all the applications with internet doesnt work for me,
*when i have a WIFI connection in the erea, its automatic connecting to this one.
whats weird? with the original explorer on the phone- it works! all is fine, no problems.
i didnt change any settings at all, i tried to reinstall things same in C device and i have this problem too, so i dont thing its a problem of the memory card.
i need help, its importent for me..
sorry for the poor english.
good day !

Goto-- Settings-- Connectivity-- Destinations--- remove default & set default as Always Ask option..
-Sam
Hit Kudos to show your appreciation.

Big problems after upgrade - AltGr working like as enter...

Hello, toda I have upgraded my Arch. First, I can't run X-session, in log I found something about parse error in conf file. I deleted bad line and runed KDEmod. I have problem with tray, because I don't see some icons, everything is invisible. Thats make really hard to use computer . Thi bigest problem is, when I press AltGr it works like enter. It's really bad because I am web developer and I need special symbols. I need to fix this problems fast...
Really thanks for help!

Please,
my problem isn't xorg configuration. My problem is keyboard. I have the bigger problem and it is a keyboard... My cursor arrows not runing. I can't work with console... My AltGr doesn't work, so I can't work. I tried to remove .kde4 in my home directory but it still don't work... Please, is there some log or something what will help? I need solution... I don't want to get Ubuntu again...

Problems after ios 6.1 update on iphone 4s

Hi all,
Since I've updated my iphone 4s, with the new ios 6.1, it happens that often closes suddenly the activities.
Anyone of you have the same problem?
Thanks.
Raffaella

I hope so sir. It's the iTunes Store itself that won't even open on my 4. I just bought a new phone..it's not the same as my 4.. I just want them to fix it, everything just got worse after the update that was supposed to fix the bugs, and my moms phone that I'm on now...she's going to be mad as **** in the morning that I did the update..

Big problem after updating to 14.2.A.1.136

Hello everyone,
Yesterday I updated my Xperia Z1 to this version 14.2.A.1.136 Android version 4.3
I have done this update through my PC because this update was not available on my phone.
But after i have successfully done this update and have followed all the steps.
Does my Xperia Z1 weird yesterday went on the Internet after 5 minutes was my 3G internet off while people who were in close did have internet via 3G i turned my phone off and on again and i have internet again,
And today I was listening music through the youtube app with my headphone Sony BTN200
after 2 minutes listening music I had no sound and my phone began to vibrate and he would not stop but the music continued to play and had no sound I have closed all apps but the vibration function keeps shaking, Then I turned off my phone and i turned it on again then he began to function normally.
I had this sound problem before but that was the internal speakers but the music kept on playing but no sound. i was listening music through the Walkman app.
Same story i turned it on again then he began to function normally.
My question is how can I turn my old version back? because this new version is full of problems.
sorry my english is a little bad i hope you understand me

I suggest you either try and repair your actual software via sony update service or you downgrade:
http://talk.sonymobile.com/t5/Xperia-Z-ZL-ZR/How-to-manually-update-downgrade-root-2013-Xperias/m-p/...
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Big problems after hard drive failure - Please help.

About 2 weeks ago, my Macbook seized, and was sent to Apple to repair.
It was found that the hard drive failed, and 2 weeks later I received my macbook back with a new hard drive.
Luckily I had backed up my home drive and was able to restore it using backup.
Now this is where my problems start.
My home drive is not the same name ( I think - I can'r remember too well what it was called previously )
I have my entire music library backed up to an external hard drive, and mounting this hard drive is a REAL pain in the *** now.
Sometime it loads up, sometime it just doesn;t get recognised, and I can put the USB connection in and out 10 times before it mounts.
I have verified the disk, and nothing is wrong.
Does anyone know what this problen could be ?
I have left the external hard drive in during the night, and after the macbook goes to sleep, I will go back to it in the morning, and the hard drive has been unmounted, and I repeat the exercise over again of trying to mount the drive.
Its so annoying, and I just dont know wht to do.
If anyone can help, I;d really appreciate it.
Griff

SMART status is a pretty reliable indicator of what is going on. You should back up your irreplaceable files as soon as possible.

Big problem after updating!

Hi.. It all happened After updating my z1 yesterday, after that suddenly the media stopped working, the album and the movies stopped responding...every time when i try to open one of them it tells me ''unfortunately album\movies stopped working''
SO..I hope someone could help me with this.

My Sony Z1 is giving me hard time listing to my music in the Walkman app it just plays music for about 15sec and then no sound and the timer of the song keeps on going.
Then just freezes my whole phone.
I tried many things to try solved it but nothing helped.
I tested when i do not open walkman app if i can do other apps and then its fine but once ive opend walkman nothing works properly anymore.
Now also my Sony smartTV has some problems well atleast i think its my phone bugging but i cant connect to it with Screenreproduction its says outputdevice is not ready or doesnt support DCHHP or something like that.
Is it the update the phones have from 4.2 to 4.3?
if so then i hope sony will come up with a solution ASAP!

Big problems after 10.4 upgrade

OK, here's the story...we bought some new 500GB drives for our XServe RAID and noticed that these require a 10.4.5 server, and we were running 10.3.9, so it was upgrade time. We have a headless XServe with only a CR-ROM drive, so I grabbed an external Firewire DVD drive, set the computer to boot from it in Preferences, rebooted, and ran the Admin Assistant program from my desktop G5. All went swimmingly well until it came to something like "optimizing performance"...it got to 30% and just sat there. I waited nearly 30 minutes with no change, then went up to the check the server. There was zero activity for several minutes, so with no way to see what was going on, I had little choice but to power down.
I opened the server, pulled out the XServe RAID card and popped the original video card in. When I booted the machine, it came up to the server configuration screen, so I figured everything was okay. I went through all the screens (all my old info was there) and that finished just fine. After that, I could not log in with the usual "admin" account. I got the spinning wheel for a few minutes, then it shakes the login window. I seem to be only able able to log in with root.
Logged in with root, everything seems to be working correctly until I load Workgroup Manager. It takes about 5 minutes to come up, then there's a several minute delay for each and every user I click on. But the data IS all there. On the client side, everybody can see the server, but nobody can log on. It tries for ages, then errors out. Email, web server, DHCP, etc. services are all running fine. The only problem seems to be with user authentication.
Any thoughts would be much appreciated. I set up the server originally, but my knowledge of OS X Server and Unix is very limited. We have only the one server, and I believe all users are in the "local node" (although I'm not all that sure what that even means!)

The server slowly ground to a halt overnight, so we had no choice but to format and install fresh. It was a nightmare, but thankfully, it's over.

BIG PROBLEM after Live Update installed

I installed the live update and now my system has crashed!
During my initial set up of this system I was having overheating issues. I stopped this by selecting the Advanced preset setting in the BIOS.
Well after installing the Live update the system restarted and installed the recommended updates for the mobo. I once again restarted the system only to have it shut doen within 30 - 40 seconds (never even got Windows to completely boot). I tried several times with the same outcome. I then remembered the over heating issue I had during the build. I looked back here to see how I solved the problem. I tried to preform the same steps I took earlier (going into BIOS and setting the advanced preset) each time being shut down before being able to accomplish the task. I am now left with a stone cold quiet system! I get the power switch to light up on the case and 2 of the LED's on the board turm blue. I have tried the mobo power button and the reset button with no luck!
Thoughts?

Quote from: Svet on 11-June-10, 22:01:34
Why you didn't tell this until now?
You tell that you've installed Live Update, not mention that you've proceed with BIOS update too...
Repeat again >>Clear CMOS Guide<< with power cord removed,
and leave 1 memory stick in 1st dimm, then try to boot
My apologies, you are correct. In the Live updates, BIOS was among the items to be updated.
I already tried the clear CMOS excatly as indicated in the link/video.

Hello, I have a big problem after a big bug on my iphone 5

Similar Messages

Maybe you are looking for